Linux man pages: T
- t1ascii(1)
- convert PostScript Type 1 font from binary to ASCII
- t1asm(1)
- assemble PostScript Type 1 font
- t1binary(1)
- convert PostScript Type 1 font from ASCII to binary
- t1disasm(1)
- disassemble PostScript Type 1 font
- t1libconfig(8)
- create t1lib.config/FontDataBase files for t1lib
- t1mac(1)
- translate PFA/PFB PostScript Type 1 font into Macintosh format
- t1mapper(1)
- help xdvi use all your t1 fonts
- t1unmac(1)
- translate Mac PostScript Type 1 font into PFA/PFB format
- t3d(1)
- clock using flying balls to display time
- tab2graph(1)
- turn tabular data into graph
- table(7)
- rows from table/view
- tablify(1)
- turn delimited text file into text table
- tabmerge(1)
- unify delimited files on common fields
- taboot(1)
- run taboot release script
- taboot-tasks(5)
- quick reference for built in tasks
- tabootv(1)
- run taboot release script
- tabrep(1)
- Replace tabulators
- tabs(1)
- set tabs on terminal
- tac(1)
- concatenate/print files in reverse
- tachk(1)
- Check validity of trust anchors in named.conf file
- tachyon(1)
- parallel ray-tracer
- tachyon-ogl(1)
- parallel ray-tracer
- tack(1)
- terminfo action checker
- tagmp3(1)
- change ID3v1 tags
- tags(3)
-
- tags(7)
- tagged files used for clustering extensions
- tagtest(8)
- Hyla FAX tag line testing program
- tai_add(3)
- add two struct tai
- tai_approx(3)
- return double-precision approximation
- tai_less(3)
- compare two struct tai
- tai_now(3)
- current time
- tai_pack(3)
- convert to external TAI64 format
- tai_sub(3)
- subtract two struct tai
- tai_unpack(3)
- convert to external TAI64 format
- taia_add(3)
- add two struct taia
- taia_addsec(3)
- add n seconds to struct taia
- taia_approx(3)
- return double-precision approximation
- taia_frac(3)
- current time
- taia_less(3)
- compare two struct taia
- taia_now(3)
- current time
- taia_pack(3)
- convert to external TAI64NA format
- taia_sub(3)
- subtract two struct taia
- taia_tai(3)
- current time
- taia_uint(3)
- convert seconds into struct taia
- taia_unpack(3)
- convert to external TAI64NA format
- tail(1)
- output last part of files
- tailf(1)
- follow growth of log file
- tailq_entry(3)
- implementations of lists, tail queues, and circular queues
- tailq_head(3)
- implementations of lists, tail queues, and circular queues
- tailq_init(3)
- implementations of lists, tail queues, and circular queues
- tailq_insert_after(3)
- implementations of lists, tail queues, and circular queues
- tailq_insert_head(3)
- implementations of lists, tail queues, and circular queues
- tailq_insert_tail(3)
- implementations of lists, tail queues, and circular queues
- tailq_remove(3)
- implementations of lists, tail queues, and circular queues
- taint(3)
- Perl utility extensions for tainted data
- talk(1)
- talk to another user
- talkd(8)
- remote user communication server
- talkfilters(1)
- GNU talk filters
- talloc(3)
- hierarchical reference counted memory pool system with destructors
- tally.control(8)
- keep track of newsgroup creations/deletions
- tan(3)
- tangent function
- tanf(3)
- tangent function
- tangle(1)
- translate WEB to Pascal
- tangram(3)
- Store pure objects in standard relational databases
- tangram(6)
- watch computer solve tangram puzzles
- tanh(3)
- hyperbolic tangent function
- tanhf(3)
- hyperbolic tangent function
- tanhl(3)
- hyperbolic tangent function
- tanl(3)
- tangent function
- tap2deb(1)
- create Debian packages which wrap .tap files
- tap2rpm(1)
- create RPM packages which wrap .tap files
- tapconvert(1)
- convert Twisted configurations from one format to another
- tape(1)
- Backup tape management
- tapechanger(1)
- tape changing script, using TapeChanger::MTX
- tapeinfo(1)
- report SCSI tape device info
- tapelist(5)
- list of Amanda volumes in use
- tar(1)
- manual page for tar 1.23
- tar_append_eof(3)
- append data to tar archives
- tar_append_file(3)
- append data to tar archives
- tar_append_regfile(3)
- append data to tar archives
- tar_append_tree(3)
- high-level tar archive change functions
- tar_block_read(3)
- macros to call read/write functions for correct tar archive type
- tar_block_write(3)
- macros to call read/write functions for correct tar archive type
- tar_close(3)
- access tar archive via handle
- tar_extract_all(3)
- high-level tar archive change functions
- tar_extract_blockdev(3)
- extract files from tar archive
- tar_extract_chardev(3)
- extract files from tar archive
- tar_extract_dir(3)
- extract files from tar archive
- tar_extract_fifo(3)
- extract files from tar archive
- tar_extract_file(3)
- extract files from tar archive
- tar_extract_glob(3)
- high-level tar archive change functions
- tar_extract_hardlink(3)
- extract files from tar archive
- tar_extract_regfile(3)
- extract files from tar archive
- tar_extract_symlink(3)
- extract files from tar archive
- tar_fd(3)
- access tar archive via handle
- tar_fdopen(3)
- access tar archive via handle
- tar_open(3)
- access tar archive via handle
- tar_set_file_perms(3)
- extract files from tar archive
- tar_skip_regfile(3)
- extract files from tar archive
- targetcli(8)
-
- targets(5)
- config file for iSCSI targets
- targets.conf(5)
- SCSI Target config File
- task(1)
- todo manager
- task-color(5)
- color tutorial for task todo manager
- task-faq(5)
- FAQ for task todo manager
- task-sync(5)
- tutorial for task data synchronization capabilities
- task-tutorial(5)
- tutorial for task todo manager
- taskjuggler(1)
- translates project descriptions into HTML/XML reports
- taskjugglerui(1)
- KDE graphical front-end for taskjuggler
- taskrc(5)
- config file for task command
- tasks(3)
- Want to help? These things need doing
- taskset(1)
- retrieve/set process's CPU affinity
- tbench(1)
- Measure disk throughput for simulated netbench run
- tbench_srv(1)
- Measure disk throughput for simulated netbench run
- tbl(1)
- format tables for troff
- tblgen(1)
- Target Description To C++ Code Generator
- tc(8)
- show/change traffic control settings
- tc-bfifo(8)
- Packet limited First In, First Out queue
- tc-cbq(8)
- Class Based Queueing
- tc-cbq-details(8)
- Class Based Queueing
- tc-htb(8)
- Hierarchy Token Bucket
- tc-pbfifo(8)
- Packet limited First In, First Out queue
- tc-pfifo(8)
- Packet limited First In, First Out queue
- tc-pfifo_fast(8)
- three-band first in, first out queue
- tc-prio(8)
- Priority qdisc
- tc-red(8)
- Random Early Detection
- tc-sfq(8)
- Stochastic Fairness Queueing
- tc-tbf(8)
- Token Bucket Filter
- tcadb(3)
- abstract database API
- tcamgr(1)
- utility of abstract database API
- tcatest(1)
- test cases of abstract database API
- tcbdb(3)
- B+ tree database API
- tcbmgr(1)
- utility of B+ tree database API
- tcbmttest(1)
- test cases of B+ tree database API
- tcbtest(1)
- test cases of B+ tree database API
- tccat(1)
- concatenate multimedia streams from medium/print on stdout
- tcdecode(1)
- read multimedia streams from medium, decode to raw format and print to stdout
- tcdemux(1)
- demultiplex program stream
- tcdrain(3)
- and set terminal attribs, line control, get and set baud rate
- tcexport(1)
- Simple frontend to transcode's encoding subsystem
- tcextract(1)
- read multimedia file from medium, extract or demultiplex requested stream and print to stdout
- tcfdb(3)
- fixed-length database API
- tcflow(3)
- and set terminal attribs, line control, get and set baud rate
- tcflush(3)
- and set terminal attribs, line control, get and set baud rate
- tcfmgr(1)
- utility of fixed-length database API
- tcfmttest(1)
- test cases of fixed-length database API
- tcftest(1)
- test cases of fixed-length database API
- tcgetattr(3)
- and set terminal attribs, line control, get and set baud rate
- tcgetpgrp(3)
- get/set terminal foreground process group
- tcgetsid(3)
- session ID
- tchdb(3)
- hash database API
- tchmgr(1)
- utility of hash database API
- tchmttest(1)
- test cases of hash database API
- tchtest(1)
- test cases of hash database API
- tcl_access(3)
- check file permissions/other attribs
- tcl_adderrorinfo(3)
- retrieve/record info about errors/other return options
- tcl_addobjerrorinfo(3)
- retrieve/record info about errors/other return options
- tcl_alertnotifier(3)
- event queue/notifier interfaces
- tcl_alloc(3)
- allocate/free heap memory
- tcl_allocstatbuf(3)
- procedures to interact with any filesystem
- tcl_allowexceptions(3)
- allow all exceptions in next script evaluation
- tcl_appendallobjtypes(3)
- change Tcl object types
- tcl_appendelement(3)
- change Tcl result
- tcl_appendexportlist(3)
- change namespaces
- tcl_appendformattoobj(3)
- change Tcl objects as strings
- tcl_appendlimitedtoobj(3)
- change Tcl objects as strings
- tcl_appendobjtoerrorinfo(3)
- retrieve/record info about errors/other return options
- tcl_appendobjtoobj(3)
- change Tcl objects as strings
- tcl_appendprintftoobj(3)
- change Tcl objects as strings
- tcl_appendresult(3)
- change Tcl result
- tcl_appendresultva(3)
- change Tcl result
- tcl_appendstringstoobj(3)
- change Tcl objects as strings
- tcl_appendstringstoobjva(3)
- change Tcl objects as strings
- tcl_appendtoobj(3)
- change Tcl objects as strings
- tcl_appendunicodetoobj(3)
- change Tcl objects as strings
- tcl_appinit(3)
- perform application-specific initialization
- tcl_asynccreate(3)
- handle asynchronous events
- tcl_asyncdelete(3)
- handle asynchronous events
- tcl_asyncinvoke(3)
- handle asynchronous events
- tcl_asyncmark(3)
- handle asynchronous events
- tcl_asyncready(3)
- handle asynchronous events
- tcl_attemptalloc(3)
- allocate/free heap memory
- tcl_attemptrealloc(3)
- allocate/free heap memory
- tcl_attemptsetobjlength(3)
- change Tcl objects as strings
- tcl_backgrounderror(3)
- report Tcl error that occurred in background processing
- tcl_backslash(3)
- parse backslash sequence
- tcl_badchanneloption(3)
- procedures for creating/manipulating channels
- tcl_callwhendeleted(3)
- Arrange for callback when interpreter is deleted
- tcl_cancelidlecall(3)
- invoke procedure when there are no pending events
- tcl_channelblockmodeproc(3)
- procedures for creating/manipulating channels
- tcl_channelbuffered(3)
- procedures for creating/manipulating channels
- tcl_channelclose2proc(3)
- procedures for creating/manipulating channels
- tcl_channelcloseproc(3)
- procedures for creating/manipulating channels
- tcl_channelflushproc(3)
- procedures for creating/manipulating channels
- tcl_channelgethandleproc(3)
- procedures for creating/manipulating channels
- tcl_channelgetoptionproc(3)
- procedures for creating/manipulating channels
- tcl_channelhandlerproc(3)
- procedures for creating/manipulating channels
- tcl_channelinputproc(3)
- procedures for creating/manipulating channels
- tcl_channelname(3)
- procedures for creating/manipulating channels
- tcl_channeloutputproc(3)
- procedures for creating/manipulating channels
- tcl_channelseekproc(3)
- procedures for creating/manipulating channels
- tcl_channelsetoptionproc(3)
- procedures for creating/manipulating channels
- tcl_channelthreadactionproc(3)
- procedures for creating/manipulating channels
- tcl_channeltruncateproc(3)
- procedures for creating/manipulating channels
- tcl_channelversion(3)
- procedures for creating/manipulating channels
- tcl_channelwatchproc(3)
- procedures for creating/manipulating channels
- tcl_channelwideseekproc(3)
- procedures for creating/manipulating channels
- tcl_chdir(3)
- change current working directory
- tcl_clearchannelhandlers(3)
- procedures for creating/manipulating channels
- tcl_close(3)
- buffered I/O facilities using channels
- tcl_commandcomplete(3)
- Check for unmatched braces in Tcl command
- tcl_commandtraceinfo(3)
- monitor renames/deletes of command
- tcl_concat(3)
- concatenate collection of strings
- tcl_concatobj(3)
- change Tcl objects as strings
- tcl_conditionfinalize(3)
- Tcl thread support
- tcl_conditionnotify(3)
- Tcl thread support
- tcl_conditionwait(3)
- Tcl thread support
- tcl_convertcountedelement(3)
- change Tcl lists
- tcl_convertelement(3)
- change Tcl lists
- tcl_converttotype(3)
- change Tcl object types
- tcl_createalias(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_createaliasobj(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_createchannel(3)
- procedures for creating/manipulating channels
- tcl_createchannelhandler(3)
- call procedure when channel becomes readable/writable
- tcl_createclosehandler(3)
- arrange for callbacks when channels are closed
- tcl_createcommand(3)
- implement new commands in C
- tcl_createencoding(3)
- procedures for creating/using encodings
- tcl_createensemble(3)
- change ensemble commands
- tcl_createeventsource(3)
- event queue/notifier interfaces
- tcl_createexithandler(3)
- end application/thread
- tcl_createfilehandler(3)
- associate procedure callbacks with files/devices
- tcl_createhashentry(3)
- procedures to manage hash tables
- tcl_createinterp(3)
- create/delete Tcl command interpreters
- tcl_createmathfunc(3)
- Define, query and enumerate math functions for expressions
- tcl_createnamespace(3)
- change namespaces
- tcl_createobjcommand(3)
- implement new commands in C
- tcl_createobjtrace(3)
- arrange for command execution to be traced
- tcl_createslave(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_createthread(3)
- Tcl thread support
- tcl_createthreadexithandler(3)
- end application/thread
- tcl_createtimerhandler(3)
- call procedure at given time
- tcl_createtrace(3)
- arrange for command execution to be traced
- tcl_cutchannel(3)
- procedures for creating/manipulating channels
- tcl_decrrefcount(3)
- change Tcl objects
- tcl_deleteassocdata(3)
- manage associations of string keys/user specified data with Tcl interpreters
- tcl_deletechannelhandler(3)
- call procedure when channel becomes readable/writable
- tcl_deleteclosehandler(3)
