Linux man pages: P
- p0f(1)
- identify remote systems passively
- p2bin(1)
- convert code files into hex files
- p2hex(1)
- convert code files into hex files
- p5nci(3)
- Perl extension for loading shared libraries/their functions
- p_ac_status(3)
- manage validator context
- p_val_status(3)
- manage validator context
- pabrowse(1)
- PulseAudio sound servers on network
- pacat(1)
- Play back/record raw/encoded audio streams on PulseAudio sound server
- pacemaker_selinux(8)
- Security Enhanced Policy for pacemaker processes
- pacemakerd(8)
- Part of Pacemaker cluster resource manager
- pack(3)
- support for connected components
- pack200-java-1.6.0-openjdk(1)
- JAR Packing tool
- pack200-java-1.7.0-openjdk(1)
- JAR Packing tool
- pack_cis(8)
- compile PCMCIA Card info Structures
- pack_fclose(3)
- Closes stream previously opened. Allegro game programming library
- pack_fclose_chunk(3)
- Closes previously opened sub-chunk. Allegro game programming library
- pack_feof(3)
- Returns nonzero as soon as you reach end of file. Allegro game programming library
- pack_ferror(3)
- Tells if error occurred during operation on stream. Allegro game programming library
- pack_fgets(3)
- Reads line from stream. Allegro game programming library
- pack_fopen(3)
- Opens file according to mode. Allegro game programming library
- pack_fopen_chunk(3)
- Opens sub-chunk of file. Allegro game programming library
- pack_fopen_vtable(3)
- Allegro game programming library
- pack_fputs(3)
- Writes string to stream. Allegro game programming library
- pack_fread(3)
- Reads n bytes from stream. Allegro game programming library
- pack_fseek(3)
- Seeks inside stream. Allegro game programming library
- pack_fwrite(3)
- Writes n bytes to stream. Allegro game programming library
- pack_getc(3)
- Returns next char from stream. Allegro game programming library
- pack_igetl(3)
- Like pack_getc(), but using 32-bit Intel byte ordering words. Allegro game programming library
- pack_igetw(3)
- Like pack_getc(), but using 16-bit Intel byte ordering words. Allegro game programming library
- pack_iputl(3)
- Like pack_putc(), but using 32-bit Intel byte ordering words. Allegro game programming library
- pack_iputw(3)
- Like pack_putc(), but using 16-bit Intel byte ordering words. Allegro game programming library
- pack_isam(1)
- make compressed, read-only MyISAM tables
- pack_mgetl(3)
- Like pack_getc(), but using 32-bit Motorola byte ordering words. Allegro game programming library
- pack_mgetw(3)
- Like pack_getc(), but using 16-bit Motorola byte ordering words. Allegro game programming library
- pack_mputl(3)
- Like pack_putc(), but using 32-bit Motorola byte ordering words. Allegro game programming library
- pack_mputw(3)
- Like pack_putc(), but using 16-bit Motorola byte ordering words. Allegro game programming library
- pack_putc(3)
- Puts char in stream. Allegro game programming library
- package-cleanup(1)
-
- packages(3)
- Packages in Erlang
- packages.pl(1)
-
- packer(1)
- package generating tool
- packet(7)
- packet interface on device level
- packetforge-ng(1)
- forge packets: ARP, UDP, ICMP or custom
- packfile(3)
- Packfile structure, similar to libc FILE structure. Allegro game programming library
- packfile_password(3)
- Sets global I/O encryption password. Allegro game programming library
- packfile_vtable(3)
- Packfile vtable structure, for custom packfiles. Allegro game programming library
- packit(8)
- Packet analysis/injection tool
- pacman(1)
- simulates game of Pac-Man on randomly-created level
- pacman(6)
- simulates game of Pac-Man on randomly-created level
- pacmd(1)
- Reconfigure PulseAudio sound server during runtime
- paco(8)
- source code package organizer
- pacoball(8)
- Binary package support for paco
- pacorc(5)
- config file for paco
- pactl(1)
- Control running PulseAudio sound server
- pads_selinux(8)
- Security Enhanced Policy for pads processes
- padsp(1)
- PulseAudio OSS Wrapper
- padwalker(3)
- play with other peoples' lexical variables
- pagermap(5)
- SNPP pager identifier mapping file
- pagesend(8)
- Hyla FAX IXO/TAP/UCP transmit program
- pagesize(1)
- Print supported system page sizes
- pagesizes(5)
- Hyla FAX page size definitions
- pagsh(1)
- execute command without authentication
- pahole(1)
- Shows/manipulates data structure layout
- pair_content(3)
- curses color change routines
- pair_number(3)
- curses char/window attrib control routines
- pal2rgb(1)
- convert palette color TIFF image to full color image
- pal_size(3)
- Number of entries in palette. Allegro game programming library
- palette(3)
- Stores palette info. Allegro game programming library
- palette_color(3)
- Maps palette indexes into current pixel format colors. Allegro game programming library
- palmax(4)
- Palmax touchscreen driver
- palmtopnm(1)
- convert Palm Bitmap to PNM image
- pam(3)
- Pluggable Authentication Modules Library
- pam(5)
- Netpbm common 2-dimensional bitmap format
- pam(8)
- Pluggable Authentication Modules for
- pam-panel-icon(1)
- notification area indicator of pam_timestamp status
- pam.conf(5)
- PAM config files
- pam.conf(8)
- Pluggable Authentication Modules for
- pam.d(5)
- PAM config files
- pam.d(8)
- Pluggable Authentication Modules for
- pam_abl(1)
- query/purge databases used by pam_abl module
- pam_access(8)
- PAM module for logdaemon style login access control
- pam_acct_mgmt(3)
- PAM account validation management
- pam_afs_session(5)
- AFS PAG/token PAM module
- pam_auth(8)
- Squid PAM authentication helper
- pam_authenticate(3)
- account authentication
- pam_chauthtok(3)
- updating authentication tokens
- pam_ck_connector(8)
- Register session with ConsoleKit
- pam_close_session(3)
- terminate PAM session management
- pam_console(8)
- determine user owning system console
- pam_console_apply(8)
- set/revoke permissions for users at system console
- pam_console_selinux(8)
- Security Enhanced Policy for pam_console processes
- pam_conv(3)
- PAM conversation function
- pam_cracklib(8)
- PAM module to check password against dictionary words
- pam_debug(8)
- PAM module to debug PAM stack
- pam_deny(8)
- locking-out PAM module
- pam_echo(8)
- PAM module for printing text messages
- pam_ecryptfs(8)
- PAM module for eCryptfs
- pam_end(3)
- termination of PAM transaction
- pam_env(8)
- PAM module to set/unset environment variables
- pam_env.conf(5)
- environment variables config file
- pam_error(3)
- error messages to user
- pam_exec(8)
- PAM module which calls external command
- pam_fail_delay(3)
- request delay on failure
- pam_faildelay(8)
- Change delay on failure per-application
- pam_faillock(8)
- Module counting authentication failures during specified interval
- pam_filter(8)
- PAM filter module
- pam_ftp(8)
- PAM module for anonymous access module
- pam_get_authtok(3)
- authentication token
- pam_get_authtok_noverify(3)
- authentication token
- pam_get_authtok_verify(3)
- authentication token
- pam_get_data(3)
- module internal data
- pam_get_item(3)
- getting PAM informations
- pam_get_user(3)
- user name
- pam_getenv(3)
- PAM environment variable
- pam_getenvlist(3)
- getting PAM environment
- pam_group(8)
- PAM module for group access
- pam_info(3)
- messages to user
- pam_issue(8)
- PAM module to add issue file to user prompt
- pam_keyinit(8)
- Kernel session keyring initialiser module
- pam_keyring(8)
- PAM module that execute gnome-keyring-daemon/unlock default keyring
- pam_krb5(5)
- Kerberos 5 authentication
- pam_krb5(8)
- Kerberos 5 authentication
- pam_krb5_storetmp(8)
- Temporary file helper
- pam_lastlog(8)
- PAM module to display date of last login/perform inactive account lock out
- pam_ldap(5)
- LDAP pluggable authentication module
- pam_limits(8)
- PAM module to limit resources
- pam_listfile(8)
- deny/allow services based on arbitrary file
- pam_localuser(8)
- require users to be listed in /etc/passwd
- pam_loginuid(8)
- Record user's login uid to process attrib
- pam_mail(8)
- Inform about available mail
- pam_mapi(8)
- Module for authentication via MAPI against Zarafa server
- pam_misc_drop_env(3)
- liberating locally saved environment
- pam_misc_paste_env(3)
- transcribing environment to that of PAM
- pam_misc_setenv(3)
- BSD like PAM environment variable setting
- pam_mkhomedir(8)
- PAM module to create users home directory
- pam_motd(8)
- motd file
- pam_namespace(8)
- PAM module for configuring namespace for session
- pam_nologin(8)
- Prevent non-root users from login
- pam_oddjob_mkhomedir(8)
-
- pam_open_session(3)
- start PAM session management
- pam_passwdqc(8)
- Password quality-control PAM module
- pam_permit(8)
- promiscuous module
- pam_pkcs11(8)
- PAM Authentication Module for PKCS#11 token libraries
- pam_postgresok(8)
- simple check of real UID/corresponding account
- pam_prompt(3)
- interface to conversation function
- pam_putenv(3)
- set/change PAM environment variable
- pam_pwhistory(8)
- PAM module to remember last passwords
- pam_pwquality(8)
- PAM module to perform password quality checking
- pam_rhosts(8)
- rhosts PAM module
- pam_rootok(8)
- Gain only root access
- pam_rps(8)
- challenge-response authentication
- pam_script(5)
-
- pam_securetty(8)
- Limit root login to special devices
- pam_selinux(8)
- PAM module to set default security context
- pam_selinux_check(8)
- test pam_selinux_check
- pam_sepermit(8)
- PAM module to allow/deny login depending on SELinux enforcement state
- pam_set_data(3)
- set module internal data
- pam_set_item(3)
- set/update PAM informations
- pam_setcred(3)
- establish/delete user credentials
- pam_shells(8)
- PAM module to check for valid login shell
- pam_sm_acct_mgmt(3)
- PAM service function for account management
- pam_sm_authenticate(3)
- PAM service function for user authentication
- pam_sm_chauthtok(3)
- PAM service function for authentication token management
- pam_sm_close_session(3)
- PAM service function to terminate session management
- pam_sm_open_session(3)
- PAM service function to start session management
- pam_sm_setcred(3)
- PAM service function to alter credentials
- pam_ssh(8)
- authentication/session management with SSH private keys
- pam_ssh_agent_auth(8)
-
- pam_sss(8)
- PAM module for SSSD
- pam_stack(8)
- recurse into other PAM stacks
- pam_start(3)
- initialization of PAM transaction
- pam_strerror(3)
- return string describing PAM error code
- pam_succeed_if(8)
- test account characteristics
- pam_syslog(3)
- send messages to system logger
- pam_tally(8)
- login counter module
- pam_tally2(8)
- login counter module
- pam_thinkfinger(8)
- PAM module for fingerprint authentication through libthinkfinger
- pam_time(8)
- PAM module for time control access
- pam_timestamp(8)
- Authenticate using cached successful authentication attempts
- pam_timestamp_check(8)
- Check to see if default timestamp is valid
- pam_tty_audit(8)
- Enable/disable TTY auditing for specified users
- pam_umask(8)
- PAM module to set file mode creation mask
- pam_unix(8)
- Module for traditional password authentication
- pam_userdb(8)
- PAM module to authenticate against db database
- pam_verror(3)
- error messages to user
- pam_vinfo(3)
- messages to user
- pam_vprompt(3)
- interface to conversation function
- pam_vsyslog(3)
- send messages to system logger
- pam_warn(8)
- PAM module which logs all PAM items if called
- pam_wheel(8)
- Only permit root access to members of group wheel
- pam_winbind(7)
- PAM module for Winbind
- pam_winbind(8)
- PAM module for Winbind
- pam_winbind.conf(5)
- config file of PAM module for Winbind
