tvtime-configure(1) - Linux man page

Name

file

Synopsis

tvtime-configure [ OPTION ] ...

Description

tvtime-configure allows a user to set configuration settings for tvtime without starting the application. This is useful for installation programs such as debconf to let them configure tvtime without having to write a parser for the configuration file. The command line options are a subset of those for tvtime itself.

Options

-a, --widescreen

This option starts tvtime in 16:9 aspect ratio mode.

-A, --nowidescreen

This option starts tvtime in 4:3 aspect ratio mode.

-h, --help

Show usage information.

-m, --fullscreen

Start tvtime in fullscreen mode.

-M, --window

Start tvtime in windowed mode.

-p, --fspos=POS

Set the fullscreen window position. Use this if you have a projector to help tvtime fit properly onto your screen.

·	top
·	bottom
·	centre (default)

-F, --configfile=FILE

Additional config file to load settings from.

-H, --height=HEIGHT

Sets the height of the output window to start up at in scanlines. The default output window size is 576 scanlines.

-I, --inputwidth=SAMPLING

V4L input scanline sampling (defaults to 720. This sets how many pixels per scanline to request from the capture card. A higher setting gives better quality, while a lower setting means we do less work, and so tvtime will run faster. If you have a slower CPU (like, less than 500Mhz or so), maybe values of 480 or 400 might suit you best. For best quality, choose a high value like 720 or 768. Many capture cards cannot sample higher than 768 pixels per scanline.

-d, --device=NAME

video4linux device to use (defaults to /dev/video0).

-b, --vbidevice=DEVICE

VBI device to use (defaults to /dev/vbi0).

-i, --input=INPUTNUM

video4linux input number (defaults to 0). Cards commonly have a bunch of sources, for example, on my WinTV card, source 0 is my tuner and source 1 is the composite input.

-c, --channel=CHANNEL

On startup, tvtime will tune to the given channel. Otherwise, the channels from the config file will be used.

-n, --norm=NORM

The mode to set the tuner to (defaults to NTSC). Valid modes are:

·	NTSC
·	PAL
·	SECAM
·	PAL-NC
·	PAL-M
·	PAL-N
·	NTSC-JP

-f, --frequencies=NAME

The channels you are receiving with the tuner (defaults to us-cable). Valid values are:

·	us-cable
·	us-broadcast
·	japan-cable
·	japan-broadcast
·	europe
·	australia
·	australia-optus
·	newzealand
·	france
·	russia

-R, --priority=PRI

Sets the process priority (see nice(1)) that tvtime should be run at.

-t, --xmltv=FILE

Reads XMLTV listings from the given file to display on the OSD. Channels are looked up based on their name, and tvtime will display the show title, sub-title and show description on the OSD.

-l, --xmltvlanguage=LANG

Use XMLTV data in given language, if available. Languages are represented by their two-letter language code (for example, "de" for German). The default language used in the file will be used if this is unset or set to "none"

-x, --mixer=DEVICE[:CH]

The mixer device and channel for the volume controls. (defaults to /dev/mixer:line). Valid channels are:

·	vol
·	bass
·	treble
·	synth
·	pcm
·	speaker
·	line
·	mic
·	cd
·	mix
·	pcm2
·	rec
·	igain
·	ogain
·	line1
·	line2
·	line3
·	dig1
·	dig2
·	dig3
·	phin
·	phout
·	video
·	radio
·	monitor

Authors

Billy Biggs.

See Also

tvtime(1), tvtime.xml(5),

Referenced By