- arrange for callbacks when channels are closed
- tcl_deletecommand(3)
- implement new commands in C
- tcl_deletecommandfromtoken(3)
- implement new commands in C
- tcl_deleteevents(3)
- event queue/notifier interfaces
- tcl_deleteeventsource(3)
- event queue/notifier interfaces
- tcl_deleteexithandler(3)
- end application/thread
- tcl_deletefilehandler(3)
- associate procedure callbacks with files/devices
- tcl_deletehashentry(3)
- procedures to manage hash tables
- tcl_deletehashtable(3)
- procedures to manage hash tables
- tcl_deleteinterp(3)
- create/delete Tcl command interpreters
- tcl_deletenamespace(3)
- change namespaces
- tcl_deletethreadexithandler(3)
- end application/thread
- tcl_deletetimerhandler(3)
- call procedure at given time
- tcl_deletetrace(3)
- arrange for command execution to be traced
- tcl_detachchannel(3)
- buffered I/O facilities using channels
- tcl_detachpids(3)
- manage child processes in background
- tcl_dictobjdone(3)
- change Tcl objects as dictionaries
- tcl_dictobjfirst(3)
- change Tcl objects as dictionaries
- tcl_dictobjget(3)
- change Tcl objects as dictionaries
- tcl_dictobjnext(3)
- change Tcl objects as dictionaries
- tcl_dictobjput(3)
- change Tcl objects as dictionaries
- tcl_dictobjputkeylist(3)
- change Tcl objects as dictionaries
- tcl_dictobjremove(3)
- change Tcl objects as dictionaries
- tcl_dictobjremovekeylist(3)
- change Tcl objects as dictionaries
- tcl_dictobjsize(3)
- change Tcl objects as dictionaries
- tcl_discardinterpstate(3)
- save/restore interpreter's state
- tcl_discardresult(3)
- save/restore interpreter's state
- tcl_dontcallwhendeleted(3)
- Arrange for callback when interpreter is deleted
- tcl_dooneevent(3)
- wait for events/invoke event handlers
- tcl_dowhenidle(3)
- invoke procedure when there are no pending events
- tcl_dstringappend(3)
- change dynamic strings
- tcl_dstringappendelement(3)
- change dynamic strings
- tcl_dstringendsublist(3)
- change dynamic strings
- tcl_dstringfree(3)
- change dynamic strings
- tcl_dstringgetresult(3)
- change dynamic strings
- tcl_dstringinit(3)
- change dynamic strings
- tcl_dstringlength(3)
- change dynamic strings
- tcl_dstringresult(3)
- change dynamic strings
- tcl_dstringsetlength(3)
- change dynamic strings
- tcl_dstringstartsublist(3)
- change dynamic strings
- tcl_dstringtrunc(3)
- change dynamic strings
- tcl_dstringvalue(3)
- change dynamic strings
- tcl_dumpactivememory(3)
- Validated memory allocation interface
- tcl_duplicateobj(3)
- change Tcl objects
- tcl_eof(3)
- buffered I/O facilities using channels
- tcl_errnoid(3)
- change errno to store/retrieve error codes
- tcl_errnomsg(3)
- change errno to store/retrieve error codes
- tcl_eval(3)
- execute Tcl scripts
- tcl_evalex(3)
- execute Tcl scripts
- tcl_evalfile(3)
- execute Tcl scripts
- tcl_evalobjex(3)
- execute Tcl scripts
- tcl_evalobjv(3)
- execute Tcl scripts
- tcl_evaltokens(3)
- parse Tcl scripts/expressions
- tcl_evaltokensstandard(3)
- parse Tcl scripts/expressions
- tcl_eventuallyfree(3)
- avoid freeing storage while it is being used
- tcl_exit(3)
- end application/thread
- tcl_exitthread(3)
- end application/thread
- tcl_export(3)
- change namespaces
- tcl_exposecommand(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_exprboolean(3)
- evaluate expression
- tcl_exprbooleanobj(3)
- evaluate expression
- tcl_exprdouble(3)
- evaluate expression
- tcl_exprdoubleobj(3)
- evaluate expression
- tcl_exprlong(3)
- evaluate expression
- tcl_exprlongobj(3)
- evaluate expression
- tcl_exprobj(3)
- evaluate expression
- tcl_exprstring(3)
- evaluate expression
- tcl_externaltoutf(3)
- procedures for creating/using encodings
- tcl_externaltoutfdstring(3)
- procedures for creating/using encodings
- tcl_finalize(3)
- end application/thread
- tcl_finalizenotifier(3)
- event queue/notifier interfaces
- tcl_finalizethread(3)
- end application/thread
- tcl_findcommand(3)
- change namespaces
- tcl_findensemble(3)
- change ensemble commands
- tcl_findexecutable(3)
- identify/return name of binary file containing application
- tcl_findhashentry(3)
- procedures to manage hash tables
- tcl_findnamespace(3)
- change namespaces
- tcl_firsthashentry(3)
- procedures to manage hash tables
- tcl_flush(3)
- buffered I/O facilities using channels
- tcl_forgetimport(3)
- change namespaces
- tcl_format(3)
- change Tcl objects as strings
- tcl_free(3)
- allocate/free heap memory
- tcl_freeencoding(3)
- procedures for creating/using encodings
- tcl_freeparse(3)
- parse Tcl scripts/expressions
- tcl_freeresult(3)
- change Tcl result
- tcl_fsaccess(3)
- procedures to interact with any filesystem
- tcl_fschdir(3)
- procedures to interact with any filesystem
- tcl_fsconverttopathtype(3)
- procedures to interact with any filesystem
- tcl_fscopydirectory(3)
- procedures to interact with any filesystem
- tcl_fscopyfile(3)
- procedures to interact with any filesystem
- tcl_fscreatedirectory(3)
- procedures to interact with any filesystem
- tcl_fsdata(3)
- procedures to interact with any filesystem
- tcl_fsdeletefile(3)
- procedures to interact with any filesystem
- tcl_fsequalpaths(3)
- procedures to interact with any filesystem
- tcl_fsevalfile(3)
- procedures to interact with any filesystem
- tcl_fsevalfileex(3)
- procedures to interact with any filesystem
- tcl_fsfileattrsget(3)
- procedures to interact with any filesystem
- tcl_fsfileattrsset(3)
- procedures to interact with any filesystem
- tcl_fsfileattrstrings(3)
- procedures to interact with any filesystem
- tcl_fsfilesysteminfo(3)
- procedures to interact with any filesystem
- tcl_fsgetcwd(3)
- procedures to interact with any filesystem
- tcl_fsgetfilesystemforpath(3)
- procedures to interact with any filesystem
- tcl_fsgetinternalrep(3)
- procedures to interact with any filesystem
- tcl_fsgetnativepath(3)
- procedures to interact with any filesystem
- tcl_fsgetnormalizedpath(3)
- procedures to interact with any filesystem
- tcl_fsgetpathtype(3)
- procedures to interact with any filesystem
- tcl_fsgettranslatedpath(3)
- procedures to interact with any filesystem
- tcl_fsgettranslatedstringpath(3)
- procedures to interact with any filesystem
- tcl_fsjoinpath(3)
- procedures to interact with any filesystem
- tcl_fsjointopath(3)
- procedures to interact with any filesystem
- tcl_fslink(3)
- procedures to interact with any filesystem
- tcl_fslistvolumes(3)
- procedures to interact with any filesystem
- tcl_fsloadfile(3)
- procedures to interact with any filesystem
- tcl_fslstat(3)
- procedures to interact with any filesystem
- tcl_fsmatchindirectory(3)
- procedures to interact with any filesystem
- tcl_fsmountschanged(3)
- procedures to interact with any filesystem
- tcl_fsnewnativepath(3)
- procedures to interact with any filesystem
- tcl_fsopenfilechannel(3)
- procedures to interact with any filesystem
- tcl_fspathseparator(3)
- procedures to interact with any filesystem
- tcl_fsregister(3)
- procedures to interact with any filesystem
- tcl_fsremovedirectory(3)
- procedures to interact with any filesystem
- tcl_fsrenamefile(3)
- procedures to interact with any filesystem
- tcl_fssplitpath(3)
- procedures to interact with any filesystem
- tcl_fsstat(3)
- procedures to interact with any filesystem
- tcl_fsunregister(3)
- procedures to interact with any filesystem
- tcl_fsutime(3)
- procedures to interact with any filesystem
- tcl_getalias(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_getaliasobj(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_getassocdata(3)
- manage associations of string keys/user specified data with Tcl interpreters
- tcl_getbignumfromobj(3)
- change Tcl objects as integer values
- tcl_getboolean(3)
- convert from string to integer, double, or boolean
- tcl_getbooleanfromobj(3)
- store/retrieve boolean value in Tcl_Obj
- tcl_getbytearrayfromobj(3)
- change Tcl objects as arrays of bytes
- tcl_getchannel(3)
- buffered I/O facilities using channels
- tcl_getchannelbuffersize(3)
- procedures for creating/manipulating channels
- tcl_getchannelerror(3)
- functions to create/intercept Tcl errors by channel drivers
- tcl_getchannelerrorinterp(3)
- functions to create/intercept Tcl errors by channel drivers
- tcl_getchannelhandle(3)
- procedures for creating/manipulating channels
- tcl_getchannelinstancedata(3)
- procedures for creating/manipulating channels
- tcl_getchannelmode(3)
- procedures for creating/manipulating channels
- tcl_getchannelname(3)
- procedures for creating/manipulating channels
- tcl_getchannelnames(3)
- buffered I/O facilities using channels
- tcl_getchannelnamesex(3)
- buffered I/O facilities using channels
- tcl_getchanneloption(3)
- buffered I/O facilities using channels
- tcl_getchannelthread(3)
- procedures for creating/manipulating channels
- tcl_getchanneltype(3)
- procedures for creating/manipulating channels
- tcl_getcharlength(3)
- change Tcl objects as strings
- tcl_getcommandfromobj(3)
- implement new commands in C
- tcl_getcommandfullname(3)
- implement new commands in C
- tcl_getcommandinfo(3)
- implement new commands in C
- tcl_getcommandinfofromtoken(3)
- implement new commands in C
- tcl_getcommandname(3)
- implement new commands in C
- tcl_getcurrentnamespace(3)
- change namespaces
- tcl_getcurrentthread(3)
- event queue/notifier interfaces
- tcl_getcwd(3)
- change current working directory
- tcl_getdefaultencodingdir(3)
- procedures for creating/using encodings
- tcl_getdouble(3)
- convert from string to integer, double, or boolean
- tcl_getdoublefromobj(3)
- change Tcl objects as floating-point values
- tcl_getencoding(3)
- procedures for creating/using encodings
- tcl_getencodingfromobj(3)
- procedures for creating/using encodings
- tcl_getencodingname(3)
- procedures for creating/using encodings
- tcl_getencodingnamefromenvironment(3)
- procedures for creating/using encodings
- tcl_getencodingnames(3)
- procedures for creating/using encodings
- tcl_getencodingsearchpath(3)
- procedures for creating/using encodings
- tcl_getensembleflags(3)
- change ensemble commands
- tcl_getensemblemappingdict(3)
- change ensemble commands
- tcl_getensemblenamespace(3)
- change ensemble commands
- tcl_getensemblesubcommandlist(3)
- change ensemble commands
- tcl_getensembleunknownhandler(3)
- change ensemble commands
- tcl_geterrno(3)
- change errno to store/retrieve error codes
- tcl_getglobalnamespace(3)
- change namespaces
- tcl_gethashkey(3)
- procedures to manage hash tables
- tcl_gethashvalue(3)
- procedures to manage hash tables
- tcl_gethostname(3)
- name of local host
- tcl_getindexfromobj(3)
- lookup string in table of keywords
- tcl_getindexfromobjstruct(3)
- lookup string in table of keywords
- tcl_getint(3)
- convert from string to integer, double, or boolean
- tcl_getinterppath(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_getintfromobj(3)
- change Tcl objects as integer values
- tcl_getlongfromobj(3)
- change Tcl objects as integer values
- tcl_getmaster(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_getmathfuncinfo(3)
- Define, query and enumerate math functions for expressions
- tcl_getnameofexecutable(3)
- identify/return name of binary file containing application
- tcl_getnamespaceunknownhandler(3)
- change namespaces
- tcl_getobjresult(3)
- change Tcl result
- tcl_getobjtype(3)
- change Tcl object types
- tcl_getopenfile(3)
- Return FILE* for channel registered in given interpreter
- tcl_getostypefromobj(3)
- procedures to handle Macintosh resources/other Macintosh specifics
- tcl_getpathtype(3)
- change platform-dependent file paths
- tcl_getrange(3)
- change Tcl objects as strings
- tcl_getregexpfromobj(3)
- Pattern matching with regex
- tcl_getreturnoptions(3)
- retrieve/record info about errors/other return options
- tcl_gets(3)
- buffered I/O facilities using channels
- tcl_getservicemode(3)
- event queue/notifier interfaces
- tcl_getslave(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_getsobj(3)
- buffered I/O facilities using channels
- tcl_getstackedchannel(3)
- change stacked I/O channels
- tcl_getstdchannel(3)
- procedures for retrieving/replacing standard channels
- tcl_getstring(3)
- change Tcl objects as strings
- tcl_getstringfromobj(3)
- change Tcl objects as strings
- tcl_getstringresult(3)
- change Tcl result
- tcl_getthreaddata(3)
- Tcl thread support
- tcl_gettime(3)
- date/time
- tcl_gettopchannel(3)
- change stacked I/O channels
- tcl_getunichar(3)
- change Tcl objects as strings
- tcl_getunicode(3)
- change Tcl objects as strings
- tcl_getunicodefromobj(3)
- change Tcl objects as strings
- tcl_getvar(3)
- change Tcl variables
- tcl_getvar2(3)
- change Tcl variables
- tcl_getvar2ex(3)
- change Tcl variables
- tcl_getversion(3)
- version of library at runtime
- tcl_getwideintfromobj(3)
- change Tcl objects as integer values
- tcl_globaleval(3)
- execute Tcl scripts
- tcl_globalevalobj(3)
- execute Tcl scripts
- tcl_handlealloc(3)
- Dynamic, handle addressable tables
- tcl_handlefree(3)
- Dynamic, handle addressable tables
- tcl_handletblinit(3)
- Dynamic, handle addressable tables
- tcl_handletblrelease(3)
- Dynamic, handle addressable tables
- tcl_handletblusecount(3)
- Dynamic, handle addressable tables
- tcl_handlewalk(3)
- Dynamic, handle addressable tables
- tcl_handlexlate(3)
- Dynamic, handle addressable tables
- tcl_hashstats(3)
- procedures to manage hash tables
- tcl_hidecommand(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_import(3)
- change namespaces
- tcl_incrrefcount(3)
- change Tcl objects
- tcl_init(3)
- find/source initialization script
- tcl_initcustomhashtable(3)
- procedures to manage hash tables
- tcl_inithashtable(3)
- procedures to manage hash tables
- tcl_initmemory(3)
- Validated memory allocation interface
- tcl_initnotifier(3)
- event queue/notifier interfaces
- tcl_initobjhashtable(3)
- procedures to manage hash tables