- pam_xauth(8)
- PAM module to forward xauth keys between users
- pam_xauth_data(3)
- structure containing X authentication data
- pamaddnoise(1)
- add noise to Netpbm image
- pamarith(1)
- perform arithmetic on two Netpbm images
- pambackground(1)
- create mask of background area of image
- pambayer(1)
- interpret Bayer patterns
- pamchannel(1)
- extract channels from PAM image
- pamcomp(1)
- composite two Netpbm images together
- pamcut(1)
- cut rectangle out of PAM, PBM, PGM, or PPM image
- pamdeinterlace(1)
- remove every other row from PAM/PNM image
- pamdepth(1)
- change maxval in Netpbm image
- pamdice(1)
- slice Netpbm image into many horizontally/vertically
- pamditherbw(1)
- dither grayscale image to black/white
- pamedge(1)
- edge-detect image
- pamendian(1)
- reverse endianness of Netpbm image
- pamenlarge(1)
- Enlarge Netpbm image N times
- pamfile(1)
- describe Netpbm file
- pamfixtrunc(1)
- repair Netpbm image whose file is truncated
- pamflip(1)
- flip/rotate PAM/PNM image
- pamfunc(1)
- Apply simple monadic arithmetic function to Netpbm image
- pamgauss(1)
- create two dimensional gaussian function as PAM image
- pamgradient(1)
- create four-corner gradient PAM/PNM image
- pamlookup(1)
- map image to new image by using it as indices into table
- pammasksharpen(1)
- Sharpen image via unsharp mask
- pammixinterlace(1)
- mix adjacent lines to merge interlaced images
- pamoil(1)
- turn PAM image into oil painting
- pamperspective(1)
- reverse scanline renderer for Netpbm images
- pampick(1)
- pick images out of multi-image Netpbm image stream
- pampop9(1)
- simulate multi-lens camera such as Pop9
- pamrgbatopng(1)
- convert PAM color/transparency image to PNG
- pamscale(1)
- scale Netpbm image
- pamseq(1)
- make PAM image of all possible tuple values, in sequence
- pamsharpmap(1)
- create map of sharpness in PNM/PAM image
- pamsharpness(1)
- measure sharpness of PNM/PAM image
- pamsistoaglyph(1)
- convert single-image stereogram to red/cyan anaglyphic image
- pamslice(1)
- extract one line of values out of Netpbm image
- pamsplit(1)
- split multi-image PNM/PAM file into single-image files
- pamstack(1)
- stack planes of multiple PAM images into one PAM image
- pamstereogram(1)
- create single-image stereogram from PAM height map
- pamstretch(1)
- scale up PNM/PAM image by interpolating between pixels
- pamstretch-gen(1)
- use pamstretch/pamscale to scale by non-integer values
- pamsumm(1)
- Summarize samples in Netpbm image arithmetically
- pamsummcol(1)
- summarize Netpbm image by column
- pamtester(1)
- test pluggable authentication module facility
- pamthreshold(1)
- threshold grayscale image to black/white
- pamtilt(1)
- print tilt angle of PGM file
- pamtodjvurle(1)
- convert Netpbm image to DjVu Color RLE format
- pamtofits(1)
- convert Netpbm image into FITS format
- pamtogif(1)
- convert Netpbm image to GIF image
- pamtohdiff(1)
- convert PAM image to horizontal diff image
- pamtohtmltbl(1)
- convert pnm/pam visual image to HTML table
- pamtojpeg2k(1)
- convert PAM/PNM image to JPEG-2000 code stream
- pamtompfont(1)
- Convert Netpbm image to Mplayer bitmap font file
- pamtooctaveimg(1)
- convert Netpbm image to GNU Octave image
- pamtopam(1)
- copy PAM image
- pamtopfm(1)
- Convert Netpbm image to PFM
- pamtopnm(1)
- convert PAM image to PBM, PGM, or PPM
- pamtosvg(1)
- convert Netpbm image to SVG image
- pamtotga(1)
- convert Netpbm image to TrueVision Targa file
- pamtotiff(1)
- convert Netpbm image to TIFF file
- pamtouil(1)
- convert PNM/PNM/alpha image into Motif UIL icon file
- pamtoxvmini(1)
- convert Netpbm image to XV 'thumbnail' picture
- pamundice(1)
- combine grid of images into one
- pamx(1)
- Netpbm image in X Window System window
- pand(1)
- BlueZ Bluetooth PAN daemon
- pandoc(1)
- general markup converter
- pandoc_markdown(5)
- markdown syntax for pandoc
- panel(3)
- panel stack extension for curses
- panel_above(3)
- panel stack extension for curses
- panel_below(3)
- panel stack extension for curses
- panel_hidden(3)
- panel stack extension for curses
- panel_userptr(3)
- panel stack extension for curses
- panel_window(3)
- panel stack extension for curses
- panelctl(1)
- manual page for panelctl 0.1
- pango(3)
- Layout/render international text
- pango-querymodules(1)
- Module registration utility
- pango-view(1)
- Pango text viewer
- panic(3)
- report fatal error/abort
- panicva(3)
- report fatal error/abort
- paperconf(1)
- print paper config informations
- paperconfig(8)
- configure system default paper size
- paperdone(3)
- begin/end using paper library
- paperfirst(3)
- return informations about paper
- paperinfo(3)
- return informations about paper
- paperinit(3)
- begin/end using paper library
- paperlast(3)
- return informations about paper
- papernext(3)
- return informations about paper
- paperprev(3)
- return informations about paper
- paperpsheight(3)
- return informations about paper
- paperpsname(3)
- return informations about paper
- paperpswidth(3)
- return informations about paper
- papersize(5)
- specify preferred paper size
- paperwithsize(3)
- return informations about paper
- papi(3)
- Performance Application Programming Interface
- papi_accum(3)
- read hardware counters from event set
- papi_accum_counters(3)
- PAPI High Level: read/reset counters
- papi_add_event(3)
- add PAPI preset/native hardware event to event set
- papi_add_events(3)
- add PAPI presets/native hardware events to event set
- papi_assign_eventset_component(3)
- assign component index to existing but empty EventSet
- papi_attach(3)
-
- papi_avail(1)
- provides availability/detail info for PAPI preset events
- papi_cleanup_eventset(3)
- empty/destroy
- papi_clockres(1)
- measures/reports clock latency/resolution for PAPI timers
- papi_command_line(1)
- executes PAPI preset/native events from
- papi_cost(1)
- computes execution time costs for basic PAPI operations
- papi_create_eventset(3)
- create EventSet
- papi_decode(1)
- provides availability/detail info for PAPI preset events
- papi_destroy_eventset(3)
- empty/destroy
- papi_detach(3)
-
- papi_encode_events(3)
- read event definitions from file/modify existing PAPI preset table
- papi_enum_event(3)
-
- papi_event_chooser(1)
- given list of named events, lists other events that can be counted with them
- papi_event_code_to_name(3)
-
- papi_event_name_to_code(3)
-
- papi_flips(3)
-
- papi_flops(3)
-
- papi_get_cmp_opt(3)
- PAPI library/event set options PAPI_get_cmp_opt - get component specific PAPI options PAPI_set_opt - set PAPI library/event set options PAPIF_get_clockrate - ...
- papi_get_component_info(3)
- specific software
- papi_get_dmem_info(3)
- dynamic memory usage
- papi_get_event_info(3)
- event's name/description info
- papi_get_executable_info(3)
- executable's address space info
- papi_get_hardware_info(3)
- system hardware
- papi_get_multiplex(3)
- multiplexing status of specified event set PAPI_set_multiplex - convert standard event set to multiplexed event
- papi_get_opt(3)
- PAPI library/event set options PAPI_get_cmp_opt - get component specific PAPI options PAPI_set_opt - set PAPI library/event set options PAPIF_get_clockrate - ...
- papi_get_overflow_event_index(3)
- converts overflow vector into
- papi_get_real_cyc(3)
- real time counter value in clock cycles
- papi_get_real_usec(3)
- real time counter value in clock cycles
- papi_get_shared_lib_info(3)
- address info about shared libraries used by process
- papi_get_substrate_info(3)
- software substrate
- papi_get_thr_specific(3)
- Store/retrieve
- papi_get_virt_cyc(3)
- virtual time counter value in clock cycles
- papi_get_virt_usec(3)
- virtual time counter value in clock cycles
- papi_help(3)
- Performance Application Programming Interface
- papi_ipc(3)
- PAPI High level: Simplified call to get instructions per cycle, real and processor time
- papi_is_initialized(3)
-
- papi_library_init(3)
-
- papi_list_events(3)
- events in event set
- papi_list_threads(3)
- registered thread ids
- papi_lock(3)
- Lock one of two mutex variables defined in papi.h PAPI_unlock - Unlock one of mutex variables defined in papi.h
- papi_mem_info(1)
- provides info on memory architecture of current processor
- papi_multiplex_init(3)
- initialize multiplex support in PAPI library
- papi_native(3)
- Accessing PAPI native events
- papi_native_avail(1)
- provides detailed info for PAPI native events
- papi_num_cmp_hwctrs(3)
- return number of hardware counters for specified component
- papi_num_components(3)
- return number of components currently installed
- papi_num_counters(3)
- PAPI High Level: return number of hardware
- papi_num_events(3)
- return number of events in event set
- papi_num_hwctrs(3)
- return number of hardware counters on cpu
- papi_overflow(3)
- set up event set to begin registering overflows
- papi_perror(3)
-
- papi_presets(3)
- PAPI predefined named events
- papi_profil(3)
- make histogram of hardware counter overflows vs
- papi_query_event(3)
-
- papi_read(3)
- read hardware counters from event set
- papi_read_counters(3)
- PAPI High Level: read/reset counters
- papi_register_thread(3)
- Inform PAPI of thread
- papi_remove_event(3)
-
- papi_remove_events(3)
-
- papi_reset(3)
- reset hardware event counts in event set
- papi_set_cmp_domain(3)
- set default counting domain for new event sets bound to specified component
- papi_set_cmp_granularity(3)
- set default counting granularity for eventsets bound to specified component
- papi_set_debug(3)
- set current debug level for PAPI
- papi_set_domain(3)
- set default counting domain for new event sets bound to cpu component
- papi_set_event_info(3)
- set event's name, description and definition
- papi_set_granularity(3)
- set default counting granularity for eventsets bound to cpu component
- papi_set_multiplex(3)
- convert standard event set to multiplexed event
- papi_set_opt(3)
- PAPI library/event set options PAPI_get_cmp_opt - get component specific PAPI options PAPI_set_opt - set PAPI library/event set options PAPIF_get_clockrate - ...
- papi_set_thr_specific(3)
- Store/retrieve
- papi_shutdown(3)
- finish using PAPI/free all related resources
- papi_sprofil(3)
- make PC histogram data from multiple code regions
- papi_start(3)
- start counting hardware events in event set
- papi_start_counters(3)
- PAPI High Level: start counting hardware events
- papi_state(3)
- return counting state of EventSet
- papi_stop(3)
- start counting hardware events in event set
- papi_stop_counters(3)
- PAPI High Level: stop counting hardware events
- papi_strerror(3)
-
- papi_thread_id(3)
- thread identifier of current thread
- papi_thread_init(3)
- initialize thread support in PAPI library
- papi_unlock(3)
- Unlock one of mutex variables defined in papi.h
- papi_unregister_thread(3)
- Inform PAPI of thread
- papi_write(3)
-
- papif(3)
- Performance Application Programming Interface
- papif_get_clockrate(3)
- PAPI library/event set options PAPI_get_cmp_opt - get component specific PAPI options PAPI_set_opt - set PAPI library/event set options PAPIF_get_clockrate - ...
- papif_get_domain(3)
- PAPI library/event set options PAPI_get_cmp_opt - get component specific PAPI options PAPI_set_opt - set PAPI library/event set options PAPIF_get_clockrate - ...
- papif_get_exe_info(3)
- executable's address space info
- papif_get_granularity(3)
- PAPI library/event set options PAPI_get_cmp_opt - get component specific PAPI options PAPI_set_opt - set PAPI library/event set options PAPIF_get_clockrate - ...