- tcl_initstubs(3)
- initialize Tcl stubs mechanism
- tcl_inputblocked(3)
- buffered I/O facilities using channels
- tcl_inputbuffered(3)
- buffered I/O facilities using channels
- tcl_interp(3)
- client-visible fields of interpreter structures
- tcl_interpdeleted(3)
- create/delete Tcl command interpreters
- tcl_invalidatestringrep(3)
- change Tcl objects
- tcl_ischannelexisting(3)
- procedures for creating/manipulating channels
- tcl_ischannelregistered(3)
- procedures for creating/manipulating channels
- tcl_ischannelshared(3)
- procedures for creating/manipulating channels
- tcl_isensemble(3)
- change ensemble commands
- tcl_issafe(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_isshared(3)
- change Tcl objects
- tcl_isstandardchannel(3)
- buffered I/O facilities using channels
- tcl_joinpath(3)
- change platform-dependent file paths
- tcl_jointhread(3)
- Tcl thread support
- tcl_limitaddhandler(3)
- manage/check resource limits on interpreters
- tcl_limitcheck(3)
- manage/check resource limits on interpreters
- tcl_limitexceeded(3)
- manage/check resource limits on interpreters
- tcl_limitgetcommands(3)
- manage/check resource limits on interpreters
- tcl_limitgetgranularity(3)
- manage/check resource limits on interpreters
- tcl_limitgettime(3)
- manage/check resource limits on interpreters
- tcl_limitready(3)
- manage/check resource limits on interpreters
- tcl_limitremovehandler(3)
- manage/check resource limits on interpreters
- tcl_limitsetcommands(3)
- manage/check resource limits on interpreters
- tcl_limitsetgranularity(3)
- manage/check resource limits on interpreters
- tcl_limitsettime(3)
- manage/check resource limits on interpreters
- tcl_limittypeenabled(3)
- manage/check resource limits on interpreters
- tcl_limittypeexceeded(3)
- manage/check resource limits on interpreters
- tcl_limittypereset(3)
- manage/check resource limits on interpreters
- tcl_limittypeset(3)
- manage/check resource limits on interpreters
- tcl_linkvar(3)
- link Tcl variable to C variable
- tcl_listmathfuncs(3)
- Define, query and enumerate math functions for expressions
- tcl_listobjappendelement(3)
- change Tcl objects as lists
- tcl_listobjappendlist(3)
- change Tcl objects as lists
- tcl_listobjgetelements(3)
- change Tcl objects as lists
- tcl_listobjindex(3)
- change Tcl objects as lists
- tcl_listobjlength(3)
- change Tcl objects as lists
- tcl_listobjreplace(3)
- change Tcl objects as lists
- tcl_logcommandinfo(3)
- retrieve/record info about errors/other return options
- tcl_macconverttextresource(3)
- procedures to handle Macintosh resources/other Macintosh specifics
- tcl_macevalresource(3)
- procedures to handle Macintosh resources/other Macintosh specifics
- tcl_macfindresource(3)
- procedures to handle Macintosh resources/other Macintosh specifics
- tcl_macseteventproc(3)
- procedures to handle Macintosh resources/other Macintosh specifics
- tcl_main(3)
- main program/event loop definition for Tcl-based applications
- tcl_makefilechannel(3)
- buffered I/O facilities using channels
- tcl_makesafe(3)
- manage multiple Tcl interpreters, aliases and hidden commands
- tcl_maketcpclientchannel(3)
- procedures to open channels using TCP sockets
- tcl_mem_debug(3)
- Compile-time flag to enable Tcl memory debugging
- tcl_merge(3)
- change Tcl lists
- tcl_mutexfinalize(3)
- Tcl thread support
- tcl_mutexlock(3)
- Tcl thread support
- tcl_mutexunlock(3)
- Tcl thread support
- tcl_newbignumobj(3)
- change Tcl objects as integer values
- tcl_newbooleanobj(3)
- store/retrieve boolean value in Tcl_Obj
- tcl_newbytearrayobj(3)
- change Tcl objects as arrays of bytes
- tcl_newdictobj(3)
- change Tcl objects as dictionaries
- tcl_newdoubleobj(3)
- change Tcl objects as floating-point values
- tcl_newintobj(3)
- change Tcl objects as integer values
- tcl_newlistobj(3)
- change Tcl objects as lists
- tcl_newlongobj(3)
- change Tcl objects as integer values
- tcl_newobj(3)
- change Tcl objects
- tcl_newostypeobj(3)
- procedures to handle Macintosh resources/other Macintosh specifics
- tcl_newstringobj(3)
- change Tcl objects as strings
- tcl_newunicodeobj(3)
- change Tcl objects as strings
- tcl_newwideintobj(3)
- change Tcl objects as integer values
- tcl_nexthashentry(3)
- procedures to manage hash tables
- tcl_notifychannel(3)
- procedures for creating/manipulating channels
- tcl_numutfchars(3)
- routines for manipulating UTF-8 strings
- tcl_objgetvar2(3)
- change Tcl variables
- tcl_objprintf(3)
- change Tcl objects as strings
- tcl_objsetvar2(3)
- change Tcl variables
- tcl_opencommandchannel(3)
- buffered I/O facilities using channels
- tcl_openfilechannel(3)
- buffered I/O facilities using channels
- tcl_opentcpclient(3)
- procedures to open channels using TCP sockets
- tcl_opentcpserver(3)
- procedures to open channels using TCP sockets
- tcl_outputbuffered(3)
- buffered I/O facilities using channels
- tcl_panic(3)
- report fatal error/abort
- tcl_panicva(3)
- report fatal error/abort
- tcl_parsebraces(3)
- parse Tcl scripts/expressions
- tcl_parsecommand(3)
- parse Tcl scripts/expressions
- tcl_parseexpr(3)
- parse Tcl scripts/expressions
- tcl_parsequotedstring(3)
- parse Tcl scripts/expressions
- tcl_parsevar(3)
- parse Tcl scripts/expressions
- tcl_parsevarname(3)
- parse Tcl scripts/expressions
- tcl_pkgpresent(3)
- package version control
- tcl_pkgpresentex(3)
- package version control
- tcl_pkgprovide(3)
- package version control
- tcl_pkgprovideex(3)
- package version control
- tcl_pkgrequire(3)
- package version control
- tcl_pkgrequireex(3)
- package version control
- tcl_pkgrequireproc(3)
- package version control
- tcl_posixerror(3)
- retrieve/record info about errors/other return options
- tcl_preserve(3)
- avoid freeing storage while it is being used
- tcl_printdouble(3)
- Convert floating value to string
- tcl_putenv(3)
- procedures to change environment
- tcl_querytimeproc(3)
- date/time
- tcl_queueevent(3)
- event queue/notifier interfaces
- tcl_read(3)
- buffered I/O facilities using channels
- tcl_readchars(3)
- buffered I/O facilities using channels
- tcl_readraw(3)
- buffered I/O facilities using channels
- tcl_realloc(3)
- allocate/free heap memory
- tcl_reapdetachedprocs(3)
- manage child processes in background
- tcl_recordandeval(3)
- save command on history list before evaluating
- tcl_recordandevalobj(3)
- save command on history list before evaluating
- tcl_regexpcompile(3)
- Pattern matching with regex
- tcl_regexpexec(3)
- Pattern matching with regex
- tcl_regexpexecobj(3)
- Pattern matching with regex
- tcl_regexpgetinfo(3)
- Pattern matching with regex
- tcl_regexpmatch(3)
- Pattern matching with regex
- tcl_regexpmatchobj(3)
- Pattern matching with regex
- tcl_regexprange(3)
- Pattern matching with regex
- tcl_registerchannel(3)
- buffered I/O facilities using channels
- tcl_registerconfig(3)
- procedures to register embedded config info
- tcl_registerobjtype(3)
- change Tcl object types
- tcl_release(3)
- avoid freeing storage while it is being used
- tcl_resetresult(3)
- change Tcl result
- tcl_restoreinterpstate(3)
- save/restore interpreter's state
- tcl_restoreresult(3)
- save/restore interpreter's state
- tcl_saveinterpstate(3)
- save/restore interpreter's state
- tcl_saveresult(3)
- save/restore interpreter's state
- tcl_scancountedelement(3)
- change Tcl lists
- tcl_scanelement(3)
- change Tcl lists
- tcl_seek(3)
- buffered I/O facilities using channels
- tcl_serviceall(3)
- event queue/notifier interfaces
- tcl_serviceevent(3)
- event queue/notifier interfaces
- tcl_setassocdata(3)
- manage associations of string keys/user specified data with Tcl interpreters
- tcl_setbignumobj(3)
- change Tcl objects as integer values
- tcl_setbooleanobj(3)
- store/retrieve boolean value in Tcl_Obj
- tcl_setbytearraylength(3)
- change Tcl objects as arrays of bytes
- tcl_setbytearrayobj(3)
- change Tcl objects as arrays of bytes
- tcl_setchannelbuffersize(3)
- procedures for creating/manipulating channels
- tcl_setchannelerror(3)
- functions to create/intercept Tcl errors by channel drivers
- tcl_setchannelerrorinterp(3)
- functions to create/intercept Tcl errors by channel drivers
- tcl_setchanneloption(3)
- buffered I/O facilities using channels
- tcl_setcommandinfo(3)
- implement new commands in C
- tcl_setcommandinfofromtoken(3)
- implement new commands in C
- tcl_setdefaultencodingdir(3)
- procedures for creating/using encodings
- tcl_setdoubleobj(3)
- change Tcl objects as floating-point values
- tcl_setencodingsearchpath(3)
- procedures for creating/using encodings
- tcl_setensembleflags(3)
- change ensemble commands
- tcl_setensemblemappingdict(3)
- change ensemble commands
- tcl_setensemblesubcommandlist(3)
- change ensemble commands
- tcl_setensembleunknownhandler(3)
- change ensemble commands
- tcl_seterrno(3)
- change errno to store/retrieve error codes
- tcl_seterrorcode(3)
- retrieve/record info about errors/other return options
- tcl_seterrorcodeva(3)
- retrieve/record info about errors/other return options
- tcl_setexitproc(3)
- end application/thread
- tcl_sethashvalue(3)
- procedures to manage hash tables
- tcl_setintobj(3)
- change Tcl objects as integer values
- tcl_setlistobj(3)
- change Tcl objects as lists
- tcl_setlongobj(3)
- change Tcl objects as integer values
- tcl_setmainloop(3)
- main program/event loop definition for Tcl-based applications
- tcl_setmaxblocktime(3)
- event queue/notifier interfaces
- tcl_setnamespaceunknownhandler(3)
- change namespaces
- tcl_setobjerrorcode(3)
- retrieve/record info about errors/other return options
- tcl_setobjlength(3)
- change Tcl objects as strings
- tcl_setobjresult(3)
- change Tcl result
- tcl_setostypeobj(3)
- procedures to handle Macintosh resources/other Macintosh specifics
- tcl_setpanicproc(3)
- report fatal error/abort
- tcl_setrecursionlimit(3)
- set maximum allowable nesting depth in interpreter
- tcl_setresult(3)
- change Tcl result
- tcl_setreturnoptions(3)
- retrieve/record info about errors/other return options
- tcl_setservicemode(3)
- event queue/notifier interfaces
- tcl_setstdchannel(3)
- procedures for retrieving/replacing standard channels
- tcl_setstringobj(3)
- change Tcl objects as strings
- tcl_setsystemencoding(3)
- procedures for creating/using encodings
- tcl_settimeproc(3)
- date/time
- tcl_settimer(3)
- event queue/notifier interfaces
- tcl_setunicodeobj(3)
- change Tcl objects as strings
- tcl_setvar(3)
- change Tcl variables
- tcl_setvar2(3)
- change Tcl variables
- tcl_setvar2ex(3)
- change Tcl variables
- tcl_setwideintobj(3)
- change Tcl objects as integer values
- tcl_signalid(3)
- Convert signal codes
- tcl_signalmsg(3)
- Convert signal codes
- tcl_sleep(3)
- delay execution for given number of milliseconds
- tcl_sourcercfile(3)
- source Tcl rc file
- tcl_splicechannel(3)
- procedures for creating/manipulating channels
- tcl_splitlist(3)
- change Tcl lists
- tcl_splitpath(3)
- change platform-dependent file paths
- tcl_stackchannel(3)
- change stacked I/O channels
- tcl_standardchannels(3)
- How Tcl library deals with standard channels
- tcl_stat(3)
- check file permissions/other attribs
- tcl_staticpackage(3)
- make statically linked package available via 'load' command
- tcl_stringcasematch(3)
- test whether string matches pattern
- tcl_stringmatch(3)
- test whether string matches pattern
- tcl_substobj(3)
- perform substitutions on Tcl objects
- tcl_takebignumfromobj(3)
- change Tcl objects as integer values
- tcl_tell(3)
- buffered I/O facilities using channels
- tcl_threadalert(3)
- event queue/notifier interfaces
- tcl_threadqueueevent(3)
- event queue/notifier interfaces
- tcl_tracecommand(3)
- monitor renames/deletes of command
- tcl_tracevar(3)
- monitor accesses to variable
- tcl_tracevar2(3)
- monitor accesses to variable
- tcl_translatefilename(3)
- convert file name to native form/replace tilde with home directory
- tcl_truncatechannel(3)
- buffered I/O facilities using channels
- tcl_ungets(3)
- buffered I/O facilities using channels
- tcl_unichar(3)
- routines for manipulating UTF-8 strings
- tcl_unicharatindex(3)
- routines for manipulating UTF-8 strings
- tcl_unicharcasematch(3)
- routines for manipulating UTF-8 strings
- tcl_unicharisalnum(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharisalpha(3)
- routines for classification of Tcl_UniChar char
- tcl_unichariscontrol(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharisdigit(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharisgraph(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharislower(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharisprint(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharispunct(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharisspace(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharisupper(3)
- routines for classification of Tcl_UniChar char
- tcl_unichariswordchar(3)
- routines for classification of Tcl_UniChar char
- tcl_unicharlen(3)
- routines for manipulating UTF-8 strings
- tcl_unicharncasecmp(3)
- routines for manipulating UTF-8 strings
- tcl_unicharncmp(3)
- routines for manipulating UTF-8 strings
- tcl_unichartolower(3)
- routines for manipulating case of Unicode char/UTF-8 strings
- tcl_unichartotitle(3)
- routines for manipulating case of Unicode char/UTF-8 strings
- tcl_unichartoupper(3)
- routines for manipulating case of Unicode char/UTF-8 strings
- tcl_unichartoutf(3)
- routines for manipulating UTF-8 strings
- tcl_unichartoutfdstring(3)
- routines for manipulating UTF-8 strings
- tcl_unlinkvar(3)
- link Tcl variable to C variable
- tcl_unregisterchannel(3)
- buffered I/O facilities using channels
- tcl_unsetvar(3)
- change Tcl variables
- tcl_unsetvar2(3)
- change Tcl variables
- tcl_unstackchannel(3)
- change stacked I/O channels
- tcl_untracecommand(3)
- monitor renames/deletes of command
- tcl_untracevar(3)
- monitor accesses to variable
- tcl_untracevar2(3)
- monitor accesses to variable
- tcl_updatelinkedvar(3)
- link Tcl variable to C variable
- tcl_upvar(3)
- link one variable to another
- tcl_upvar2(3)
- link one variable to another
- tcl_utfatindex(3)
- routines for manipulating UTF-8 strings
- tcl_utfbackslash(3)
- routines for manipulating UTF-8 strings
- tcl_utfcharcomplete(3)
- routines for manipulating UTF-8 strings
- tcl_utffindfirst(3)
- routines for manipulating UTF-8 strings
- tcl_utffindlast(3)
- routines for manipulating UTF-8 strings
- tcl_utfnext(3)
- routines for manipulating UTF-8 strings
- tcl_utfprev(3)
- routines for manipulating UTF-8 strings
- tcl_utftoexternal(3)
- procedures for creating/using encodings
- tcl_utftoexternaldstring(3)
- procedures for creating/using encodings
- tcl_utftolower(3)
- routines for manipulating case of Unicode char/UTF-8 strings
- tcl_utftotitle(3)
- routines for manipulating case of Unicode char/UTF-8 strings
- tcl_utftounichar(3)
- routines for manipulating UTF-8 strings
- tcl_utftounichardstring(3)
- routines for manipulating UTF-8 strings
- tcl_utftoupper(3)
- routines for manipulating case of Unicode char/UTF-8 strings
- tcl_validateallmemory(3)
- Validated memory allocation interface
- tcl_vareval(3)
- execute Tcl scripts
- tcl_varevalva(3)
- execute Tcl scripts
- tcl_vartraceinfo(3)
- monitor accesses to variable
- tcl_vartraceinfo2(3)
- monitor accesses to variable
- tcl_waitforevent(3)
- event queue/notifier interfaces
- tcl_waitpid(3)
- manage child processes in background
- tcl_wintchartoutf(3)
- procedures for creating/using encodings
- tcl_winutftotchar(3)
- procedures for creating/using encodings
- tcl_write(3)
- buffered I/O facilities using channels
- tcl_writechars(3)
- buffered I/O facilities using channels
- tcl_writeobj(3)
- buffered I/O facilities using channels
- tcl_writeraw(3)
- buffered I/O facilities using channels
- tcl_wrongnumargs(3)
- make standard error message for wrong number of arguments
- tclcommandwriting(3)
- Writing C language extensions to Tcl
- tcldot(3)
- graph change in tcl
- tcldot(n)
- graph change in tcl
- tclist(3)
- utility API
- tclsh(1)
- Simple shell containing Tcl interpreter
- tclx_init(3)
- Extended Tcl initialization
- tclx_keyedlistdelete(3)
- Keyed list management routines
- tclx_keyedlistget(3)
- Keyed list management routines
- tclx_keyedlistgetkeys(3)
- Keyed list management routines
- tclx_keyedlistset(3)
- Keyed list management routines
- tclx_main(3)
- Extended Tcl initialization
- tclx_newkeyedlistobj(3)
- Keyed list management routines
- tclxcmd_init(3)
- Extended Tcl initialization
- tclxinit(3)
- Extended Tcl initialization
- tcmap(3)
- utility API
- tcmdb(3)
- utility API
- tcmodchain(1)
- Query compatibily of transcode modules chains
- tcmodinfo(1)
- Get/Set info in transcode modules
- tcmpool(3)
- utility API
- tcp(7)
- TCP protocol
- tcp_table(5)
- Postfix client/server table lookup protocol
- tcpbridge(1)
- Bridge network traffic across two interfaces
- tcpbug(1)
- TCP/IP connection bugging device
- tcpconnect(1)
- general TCP/IP client
- tcpd(8)
- access control facility for internet services
- tcpd_selinux(8)
- Security Enhanced Policy for tcpd processes
- tcpdump(8)
- dump traffic on network
- tcpflow(1)
- TCP flow recorder
- tcpick(8)
- tcp stream sniffer/connection tracker
- tcpkill(8)
- kill TCP connections on LAN
- tcplay(8)
- manage TrueCrypt volumes
- tcplisten(1)
- general TCP/IP server
- tcpnice(8)
- slow down TCP connections on LAN
- tcppm(8)
- TCP port mapper
- tcpprep(1)
- Create tcpreplay cache cache file from pcap file
- tcpprof(1)
- report profile of network traffic
- tcpreen(1)
- TCP stream monitoring tool
- tcpreplay(1)
- Replay network traffic stored in pcap files
- tcpreplay-edit(1)
- Replay network traffic stored in pcap files
- tcprewrite(1)
- Rewrite packets in pcap file
- tcprobe(1)
- probe multimedia streams from medium/print info on stdout
- tcprules(1)
-
- tcpshow(1)
- decode tcpdump savefile
- tcpslice(8)
- extract pieces of/merge together tcpdump files
- tcpspray(1)
- TCP/IP bandwidth measurement tool
- tcpspray6(1)
- TCP/IP bandwidth measurement tool
- tcpstat(1)
- report network interface statistics
- tcptool(1)
- Data transfer using TCP protocol
- tcptrace(1)
- TCP connection analysis tool
- tcptraceroute(1)
- traceroute implementation using TCP packets
- tcptraceroute6(8)
- IPv6 traceroute tool
- tcptrack(1)
- Monitor TCP connections on network
- tcpvmexportd(1)
- transcode PVM3 export interface
- tcpxtract(1)
- manual page for tcpxtract
- tcscan(1)
- scan multimedia streams from medium/print info on stdout
- tcsd(8)
- daemon that manages Trusted Computing resources
- tcsd.conf(5)
- config file for trousers TCS daemon
- tcsendbreak(3)
- and set terminal attribs, line control, get and set baud rate
- tcsetattr(3)
- and set terminal attribs, line control, get and set baud rate
- tcsetpgrp(3)
- get/set terminal foreground process group
- tcsh(1)
- C shell with file name completion/editing
- tctdb(3)
- table database API
- tctmgr(1)
- utility of table database API
- tctmttest(1)
- test cases of table database API
- tctree(3)
- utility API
- tcttest(1)
- test cases of table database API
- tcucodec(1)
- popular encoders/decoders
- tcumttest(1)
- test cases of on-memory database API
- tcutest(1)
- test cases of utility API
- tcutil(3)
- utility API
- tcxmlcheck(1)
- Check info in smil input file
- tcxstr(3)
- utility API
- tdbbackup(8)
- tool for backing up/for validating integrity of samba .tdb files
- tdbdump(8)
- tool for printing contents of TDB file
- tdbrestore(8)
- tool for creating TDB file out of tdbdump output
- tdbtool(8)
- change contents TDB files
- tdelete(3)
- manage binary tree
- tdestroy(3)
- manage binary tree
- tdfx(4)
- 3Dfx video driver
- tdx-util(8)
- Tradindexed overview change utility
- tea(1)
- give access to Crypt::Tea.pm
- teachjove(1)
- learn how to use JOVE editor
- tee(1)
- read from stdin/write to stdout/files
- tee(2)
- duplicating pipe content
- teh(3)
- This is teh, best module evar!
- tek2plot(1)
- translate Tektronix files to other graphics formats
- tek4957(4)
- Tektronix 4957 input driver
- telepathy-gabble(8)
- Telepathy connection manager for XMPP
- telepathy-salut(8)
- Telepathy connection manager for link-local XMPP
- telepathy_gabble_selinux(8)
- Security Enhanced Policy for telepathy_gabble processes
- telepathy_idle_selinux(8)
- Security Enhanced Policy for telepathy_idle processes
- telepathy_mission_control_selinux(8)
- Security Enhanced Policy for telepathy_mission_control processes
- telepathy_msn_selinux(8)
- Security Enhanced Policy for telepathy_msn processes
- telepathy_salut_selinux(8)
- Security Enhanced Policy for telepathy_salut processes
- telepathy_selinux(8)
- Security Enhanced Policy for telepathy processes
- telepathy_sofiasip_selinux(8)
- Security Enhanced Policy for telepathy_sofiasip processes
- telepathy_stream_engine_selinux(8)
- Security Enhanced Policy for telepathy_stream_engine processes
- telepathy_sunshine_selinux(8)
- Security Enhanced Policy for telepathy_sunshine processes
- telescope(1)
-
- telescoped(8)
- control telescope, server
- telinit(8)
- change system runlevel
- telldir(3)
- return current location in directory stream
- telnet(1)
- user interface to TELNET protocol
- telnet-chatd(1)
- simplistic TELNET chat server
- telnet-client(1)
- simplistic TELNET client
- telnet-probe(1)
- lightweight telnet-like port probe
- telnet-proxy(1)
- create TELNET debugging proxy
- telnetd(8)
- DARPA telnet protocol server
- telnetd_selinux(8)
- Security Enhanced Policy for telnetd processes
- temperature(3)
- class to get informations about your battery
- template(3)
- Front-end module to Template Toolkit
- tempnam(3)
- create name for temporary file
- tentakel(1)
- distributed command execution
- teredo-mire(1)
- Stateless Teredo IPv6 responder
- term(5)
- format of compiled term file
- term(7)
- conventions for naming terminal types
- term_attrs(3)
- curses environment query routines
- termattrs(3)
- curses environment query routines
- termcap(5)
- terminal capability database
- terminal(1)
- Terminal emulator for X
- terminator(1)
- Multiple GNOME terminals in one window
- terminator_config(5)
- config file for Terminator terminal emulator
- terminfo(5)
- terminal capability data base
- termio(7)
- System V terminal driver interface
- termios(3)
- and set terminal attribs, line control, get and set baud rate
- termname(3)
- curses environment query routines
- test(1)
- check file types/compare values
- test(3)
- provides simple framework for writing test scripts
- test-filter-module(1)
- tester for Courier::Filter modules
- test_configuration.pl(1)
- Load your config to verify Nagios::Object is compatible with it. -c: path to your main config file -l: relaxed mode - allow unrecognized attribs on objects ...
- test_server(3)
- This module provides support for test suite authors
- test_server(6)
- Test Server for manual/automatic testing of Erlang code
- test_server_ctrl(3)
- This module provides low level interface to Test Server
- testaccel(6)
- test old style blitter functions/vga_ext_set()
- testapp_selinux(8)
- Security Enhanced Policy for testapp processes
- testbddcircuit(3)
- debugs bdd circuit
- testdisk(1)
- Scan/repair disk partitions
- testdisk(8)
- Scan/repair disk partitions
- testgl(6)
- test vgagl library
- testlibraw(1)
- run basic functionality tests on libraw1394
- testlinear(6)
- test linear frame buffer
- testparm(1)
- check smb.conf config file for internal correctness
- testsaslauthd(8)
- test utility for SASL authentication server
- tethereal_selinux(8)
- Security Enhanced Policy for tethereal processes
- tevent_queue_tutorial(3)
- tevent_queue tutorial
- tex(1)
- text formatting/typesetting
- tex2lyx(1)
- translate well-behaved LaTeX into LyX
- tex2mail(1)
- TeX to ascii math prettyprinter
- tex4ht(1)
- system for authoring hypertext with TeX/friends
- texconfig(1)
- configures TeXLive
- texconfig-sys(1)
- configures TeXLive
- texdoc(1)
- Utility to look up TeX documentation
- texdoctk(1)
- GUI for easier access of TeX package/program documentations
- texexec(1)
- front end to ConTeXt typesetting system
- texexpand(1)
- expand \input/\include statements in TeX file
- texfind(1)
- search for text in TeX input files
- texfont(1)
- font installation tool for ConTeXt
- texhash(1)
- create ls-R databases
- texi2dvi(1)
- convert Texinfo documents to DVI
- texi2dvi4a2ps(1)
- Compile Texinfo/LaTeX files to DVI/PDF
- texi2html(1)
- Texinfo to HTML converter
- texi2pdf(1)
- create PDF file from Texinfo file
- texindex(1)
- sort Texinfo index files
- texinfo(5)
- software documentation system
- texlinks(1)
- maintain symbolic links from format to engine
- texlinks(8)
- maintain symbolic links from format to engine
- texmacs(1)
- WYSIWYG mathematical text editor
- texmake(1)
- Prepare texture for use with Pixie
- texmfstart(1)
- run ConTeXt scripts, make ConTeXt wrapper scripts, view documents
- texpire(8)
- delete old news articles/repair leafnode news
- texshow(1)
- ConTeXt command/parameter reference
- text(3)
- I18N text abstraction
- text2htm(1)
- Text to HTML converter
- text2html(1)
- Convert plain text to HTML
- text2lat(1)
- Text to LaTeX converter
- text2pcap(1)
- make capture file from ASCII hexdump of packets
- text_height(3)
- Returns height of font in pixels. Allegro game programming library
- text_length(3)
- Returns length of string in pixels. Allegro game programming library
- textdomain(3)
- set domain for future gettext() calls
- texteroids(1)
- test your mousing skills on spinning text
- textfmt(1)
- convert text to P OST S CRIPT ® for facsimile transmission
- textlayout(3)
- routines to measure and display single-font, multi-line, justified text
- textmode(1)
- save/restore complete SVGA status for textmode
- textools(1)
- make TeX map files, afm files, fix texmf trees
- textout_centre_ex(3)
- Writes centered string on bitmap. Allegro game programming library
- textout_ex(3)
- Writes string on bitmap. Allegro game programming library
- textout_justify_ex(3)
- Draws justified text within region. Allegro game programming library
- textout_right_ex(3)
- Writes right aligned string on bitmap. Allegro game programming library
- textprintf_centre_ex(3)
- Formatted centered output of string. Allegro game programming library
- textprintf_ex(3)
- Formatted output of string. Allegro game programming library
- textprintf_justify_ex(3)
- Formatted justified output of string. Allegro game programming library
- textprintf_right_ex(3)
- Formatted right aligned output of string. Allegro game programming library
- texutil(1)
- ConTeXt utility program
- tf(1)
- TinyFugue, MUD client
- tf-tool(1)
- Utility to acquire/to verify fingerprints
- tfind(3)
- manage binary tree
- tfmtodit(1)
- create font files for use with groff -Tdvi
- tftopl(1)
- convert TeX font metric files to property lists
- tftp(1)
- IPv4 Trivial File Transfer Protocol client
- tftp(3)
- Trivial FTP
- tftpd(8)
- IPv4 Trivial File Transfer Protocol server
- tftpd_selinux(8)
- Security Enhanced Policy for tftpd processes
- tgamma(3)
- true gamma function
- tgammaf(3)
- true gamma function
- tgammal(3)
- true gamma function
- tgatoppm(1)
- convert TrueVision Targa file to PPM image
- tgetent(3)
- direct curses interface to terminfo capability database
- tgetflag(3)
- direct curses interface to terminfo capability database
- tgetnum(3)
- direct curses interface to terminfo capability database
- tgetstr(3)
- direct curses interface to terminfo capability database
- tgif(1)
- Xlib based interactive 2-D drawing facility under X11. Supports hierarchical construction of drawings/easy navigation between sets of drawings. It's also ...