- papif_get_preload(3)
- library preload setting
- papif_set_event_domain(3)
- set default counting domain for new event sets bound to cpu component
- paplay(1)
- Play back audio files on PulseAudio sound server
- paps(1)
- UTF-8 to PostScript converter using Pango
- par(1)
- parallel command processing
- parallel(1)
- run programs in parallel
- parcellite(1)
- Lightweight GTK+ Clipboard Manager
- parent(3)
- Establish ISA relationship with base classes at compile time
- pari(1)
- PARI calculator
- parport(3)
- representation of parallel port
- parport_list(3)
- collection of parallel ports
- parprouted(8)
- Proxy ARP IP bridging daemon
- parrot(1)
- Running
- parrot-nqp(1)
-
- parrot_config(1)
- Create src/parrot_config.c/variants
- parse.pl(1)
-
- parseargv(3)
- process options
- parsecmd(3)
- parse Tcl scripts/expressions
- parsedate(3)
- convert time/date string to number
- parsediasql(1)
-
- parsing(3)
- run-time library for parsers generated by ocamlyacc
- parted(8)
- partition change program
- partimage(1)
- back up/restore disk partitions
- partimaged(8)
- backup/restore partitions server
- partimaged-passwd(8)
- Manage partimaged user accounts
- partimagedusers(5)
- allowed users
- partprobe(8)
- inform OS of partition table changes
- partx(8)
- telling kernel about presence/numbering of on-disk partitions
- pass(1)
- stores, retrieves, generates, and synchronizes passwords securely
- passenger-config(1)
- config settings for Phusion Passenger
- passenger-memory-stats(8)
- reports snapshot of Apache/Phusion Passenger memory statistcs
- passenger-status(8)
- inspect Phusion Passenger's internal status
- passenger-stress-test(1)
- stress tests Phusion Passenger powered website
- passenger_selinux(8)
- Security Enhanced Policy for passenger processes
- passmass(1)
- change password on multiple machines
- passwd(1)
- update user's authentication
- passwd(5)
- password file
- passwd.nntp(5)
- passwords for connecting to remote NNTP servers
- passwd2des(3)
- RFS password encryption
- passwd_selinux(8)
- Security Enhanced Policy for passwd processes
- passwdgen(1)
- flexible random password generator
- password-auth-ac(5)
- Common config files for PAMified services written by authconfig
- paste(1)
- merge lines of files
- pasuspender(1)
- Temporarily suspend PulseAudio
- pat(5)
- Pattern description format
- pat2ppm(1)
- Converts image file from PAT to PPM format
- pat2spi(1)
-
- patch(1)
- apply diff file to original
- patchperl(1)
- patch perl source tree
- patchreader(3)
- Utilities to read/change patches/CVS
- patextract(1)
- Extract part of PNG image file
- patgen(1)
- make patterns for TeX hyphenation
- path(3)
- change file path names
- path_resolution(2)
- find file referred to by filename
- path_resolution(7)
- how pathname is resolved to file
- path_to_fshandle(3)
- file handle operations
- path_to_handle(3)
- file handle operations
- pathchk(1)
- check whether file names are valid/portable
- pathconf(3)
- config values for files
- pathfinder(1)
- simple file manager
- pathological(6)
- puzzle game involving paths/marbles
- pathplan(3)
- finds/smooths shortest paths
- pause(2)
- wait for signal
- pause(3)
- suspend thread until signal is received
- paw(1)
- invoke Physics Analysis Workstation package
- paw++(1)
- invoke Physics Analysis Workstation package
- pawd(1)
- print automounter working directory
- pawserv(8)
- CERNLIB program for serving PAW histograms remotely
- pawx11(1)
- invoke Physics Analysis Workstation package
- pax(1)
- read/write file archives/copy directory hierarchies
- pax11publish(1)
- PulseAudio X11 Credential Utility
- pb(1)
- builds packages for your projects
- pb.conf(5)
-
- pbc_disassemble(1)
- Parrot disassembler
- pbc_to_exe(1)
- make executables from Parrot bytecode
- pbdistrocheck(1)
- builds packages for your projects
- pbind(1)
- recombine output files generated by AS
- pbm(5)
- Netpbm bi-level image format
- pbm2g3(1)
- convert portable bitmaps into G3 fax files
- pbm2ppa(1)
- convert portable bitmap to HP's Printing Performance Architecture file format
- pbmclean(1)
- flip isolated pixels in portable bitmap
- pbmlife(1)
- apply Conway's rules of Life to PBM image
- pbmmake(1)
- create blank bitmap of specified size
- pbmmask(1)
- create mask bitmap from regular bitmap
- pbmminkowski(1)
- compute Minkowski integral
- pbmpage(1)
- create one page test pattern for printing
- pbmpscale(1)
- enlarge PBM image with edge smoothing
- pbmreduce(1)
- read PBM image/reduce it N times
- pbmtext(1)
- render text into PBM image
- pbmtextps(1)
- render text into PBM image using postscript interpreter
- pbmto10x(1)
- convert PBM image into Gemini 10X printer graphics
- pbmto4425(1)
- PBM images on AT&T 4425 terminal
- pbmtoascii(1)
- convert PBM image to ASCII graphics
- pbmtoatk(1)
- convert PBM image to Andrew Toolkit raster object
- pbmtobbnbg(1)
- convert PBM image into BitGraph graphics
- pbmtocis(1)
- convert PBM image to CompuServe RLE image
- pbmtocmuwm(1)
- convert PBM image into CMU window manager bitmap
- pbmtodjvurle(1)
- convert PBM image to DjVu Bitonal RLE format
- pbmtoepsi(1)
- convert PBM image to encapsulated PostScript style preview bitmap
- pbmtoepson(1)
- convert PBM image into Epson printer graphics
- pbmtoescp2(1)
- convert PBM image to ESC/P2 printer file
- pbmtog3(1)
- convert PBM image into Group 3 MH fax file
- pbmtogem(1)
- convert PBM image into GEM .img file
- pbmtogo(1)
- convert PBM image into compressed GraphOn graphics
- pbmtoibm23xx(1)
- convert PBM image to IBM 23XX printer stream
- pbmtoicon(1)
- convert PBM image into Sun icon
- pbmtolj(1)
- convert PBM image to HP LaserJet format
- pbmtoln03(1)
- convert PBM image to DEC LN03+ Sixel output
- pbmtolps(1)
- convert PBM image to PostScript
- pbmtomacp(1)
- convert PBM image into MacPaint file
- pbmtomatrixorbital(1)
- convert PBM image to Matrix Orbital LCD image
- pbmtomda(1)
- convert PBM image to Microdesign .mda
- pbmtomgr(1)
- convert PBM image into MGR bitmap
- pbmtomrf(1)
- convert PBM format image to MRF
- pbmtonokia(1)
- convert PBM image to Nokia Smart Messaging Formats
- pbmtopgm(1)
- convert PBM image to PGM by averaging areas
- pbmtopi3(1)
- convert PBM image into Atari Degas .pi3 file
- pbmtopk(1)
- convert PBM image into packed format font
- pbmtoplot(1)
- convert PBM image into Unix 'plot' file
- pbmtoppa(1)
- convert PBM image to HP Printer Performance Architecture
- pbmtopsg3(1)
- convert PBM images to Postscript with G3 fax compression
- pbmtoptx(1)
- convert PBM image into Printronix printer graphics
- pbmtowbmp(1)
- convert PBM image to wireless bitmap file
- pbmtox10bm(1)
- convert PBM image to X11 bitmap
- pbmtoxbm(1)
- convert PBM image to X11 bitmap
- pbmtoybm(1)
- convert PBM image into Bennet Yee 'face' file
- pbmtozinc(1)
- convert PBM image into Zinc bitmap
- pbmupc(1)
- create Universal Product Code PBM image
- pbs(1)
- general info on pbs
- pbs(3)
- Perl extension for PBS
- pbs_alterjob(3)
- alter pbs batch job
- pbs_checkpointjob(3)
- checkpoint pbs batch job
- pbs_connect(3)
- connect to pbs batch server
- pbs_default(3)
- return pbs default server name
- pbs_deljob(3)
- delete pbs batch job
- pbs_disconnect(3)
- disconnect from pbs batch server
- pbs_fbserver(3)
- pbs fall-back server name
- pbs_get_server_list(3)
- list of pbs server names
- pbs_geterrmsg(3)
- error message for last pbs batch operation
- pbs_gpumode(3)
- change GPU mode
- pbs_gpureset(3)
- reset GPU error counts
- pbs_holdjob(3)
- place hold on pbs batch job
- pbs_job_attributes(7)
- pbs job attribs
- pbs_locate(3)
- locate current location of pbs batch job
- pbs_manager(3)
- administrator pbs batch object
- pbs_mom(8)
- start pbs batch execution mini-server
- pbs_movejob(3)
- move pbs batch job to new destination
- pbs_msgjob(3)
- record message for running pbs batch job
- pbs_orderjob(3)
- reorder pbs batch jobs in queue
- pbs_queue_attributes(7)
- pbs queue attribs
- pbs_rerunjob(3)
- rerun pbs batch job
- pbs_rescquery(3)
- query resource availability
- pbs_rescreserve(3)
- reserve/free batch resources
- pbs_resources(7)
- pbs resources on
- pbs_resources_aix4(7)
- pbs Resources on IBM AIX 4
- pbs_resources_aix5(7)
- pbs Resources on IBM AIX 5
- pbs_resources_darwin(7)
- pbs resources on Darwin
- pbs_resources_digitalunix(7)
- pbs resources on DEC Unix
- pbs_resources_freebsd(7)
- pbs resources on FreeBSD
- pbs_resources_fujitsu(7)
- pbs resources on Fujitsu UXP/V
- pbs_resources_hpux10(7)
- pbs resources on HP UX
- pbs_resources_hpux11(7)
- pbs resources on HP UX
- pbs_resources_irix5(7)
- pbs resources on SGI Irix
- pbs_resources_irix6(7)
- pbs resources on SGI Irix
- pbs_resources_irix6array(7)
- pbs resources on SGI Irix
- pbs_resources_linux(7)
- pbs resources on
- pbs_resources_netbsd(7)
- pbs resources on NetBSD
- pbs_resources_solaris5(7)
- pbs resources on SUN Solaris
- pbs_resources_solaris7(7)
- pbs resources on SUN Solaris
- pbs_resources_sp2(7)
- pbs resources on IBM SP-2
- pbs_resources_sunos4(7)
- pbs resources on SunOS 4
- pbs_resources_unicos8(7)
- pbs resources under Unicos
- pbs_resources_unicosmk2(7)
- pbs resources under Unicos MK2
- pbs_rlsjob(3)
- release hold on pbs batch job
- pbs_runjob(3)
- run pbs batch job
- pbs_sched(8)
- pbs C scheduler
- pbs_sched_basl(8)
- pbs BASL scheduler
- pbs_sched_cc(8)
- pbs C scheduler
- pbs_sched_tcl(8)
- pbs Tcl scheduler
- pbs_selectjob(3)
- select pbs batch jobs
- pbs_selstat(3)
- obtain status of selected pbs batch jobs
- pbs_server(8)
- start pbs batch server
- pbs_server_attributes(7)
- pbs server attribs
- pbs_sigjob(3)
- send signal to pbs batch job
- pbs_stagein(3)
- request that files for pbs batch job be staged in
- pbs_statjob(3)
- obtain status of pbs batch jobs
- pbs_statnode(3)
- obtain status of pbs nodes
- pbs_statque(3)
- obtain status of pbs batch queues
- pbs_statserver(3)
- obtain status of pbs batch server
- pbs_submit(3)
- submit pbs batch job
- pbs_terminate(3)
- terminate pbs batch server
- pbsdsh(1)
- distribute task to nodes under pbs
- pbsnodes(8)
- pbs node change
- pbstop(1)
- monitoring utility for OpenPBS/Torque
- pbzip2(1)
- parallel bzip2 file compressor
- pc1toppm(1)
- convert Atari Degas .pc1 into PPM image
- pcap(3)
- Packet Capture library
- pcap-config(1)
- libpcap compiler/linker flags to stdout
- pcap-filter(7)
- packet filter syntax
- pcap-linktype(7)
- link-layer header types supported by libpcap
- pcap-savefile(5)
- libpcap savefile format
- pcap_activate(3)
- activate capture handle
- pcap_breakloop(3)
- force pcap_dispatch()/pcap_loop() call to return
- pcap_can_set_rfmon(3)
- check whether monitor mode can be set for not-yet-activated capture handle
- pcap_close(3)
- close capture device/savefile
- pcap_compile(3)
- compile filter expression
- pcap_create(3)
- create live capture handle
- pcap_datalink(3)
- link-layer header type
- pcap_datalink_name_to_val(3)
- link-layer header type value corresponding to header type name
- pcap_datalink_val_to_description(3)
- name/description for link-layer header type value
- pcap_datalink_val_to_name(3)
- name/description for link-layer header type value
- pcap_dispatch(3)
- process packets from live capture/savefile