- tgkill(2)
- send signal to thread
- tgoto(3)
- direct curses interface to terminfo capability database
- tgt-admin(8)
- SCSI Target config Tool
- tgt-setup-lun(8)
- Helper script that creates target, adds device to target, and defines initiators that can connect to target
- tgtadm(8)
- SCSI Target Administration Utility
- tgtd_selinux(8)
- Security Enhanced Policy for tgtd processes
- th_finish(3)
- set fields of tar file header
- th_get_crc(3)
- extract
- th_get_devmajor(3)
- extract
- th_get_devminor(3)
- extract
- th_get_gid(3)
- extract
- th_get_linkname(3)
- extract
- th_get_mode(3)
- extract
- th_get_mtime(3)
- extract
- th_get_pathname(3)
- extract
- th_get_size(3)
- extract
- th_get_uid(3)
- extract
- th_isblk(3)
- extract
- th_ischr(3)
- extract
- th_isdir(3)
- extract
- th_isfifo(3)
- extract
- th_islnk(3)
- extract
- th_islonglink(3)
- extract
- th_islongname(3)
- extract
- th_isreg(3)
- extract
- th_issym(3)
- extract
- th_print(3)
- print out info about tar file header
- th_print_long_ls(3)
- print out info about tar file header
- th_read(3)
- read/write file header block from tar archive
- th_set_device(3)
- set fields of tar file header
- th_set_from_stat(3)
- set fields of tar file header
- th_set_group(3)
- set fields of tar file header
- th_set_link(3)
- set fields of tar file header
- th_set_mode(3)
- set fields of tar file header
- th_set_path(3)
- set fields of tar file header
- th_set_type(3)
- set fields of tar file header
- th_set_user(3)
- set fields of tar file header
- th_write(3)
- read/write file header block from tar archive
- the(3)
- This is teh, best module evar!
- theme(1)
- create web page from template file
- theschwartz(3)
- reliable job queue
- thin_check(8)
- repair thin provisioning metadata on device/file
- thin_dump(8)
- dump thin provisioning metadata from device/file to standard
- thin_restore(8)
- restore thin provisioning metadata file to device/
- thin_selinux(8)
- Security Enhanced Policy for thin processes
- thinkjettopbm(1)
- convert HP ThinkJet printer commands file to PBM
- thornbird(1)
- Bird in Thornbush fractal
- thornbird(6)
- Bird in Thornbush fractal
- thread(3)
- Tcl thread support
- threads(3)
- Perl interpreter-based threads
- three_finger_flag(3)
- Flag to desactivate emergency exit key combination. Allegro game programming library
- threed(6)
- svgalib 3d demo
- threedkit(7)
- set of functions for 3D support
- throttle(1)
- bandwidth limiting pipe
- thtpasswd(1)
- change HTTP-server password files
- thttpd(8)
- tiny/turbo/throttling HTTP server
- thumbnail(1)
- create TIFF file with thumbnail images
- thumbpdf(1)
- make thumbnail images for PDF file created with pdftex
- thunar(1)
- File Manager for Xfce Desktop Environment
- tic(1)
- terminfo entry-description compiler
- tickadj(8)
- set time-related kernel variables
- tidy(1)
- validate, correct, and pretty-print HTML files
- tie(1)
- merge/apply WEB change files
- tiff2bw(1)
- convert color TIFF image to greyscale
- tiff2fax(8)
- convert TIFF for facsimile transmission by Hyla FAX
- tiff2pdf(1)
- convert TIFF image to PDF document
- tiff2ps(1)
- convert TIFF image to PostScript™
- tiff2rgba(1)
- convert TIFF image to RGBA color space
- tiffbuffer(3)
- I/O buffering control routines
- tiffcheck(8)
- check TIFF for Hyla FAX conversion requirements
- tiffchecktile(3)
- tile-related utility routines
- tiffclientopen(3)
- open TIFF file for reading/writing
- tiffclose(3)
- close previously opened TIFF file
- tiffcmp(1)
- compare two TIFF files
- tiffcodec(3)
- codec-related utility routines
- tiffcolor(3)
- color conversion routines
- tiffcomputestrip(3)
- strip-related utility routines
- tiffcomputetile(3)
- tile-related utility routines
- tiffcp(1)
- copy TIFF file
- tiffcrop(1)
- select, copy, crop, convert, extract,/process one or more TIFF files
- tiffcurrentdirectory(3)
- query routines
- tiffcurrentrow(3)
- query routines
- tiffcurrentstrip(3)
- query routines
- tiffcurrenttile(3)
- query routines
- tiffdatawidth(3)
- size of TIFF data types
- tiffdefaultstripsize(3)
- strip-related utility routines
- tiffdefaulttilesize(3)
- tile-related utility routines
- tiffdither(1)
- convert greyscale image to bilevel using dithering
- tiffdump(1)
- print verbatim info about TIFF files
- tifferror(3)
- library error handling interface
- tifffdopen(3)
- open TIFF file for reading/writing
- tifffilename(3)
- query routines
- tifffileno(3)
- query routines
- tifffindcodec(3)
- codec-related utility routines
- tiffflush(3)
- flush pending writes to open TIFF file
- tiffflushdata(3)
- flush pending writes to open TIFF file
- tifffree(3)
- memory management-related functions for use with TIFF files
- tiffgetfield(3)
- value of tag in open TIFF file
- tiffgetfielddefaulted(3)
- value of tag in open TIFF file
- tiffgetmode(3)
- query routines
- tifficc(1)
- little cms ICC profile applier for TIFF
- tiffinfo(1)
- print info about TIFF files
- tiffisbyteswapped(3)
- query routines
- tiffismsb2lsb(3)
- query routines
- tiffistiled(3)
- query routines
- tiffisupsampled(3)
- query routines
- tifflastdirectory(3)
- query routines
- tiffmalloc(3)
- memory management-related functions for use with TIFF files
- tiffmedian(1)
- apply median cut algorithm to data in TIFF file
- tiffmemcmp(3)
- memory management-related functions for use with TIFF files
- tiffmemcpy(3)
- memory management-related functions for use with TIFF files
- tiffmemory(3)
- memory management-related functions for use with TIFF files
- tiffmemset(3)
- memory management-related functions for use with TIFF files
- tiffnumberofstrips(3)
- strip-related utility routines
- tiffnumberoftiles(3)
- tile-related utility routines
- tiffopen(3)
- open TIFF file for reading/writing
- tiffprintdirectory(3)
- print description of TIFF directory
- tiffquery(3)
- query routines
- tiffreadbuffersetup(3)
- I/O buffering control routines
- tiffreaddirectory(3)
- contents of next directory in open TIFF file
- tiffreadencodedstrip(3)
- read/decode strip of data from open TIFF file
- tiffreadencodedtile(3)
- read/decode tile of data from open TIFF file
- tiffreadrawstrip(3)
- return undecoded contents of strip of data from open TIFF file
- tiffreadrawtile(3)
- return undecoded tile of data from open TIFF file
- tiffreadrgbaimage(3)
- read/decode image into fixed-format raster
- tiffreadrgbaimageoriented(3)
- read/decode image into fixed-format raster
- tiffreadrgbastrip(3)
- read/decode image strip into fixed-format raster
- tiffreadrgbatile(3)
- read/decode image tile into fixed-format raster
- tiffreadscanline(3)
- read/decode scanline of data from open TIFF file
- tiffreadtile(3)
- read/decode tile of data from open TIFF file
- tiffrealloc(3)
- memory management-related functions for use with TIFF files
- tiffregistercodec(3)
- codec-related utility routines
- tiffreversebits(3)
- byte-/bit-swapping routines
- tiffrewritedirectory(3)
- current directory in open TIFF file
- tiffrgbaimage(3)
- read/decode image into raster
- tiffrgbaimagebegin(3)
- read/decode image into raster
- tiffrgbaimageend(3)
- read/decode image into raster
- tiffrgbaimageget(3)
- read/decode image into raster
- tiffrgbaimageok(3)
- read/decode image into raster
- tiffscanlinesize(3)
- return size of various items associated with open TIFF file
- tiffset(1)
- set field in TIFF header
- tiffsetdirectory(3)
- set current directory for open TIFF file
- tiffseterrorhandler(3)
- library error handling interface
- tiffsetfield(3)
- set value of tag in TIFF file open for writing
- tiffsetsubdirectory(3)
- set current directory for open TIFF file
- tiffsetwarninghandler(3)
- library warning interface
- tiffsize(3)
- return size of various items associated with open TIFF file
- tiffsplit(1)
- split multi-image TIFF into single-image TIFF files
- tiffstrip(3)
- strip-related utility routines
- tiffstripsize(3)
- strip-related utility routines
- tiffswab(3)
- byte-/bit-swapping routines
- tiffswabarrayoflong(3)
- byte-/bit-swapping routines
- tiffswabarrayofshort(3)
- byte-/bit-swapping routines
- tiffswablong(3)
- byte-/bit-swapping routines
- tiffswabshort(3)
- byte-/bit-swapping routines
- tifftile(3)
- tile-related utility routines
- tifftilerowsize(3)
- tile-related utility routines
- tifftilesize(3)
- tile-related utility routines
- tifftopnm(1)
- convert TIFF file into PNM image
- tiffunregistercodec(3)
- codec-related utility routines
- tiffvgetfield(3)
- value of tag in open TIFF file
- tiffvgetfielddefaulted(3)
- value of tag in open TIFF file
- tiffvsetfield(3)
- set value of tag in TIFF file open for writing
- tiffvstripsize(3)
- strip-related utility routines
- tiffvtilesize(3)
- tile-related utility routines
- tiffwarning(3)
- library warning interface
- tiffwritebuffersetup(3)
- I/O buffering control routines
- tiffwritedirectory(3)
- current directory in open TIFF file
- tiffwriteencodedstrip(3)
- compress/write strip of data to open TIFF file
- tiffwriteencodedtile(3)
- compress/write tile of data to open TIFF file
- tiffwriterawstrip(3)
- strip of raw data to open TIFF file
- tiffwriterawtile(3)
- tile of raw data to open TIFF file
- tiffwritescanline(3)
- scanline to open TIFF file
- tiffwritetile(3)
- encode/write tile of data to open TIFF file
- tificc2(1)
- little cms ICC profile applier for TIFF
- tig(1)
- text-mode interface for git
- tigerdeep(1)
- Compute/compare MD5 message digests
- tigetflag(3)
- curses interfaces to terminfo database
- tigetnum(3)
- curses interfaces to terminfo database
- tigetstr(3)
- curses interfaces to terminfo database
- tigmanual(7)
- text-mode interface for git
- tigrc(5)
- tig config file
- tiki2po(1)
- Convert TikiWiki's language.php files to GetText PO files
- tile-linux-gnu-addr2line(1)
- convert addresses into file names/line numbers
- tile-linux-gnu-ar(1)
- create, modify, and extract from archives
- tile-linux-gnu-as(1)
- portable GNU assembler
- tile-linux-gnu-c++filt(1)
- Demangle C++/Java symbols
- tile-linux-gnu-cpp(1)
- C Preprocessor
- tile-linux-gnu-dlltool(1)
- Create files needed to build/use DLLs
- tile-linux-gnu-elfedit(1)
- Update ELF header of ELF files
- tile-linux-gnu-gcc(1)
- GNU project C/C++ compiler
- tile-linux-gnu-gcov(1)
- coverage testing tool
- tile-linux-gnu-gprof(1)
- call graph profile data
- tile-linux-gnu-ld(1)
- GNU linker
- tile-linux-gnu-nlmconv(1)
- converts object code into NLM
- tile-linux-gnu-nm(1)
- symbols from object files
- tile-linux-gnu-objcopy(1)
- copy/translate object files
- tile-linux-gnu-objdump(1)
- info from object files
- tile-linux-gnu-ranlib(1)
- make index to archive
- tile-linux-gnu-readelf(1)
- Displays info about ELF files
- tile-linux-gnu-size(1)
- section sizes/total size
- tile-linux-gnu-strings(1)
- print strings of printable char in files
- tile-linux-gnu-strip(1)
- Discard symbols from object files
- tile-linux-gnu-windmc(1)
- generates Windows message resources
- tile-linux-gnu-windres(1)
- change Windows resources
- time(1)
- time simple command/give resource usage
- time(2)
- time in seconds
- time(3)
- supplimentary time functions
- time(7)
- overview of time/timers
- time.conf(5)
- config file for pam_time module
- timebat(1)
- utility for time correction
- timed-process(1)
- Run background process for limited amount of time
- timegm(3)
- inverses of gmtime/localtime
- timelocal(3)
- inverses of gmtime/localtime
- timelord(8)
- Macintosh time server daemon
- timeout(1)
- run command with time limit
- timeout(3)
- curses input options
- timer(3)
- Timer Functions
- timer_create(2)
- create POSIX per-process timer
- timer_create(3)
- create per-process timer
- timer_delete(2)
- delete POSIX per-process timer
- timer_delete(3)
- delete per-process timer
- timer_getoverrun(2)
- overrun count for POSIX per-process timer
- timer_getoverrun(3)
- per-process timers
- timer_gettime(2)
- arm/disarm/fetch state of POSIX per-process timer
- timer_gettime(3)
- per-process timers
- timer_settime(2)
- arm/disarm/fetch state of POSIX per-process timer
- timer_settime(3)
- per-process timers
- timeradd(3)
- timeval operations
- timerclear(3)
- timeval operations
- timercmp(3)
- timeval operations
- timerfd_create(2)
- timers that notify via file descriptors
- timerfd_gettime(2)
- timers that notify via file descriptors
- timerfd_settime(2)
- timers that notify via file descriptors
- timerisset(3)
- timeval operations
- timersub(3)
- timeval operations
- times(1)
- bash built-in commands, see bash
- times(2)
- process times
- times(3)
- process/waited-for child process times
- timetrans(1)
- Converts time into time
- timetunnel(6)
- Plasma tunnels fade in/out
- timezone(3)
- initialize time conversion info
- timsieved(8)
- CMU hack for getting sieve scripts onto server
- tinc.conf(5)
- tinc daemon config
- tincd(8)
- tinc VPN daemon
- tinydns(8)
- DNS server
- tinydns-data(1)
-
- tinydns-edit(1)
-
- tinydns-get(1)
- tinydns server records
- tinyproxy(8)
- light-weight HTTP proxy daemon
- tinyproxy.conf(5)
- Tinyproxy HTTP proxy daemon config file
- tiobench(1)
- Threaded I/O bench
- tiotest(1)
- Threaded I/O bench
- tis-620(7)
- ISO 8859-11 char set encoded in octal, decimal, and hexadecimal
- tito(8)
- manage RPM based projects using git
- tito.props(5)
- Settings file for whole git repository with multiple packages. build.py.props - Setting file in package directory, which override values in tito.props
- titorc(5)
- user specific settings file for 'tito'
- tixwish(1)
- Windowing shell for interpreting Tix commands
- tk(3)
- graphical user interface toolkit for Perl
- tk_3dbordercolor(3)
- draw borders with three-dimensional appearance
- tk_3dbordergc(3)
- draw borders with three-dimensional appearance
- tk_3dhorizontalbevel(3)
- draw borders with three-dimensional appearance
- tk_3dverticalbevel(3)
- draw borders with three-dimensional appearance
- tk_addoption(3)
- Add option to option database
- tk_alloc3dborderfromobj(3)
- draw borders with three-dimensional appearance
- tk_allocbitmapfromobj(3)
- maintain database of single-plane pixmaps
- tk_alloccolorfromobj(3)
- maintain database of colors
- tk_alloccursorfromobj(3)
- maintain database of cursors
- tk_allocfontfromobj(3)
- maintain database of fonts
- tk_attachhwnd(3)
- manage interactions between Windows handle/X window
- tk_attributes(3)
- info from Tk's local data structure
- tk_bindevent(3)
- invoke scripts in response to X events
- tk_canvasdrawablecoords(3)
- utility procedures for canvas type managers
- tk_canvaseventuallyredraw(3)
- utility procedures for canvas type managers
- tk_canvasgetcoord(3)
- utility procedures for canvas type managers
- tk_canvaspsbitmap(3)
- utility procedures for generating Postscript for canvases
- tk_canvaspscolor(3)
- utility procedures for generating Postscript for canvases
- tk_canvaspsfont(3)
- utility procedures for generating Postscript for canvases
- tk_canvaspspath(3)
- utility procedures for generating Postscript for canvases
- tk_canvaspsstipple(3)
- utility procedures for generating Postscript for canvases
- tk_canvaspsy(3)
- utility procedures for generating Postscript for canvases
- tk_canvassetstippleorigin(3)
- utility procedures for canvas type managers
- tk_canvastagsoption(3)
- utility procedures for canvas type managers
- tk_canvastextinfo(3)
- additional info for managing text items in canvases
- tk_canvastkwin(3)
- utility procedures for canvas type managers
- tk_canvaswindowcoords(3)
- utility procedures for canvas type managers
- tk_changes(3)
- info from Tk's local data structure
- tk_changewindowattributes(3)
- change window config/attribs
- tk_charbbox(3)
- routines to measure and display single-font, multi-line, justified text
- tk_class(3)
- set/retrieve window's class
- tk_clearselection(3)
- Deselect selection
- tk_clipboardappend(3)
- Manage clipboard
- tk_clipboardclear(3)
- Manage clipboard
- tk_collapsemotionevents(3)
- Add window event to Tcl event queue
- tk_colormap(3)
- info from Tk's local data structure
- tk_computetextlayout(3)
- routines to measure and display single-font, multi-line, justified text
- tk_configureinfo(3)
- process config options for widgets
- tk_configurevalue(3)
- process config options for widgets
- tk_configurewidget(3)
- process config options for widgets
- tk_configurewindow(3)
- change window config/attribs
- tk_coordstowindow(3)
- Find window containing point
- tk_createbinding(3)
- invoke scripts in response to X events
- tk_createbindingtable(3)
- invoke scripts in response to X events
- tk_createclientmessagehandler(3)
- associate procedure callback with ClientMessage type X events
- tk_createerrorhandler(3)
- handle X protocol errors
- tk_createeventhandler(3)
- associate procedure callback with X event
- tk_creategenerichandler(3)
- associate procedure callback with all X events
- tk_createimagetype(3)
- define new kind of image
- tk_createitemtype(3)
- define new kind of canvas item
- tk_createoptiontable(3)
- process config options
- tk_createphotoimageformat(3)
- define new file format for photo images
- tk_createselhandler(3)
- arrange to handle requests for selection
- tk_createwindow(3)
- create/delete window
- tk_createwindowfrompath(3)
- create/delete window
- tk_definebitmap(3)
- maintain database of single-plane pixmaps
- tk_definecursor(3)
- change window config/attribs
- tk_deleteallbindings(3)
- invoke scripts in response to X events
- tk_deletebinding(3)
- invoke scripts in response to X events
- tk_deletebindingtable(3)
- invoke scripts in response to X events
- tk_deleteclientmessagehandler(3)
- associate procedure callback with ClientMessage type X events
- tk_deleteerrorhandler(3)
- handle X protocol errors
- tk_deleteeventhandler(3)
- associate procedure callback with X event
- tk_deletegenerichandler(3)
- associate procedure callback with all X events
- tk_deleteimage(3)
- Destroy image
- tk_deleteoptiontable(3)
- process config options
- tk_deleteselhandler(3)
- arrange to handle requests for selection
- tk_depth(3)
- info from Tk's local data structure
- tk_destroywindow(3)
- create/delete window
- tk_display(3)
- info from Tk's local data structure
- tk_displayname(3)
- info from Tk's local data structure
- tk_distancetotextlayout(3)
- routines to measure and display single-font, multi-line, justified text
- tk_draw3dpolygon(3)
- draw borders with three-dimensional appearance
- tk_draw3drectangle(3)
- draw borders with three-dimensional appearance
- tk_drawchars(3)
- routines to measure/display simple single-line strings
- tk_drawfocushighlight(3)
- draw traversal highlight ring for widget
- tk_drawtextlayout(3)
- routines to measure and display single-font, multi-line, justified text
- tk_fill3dpolygon(3)
- draw borders with three-dimensional appearance
- tk_fill3drectangle(3)
- draw borders with three-dimensional appearance
- tk_findphoto(3)
- change image data stored in photo image
- tk_fontid(3)
- accessor functions for fonts
- tk_free3dborder(3)
- draw borders with three-dimensional appearance
- tk_free3dborderfromobj(3)
- draw borders with three-dimensional appearance
- tk_freebitmap(3)
- maintain database of single-plane pixmaps
- tk_freebitmapfromobj(3)
- maintain database of single-plane pixmaps
- tk_freecolor(3)
- maintain database of colors
- tk_freecolorfromobj(3)
- maintain database of colors
- tk_freecolormap(3)
- allocate/free colormaps
- tk_freeconfigoptions(3)
- process config options
- tk_freecursor(3)
- maintain database of cursors
- tk_freecursorfromobj(3)
- maintain database of cursors
- tk_freefont(3)
- maintain database of fonts
- tk_freefontfromobj(3)
- maintain database of fonts
- tk_freegc(3)
- maintain database of read-only graphics contexts
- tk_freeimage(3)
- use image in widget
- tk_freeoptions(3)
- process config options for widgets
- tk_freepixmap(3)
- allocate/free pixmaps
- tk_freesavedoptions(3)
- process config options
- tk_freetextlayout(3)
- routines to measure and display single-font, multi-line, justified text
- tk_freexid(3)
- make X resource identifier available for reuse
- tk_geometryrequest(3)
- specify desired geometry/internal border for window
- tk_get3dborder(3)
- draw borders with three-dimensional appearance
- tk_get3dborderfromobj(3)
- draw borders with three-dimensional appearance
- tk_getallbindings(3)
- invoke scripts in response to X events
- tk_getanchor(3)
- translate between strings/anchor positions
- tk_getanchorfromobj(3)
- translate between strings/anchor positions
- tk_getatomname(3)
- manage cache of X atoms
- tk_getbinding(3)
- invoke scripts in response to X events
- tk_getbitmap(3)
- maintain database of single-plane pixmaps
- tk_getbitmapfromobj(3)
- maintain database of single-plane pixmaps
- tk_getcapstyle(3)
- translate between strings/cap styles
- tk_getcolor(3)
- maintain database of colors
- tk_getcolorbyvalue(3)
- maintain database of colors
- tk_getcolorfromobj(3)
- maintain database of colors
- tk_getcolormap(3)
- allocate/free colormaps
- tk_getcursor(3)
- maintain database of cursors
- tk_getcursorfromdata(3)
- maintain database of cursors
- tk_getcursorfromobj(3)
- maintain database of cursors
- tk_getdash(3)
- convert from string to valid dash structure
- tk_getfont(3)
- maintain database of fonts
- tk_getfontfromobj(3)
- maintain database of fonts
- tk_getfontmetrics(3)
- accessor functions for fonts
- tk_getgc(3)
- maintain database of read-only graphics contexts
- tk_gethinstance(3)
- global application instance handle
- tk_gethwnd(3)
- manage interactions between Windows handle/X window
- tk_getimage(3)
- use image in widget
- tk_getimagemasterdata(3)
- define new kind of image
- tk_getitemtypes(3)
- define new kind of canvas item
- tk_getjoinstyle(3)
- translate between strings/join styles
- tk_getjustify(3)
- translate between strings/justification styles
- tk_getjustifyfromobj(3)
- translate between strings/justification styles
- tk_getmmfromobj(3)
- translate between strings/screen units
- tk_getnummainwindows(3)
- functions for querying main window info
- tk_getoption(3)
- option from option database
- tk_getoptioninfo(3)
- process config options
- tk_getoptionvalue(3)
- process config options
- tk_getpixels(3)
- translate between strings/screen units
- tk_getpixelsfromobj(3)
- translate between strings/screen units
- tk_getpixmap(3)
- allocate/free pixmaps
- tk_getrelief(3)
- translate between strings/relief values
- tk_getrelieffromobj(3)
- translate between strings/relief values
- tk_getrootcoords(3)
- Compute root-window coordinates of window
- tk_getscreenmm(3)
- translate between strings/screen units
- tk_getscrollinfo(3)
- parse arguments for scrolling commands
- tk_getscrollinfoobj(3)
- parse arguments for scrolling commands
- tk_getselection(3)
- contents of selection
- tk_getuid(3)
- convert from string to unique identifier
- tk_getuserinactivetime(3)
- discover user inactivity time
- tk_getvisual(3)
- translate from string to visual
- tk_getvrootgeometry(3)
- location/size of virtual root for window
- tk_grab(3)
- change grab state in application
- tk_handleevent(3)
- invoke event handlers for window system events
- tk_height(3)
- info from Tk's local data structure
- tk_hwndtowindow(3)
- Find Tk's window info for Windows window
- tk_idtowindow(3)
- Find Tk's window info for X window
- tk_imagechanged(3)
- notify widgets that image needs to be redrawn
- tk_init(3)
- add Tk to interpreter/make new Tk application
- tk_initconsolechannels(3)
- Install console channels as standard channels
- tk_initimageargs(3)
- define new kind of image
- tk_initoptions(3)
- process config options
- tk_initstubs(3)
- initialize Tk stubs mechanism
- tk_internalborderbottom(3)
- info from Tk's local data structure
- tk_internalborderleft(3)
- info from Tk's local data structure
- tk_internalborderright(3)
- info from Tk's local data structure
- tk_internalbordertop(3)
- info from Tk's local data structure
- tk_internatom(3)
- manage cache of X atoms
- tk_interp(3)
- info from Tk's local data structure
- tk_intersecttextlayout(3)
- routines to measure and display single-font, multi-line, justified text
- tk_iscontainer(3)
- info from Tk's local data structure
- tk_isembedded(3)
- info from Tk's local data structure
- tk_ismapped(3)
- info from Tk's local data structure
- tk_istoplevel(3)
- info from Tk's local data structure
- tk_main(3)
- main program for Tk-based applications
- tk_mainloop(3)
- loop for events until all windows are deleted
- tk_maintaingeometry(3)
- maintain geometry of one window relative to another
- tk_mainwindow(3)
- functions for querying main window info
- tk_makewindowexist(3)
- create/delete window
- tk_managegeometry(3)
- arrange to handle geometry requests for window
- tk_mapwindow(3)
- map/unmap window
- tk_measurechars(3)
- routines to measure/display simple single-line strings
- tk_minreqheight(3)
- info from Tk's local data structure
- tk_minreqwidth(3)
- info from Tk's local data structure
- tk_moveresizewindow(3)
- change window config/attribs
- tk_movetoplevelwindow(3)
- Adjust position of top-level window
- tk_movewindow(3)
- change window config/attribs
- tk_name(3)
- convert between names/window tokens
- tk_nameof3dborder(3)
- draw borders with three-dimensional appearance
- tk_nameofanchor(3)
- translate between strings/anchor positions
- tk_nameofbitmap(3)
- maintain database of single-plane pixmaps
- tk_nameofcapstyle(3)
- translate between strings/cap styles
- tk_nameofcolor(3)
- maintain database of colors
- tk_nameofcursor(3)
- maintain database of cursors
- tk_nameoffont(3)
- maintain database of fonts
- tk_nameofimage(3)
- Return name of image
- tk_nameofjoinstyle(3)
- translate between strings/join styles
- tk_nameofjustify(3)
- translate between strings/justification styles
- tk_nameofrelief(3)
- translate between strings/relief values
- tk_nametowindow(3)
- convert between names/window tokens
- tk_offset(3)
- process config options
- tk_ownselection(3)
- make window owner of primary selection
- tk_parent(3)
- info from Tk's local data structure
- tk_parseargv(3)
- process options
- tk_pathname(3)
- convert between names/window tokens
- tk_photoblank(3)
- change image data stored in photo image
- tk_photoexpand(3)
- change image data stored in photo image
- tk_photogetimage(3)
- change image data stored in photo image
- tk_photogetsize(3)
- change image data stored in photo image
- tk_photoputblock(3)
- change image data stored in photo image
- tk_photoputzoomedblock(3)
- change image data stored in photo image
- tk_photosetsize(3)
- change image data stored in photo image
- tk_pointtochar(3)
- routines to measure and display single-font, multi-line, justified text
- tk_postscriptfontname(3)
- accessor functions for fonts
- tk_preservecolormap(3)
- allocate/free colormaps
- tk_queuewindowevent(3)
- Add window event to Tcl event queue
- tk_redrawimage(3)
- use image in widget
- tk_reqheight(3)
- info from Tk's local data structure
- tk_reqwidth(3)
- info from Tk's local data structure
- tk_resetuserinactivetime(3)
- discover user inactivity time
- tk_resizewindow(3)
- change window config/attribs
- tk_restackwindow(3)
- Change window's position in stacking order
- tk_restoresavedoptions(3)
- process config options
- tk_restrictevents(3)
- filter/selectively delay X events
- tk_safeinit(3)
- add Tk to interpreter/make new Tk application
- tk_screen(3)
- info from Tk's local data structure
- tk_screennumber(3)
- info from Tk's local data structure
- tk_setappname(3)
- Set name of application for 'send' commands
- tk_setbackgroundfromborder(3)
- draw borders with three-dimensional appearance
- tk_setcaretpos(3)
- set display caret location
- tk_setclass(3)