- pcap_dump(3)
- packet to capture file
- pcap_dump_close(3)
- close savefile being written to
- pcap_dump_file(3)
- standard I/O stream for savefile being written
- pcap_dump_flush(3)
- flush to savefile packets dumped
- pcap_dump_fopen(3)
- open file to which to write packets
- pcap_dump_ftell(3)
- current file offset for savefile being written
- pcap_dump_open(3)
- open file to which to write packets
- pcap_file(3)
- standard I/O stream for savefile being read
- pcap_fileno(3)
- file descriptor for live capture
- pcap_findalldevs(3)
- list of capture devices
- pcap_fopen_offline(3)
- open saved capture file for reading
- pcap_free_datalinks(3)
- free list of link-layer header types from pcap_get_datalinks()
- pcap_freealldevs(3)
- free list of capture devices
- pcap_freecode(3)
- free BPF program
- pcap_get_selectable_fd(3)
- file descriptor on which select() can be done for live capture
- pcap_geterr(3)
- get/print libpcap error message text
- pcap_getnonblock(3)
- set/get state of non-blocking mode on capture device
- pcap_inject(3)
- transmit packet
- pcap_is_swapped(3)
- find out whether savefile has native byte order
- pcap_lib_version(3)
- version info for libpcap
- pcap_list_datalinks(3)
- list of link-layer header types supported by capture device
- pcap_lookupdev(3)
- find default device on which to capture
- pcap_lookupnet(3)
- find IPv4 network number/netmask for device
- pcap_loop(3)
- process packets from live capture/savefile
- pcap_major_version(3)
- version number of savefile
- pcap_minor_version(3)
- version number of savefile
- pcap_next(3)
- read next packet from pcap_t
- pcap_next_ex(3)
- read next packet from pcap_t
- pcap_offline_filter(3)
- check whether filter matches packet
- pcap_open_dead(3)
- open fake pcap_t for compiling filters/opening capture for output
- pcap_open_live(3)
- open device for capturing
- pcap_open_offline(3)
- open saved capture file for reading
- pcap_perror(3)
- get/print libpcap error message text
- pcap_sendpacket(3)
- transmit packet
- pcap_set_buffer_size(3)
- set buffer size for not-yet-activated capture handle
- pcap_set_datalink(3)
- set link-layer header type to be used by capture device
- pcap_set_promisc(3)
- set promiscuous mode for not-yet-activated capture handle
- pcap_set_rfmon(3)
- set monitor mode for not-yet-activated capture handle
- pcap_set_snaplen(3)
- set snapshot length for not-yet-activated capture handle
- pcap_set_timeout(3)
- set read timeout for not-yet-activated capture handle
- pcap_setdirection(3)
- set direction for which packets will be captured
- pcap_setfilter(3)
- set filter
- pcap_setnonblock(3)
- set/get state of non-blocking mode on capture device
- pcap_snapshot(3)
- snapshot length
- pcap_stats(3)
- capture statistics
- pcap_statustostr(3)
- convert PCAP_ERROR_/PCAP_WARNING_ value to string
- pcap_strerror(3)
- convert errno value to string
- pcapinfo(1)
- Prints detailed info about network devices
- pcb(1)
- Printed circuit board layout tool
- pcbitctl(8)
- PCBIT-D firmware loader
- pcc(1)
- front-end to C compiler
- pcc-cpp(1)
- C preprocessor
- pccardctl(8)
- PCMCIA card control utility
- pcdindex(1)
- renamed to pcdovtoppm
- pcdovtoppm(1)
- create index image for photo CD
- pciconfig_iobase(2)
- pci device info handling
- pciconfig_read(2)
- pci device info handling
- pciconfig_write(2)
- pci device info handling
- pcitweak(1)
- read/write PCI config space
- pclose(3)
- pipe stream to/from process
- pcmcia(5)
- PCMCIA card config database
- pcp(1)
- summarize Performance Co-Pilot installation
- pcp.conf(4)
- Performance Co-Pilot config/environment file
- pcp.env(4)
- set Performance Co-Pilot run-time environment variables
- pcpintro(1)
- introduction to Performance Co-Pilot
- pcpintro(3)
- introduction to Performance Co-Pilot libraries
- pcre(3)
- Perl-compatible regex
- pcre-config(1)
- return PCRE config
- pcre_compile(3)
- Perl-compatible regex
- pcre_compile2(3)
- Perl-compatible regex
- pcre_config(3)
- Perl-compatible regex
- pcre_copy_named_substring(3)
- Perl-compatible regex
- pcre_copy_substring(3)
- Perl-compatible regex
- pcre_dfa_exec(3)
- Perl-compatible regex
- pcre_exec(3)
- Perl-compatible regex
- pcre_free_substring(3)
- Perl-compatible regex
- pcre_free_substring_list(3)
- Perl-compatible regex
- pcre_fullinfo(3)
- Perl-compatible regex
- pcre_get_named_substring(3)
- Perl-compatible regex
- pcre_get_stringnumber(3)
- Perl-compatible regex
- pcre_get_stringtable_entries(3)
- Perl-compatible regex
- pcre_get_substring(3)
- Perl-compatible regex
- pcre_get_substring_list(3)
- Perl-compatible regex
- pcre_info(3)
- Perl-compatible regex
- pcre_maketables(3)
- Perl-compatible regex
- pcre_refcount(3)
- Perl-compatible regex
- pcre_study(3)
- Perl-compatible regex
- pcre_table(5)
- format of Postfix PCRE tables
- pcre_version(3)
- Perl-compatible regex
- pcreapi(3)
- Perl-compatible regex
- pcrebuild(3)
- Perl-compatible regex
- pcrecallout(3)
- Perl-compatible regex
- pcrecompat(3)
- Perl-compatible regex
- pcrecpp(3)
- Perl-compatible regex
- pcregrep(1)
- grep with Perl-compatible regex
- pcrematching(3)
- Perl-compatible regex
- pcrepartial(3)
- Perl-compatible regex
- pcrepattern(3)
- Perl-compatible regex
- pcreperform(3)
- Perl-compatible regex
- pcreposix(3)
- Perl-compatible regex
- pcreprecompile(3)
- Perl-compatible regex
- pcresample(3)
- Perl-compatible regex
- pcrestack(3)
- Perl-compatible regex
- pcresyntax(3)
- Perl-compatible regex
- pcretest(1)
- program for testing Perl-compatible regex
- pcscd(8)
- PC/SC Smart Card Daemon
- pcscd_selinux(8)
- Security Enhanced Policy for pcscd processes
- pct2rgb(1)
- pct2rgb.py Convert 8bit paletted image to 24bit RGB
- pcxtoppm(1)
- convert PCX file into PPM image
- pdbdump(1)
- Print contents of Palm PDB file
- pdbedit(8)
- manage SAM database
- pdbtool(1)
- application to test/convert syslog-ng pattern database rules
- pdcp(1)
- copy files to groups of hosts in parallel
- pdf180(1)
- rotate pages of pdf files
- pdf270(1)
- rotate pages of pdf files
- pdf2dsc(1)
- make PostScript page list of PDF document
- pdf2fax(8)
- image Portable Document Format file for facsimile transmission by Hyla FAX
- pdf2ps(1)
- Ghostscript PDF to PostScript translator
- pdf2swf(1)
- Converts Acrobat PDF files into Flash SWF Animation files
- pdf90(1)
- rotate pages of pdf files
- pdfbook(1)
- put pages of PDF files into 2-up signatures
- pdfcmb(1)
- PDF change MediaBox
- pdfedit(1)
- Editor for PDF files
- pdfetex(1)
- PDF output from e-TeX
- pdfflip(1)
- rotate pages of pdf files
- pdffonts(1)
- Portable Document Format font analyzer
- pdfimages(1)
- Portable Document Format image extractor
- pdfinfo(1)
- Portable Document Format document info extractor
- pdfinitex(1)
- PDF output from TeX
- pdfjadetex(1)
- processing tex files produced by TeX backend of Jade
- pdfjam(1)
- shell script for manipulating PDF files
- pdfjam-pocketmod(1)
- make 8-page PDF document into pocket-sized booklet
- pdfjam-slides3up(1)
- put presentation slides onto 3-up pages
- pdfjam-slides6up(1)
- put presentation slides onto 6-up pages
- pdfjoin(1)
- join together pages from multiple PDF files
- pdflatex(1)
- PDF output from TeX
- pdfnup(1)
- n-up pages of pdf files
- pdfopt(1)
- Ghostscript PDF Optimizer
- pdfpun(1)
- n-up pages of pdf file, with right-to-left ordering
- pdfshuffler(1)
- Application for PDF Merging, Rearranging, and Splitting
- pdftex(1)
- PDF output from TeX
- pdftexi2dvi(1)
- convert Texinfo documents to PDF
- pdftk(1)
- handy tool for manipulating PDF
- pdftohtml(1)
- convert pdf files into html, xml and png images
- pdftools(1)
- analyze PDF files, change image colors
- pdftoppm(1)
- Portable Document Format to Portable Pixmap converter
- pdftops(1)
- Portable Document Format to PostScript converter
- pdftosrc(1)
- extract source file/stream from PDF file
- pdftotext(1)
- Portable Document Format to text converter
- pdfvirtex(1)
- PDF output from TeX
- pdfxmltex(1)
- xml non-validating parser in TeX
- pdfxtex(1)
- PDF output from e-TeX
- pdiff(1)
- produce pretty comparison between files
- pdksh(1)
- Public domain Korn shell
- pdl(1)
- Introduction to Perl Data Language
- pdl(3)
- Perl Data Language
- pdl2(1)
- Simple shell for PDL
- pdldoc(1)
- shell interface to PDL documentation
- pdlpp(3)
-
- pdns_control(8)
- Control pDNS nameserver
- pdns_recursor(1)
- high-performance, simple and secure recursing nameserver
- pdns_server(8)
- PowerDNS nameserver
- pdsh(1)
- issue commands to groups of hosts in parallel
- pdu_api(3)
- pdu_api functions
- pdumpfs(8)
- daily backup system similar to Plan9's dumpfs
- pdvips(1)
- convert TeX DVI file to PostScript
- pecho_wchar(3)
- create/display curses pads
- pechochar(3)
- create/display curses pads
- pedal(1)
- pretty geometric picture program
- pedal(6)
- pretty geometric picture program
- pee(1)
- tee stdin to pipes
- peekfd(1)
- peek at file descriptors of running processes
- pef-config(8)
- configure PEF values
- pefconfig(8)
- show/configure BMC LAN parameters/set up PEF entry to send BMC LAN Alerts for OS Critical Stop log events
- pegasus_selinux(8)
- Security Enhanced Policy for pegasus processes
- pegex(3)
- Pegex Parser Generator
- pekwm(1)
- tabbed window manager
- pem(3)
- PEM routines
- pem_read_bio_dhparams(3)
- PEM routines
- pem_read_bio_dsa_pubkey(3)
- PEM routines
- pem_read_bio_dsaparams(3)
- PEM routines
- pem_read_bio_dsaprivatekey(3)
- PEM routines
- pem_read_bio_netscape_cert_sequence(3)
- PEM routines
- pem_read_bio_pkcs7(3)
- PEM routines
- pem_read_bio_privatekey(3)
- PEM routines
- pem_read_bio_pubkey(3)
- PEM routines
- pem_read_bio_rsa_pubkey(3)
- PEM routines
- pem_read_bio_rsaprivatekey(3)
- PEM routines
- pem_read_bio_rsapublickey(3)
- PEM routines
- pem_read_bio_x509(3)
- PEM routines
- pem_read_bio_x509_aux(3)
- PEM routines
- pem_read_bio_x509_crl(3)
- PEM routines
- pem_read_bio_x509_req(3)
- PEM routines
- pem_read_dhparams(3)
- PEM routines
- pem_read_dsa_pubkey(3)
- PEM routines
- pem_read_dsaparams(3)
- PEM routines
- pem_read_dsaprivatekey(3)
- PEM routines
- pem_read_netscape_cert_sequence(3)
- PEM routines
- pem_read_pkcs7(3)
- PEM routines
- pem_read_privatekey(3)
- PEM routines
- pem_read_pubkey(3)
- PEM routines
- pem_read_rsa_pubkey(3)
- PEM routines
- pem_read_rsaprivatekey(3)
- PEM routines
- pem_read_rsapublickey(3)
- PEM routines
- pem_read_x509(3)
- PEM routines
- pem_read_x509_aux(3)
- PEM routines
- pem_read_x509_crl(3)
- PEM routines
- pem_read_x509_req(3)
- PEM routines
- pem_write_bio_cms_stream(3)
-
- pem_write_bio_dhparams(3)
- PEM routines
- pem_write_bio_dsa_pubkey(3)
- PEM routines
- pem_write_bio_dsaparams(3)
- PEM routines
- pem_write_bio_dsaprivatekey(3)
- PEM routines
- pem_write_bio_netscape_cert_sequence(3)
- PEM routines
- pem_write_bio_pkcs7(3)
- PEM routines
- pem_write_bio_pkcs7_stream(3)
- output PKCS7 structure in PEM format
- pem_write_bio_pkcs8privatekey(3)
- PEM routines
- pem_write_bio_pkcs8privatekey_nid(3)
- PEM routines
- pem_write_bio_privatekey(3)
- PEM routines
- pem_write_bio_pubkey(3)
- PEM routines
- pem_write_bio_rsa_pubkey(3)
- PEM routines
- pem_write_bio_rsaprivatekey(3)