- set/retrieve window's class
- tk_setclassprocs(3)
- register widget specific procedures
- tk_setgrid(3)
- control grid for interactive resizing
- tk_setinternalborder(3)
- specify desired geometry/internal border for window
- tk_setinternalborderex(3)
- specify desired geometry/internal border for window
- tk_setminimumrequestsize(3)
- specify desired geometry/internal border for window
- tk_setoptions(3)
- process config options
- tk_setwindowbackground(3)
- change window config/attribs
- tk_setwindowbackgroundpixmap(3)
- change window config/attribs
- tk_setwindowborder(3)
- change window config/attribs
- tk_setwindowborderpixmap(3)
- change window config/attribs
- tk_setwindowborderwidth(3)
- change window config/attribs
- tk_setwindowcolormap(3)
- change window config/attribs
- tk_setwindowvisual(3)
- change visual characteristics of window
- tk_sizeofbitmap(3)
- maintain database of single-plane pixmaps
- tk_sizeofimage(3)
- use image in widget
- tk_strictmotif(3)
- Return value of tk_strictMotif variable
- tk_textlayouttopostscript(3)
- routines to measure and display single-font, multi-line, justified text
- tk_textwidth(3)
- routines to measure/display simple single-line strings
- tk_uid(3)
- convert from string to unique identifier
- tk_undefinecursor(3)
- change window config/attribs
- tk_underlinechars(3)
- routines to measure/display simple single-line strings
- tk_underlinetextlayout(3)
- routines to measure and display single-font, multi-line, justified text
- tk_ungrab(3)
- change grab state in application
- tk_unmaintaingeometry(3)
- maintain geometry of one window relative to another
- tk_unmapwindow(3)
- map/unmap window
- tk_unsetgrid(3)
- control grid for interactive resizing
- tk_visual(3)
- info from Tk's local data structure
- tk_width(3)
- info from Tk's local data structure
- tk_windowid(3)
- info from Tk's local data structure
- tk_x(3)
- info from Tk's local data structure
- tk_y(3)
- info from Tk's local data structure
- tkconch(1)
- connect to SSH servers graphically
- tkcvs(1)
- Tk/Tcl Graphical Interface to CVS/Subversion
- tkdict(1)
- perl client for accessing network dictionary servers
- tkgate(1)
- Tcl/Tk based digital circuit editor/simulator
- tkgvizmakefile(1)
- create Tk graphs from Makefiles
- tkill(1)
- Terminate LAM on one node
- tkill(2)
- send signal to thread
- tkinitstubs(3)
- initialize Tk stubs mechanism
- tkjpeg(1)
- simple JPEG viewer using perl/Tk
- tknewsbiff(1)
- pop up window when news appears
- tkremind(1)
- graphical front-end to Remind calendar program
- tkspline(3)
- additional smoothing method for canvas items
- tkweb(1)
- rough/ready web browser
- tkx_init(3)
- Extended Tcl initialization
- tkx_main(3)
- Extended Tcl initialization
- tld_check_4(3)
- API function
- tld_check_4t(3)
- API function
- tld_check_4tz(3)
- API function
- tld_check_4z(3)
- API function
- tld_check_8z(3)
- API function
- tld_check_lz(3)
- API function
- tld_default_table(3)
- API function
- tld_get_4(3)
- API function
- tld_get_4z(3)
- API function
- tld_get_table(3)
- API function
- tld_get_z(3)
- API function
- tld_strerror(3)
- API function
- tload(1)
- graphic representation of system load average
- tlogin(1)
- Cisco/Foundry login script
- tls_prune(8)
- prune expired sessions from TLS sessions database
- tlsa(1)
- Create/verify RFC-6698 TLSA DNS records
- tlsmgr(8)
- Postfix TLS session cache/PRNG manager
- tm(3)
- task management API
- tmail(1)
- Mail Delivery Module
- tmconfig(8)
- configure system for Serial/EMP management functions, such as Terminal Mode, and share port with Serial Console
- tmpfile(3)
- create temporary file
- tmpnam(3)
- create name for temporary file
- tmpnam_r(3)
- create name for temporary file
- tmpreaper_selinux(8)
- Security Enhanced Policy for tmpreaper processes
- tmpwatch(8)
- removes files which haven't been accessed for period of time
- tmux(1)
- terminal multiplexer
- tmw(6)
- tmw is Mana World: fantasy online game
- tn5250(1)
- implementation of 5250 telnet protocol
- tn5250rc(5)
- tn5250/lp5250d config file
- tnameserv-java-1.6.0-openjdk(1)
- tnameserv
- tnameserv-java-1.7.0-openjdk(1)
- tnameserv
- tnef(1)
-
- tnftp(1)
- Internet file transfer program
- tntlogin(1)
- Cisco/Foundry login script
- tntrancid(1)
- Cisco config filter
- toascii(3)
- convert char to ASCII
- toast(1)
- GSM 06.10 lossy sound compression
- toc2cddb(1)
- translates TOC file of cdrdao into cddb file/
- toc2cue(1)
- converts TOC files of cdrdao into .cue file
- todo(3)
-
- todologo(1)
- Create operator logo that contains 3 lines of text
- toe(1)
- table of entries
- togeomview(1)
- send commands/OOGL objects to geomview
- togglesebool(8)
- flip current value of SELinux boolean
- tokyocabinet(3)
- modern implementation of DBM
- tolower(3)
- convert letter to upper/lower case
- toolbar(3)
- GUI for Starting Tools/User Contributions
- top(1)
- tasks
- top_panel(3)
- panel stack extension for curses
- top_row(3)
- set/get current_menu_item
- topblock(6)
- 3D world of falling blocks that build up/up
- topless(1)
- command output on whole screen like top
- toplevelshell(3)
- TopLevelShell widget class
- toppler(6)
- clone of old Nebulous game
- tor(1)
- second-generation onion router
- tor-gencert(1)
- make certs/keys for Tor directory authorities
- tor-resolve(1)
- resolve hostname to IP address via tor
- tor_selinux(8)
- Security Enhanced Policy for tor processes
- torify(1)
- wrapper for torsocks/tsocks/tor
- torsocks(1)
- Shell wrapper to simplify use of torsocks library to transparently allow application to use SOCKS proxy. Basically renamed, patched tsocks
- torsocks(8)
- Library for intercepting outgoing network connections/redirecting them through SOCKS server
- torsocks.conf(5)
- config file for torsocks
- torus-2qos(8)
- Routing engine for OpenSM subnet manager
- torus-2qos.conf(5)
- Torus-2QoS config for OpenSM subnet manager
- totem(1)
- GNOME desktop movie player based on GStreamer
- totem-video-thumbnailer(1)
- video thumbnailer for GNOME desktop
- totpprov(5)
- Simple provisioning script for totpcgi
- touch(1)
- change file timestamps
- touchline(3)
- curses refresh control routines
- touchwin(3)
- curses refresh control routines
- toupper(3)
- convert letter to upper/lower case
- towctrans(3)
- wide-char transliteration
- towlower(3)
- convert wide char to lowercase
- towupper(3)
- convert wide char to uppercase
- tp-magic-config(1)
- Helps creating 'Magic' tool plugins for Tux Paint
- tpage(1)
- Process templates from
- tparm(3)
- curses interfaces to terminfo database
- tpb(1)
- use IBM ThinkPad special keys
- tpctl(1)
- ThinkPad config tool for
- tping(1)
- Send echo messages to LAM nodes
- tpipe(1)
- duplicate stdin/standard ouput
- tpm_changeownerauth(8)
- change authorization data associated with owner/SRK
- tpm_clear(8)
- return TPM to default state
- tpm_createek(8)
- create Endorsement Key Pair on TPM
- tpm_getpcrhash(8)
-
- tpm_getpubek(8)
- public portion of TPM's Endorsement Key
- tpm_getquote(8)
-
- tpm_loadkey(8)
-
- tpm_mkaik(8)
-
- tpm_mkuuid(8)
-
- tpm_quote_tools(8)
-
- tpm_resetdalock(8)
- reset dictionary attack lock for user
- tpm_restrictpubek(8)
- restrict ability to display public portion of Endorsement Key to owner
- tpm_revokeek(8)
- revokes Endorsement Key Pair of TPM
- tpm_sealdata(1)
- seal input data to system's TPM
- tpm_selftest(8)
- request TPM perform selftest/report
- tpm_setactive(8)
- change TPM active states
- tpm_setclearable(8)
- disable TPM clear operations
- tpm_setenable(8)
- change TPM enable states
- tpm_setoperatorauth(8)
- sets operator authorization value in TPM
- tpm_setownable(8)
- change whether TPM allows tpm_takeownership operations
- tpm_setpresence(8)
-
- tpm_takeownership(8)
- setup owner on TPM
- tpm_unloadkey(8)
-
- tpm_updatepcrhash(8)
-
- tpm_verifyquote(8)
-
- tpm_version(1)
- report TPM version/manufacturer info
- tpmtoken_import(1)
- import X.509 certficate/RSA key pair into user's TPM PKCS#11 data store
- tpmtoken_init(1)
- initialize user's TPM PKCS#11 data store
- tpmtoken_objects(1)
- objects in user's TPM PKCS#11 data store
- tpmtoken_protect(1)
- encrypt/decrypt data using symmetric key stored in user's TPM PKCS#11 data store
- tpmtoken_setpasswd(1)
- change password associated with user's TPM PKCS#11 data store
- tpmunsealfile(3)
- unseal routines
- tpmunsealshred(3)
- unseal routines
- tpmunsealstrerror(3)
- unseal routines
- tpp(1)
- Text Presentation Program
- tput(1)
- initialize terminal/query terminfo database
- tputs(3)
- curses interfaces to terminfo database
- tr(1)
- translate/delete char
- trac-admin(1)
- Trac administration tool
- tracd(1)
- Stand alone Trac HTTP server
- trace(3)
- Debugging helper macro to trace messages. Allegro game programming library
- trace(8)
- Postfix delivery status reports
- trace-cmd(1)
- interacts with Ftrace kernel internal tracer
- trace-cmd-extract(1)
- extract out data from Ftrace tracer
- trace-cmd-list(1)
- available plugins, events or options for Ftrace
- trace-cmd-listen(1)
- listen for incoming connection to record tracing
- trace-cmd-record(1)
- record trace from Ftrace internal tracer
- trace-cmd-report(1)
- in ASCII trace created by trace-cmd record
- trace-cmd-reset(1)
- turn off all Ftrace tracing to bring back full performance
- trace-cmd-split(1)
- split trace.dat file into smaller files
- trace-cmd-start(1)
- start Ftrace kernel tracer without recording
- trace-cmd-stop(1)
- stop Ftrace kernel tracer from writing to ring buffer
- trace-cmd.dat(5)
- trace-cmd file format
- tracecc(1)
- Debugging preprocessor for C, C++, Objective-C and Java
- tracecmd(3)
- monitor renames/deletes of command
- tracepath(8)
- traces path to network host discovering MTU along this path
- tracepath6(8)
- traces path to network host discovering MTU along this path
- traceproto(8)
- trace route to destination using specified protocol
- traceroute(8)
- print route packets trace to network host
- traceroute6(8)
- print route packets trace to network host
- traceroute_selinux(8)
- Security Enhanced Policy for traceroute processes
- tracert6(8)
- IPv6 traceroute tool
- tracevar(3)
- monitor accesses to variable
- trackballs(6)
-
- trademgen(1)
- Interactive utility for C++ Simulated Travel Demand Generation Library
- trademgen-config(1)
- config Script for C++ Simulated Travel Demand Generation Library
- trademgen-library(3)
- C++ Simulated Travel Demand Generation Library
- trademgen_drawbookingarrivals(1)
- Script plotting booking arrival curves, as generated by C++ Simulated Travel Demand Generation Library
- trademgen_extractbookingrequests(1)
- Script extracting booking requests, as generated by C++ Simulated Travel Demand Generation Library
- trademgen_generatedemand(1)
- utility for C++ Simulated Travel Demand Generation Library
- trademgen_with_db(1)
- Database-enabled C++ Simulated Travel Demand Generation Library
- traffic_shell(1)
- Describes how to use Traffic Shell
- trafshow(1)
- full screen show network traffic
- traits(5)
- Lists traits used by Motif Toolkit
- trampoline(3)
- closures as first-class C functions
- trampoline_r(3)
- closures as first-class C functions
- trana(1)
- Tracecc output analysis helper
- trancid(1)
- Cisco config filter
- transcode(1)
- video stream processing tool
- transcode_export(1)
- export modules collection
- transcode_filter(1)
- filter modules collection
- transcode_import(1)
- transcode import modules collection
- transfig(1)
- creates makefile for portable LaTeX figures
- transientshell(3)
- TransientShell widget class
- translate(1)
- translate text/web page
- translate(3)
- convert file name to native form/replace tilde with home directory
- transmission-cli(1)
- bittorrent client
- transmission-create(1)
- utility to create .torrent files
- transmission-daemon(1)
- bittorrent client
- transmission-edit(1)
- utility to modify .torrent files' announce URLs
- transmission-gtk(1)
- bittorrent client
- transmission-qt(1)
- bittorrent client
- transmission-remote(1)
- remote control utility for transmission-daemon/transmission
- transmission-show(1)
- utility to show .torrent file metadata
- transport(5)
- Postfix transport table format
- transport-address-mib(7)
-
- transpose_font(3)
- Transposes all char in font. Allegro game programming library
- transxx(1)
- Create pseudo translated PO file from PO template file
- trap(1)
- bash built-in commands, see bash
- traptoemail(1)
- convert snmp traps into emails
- travelccm(1)
- Binary executable for C++ Travel Customer Choice Model Library
- travelccm-config(1)
- config Script for C++ Travel Customer Choice Model Library
- travelccm-library(3)
- C++ Travel Customer Choice Model Library
- trcv(2)
- Send/receive LAM transport messages
- trecv(2)
- Send/receive LAM transport messages
- tred(1)
- transitive reduction filter for directed graphs
- tree(1)
- contents of directories in tree-like format
- treereg(1)
- Compiler for Tree regex
- trend1d(1)
- Fit [weighted] [robust] polynomial [or Fourier] model for y = f to xy[w] data
- trend2d(1)
- Fit [weighted] [robust] polynomial model for z = f to xyz[w] data
- trial(1)
- run unit tests
- triangle(1)
- random mountains using iterative subdivision of triangles
- triangle(3)
- Draws filled triangle. Allegro game programming library
- triangle(6)
- random mountains using iterative subdivision of triangles
- triangle3d(3)
- Draws 3d triangle onto specified bitmap. Allegro game programming library
- triangle3d_f(3)
- Draws 3d triangle onto specified bitmap. Allegro game programming library
- triangulate(1)
- Perform optimal Delaunay triangulation/gridding of Cartesian data [method]
- trickle(1)
- lightweight userspace bandwidth shaper
- trickled(8)
- userspace bandwidth manager daemon
- trickled.conf(5)
- format of config file used by trickled
- trident(4)