- PEM routines
- pem_write_bio_rsapublickey(3)
- PEM routines
- pem_write_bio_x509(3)
- PEM routines
- pem_write_bio_x509_aux(3)
- PEM routines
- pem_write_bio_x509_crl(3)
- PEM routines
- pem_write_bio_x509_req(3)
- PEM routines
- pem_write_bio_x509_req_new(3)
- PEM routines
- pem_write_dhparams(3)
- PEM routines
- pem_write_dsa_pubkey(3)
- PEM routines
- pem_write_dsaparams(3)
- PEM routines
- pem_write_dsaprivatekey(3)
- PEM routines
- pem_write_netscape_cert_sequence(3)
- PEM routines
- pem_write_pkcs7(3)
- PEM routines
- pem_write_pkcs8privatekey(3)
- PEM routines
- pem_write_pkcs8privatekey_nid(3)
- PEM routines
- pem_write_privatekey(3)
- PEM routines
- pem_write_pubkey(3)
- PEM routines
- pem_write_rsa_pubkey(3)
- PEM routines
- pem_write_rsaprivatekey(3)
- PEM routines
- pem_write_rsapublickey(3)
- PEM routines
- pem_write_x509(3)
- PEM routines
- pem_write_x509_aux(3)
- PEM routines
- pem_write_x509_crl(3)
- PEM routines
- pem_write_x509_req(3)
- PEM routines
- pem_write_x509_req_new(3)
- PEM routines
- pen(1)
-
- penctl(1)
-
- penetrate(1)
- simulates classic arcade shooting game
- penetrate(6)
- simulates classic arcade shooting game
- pengine(7)
- Policy Engine Options
- penlog(1)
-
- penlogd(1)
-
- penmount(4)
- PenMount input driver
- penrose(1)
- draws quasiperiodic tilings
- penrose(6)
- draws quasiperiodic tilings
- percept(3)
- Erlang Concurrency Profiling Tool
- percept_profile(3)
- Percept Collector
- perf(1)
- Performance analysis tools for
- perf-annotate(1)
- Read perf.data/display annotated code
- perf-archive(1)
- Create archive with object files with build-ids found in perf.data file
- perf-bench(1)
- General framework for benchmark suites
- perf-buildid-cache(1)
- Manage build-id cache
- perf-buildid-list(1)
- buildids in perf.data file
- perf-diff(1)
- Read two perf.data files/display differential profile
- perf-evlist(1)
- event names in perf.data file
- perf-help(1)
- help info about perf
- perf-inject(1)
- Filter to augment events stream with additional info
- perf-kmem(1)
- trace/measure kernel memory properties
- perf-kvm(1)
- trace/measure kvm guest os
- perf-list(1)
- all symbolic event types
- perf-lock(1)
- Analyze lock events
- perf-probe(1)
- Define new dynamic tracepoints
- perf-record(1)
- Run command/record its profile into perf.data
- perf-report(1)
- Read perf.data/display profile
- perf-sched(1)
- trace/measure scheduler properties
- perf-script(1)
- Read perf.data/display trace output
- perf-script-perl(1)
- Process trace data with Perl script
- perf-script-python(1)
- Process trace data with Python script
- perf-stat(1)
- Run command/gather performance counter statistics
- perf-test(1)
- Runs sanity tests
- perf-timechart(1)
- visualize total system behavior during workload
- perf-top(1)
- System profiling tool
- perf_event_open(2)
- set up performance monitoring
- perfmonctl(2)
- interface to IA-64 performance monitoring unit
- perfquery(8)
- query InfiniBand port counters
- perftest(1)
- ARC1 service performance tester
- perl(1)
- Practical Extraction/Report Language
- perl-nocem(8)
- NoCeM-on-spool implementation for INN 2.x
- perl.prov(1)
- what Perl source files provide
- perl.prov.files(1)
-
- perl.req(1)
- requirements for Perl scripts/libraries
- perl5004delta(1)
- what's new for perl5.004
- perl5005delta(1)
- what's new for perl5.005
- perl5100delta(1)
- what is new for perl 5.10.0
- perl5101delta(1)
- what is new for perl
- perl561delta(1)
- what's new for perl x
- perl56delta(1)
- what's new for perl
- perl570delta(1)
- what's new for perl
- perl571delta(1)
- what's new for perl
- perl572delta(1)
- what's new for perl
- perl573delta(1)
- what's new for perl
- perl581delta(1)
- what is new for perl
- perl582delta(1)
- what is new for perl
- perl583delta(1)
- what is new for perl
- perl584delta(1)
- what is new for perl
- perl585delta(1)
- what is new for perl
- perl586delta(1)
- what is new for perl
- perl587delta(1)
- what is new for perl
- perl588delta(1)
- what is new for perl
- perl589delta(1)
- what is new for perl
- perl58delta(1)
- what is new for perl
- perl590delta(1)
- what is new for perl
- perl591delta(1)
- what is new for perl
- perl592delta(1)
- what is new for perl
- perl593delta(1)
- what is new for perl
- perl594delta(1)
- what is new for perl
- perl595delta(1)
- what is new for perl
- perl5lib(3)
- Honour PERL5LIB even in taint mode
- perl6(1)
- Rakudo Perl 6 Compiler
- perlaix(1)
- Perl on IBM Unix systems
- perlamiga(1)
- Perl under Amiga OS
- perlapi(1)
- autogenerated documentation for perl public API
- perlapio(1)
- perl's IO abstraction interface
- perlapollo(1)
- Perl on Apollo DomainOS
- perlartistic(1)
- Perl Artistic License
- perlbeos(1)
- Perl + on BeOS
- perlbook(1)
- Perl book info
- perlboot(1)
- Beginner's Object-Oriented Tutorial
- perlbot(1)
- Bag'o Object Tricks
- perlbrew(1)
- Perl Environment manager
- perlbs2000(1)
- building/installing Perl for BS2000
- perlbug(1)
- how to submit bug reports on Perl
- perlcall(1)
- Perl calling conventions from C
- perlcc(1)
- make executables from Perl programs
- perlce(1)
- Perl for WinCE
- perlcheat(1)
- Perl 5 Cheat Sheet
- perlclib(1)
- Internal replacements for standard C library functions
- perlcn(1)
- XXXXXXXXX Perl XXXXXX
- perlcommunity(1)
- brief overview of Perl community
- perlcompile(1)
- Introduction to Perl Compiler-Translator
- perlcritic(1)
- interface to critique Perl source
- perlcygwin(1)
- Perl for Cygwin
- perldata(1)
- Perl data types
- perldbmfilter(1)
- Perl DBM Filters
- perldebguts(1)
- Guts of Perl debugging
- perldebtut(1)
- Perl debugging tutorial
- perldebug(1)
- Perl debugging
- perldelta(1)
- what is new for perl
- perldgux(1)
- Perl under DG/UX
- perldiag(1)
- various Perl diagnostics
- perldl(1)
-
- perldoc(1)
- Look up Perl documentation in Pod format
- perldos(1)
- Perl under DOS, W31, W95
- perldsc(1)
- Perl Data Structures Cookbook
- perlebcdic(1)
- Considerations for running Perl on EBCDIC platforms
- perlembed(1)
- how to embed perl in your C program
- perlepoc(1)
- Perl for EPOC
- perlfaq(1)
- frequently asked questions about Perl
- perlfaq1(1)
- General Questions About Perl
- perlfaq2(1)
- Obtaining/Learning about Perl
- perlfaq3(1)
- Programming Tools
- perlfaq4(1)
- Data change
- perlfaq5(1)
- Files/Formats
- perlfaq6(1)
- regex
- perlfaq7(1)
- General Perl Language Issues
- perlfaq8(1)
- System Interaction
- perlfaq9(1)
- Networking
- perlfilter(1)
- Source Filters
- perlfilter(3)
- Source Filters
- perlfork(1)
- Perl's fork() emulation
- perlform(1)
- Perl formats
- perlfreebsd(1)
- Perl on FreeBSD systems
- perlfunc(1)
- Perl builtin functions
- perlglossary(1)
- Perl Glossary
- perlgpl(1)
- GNU General Public License
- perlguts(1)
- Introduction to Perl API
- perlhack(1)
- How to hack at Perl internals
- perlhaiku(1)
- Perl + on Haiku
- perlhist(1)
- Perl history records
- perlhpux(1)
- Perl on Hewlett-Packard Unix systems
- perlhurd(1)
- Perl on Hurd
- perlilog(3)
- Verilog environment/IP core handling in Perl
- perlinfo(1)
- frontend to HTML::Perlinfo
- perlintern(1)
- autogenerated documentation of purely internal
- perlintro(1)
- brief introduction/overview of Perl
- perlio(3)
- On demand loader for PerlIO layers/root of PerlIO::* name space
- perliol(1)
- C API for Perl's implementation of IO in Layers
- perlipc(1)
- Perl interprocess communication
- perlirix(1)
- Perl on Irix systems
- perlivp(1)
- Perl Installation Verification Procedure
- perljp(1)
- XXXXXXX Perl XXXXXXX
- perlko(1)
- PerlXX XXXXXXXX XXXXXXX
- perllexwarn(1)
- Perl Lexical Warnings
- perllinux(1)
- Perl on systems
- perllocale(1)
- Perl locale handling
- perllol(1)
- Manipulating Arrays of Arrays in Perl
- perlmachten(1)
- Perl on Power MachTen systems
- perlmacos(1)
- Perl under Mac OS
- perlmacosx(1)
- Perl under Mac OS X
- perlmine.pl(1)
- game to clear hidden mines from minefield
- perlmint(1)
- Perl on Atari MiNT
- perlmod(1)
- Perl modules
- perlmodinstall(1)
- Installing CPAN Modules
- perlmodlib(1)
- constructing new Perl modules/finding existing ones
- perlmodstyle(1)
- Perl module style guide
- perlmpeix(1)
- Perl/iX for HP e3000 MPE
- perlmroapi(1)
- Perl method resolution plugin interface
- perlnetware(1)
- Perl for NetWare
- perlnewmod(1)
- preparing new module for distribution
- perlnumber(1)
- semantics of numbers/numeric operations in Perl
- perlobj(1)
- Perl objects
- perlop(1)
- Perl operators/precedence
- perlopenbsd(1)
- Perl on OpenBSD systems
- perlopentut(1)
- tutorial on opening things in Perl
- perlos2(1)
- Perl under OS/2, DOS, Win0.3*, Win0.95 and WinNT
- perlos390(1)
- building/installing Perl for OS/390/z/OS
- perlos400(1)
- Perl on OS/400
- perlothrtut(1)
- old tutorial on threads in Perl
- perlpacktut(1)
- tutorial on pack/unpack
- perlperf(1)
- Perl Performance/Optimization Techniques
- perlplan9(1)
- Plan 9-specific documentation for Perl
- perlpod(1)
- Plain Old Documentation format
- perlpod(3)
- Plain Old Documentation format
- perlpodspec(1)
- Plain Old Documentation: format specification/notes
- perlpodspec(3)
- Plain Old Documentation: format specification/notes
- perlport(1)
- Writing portable Perl
- perlpragma(1)
- how to write user pragma
- perlqnx(1)
- Perl on QNX
- perlre(1)
- Perl regex
- perlreapi(1)
- perl regex plugin interface
- perlrebackslash(1)
- Perl regex Backslash Sequences/Escapes
- perlrecharclass(1)
- Perl regex char Classes
- perlref(1)
- Perl references/nested data structures
- perlreftut(1)
- Mark's very short tutorial about references
- perlreguts(1)
- Description of Perl regex engine
- perlrepository(1)
- Using Perl source repository
- perlrequick(1)
- Perl regex quick start
- perlreref(1)
- Perl regex Reference
- perlretut(1)
- Perl regex tutorial
- perlriscos(1)
- Perl for RISC OS
- perlrun(1)
- how to execute Perl interpreter
- perlsec(1)
- Perl security
- perlsolaris(1)
- Perl on Solaris systems
- perlstyle(1)
- Perl style guide
- perlsub(1)
- Perl subroutines
- perlsymbian(1)
- Perl on Symbian OS
- perlsyn(1)
- Perl syntax
- perltetris.pl(1)
- tetris game
- perlthanks(1)
- how to submit bug reports on Perl
- perlthrtut(1)
- Tutorial on threads in Perl
- perltidy(1)
- perl script indenter/reformatter
- perltie(1)
- how to hide object class in simple variable
- perltoc(1)
- perl documentation table of contents
- perltodo(1)
- Perl TO-DO List
- perltooc(1)
- Tom's OO Tutorial for Class Data in Perl
- perltoot(1)
- Tom's object-oriented tutorial for perl
- perltrap(1)
- Perl traps for unwary
- perltru64(1)
- Perl on Tru64 systems
- perltw(1)
- XXXXXXXX Perl XXXXXX
- perlunicode(1)
- Unicode support in Perl
- perlunifaq(1)
- Perl Unicode FAQ
- perluniintro(1)
- Perl Unicode introduction
- perlunitut(1)
- Perl Unicode Tutorial
- perlutil(1)
- utilities packaged with Perl distribution
- perluts(1)
- Perl under UTS
- perlvar(1)
- Perl predefined variables
- perlver(1)
- Perl Minimum Version Analyzer
- perlvmesa(1)
- building/installing Perl for VM/ESA
- perlvms(1)
- VMS-specific documentation for Perl
- perlvos(1)
- Perl for Stratus VOS
- perlwin32(1)
- Perl under Windows
- perlxs(1)
- XS language reference manual
- perlxstut(1)
- Tutorial for writing XSUBs