- Trident video driver
- tripplite(8)
- Driver for Tripp-Lite SmartPro UPS equipment
- tripplite_usb(8)
- Driver for older Tripp Lite USB UPSes
- tripplitesu(8)
- Driver for Tripp-Lite SmartOnline UPS equipment
- tripwire(8)
- file integrity checker for UNIX systems
- trivial-rewrite(8)
- Postfix address rewriting/resolving daemon
- troff(1)
- troff processor of groff text formatting system
- trror(2)
- Print LAM system error message
- truchet(1)
- draws curved/angular Truchet patterns
- truchet(6)
- draws curved/angular Truchet patterns
- true(1)
- do nothing, successfully
- trueprint(1)
- print program listings on postscript printer
- trunc(3)
- round to integer, toward zero
- truncate(1)
- shrink/extend size of file to specified size
- truncate(2)
- truncate file to specified length
- truncate(3)
- truncate file to specified length
- truncate(7)
- empty table/set of tables
- truncate64(2)
- truncate file to specified length
- truncf(3)
- round to integer, toward zero
- truncl(3)
- round to integer, toward zero
- trustman(1)
- Manage keys used as trust anchors
- try-from(8)
- test program for tcp_wrapper
- ts(1)
- timestamp input
- ts-disable(1)
- Disable privileged commands
- ts-enable(1)
- Enable privileged commands
- ts-exit(1)
- Type exit to end your CLI session
- ts2po(1)
- convert Qt Linguist files to Gettext PO localization files
- tsa2d32(1)
- gcin's Tsin tools
- tsclient(1)
-
- tsearch(3)
- manage binary tree
- tsend(2)
- Send/receive LAM transport messages
- tseng(4)
- Tseng Labs video driver
- tset(1)
- terminal initialization
- tsget(1)
- Time Stamping HTTP/HTTPS client
- tshark(1)
- Dump/analyze network traffic
- tsi(5)
- Transmission Subscriber Identification access control list
- tsitest(8)
- Hyla FAX TSI access control list checking program
- tslearn(1)
- learns user's personal phrase data
- tsnd(2)
- Send/receive LAM transport messages
- tsocks(1)
- Shell wrapper to simplify use of tsocks library to transparently allow application to use SOCKS proxy
- tsocks(8)
- Library for intercepting outgoing network connections/redirecting them through SOCKS server
- tsocks.conf(5)
- config file for tsocks
- tsort(1)
- perform topological sort
- tsphere(1)
-
- tspi_changeauth(3)
- change authorization data of entity
- tspi_changeauthasym(3)
- change authorization data of entity using asymmetric change protocol
- tspi_context_close(3)
- destroy TSP context handle
- tspi_context_closeobject(3)
- destroy resources associated with object handle
- tspi_context_connect(3)
-
- tspi_context_create(3)
- create TSP context handle
- tspi_context_createobject(3)
- create empty object/return handle to that object
- tspi_context_freememory(3)
- Free allocated memory for given context
- tspi_context_getcapability(3)
- provide capabilites of TSS Core Service, TSS Service Provider, or TPM
- tspi_context_getdefaultpolicy(3)
- handle to default policy object of given context
- tspi_context_getkeybypublicinfo(3)
- search persistent storage for registered key using provided public key info
- tspi_context_getkeybyuuid(3)
- handle to key registered in persistent storage
- tspi_context_getregisteredkeysbyuuid(3)
- array of TSS_KM_KEYINFO structures based on state of persistent storage
- tspi_context_getregisteredkeysbyuuid2(3)
- array of TSS_KM_KEYINFO2 structures based on state of persistent storage
- tspi_context_gettpmobject(3)
- handle of TPM object associated with context
- tspi_context_loadkeybyblob(3)
- load key into TPM using key's blob
- tspi_context_loadkeybyuuid(3)
- load key that's been registered in persistent storage
- tspi_context_registerkey(3)
- register key in TSS Persistent Storage database
- tspi_context_unregisterkey(3)
- unregister key from persistent storage device
- tspi_daa_issuecredential(3)
- issue DAA credential for TCG platform
- tspi_daa_issueinit(3)
- initialize Issuer for join operation
- tspi_daa_issuerkeyverification(3)
- verifies DAA public key
- tspi_daa_issuesetup(3)
- make DAA Issuer public/private key
- tspi_daa_verifyinit(3)
- creates challenge for TCG platform
- tspi_daa_verifysignature(3)
- creates challenge for TCG platform
- tspi_data_bind(3)
- Encrypts data blob
- tspi_data_seal(3)
- encrypt data blob in mannar that is only decryptable by Tspi_Data_Unseal on same system
- tspi_data_unbind(3)
- Decrypts data bound to key
- tspi_data_unseal(3)
- dencrypt data encrypted by Tspi_Data_Seal() only if it was encrypted on same platform/under current config
- tspi_decodeber_tssblob(3)
- unwraps BER-encoded TSS blob
- tspi_encodeder_tssblob(3)
- make DER encoded TSS blob
- tspi_getattribdata(3)
- non 32bit attrib of object
- tspi_getattribuint32(3)
- value of particular attrib associated with given class/object
- tspi_getpolicyobject(3)
- policy object assigned to working object
- tspi_hash_gethashvalue(3)
- current hash value of hash object
- tspi_hash_sethashvalue(3)
- Sets hash value of hash object for non-SHA1 hash objects
- tspi_hash_sign(3)
- sign hash data of object with signing key
- tspi_hash_updatehashvalue(3)
- update hash value of hash object
- tspi_hash_verifysignature(3)
- verify hash value with given signature
- tspi_key_certifykey(3)
- sign public key
- tspi_key_convertmigrationblob(3)
- create wrapped key from migration blob
- tspi_key_createkey(3)
- create key pair within TPM, wrapping it with key addressed by hWrappingKey
- tspi_key_createmigrationblob(3)
- create key blob suitable for migrating to another TPM
- tspi_key_getpubkey(3)
- public key of object
- tspi_key_loadkey(3)
- load key into TPM
- tspi_key_unloadkey(3)
- unload key from TPM
- tspi_key_wrapkey(3)
- wrap key with key addressed by hWrappingKey
- tspi_pcrcomposite_getpcrvalue(3)
- digest value of given PCR index inside PCR composite object
- tspi_pcrcomposite_selectpcrindex(3)
-
- tspi_pcrcomposite_setpcrvalue(3)
-
- tspi_policy_assigntoobject(3)
- assign policy to object
- tspi_policy_flushsecret(3)
- flush cached secret
- tspi_policy_setsecret(3)
- set authorization data of policy object/define handling of its retrieval
- tspi_setattribdata(3)
- set non 32bit attrib of object
- tspi_setattribuint32(3)
- set 32bit attrib associated with given class/object
- tspi_tpm_authorizemigrationticket(3)
-
- tspi_tpm_certifyselftest(3)
-
- tspi_tpm_checkmaintenancepubkey(3)
-
- tspi_tpm_clearowner(3)
- clear TPM ownership
- tspi_tpm_cmksetrestrictions(3)
- set restrictions on use of delegated Certified Migratable Keys
- tspi_tpm_collateidentityrequest(3)
- Gets all informatin necessary to send to trusted third party , repartory to asking TTP to create certificate for identity
- tspi_tpm_createendorsementkey(3)
- create endorsement key
- tspi_tpm_createmaintenancearchive(3)
- create TPM manufacturer specific maintenance archive data
- tspi_tpm_daa_joincreatedaapubkey(3)
- computes credential request for DAA Issuer
- tspi_tpm_daa_joininit(3)
- start DAA Join process
- tspi_tpm_daa_joinstorecredential(3)
- compute final DAA Credential
- tspi_tpm_daa_sign(3)
- creates DAA Signature that proofs ownership of DAA Credential
- tspi_tpm_dirread(3)
- Read Data Integrity Register
- tspi_tpm_dirwrite(3)
- to Data Integrity Register
- tspi_tpm_getauditdigest(3)
- audit digest
- tspi_tpm_getcapability(3)
- info on capabilities of TPM
- tspi_tpm_getevent(3)
-
- tspi_tpm_geteventlog(3)
-
- tspi_tpm_getevents(3)
-
- tspi_tpm_getpubendorsementkey(3)
- create TSS key object from TPM's public endorsement key
- tspi_tpm_getrandom(3)
- make random number on TPM
- tspi_tpm_getstatus(3)
- query TPM's status
- tspi_tpm_gettestresult(3)
-
- tspi_tpm_killmaintenancefeature(3)
- Disables ability to create maintenance archive
- tspi_tpm_loadmaintenancepubkey(3)
-
- tspi_tpm_ownergetsrkpubkey(3)
- public key of SRK
- tspi_tpm_pcrextend(3)
- extend PCR register/write PCR event log
- tspi_tpm_pcrread(3)
- read value in PCR register
- tspi_tpm_quote(3)
- retreive signed set of PCR values
- tspi_tpm_selftestfull(3)
- perform self-test of each internal TPM function
- tspi_tpm_setstatus(3)
- modify TPM's status
- tspi_tpm_stirrandom(3)
- add entropy to TPM random number generator
- tspi_tpm_takeownership(3)
- take ownership of TPM
- tsql(1)
- utility to test FreeTDS connections/queries
- tst(3)
- ternary search trie functions
- tstdio(3)
- flexible LAM standard I/O package
- tstiee(l)
- called from LAPACK routines to choose problem-dependent parameters for local environment
- tstmachines(1)
- Tests availability of remote machines for runing MPI programs
- ttb(3)
- base for building trace tools for distributed systems
- ttcp(1)
- test TCP/UDP performance
- ttf2afm(1)
- utility to make AFM files for TrueType fonts
- ttf2pt1(1)
- True Type to PostScript Type 1 Font Converter
- ttf2pt1_convert(1)
- convenience font conversion script
- ttf2pt1_x2gs(1)
- font installer for Ghostscript
- ttfwrapper(1)
- wraps True Type font into PostScript Type42 format
- ttime(3)
- LAM timer value in seconds
- ttk_addpadding(3)
- Tk themed geometry utilities
- ttk_boxcontains(3)
- Tk themed geometry utilities
- ttk_createtheme(3)
- create/use Tk themes
- ttk_expandbox(3)
- Tk themed geometry utilities
- ttk_getborderfromobj(3)
- Tk themed geometry utilities
- ttk_getcurrenttheme(3)
- create/use Tk themes
- ttk_getdefaulttheme(3)
- create/use Tk themes
- ttk_getpaddingfromobj(3)
- Tk themed geometry utilities
- ttk_getstickyfromobj(3)
- Tk themed geometry utilities
- ttk_gettheme(3)
- create/use Tk themes
- ttk_makebox(3)
- Tk themed geometry utilities
- ttk_makepadding(3)
- Tk themed geometry utilities
- ttk_packbox(3)
- Tk themed geometry utilities
- ttk_padbox(3)
- Tk themed geometry utilities
- ttk_placebox(3)
- Tk themed geometry utilities
- ttk_relievepadding(3)
- Tk themed geometry utilities
- ttk_stickbox(3)
- Tk themed geometry utilities
- ttk_uniformpadding(3)
- Tk themed geometry utilities
- ttol(3)
- LAM data representation translation suite
- ttree(1)
- Process entire directory trees of templates
- ttv(1)
- TV/video on tty
- ttx(1)
- tool for manipulating TrueType/OpenType fonts
- tty(1)
- print file name of terminal connected to stdin
- tty(4)
- controlling terminal
- tty_ioctl(4)
- ioctls for terminals/serial lines
- ttyi(4)
- ISDN char devices with modem emulator
- ttyname(3)
- return name of terminal
- ttyname_r(3)
- return name of terminal
- ttys(4)
- serial terminal lines
- ttyslot(3)
- find slot of current user's terminal in some file
- ttysnoop(8)
- snoop on user's tty
- ttytype(5)
- terminal device to default terminal type mapping
- ttywatch(8)
- log output of arbitrarily many tty devices
- tudu(1)
- manage TODO lists hierarchically
- tunctl(8)
- create/manage persistent TUN/TAP interfaces
- tune2fs(8)
- adjust tunable filesystem parameters on ext2/ext3/ext4 filesystems
- tune4fs(8)
- adjust tunable filesystem parameters on ext2/ext3/ext4 filesystems
- tuned(8)
- dynamic adaptive system tuning daemon
- tuned-adm(1)
- commandline tool for switching between different tuning profiles
- tuned.conf(5)
- config file for tuned
- tuned_selinux(8)
- Security Enhanced Policy for tuned processes
- tunefs.reiserfs(8)
- reiserfs filesystem tuning program
- tunegfs2(8)
- View/change gfs2 superblocks
- tunelp(8)
- set various parameters for lp device
- tux(2)
- interact with TUX kernel subsystem
- tuxcall(2)
- unimplemented system calls
- tuxpaint(1)
- Tux Paint, drawing program for young children
- tuxpaint-import(1)
- Import image files into Tux Paint
- tv(3)
- TV graphically examines ETS/Mnesia tables
- tvtime(1)
- high quality television application
- tvtime-command(1)
- control running tvtime process
- tvtime-configure(1)
- change settings in tvtime config
- tvtime-scanner(1)
- all-band scanner for tvtime to help users of European cable providers that do not use standard frequencies
- tvtime.xml(5)
- tvtime config file
- tvtime_selinux(8)
- Security Enhanced Policy for tvtime processes
- twadmin(8)
- Tripwire administrative/utility tool
- twalk(3)
- manage binary tree
- twang(1)
- pluck pieces of screen
- twang(6)
- pluck pieces of screen
- twconfig(4)
- Tripwire config file reference
- tweak(1)
- efficient hex editor
- twfiles(5)
- overview of files used by Tripwire/file backup process
- twhich(1)
- locates file listing in transcripts
- twin(1)
- Textmode WINdow environment
- twintro(8)
- introduction to Tripwire software
- twinwave(1)
- Wraps multiple GTKWave sessions in one window
- twistd(1)
- run Twisted applications
- twm(1)
- Tab Window Manager for X Window System
- twolame(1)
- optimised MPEG Audio Layer 2 encoder
- twopi(1)
- filter for drawing directed graphs
- twpolicy(4)
- Tripwire policy file reference
- twprint(8)
- Tripwire database/report printer
- txt2man(1)
- convert flat ASCII text to man page format
- txt2po(1)
- convert plain text files to Gettext PO localization files
- txt2regex(1)
- regex Wizard, written with bash2 builtins
- txt2tags(1)
- text formatting/conversion tool
- type(1)
- bash built-in commands, see bash
- type1afm(1)
- create font metrics file from Type 1 font file
- typeahead(3)
- curses input options
- typerules(5)
- Hyla FAX file type identification/conversion rules
- types.db(5)
- Data-set specifications for system statistics collection daemon collectd
- typeset(1)
- bash built-in commands, see bash
- typeset_audio_dir(1)
- produce TeX listing of directories with audio files
- typespeed(6)
- Test your typing speed/get your fingers' CPS
- typetest(8)
- Program for testing out typerules
- tyrion(8)
- Tyrion service daemon
- tz_convert(1)
- Timezone converter from operating system tz format into libical format used by Orage/several other calander tools
- tzdata_selinux(8)
- Security Enhanced Policy for tzdata processes
- tzfile(5)
- timezone info
- tzname(3)
- initialize time conversion info
- tzselect(8)
- select timezone
- tzset(3)
- initialize time conversion info