- permview(1)
- Viewer for declarative security permission sets inside assemblies
- perror(1)
- explain error codes
- perror(3)
- print system error message
- personality(2)
- set process execution domain
- persp_project(3)
- Projects 3d point into 2d screen space. Allegro game programming library
- persp_project_f(3)
- Projects 3d point into 2d screen space. Allegro game programming library
- pervasives(3)
- initially opened module
- pervasives.largefile(3)
- Operations on large files
- pethtool(8)
- Display/change ethernet card settings
- petit(1)
- log analysis tool for systems administrators
- petri(1)
- simulates mold growing in petri dish
- petri(6)
- simulates mold growing in petri dish
- pf2afm(1)
- Make AFM file from Postscript font files using ghostscript
- pf_key(5)
- lists PF_KEY sockets registered with KLIPS
- pfacter(3)
- Collect/display facts about system
- pfaedit(1)
- create/modify PostScript/TrueType fonts
- pfb2pfa(1)
- convert type1 pfb file into pfa
- pfbtopfa(1)
- Convert Postscript .pfb fonts to .pfa format using ghostscript
- pfbtops(1)
- translate PostScript font in .pfb format to ASCII
- pfc(1)
- active precompiled filters generator
- pfcat(1)
- grep out function definitions from perlfunc
- pfhandle(5)
- manage postfix mail queue
- pflogsumm(1)
- Produce Postfix MTA logfile summary
- pfm(5)
- PFM graphic image file format
- pfm_dispatch_events(3)
- determine PMC registers values for set of events to measure
- pfm_find_event(3)
- search for events/unit masks
- pfm_find_event_bycode(3)
- search for events/unit masks
- pfm_find_event_bycode_next(3)
- search for events/unit masks
- pfm_find_event_mask(3)
- search for events/unit masks
- pfm_find_full_event(3)
- search for events/unit masks
- pfm_force_pmu(3)
- query library about supported PMU models
- pfm_get_cycle_event(3)
- basic event descriptors
- pfm_get_event_code(3)
- event info
- pfm_get_event_code_counter(3)
- event info
- pfm_get_event_counters(3)
- event info
- pfm_get_event_description(3)
- event info
- pfm_get_event_mask_code(3)
- event info
- pfm_get_event_mask_description(3)
- event info
- pfm_get_event_mask_name(3)
- event info
- pfm_get_event_name(3)
- event info
- pfm_get_full_event_name(3)
- event info
- pfm_get_hw_counter_width(3)
- return bitmask of implemented PMU registers/number of PMU registers
- pfm_get_impl_counters(3)
- return bitmask of implemented PMU registers/number of PMU registers
- pfm_get_impl_pmcs(3)
- return bitmask of implemented PMU registers/number of PMU registers
- pfm_get_impl_pmds(3)
- return bitmask of implemented PMU registers/number of PMU registers
- pfm_get_inst_retired(3)
- basic event descriptors
- pfm_get_max_event_name_len(3)
- event info
- pfm_get_num_counters(3)
- return bitmask of implemented PMU registers/number of PMU registers
- pfm_get_num_events(3)
- event info
- pfm_get_num_pmcs(3)
- return bitmask of implemented PMU registers/number of PMU registers
- pfm_get_num_pmds(3)
- return bitmask of implemented PMU registers/number of PMU registers
- pfm_get_pmu_name(3)
- query library about supported PMU models
- pfm_get_pmu_name_bytype(3)
- query library about supported PMU models
- pfm_get_pmu_type(3)
- query library about supported PMU models
- pfm_get_version(3)
- performance monitoring library version
- pfm_initialize(3)
- initialize performance monitoring library
- pfm_list_supported_pmus(3)
- query library about supported PMU models
- pfm_pmu_is_supported(3)
- query library about supported PMU models
- pfm_regmask_and(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_regmask_clr(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_regmask_copy(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_regmask_eq(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_regmask_isset(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_regmask_or(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_regmask_set(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_regmask_weight(3)
- operations on pfmlib_regmask_t bitmasks
- pfm_set_options(3)
- set performance monitoring library debug options
- pfm_strerror(3)
- return string describing error code
- pfmtopam(1)
- Convert PFM image to Netpbm format
- pfq(1)
- stock porfolio query
- pfqueue(1)
- queue realtime scanner for MTA
- pfqueue.conf(5)
- pfqueue config file
- pftp(1)
- Internet file transfer program
- pfunc(1)
- grep for perl functions
- pg(3)
- Distributed, Named Process Groups
- pg2(3)
- Distributed Named Process Groups
- pg_config(1)
- installed version of PostgreSQL
- pg_conndefaults(7)
- connection options/their defaults
- pg_connect(7)
- open connection to server
- pg_controldata(1)
- control info of PostgreSQL database cluster
- pg_ctl(1)
- start, stop, or restart PostgreSQL server
- pg_disconnect(7)
- close connection to server
- pg_dump(1)
- extract PostgreSQL database into script file/other archive file
- pg_dumpall(1)
- extract PostgreSQL database cluster into script file
- pg_exec(7)
- send command to server
- pg_execute(7)
- send query/loop over results
- pg_listen(7)
- set/change callback for asynchronous notification messages
- pg_lo_close(7)
- close large object
- pg_lo_creat(7)
- create large object
- pg_lo_export(7)
- export large object to file
- pg_lo_import(7)
- import large object from file
- pg_lo_lseek(7)
- seek to position of large object
- pg_lo_open(7)
- open large object
- pg_lo_read(7)
- read from large object
- pg_lo_tell(7)
- return current seek position of large object
- pg_lo_unlink(7)
- delete large object
- pg_lo_write(7)
- to large object
- pg_on_connection_loss(7)
- set/change callback for unexpected connection loss
- pg_resetxlog(1)
- reset write-ahead log/other control info of PostgreSQL database cluster
- pg_restore(1)
- restore PostgreSQL database from archive file created by pg_dump
- pg_result(7)
- command result
- pg_select(7)
- loop over result of query
- pgawk(1)
- pattern scanning/processing
- pgm(5)
- Netpbm grayscale image format
- pgmabel(1)
- create cross section using Abel Integration for Deconvolution
- pgmake-db(1)
- make utility using Makefile::Parser::GmakeDB, Makefile::AST, and Makefile::AST::Evaluator
- pgmap(1)
- utility for getting info from kernel's pagemap interface
- pgmbentley(1)
- Bentleyize PGM image
- pgmcrater(1)
- create cratered terrain by fractal forgery
- pgmdeshadow(1)
- Deshadow PGM image
- pgmedge(1)
- replaced by pamedge
- pgmenhance(1)
- edge-enhance PGM image
- pgmhist(1)
- print histogram of values in PGM image
- pgmkernel(1)
- make convolution kernel
- pgmmake(1)
- create PGM image of specified gray level/dimensions
- pgmmedian(1)
- apply median filter to PGM file
- pgmminkowski(1)
- compute Minkowski integral
- pgmmorphconv(1)
- perform morphological convolutions: dilation, erosion
- pgmnoise(1)
- create PGM image made up of white noise
- pgmnorm(1)
- replaced by pnmnorm
- pgmoil(1)
- replaced by pamoil
- pgmramp(1)
- make grayscale ramp
- pgmslice(1)
- extract one line of pixel values out of PGM
- pgmspace(3)
- Data in Program Space
- pgmtexture(1)
- calculate textural features on PGM image
- pgmtofs(1)
- convert PGM image to Usenix FaceSaver format
- pgmtolispm(1)
- convert PGM image to Lisp Machine format
- pgmtopbm(1)
- convert PGM image to PBM
- pgmtopgm(1)
- copy PGM image
- pgmtoppm(1)
- colorize PGM image into PPM image
- pgmtoy4m(1)
- Convert mpeg2dec pgm/pgmpipe output to YUV4MPEG2
- pgpool(8)
- PostgreSQL connection pool daemon
- pgpverify(1)
- Cryptographically verify Usenet control messages
- pgpverify(8)
- cryptographically verify Usenet control messages
- pgrep(1)
- look up/signal processes based on name/other
- pgsql_table(5)
- Postfix PostgreSQL client config
- pgtclsh(1)
- PostgreSQL Tcl shell client
- pgtune(8)
- PostgreSQL Config Tuner
- phc2sys(8)
- synchronize two clocks
- phcon(3)
- mbk physical connector
- phfig(3)
- mbk physical figure
- phins(3)
- mbk physical instance
- pho(1)
- View/annotate multiple images
- phoa2d(1)
- gcin's Bopomofo tools
- phonetize(1)
- print string in phonetic alphabet for easy reading
- phoronix-test-suite(1)
- Phoronix Test Suite is extensible open-source platform for performing testing/performance evaluation
- phosphor(1)
- simulates old terminal with long-sustain phosphor
- phosphor(6)
- simulates old terminal with long-sustain phosphor
- photopile(6)
- displays multiple images in periodically shuffled pile
- photorec(1)
- Recover lost files from harddisk, digital camera and cdrom
- photorec(8)
- Recover lost files from harddisk, digital camera and cdrom
- php(1)
- PHP CLI 'CLI'
- php-config(1)
- PHP config/compile options
- php-fpm(8)
- PHP FastCGI Process Manager 'PHP-FPM'
- php2po(1)
- convert PHP localization files to Gettext PO localization files
- phpize(1)
- prepare PHP extension for compiling
- phref(3)
- mbk physical reference
- phseg(3)
- mbk physical segment
- phvia(3)
- mbk physical contact
- phys(2)
- unimplemented system calls
- pi(8)
-
- pi-getram(1)
- Retrieves RAM image from your Palm device
- pi-getrom(1)
- Retrieves ROM image from your Palm device for use in debugging
- pi1toppm(1)
- convert Atari Degas .pi1 into PPM image
- pi3topbm(1)
- convert Atari Degas .pi3 file into PBM image
- pia(1)
- play media files
- pianobar(1)
- console pandora.com music player
- pic(1)
- compile pictures for troff/TeX
- pic2graph(1)
- convert PIC diagram into cropped image
- pic2tpic(1)
- Convert pic files to tpic format
- pickup(8)
- Postfix local mail pickup
- pico(1)
- simple text editor in style of Alpine Composer
- picocom(8)
- minimal dumb-terminal emulation program
- piconv(1)
- iconv, reinvented in perl
- picprog(1)
- Microchip PIC programmer for serial port device
- pidfile(3)
- library for PID files handling
- pidgin(1)
- Instant Messaging client
- pidgin(3)
- Perl extension for Pidgin instant messenger
- pidl(1)
- IDL compiler written in Perl
- pidof(8)
- find process ID of running program
- pidstat(1)
- Report statistics for tasks
- pidstatd(1)
- Determine if process ID is running for Perl IPC::Locker
- pidwatch(1)
- Run command and if another PID exits, kill command
- piecewise(1)
- lots of moving circles intersecting in interesting ways
- piecewise(6)
- lots of moving circles intersecting in interesting ways
- pifconfig(8)
- network interface
- pigeonhole(7)
- Overview of Pigeonhole project's Sieve support for Dovecot secure IMAP/POP3 server
- pigz(1)
- compress/expand files
- piklab(1)
-
- piklab-hex(1)
-
- piklab-prog(1)
-
- pilot(1)
- simple file system browser in style of Alpine Composer
- pilot-addresses(1)
- Read/write address book databases to/from Palm handheld
- pilot-clip(1)
- Get/Set Palm Clipboard contents from STDOUT/STDIN
- pilot-csd(1)
- Connection Service Daemon for Palm Devices
- pilot-debugsh(1)
- Simple debugging console for Palm Handheld device [deprecated]
- pilot-dedupe(1)
- Removes duplicate records from any Palm database
- pilot-dlpsh(1)
- interactive Desktop Link Protocol Shell for your Palm device
- pilot-file(1)
- Dump application/header info from your local PRC/PDB files
- pilot-foto(1)
- Palm 'Foto' Image Installer/Remover/Fetcher/Converter
- pilot-foto-treo600(1)
- Copies Treo foto databases to current directory/extracts image files from within them
- pilot-foto-treo650(1)
- Copies Treo foto databases/videos to current directory
- pilot-getram(1)
- Retrieves RAM image from your Palm device for use in debugging
- pilot-getrom(1)
- Retrieves ROM image from your Palm device for use in debugging
- pilot-getromtoken(1)
- Reads ROM token from Palm Handheld device
- pilot-hinotes(1)
- Syncronize your Hi-Notes database with your desktop machine
- pilot-install-datebook(1)
- Installs one/more new datebook entries onto your Palm handheld
- pilot-install-expenses(1)
- Install expense record entries onto your Palm handheld device
- pilot-install-hinote(1)
- Install local files into your Hi-Note database on your Palm handheld
- pilot-install-memo(1)
- Installs new Memo Pad entry onto your Palm handheld
- pilot-install-netsync(1)
- reads/sets Network Preferences info on Palm Device
- pilot-install-todo(1)
- Updates Palm ToDo list with one new entry
- pilot-install-todos(1)
- Updates Palm ToDo list with entries from local file
- pilot-install-user(1)
- Reads/sets Palm User/UserID on Palm Device
- pilot-link(7)
- suite of tools for communicating with Palm handhelds, such as those made by Palm, Handspring, Handera, TRGPro, Sony or other Palm Compatible Handheld PDA device
- pilot-memos(1)
- change Memo entries from file/your Palm device
- pilot-nredir(1)
- Accept connection/redirect via Network Hotsync Protocol
- pilot-read-expenses(1)
- Export Palm Expense application data in text format
- pilot-read-ical(1)
- Exports DatebookDB/ToDo applications to ical format
- pilot-read-notepad(1)
- record info found in Palm Notepad
- pilot-read-palmpix(1)
- Convert all pictures in files given/found on Palm handheld
- pilot-read-screenshot(1)
- Read screenshots from Palm
- pilot-read-todos(1)
- Syncronize your Palm ToDo application's database with your desktop machine
- pilot-read-veo(1)
- Synchronize your Veo Traveler databases
- pilot-reminders(1)
- Exports your Palm Datebook database into remind data file format
- pilot-schlep(1)
- Pack arbitrary file/install it on your Palm/unpack file from your Palm
- pilot-wav(1)
- Decodes Palm Voice Memo files to wav files you can read on your desktop
- pilot-xfer(1)
- Backup, sync, and restore databases from Palm handheld device
- pine(1)
- Alternatively Licensed Program for Internet News/Email
- pinfo(1)
- curses based lynx-style info browser
- ping(8)
- send ICMP ECHO_REQUEST to network hosts
- ping6(8)
- send ICMP ECHO_REQUEST to network hosts
- ping_construct(3)
- Constructor for liboping class
- ping_get_error(3)
- Return last error message
- ping_host_add(3)
- Add host to liboping object
- ping_iterator_get(3)
- Iterate over all hosts of liboping object
- ping_iterator_get_context(3)
- Store host-dependent data
- ping_iterator_get_info(3)
- Receive info about host
- ping_selinux(8)
- Security Enhanced Policy for ping processes
- ping_send(3)
- Send ICMP echo requests to all associated hosts/wait for ICMP echo responses to arrive
- ping_setopt(3)
- Set options for liboping object
- pingd(8)
- node up/down monitoring daemon
- pingd.conf(5)
- pingd config file
- pingd_selinux(8)
- Security Enhanced Policy for pingd processes
- pinion(6)
- draws scrolling sequence of interconnected gears
- pinky(1)
- lightweight finger
- pioneers(6)
- network implementation of Settlers of Catan
- pioneers-meta-server(6)
- meta game server for Pioneers
- pioneers-server-console(6)
- game server for Pioneers
- pioneers-server-gtk(6)
- graphical game server for Pioneers
- pioneersai(6)
- AI player for Pioneers
- pipe(2)
- create pipe
- pipe(3)
- create interprocess channel
- pipe(7)
- overview of pipes/FIFOs
- pipe(8)
- Postfix delivery to external command
- pipe2(2)
- create pipe
- pipeline(3)
- Generic pipeline interface
- pipes(6)
- fill screen with plumbing system
- pipethrough(3)
- pipe buffer through child command/receive two buffers containing stdout/stderr output of child process
- piranha_fos_selinux(8)
- Security Enhanced Policy for piranha_fos processes
- piranha_lvs_selinux(8)
- Security Enhanced Policy for piranha_lvs processes
- piranha_pulse_selinux(8)
- Security Enhanced Policy for piranha_pulse processes
- piranha_selinux(8)
- Security Enhanced Policy for piranha processes
- piranha_web_selinux(8)
- Security Enhanced Policy for piranha_web processes
- pirl(1)
- read-eval-print loop in Perl
- pirut(8)
- graphical software installer/remover
- pisg(1)
- Perl IRC Statistics Generator
- pitchplay(1)
- play audio tracks with cdda2wav with different pitches through soundcard
- piv-tool(1)
- smart card utility for HSPD-12 PIV cards
- pivot_root(2)
- change root file system
- pivot_root(8)
- change root file system
- pivot_scaled_sprite(3)
- Rotates/stretches sprite around specified point. Allegro game programming library
- pivot_scaled_sprite_v_flip(3)
- Rotates, stretches and flips sprite around specified point. Allegro game programming library
- pivot_sprite(3)
- Rotates sprite around specified point. Allegro game programming library
- pivot_sprite_v_flip(3)
- Rotates/flips sprite around specified point. Allegro game programming library
- pj_init(3)
- initialize cartographic projection
- pjtoppm(1)
- convert HP PaintJet file to PPM image
- pk-debuginfo-install(1)
- Debugging Packages Installer
- pk-device-rebind(1)
- Device software reloader
- pk2bm(1)
- create bitmap from TeX pkfont
- pk_config_data(5)
- config file for pkcsslotd
- pkaction(1)
- details about registered action
- pkcheck(1)
- Check whether process is authorized
- pkcon(1)
- PackageKit console client
- pkcs11-helper-1(8)
- Simplified PKCS#11 library
- pkcs11-tool(1)
- utility for managing/using PKCS #11 security tokens
- pkcs11_eventmgr(1)
- SmartCard PKCS#11 Event Manager
- pkcs11_inspect(1)
- print certificate contents
- pkcs11_listcerts(1)
- SmartCard PKCS#11 certificates listing
- pkcs11_setup(1)
- SmartCard PKCS#11 setup
- pkcs11_startup(1)
-
- pkcs12(1)
- PKCS#12 file utility
- pkcs12_create(3)
- create PKCS#12 structure
- pkcs12_parse(3)
- parse PKCS#12 structure
- pkcs15-crypt(1)
- perform crypto operations using pkcs15 smart card
- pkcs15-init(1)
- smart card personalization utility
- pkcs15-profile(5)
- format of profile for pkcs15-init
- pkcs15-tool(1)
- utility for manipulating PKCS #15 data structures on smart cards/similar security tokens
- pkcs7(1)
- PKCS#7 utility
- pkcs7_decrypt(3)
- decrypt content from PKCS#7 envelopedData structure
- pkcs7_encrypt(3)
- create PKCS#7 envelopedData structure
- pkcs7_sign(3)
- create PKCS#7 signedData structure
- pkcs7_sign_add_signer(3)
- add signer PKCS7 signed data structure
- pkcs7_verify(3)
- verify PKCS#7 signedData structure
- pkcs8(1)
- PKCS#8 format private key conversion tool
- pkcsconf(1)
-
- pkcsslotd(8)
- shared memory manager for opencryptoki
- pkcsslotd_selinux(8)
- Security Enhanced Policy for pkcsslotd processes
- pkexec(1)
- Execute command as another user
- pkey(1)
- public/private key processing tool
- pkeyparam(1)
- public key algorithm parameter processing tool
- pkeyutl(1)
- public key algorithm utility
- pkg-config(1)
- Return metainformation about installed libraries
- pkgdata(1)
- package data for use by ICU
- pkgenpack(1)
- PackageKit Pack Generator
- pkgrequire(3)
- package version control
- pkill(1)
- look up/signal processes based on name/other
- pklocalauthority(8)
- PolicyKit Local Authority
- pklogin_finder(1)
- maps certificates into user
- pkmon(1)
- PackageKit console client
- pkpgcounter(1)
- count number of pages required to print various types of documents
- pktogf(1)
- convert packed font files to generic font files
- pktopbm(1)
- convert packed format font into PBM
- pktsetup(8)
- set up/tear down packet device associations
- pktstat(1)
- packet activity on crt
- pktype(1)
- verify/translate packed font bitmap file to plain text
- pl(1)
- SWI-Prolog 5.7.11
- pl2pm(1)
- translate Perl4 .pl files to Perl5 .pm modules
- pl_setcontlabelformat(3)
- Set format of numerical label for contours
- pl_setcontlabelparam(3)
- Set parameters of contour labelling other than format of numerical label
- pladv(3)
- Advance page
- plainrsa-gen(8)
- generator for Plain RSA keys
- plane(6)
- draw 3 dimensional plane
- planesofscreen(3)
- screen info functions/macros
- planets(1)
- Gravitational simulation of planetary bodies
- planner(1)
- Project Management application for GNOME
- plantuml(1)
- Java Tool for Quickly Write Diagrams
- plarc(3)
- Draw circular/elliptical arc
- plasmaengineexplorer(1)
- Provides direct access to plasma data engines
- plaxes(3)
- Draw box with axes, etc. with arbitrary origin
- play(1)
- Sound eXchange, Swiss Army knife of audio change
- play_audio_stream(3)
- Creates new audio stream/starts playing it. Allegro game programming library
- play_fli(3)
- Plays FLI/FLC animation from disk. Allegro game programming library
- play_looped_midi(3)
- Starts playing MIDI file with user-defined loop position. Allegro game programming library
- play_memory_fli(3)
- Plays FLI/FLC animation from memory. Allegro game programming library
- play_midi(3)
- Starts playing specified MIDI file. Allegro game programming library
- play_sample(3)
- Plays sample. Allegro game programming library
- playbucket(1)
- plays bucket corresponding to specified file
- playdv(1)
- digital video streams on screen
- plaympeg(1)
- MPEG audio/video player
- plbin(3)
- Plot histogram from binned data
- plbop(3)
- Begin new page
- plbox(3)
- Draw box with axes, etc
- plbox3(3)
- Draw box with axes, etc, in 3-d
- plcalc_world(3)
- Calculate world coordinates/corresponding window index from relative device coordinates
- plclear(3)
- Clear current page
- plcol0(3)
- Set color, map0
- plcol1(3)
- Set color, map1
- plcombine(3)
- polylist two polylists into one
- plconsol(3)
- polylist consolidator
- plcont(3)
- Contour plot
- plcpstrm(3)
- Copy state parameters from reference stream to current stream
- pldes(1)
-
- plend(3)
- End plotting session
- plend1(3)
- End plotting session for current stream
- plenv(3)
- Set up standard window/draw box
- plenv0(3)
- Same as plenv but if in multiplot mode does not advance subpage, instead clears it
- pleop(3)
- Eject current page
- plerrx(3)
- Draw x error bar
- plerry(3)
- Draw y error bar
- plessc(1)
- manual page for plessc
- plex(1)
- Pascal Lex lexical analyzer generator
- plfamadv(3)
- Advance to next family file on next new page
- plfill(3)
- Draw filled polygon
- plfill3(3)
- Draw filled polygon in 3D
- plflush(3)
- Flushes output stream
- plfont(3)
- Set char font
- plfontld(3)
- Load char font
- plfsurf3d(3)
- Plot shaded 3-d surface plot
- plgchr(3)
- char default height/current height
- plgcol0(3)
- Returns 8-bit RGB values for given color from color map0
- plgcol0a(3)
- Returns 8-bit RGB values/double alpha value for given color from color map0
- plgcolbg(3)
- Returns background color by 8-bit RGB value
- plgcolbga(3)
- Returns background color by 8-bit RGB value/double alpha value
- plgcompression(3)
- current device-compression setting
- plgdev(3)
- current device name
- plgdidev(3)
- parameters that define current device-space window
- plgdiori(3)
- plot orientation
- plgdiplt(3)
- parameters that define current plot-space window
- plgfam(3)
- family file parameters
- plgfci(3)
- FCI
- plgfnam(3)
- output file name
- plgfont(3)
- family, style and weight of current font
- plglevel(3)
- run level
- plgpage(3)
- page parameters
- plgra(3)
- Switch to graphics screen
- plgradient(3)
- Draw linear gradient inside polygon
- plgriddata(3)
- Grid data from irregularly sampled data
- plgspa(3)
- current subpage parameters
- plgstrm(3)
- current stream number
- plgver(3)
- current library version number
- plgvpd(3)
- viewport limits in normalized device coordinates
- plgvpw(3)
- viewport limits in world coordinates
- plgxax(3)
- x axis parameters
- plgyax(3)
- y axis parameters
- plgzax(3)
- z axis parameters
- plhist(3)
- Plot histogram from unbinned data
- plhlsrgb(3)
- Convert HLS color to RGB
- plimage(3)
- Plot 2D matrix using color map1 with automatic colour adjustment
- plimagefr(3)
- Plot 2D matrix using color map1
- plinit(3)
- Initialize PLplot
- plink(1)
- PuTTY link, network connection tool
- plipconfig(8)
- fine tune PLIP device parameters
- plist(1)
- contents of output files generated by AS
- pljoin(3)
- Draw line between two points
- pllab(3)
- Simple routine to write labels
- plld(1)
- Create SWI-Prolog embedded executable
- pllegend(3)
- Create discrete annotated legend using boxes, lines,/lines of symbols
- pllightsource(3)
- Sets 3D position of light source
- plline(3)
- Draw line
- plline3(3)
- Draw line in 3 space
- pllsty(3)
- Select line style
- plmake(1)
- Experimental make utility based on Makefile::Parser
- plmap(3)
- Plot continental outline in world coordinates
- plmeridians(3)
- Plot latitude/longitude lines
- plmesh(3)
- Plot surface mesh
- plmeshc(3)
- Magnitude colored plot surface mesh with contour
- plmkstrm(3)
- Creates new stream/makes it default
- plmpower(8)
- control Insteon/X10 devices via SmartLabs PLM 2412S
- plmtex(3)
- text relative to viewport boundaries
- plmtex3(3)
- text relative to viewport boundaries in 3D plots
- plot(1)
- translate GNU metafiles to other graphics formats
- plot3d(3)
- Plot 3-d surface plot
- plot3dc(3)
- Magnitude colored plot surface with contour
- plotfont(1)
- produce char maps of fonts supported by plotting utilities
- plowdel(1)
- Delete file-sharing download links
- plowdown(1)
- Simple download manager for file-sharing
- plowlist(1)
- file-sharing web-folders
- plowprobe(1)
- Gather info from file-sharing
- plowshare.conf(5)
- config file for Plowshare
- plowup(1)
- Simple upload manager for file-sharing
- plp(3)
- Perl in HTML pages
- plparseopts(3)
- Parse arguments
- plpat(3)
- Set area fill pattern
- plpath(3)
- Draw line between two points, accounting for coordinate transforms
- plplot(3)
- Advanced 2D/3D scientific plotting library
- plpoin(3)
- Plots char at specified points
- plpoin3(3)
- Plots char at specified points in 3 space
- plpoly3(3)
- Draw polygon in 3 space
- plprec(3)
- Set precision in numeric labels
- plpsty(3)
- Select area fill pattern
- plptex(3)
- text inside viewport
- plptex3(3)
- text inside viewport of 3D plot
- plrandd(3)
- Random number generator returning real random number in range [0,1]
- plrc(1)
- SWI-Prolog resource archiver
- plreplot(3)
- Replays contents of plot buffer to current device/file
- plrgbhls(3)
- Convert RGB color to HLS
- pls(1)
- directory contents
- plschr(3)
- Set char size
- plscmap0(3)
- Set color map0 colors by 8-bit RGB values
- plscmap0a(3)
- Set color map0 colors by 8-bit RGB values/double alpha value
- plscmap0n(3)
- Set number of colors in color map0
- plscmap1(3)
- Set color map1 colors using 8-bit RGB values
- plscmap1a(3)
- Set color map1 colors using 8-bit RGB values/double alpha values
- plscmap1l(3)
- Set color map1 colors using piece-wise linear relationship
- plscmap1la(3)
- Set color map1 colors using piece-wise linear relationship
- plscmap1n(3)
- Set number of colors in color map1
- plscol0(3)
- Set given color from color map0 by 8 bit RGB value
- plscol0a(3)
- Set given color from color map0 by 8 bit RGB value/double alpha value
- plscolbg(3)
- Set background color by 8-bit RGB value
- plscolbga(3)
- Set background color by 8-bit RGB value/double alpha value
- plscolor(3)
- Used to globally turn color output on/off
- plscompression(3)
- Set device-compression level
- plsdev(3)
- Set device name
- plsdidev(3)
- Set parameters that define current device-space window
- plsdimap(3)
- Set up transformation from metafile coordinates
- plsdiori(3)
- Set plot orientation
- plsdiplt(3)
- Set parameters that define current plot-space window
- plsdiplz(3)
- Set parameters incrementally that define current plot-space window
- plseed(3)
- Set seed for internal random number generator
- plserver(1)
- PLplot graphics server
- plsesc(3)
- Set escape char for text strings
- plsetopt(3)
- Set any option
- plsfam(3)
- Set family file parameters
- plsfci(3)
- Set FCI
- plsfnam(3)
- Set output file name
- plsfont(3)
- Set family, style and weight of current font
- plshade(3)
- Shade individual region on basis of value
- plshade1(3)
- Shade individual region on basis of value
- plshades(3)
- Shade regions on basis of value
- plslabelfunc(3)
- Assign function to use for generating custom axis labels
- plsmaj(3)
- Set length of major ticks
- plsmem(3)
- Set memory area to be plotted
- plsmema(3)
- Set memory area to be plotted
- plsmin(3)
- Set length of minor ticks
- plsori(3)
- Set orientation
- plspage(3)
- Set page parameters
- plspal0(3)
- Set colors for color table 0 from cmap0 file
- plspal1(3)
- Set colors for color table 1 from cmap1 file
- plspause(3)
- Set pause status
- plsstrm(3)
- Set current output stream
- plssub(3)
- Set number of subpages in x/y
- plssym(3)
- Set symbol size
- plstar(3)
- Initialization
- plstart(3)
- Initialization
- plstransform(3)
- Set global coordinate transform function
- plstripa(3)
- Add point to stripchart
- plstripc(3)
- Create 4-pen stripchart
- plstripd(3)
- Deletes/releases memory used by stripchart
- plstyl(3)
- Set line style
- plsurf3d(3)
- Plot shaded 3-d surface plot
- plsvect(3)
- Set arrow style for vector plots
- plsvpa(3)
- Specify viewport in absolute coordinates
- plsxax(3)
- Set x axis parameters
- plsyax(3)
- Set y axis parameters
- plsym(3)
- Plots symbol at specified points
- plszax(3)
- Set z axis parameters
- pltcl(1)
- Tcl interface to PLplot
- pltek(1)
- review Tektronix vector file
- pltext(3)
- Switch to text screen
- pltimefmt(3)
- Set format for date/time labels
- pltotf(1)
- convert property list files to TeX font metric format
- plucene(3)
- Perl port of Lucene search engine
- plugctl(1)
- get/set any MPR/PCR register value
- pluginviewer(8)
- loadable SASL plugins/their properties
- plugreport(1)
- read all MPR/PCR registers from all devices/report them
- plvasp(3)
- Specify viewport using aspect ratio only
- plvect(3)
- Vector plot
- plvpas(3)
- Specify viewport using coordinates/aspect ratio
- plvpor(3)
- Specify viewport using coordinates
- plvsta(3)
- Select standard viewport
- plw3d(3)
- Set up window for 3-d plotting
- plwid(3)
- Set pen width
- plwind(3)
- Specify world coordinates of viewport boundaries
- plxload(1)
- what files perl program loads at compile time
- plxormod(3)
- Enter/leave xor mode
- plymouth(8)
- graphical boot system/logger
- plymouth_selinux(8)
- Security Enhanced Policy for plymouth processes
- plymouthd_selinux(8)
- Security Enhanced Policy for plymouthd processes
- pm(1)
- power on/off nodes
- pm-action(8)
- Suspend/Hibernate your computer
- pm-hibernate(8)
- Suspend/Hibernate your computer
- pm-is-supported(1)
- Test whether suspend/hibernate is supported
- pm-pmu(1)
- suspend computer on machines using Macintosh-style PMU
- pm-pmu(8)
- suspend computer on machines using Macintosh-style PMU
- pm-powersave(8)
- Put your computer into low power mode
- pm-suspend(8)
- Suspend/Hibernate your computer
- pm-suspend-hybrid(8)
- Suspend/Hibernate your computer
- pm_which(1)
- find installed modules
- pmaddprofile(3)
- add instance to current PMAPI instance profile
- pmaf(3)
- event queue services for periodic asynchronous callbacks
- pmafm(1)
- Performance Co-Pilot archive folio manager
- pmafm(3)
- record mode support for PMAPI clients
- pmake(1)
- perl 'make' replacement
- pmall(1)
- all installed versions/descs
- pman(1)
- module's man page
- pman(3)
- graphical process manager
- pmap(1)
- report memory map of process
- pmap_dump(8)
- print list of all registered RPC programs
- pmap_getmaps(3)
- library routines for remote procedure calls
- pmap_getport(3)
- library routines for remote procedure calls
- pmap_rmtcall(3)
- library routines for remote procedure calls
- pmap_set(3)
- library routines for remote procedure calls
- pmap_set(8)
- set list of registered RPC programs
- pmap_unset(3)
- library routines for remote procedure calls
- pmapi(3)
- introduction to Performance Metrics Application Programming Interface
- pmatomstr(3)
- convert performance metric value into string
- pmc(8)
- PTP management client
- pmcat(1)
- page through module file
- pmcd(1)
- performance metrics collector daemon
- pmcd_wait(1)
- wait for PMCD to accept client connections
- pmchart(1)
- strip chart tool for Performance Co-Pilot
- pmclient(1)
- simple performance metrics client
- pmcollectl(1)
- collect data that describes current system status
- pmconfig(1)
- Performance Co-Pilot config parameters
- pmconfirm(1)
- general purpose dialog box
- pmconnectlogger(3)
- connect to performance metrics logger control port
- pmcontextchangestate(3)
- connect to PMCD
- pmcontextconnectto(3)
- connect to PMCD
- pmcontextundef(3)
- change current PMAPI context
- pmcontrollog(3)
- enable, disable or enquire about logging of performance metrics
- pmconverttime(3)
- convert tm structure to timeval structure
- pmconvscale(3)
- rescale performance metric value
- pmcpp(1)
- simple preprocessor for Performance Co-Pilot
- pmctime(3)
- format date/time for reporting timezone
- pmda(3)
- introduction to Performance Metrics Domain Agent support library
- pmdabash(1)
- Bourne-Again SHell trace performance metrics domain agent
- pmdabonding(1)
- bonded interface performance metrics domain agent
- pmdacache(3)
- manage cache of instance domain info for PMDA
- pmdacachelookup(3)
- manage cache of instance domain info for PMDA
- pmdacachelookupkey(3)
- manage cache of instance domain info for PMDA
- pmdacachelookupname(3)
- manage cache of instance domain info for PMDA
- pmdacacheop(3)
- manage cache of instance domain info for PMDA
- pmdacachepurge(3)
- manage cache of instance domain info for PMDA
- pmdacachestore(3)
- manage cache of instance domain info for PMDA
- pmdacachestorekey(3)
- manage cache of instance domain info for PMDA
- pmdachildren(3)
- translate PMID to set of dynamic performance metric names
- pmdacisco(1)
- Cisco router performance metrics domain agent
- pmdaclosehelp(3)
- help text support for PMDA
- pmdaconnect(3)
- establish connection between daemon PMDA/PMCD
- pmdadaemon(3)
- initialize PMDA to run as daemon
- pmdadbping(1)
- database response time/availability PMDA
- pmdadesc(3)
- description of metric from PMDA
- pmdadso(3)
- initialize PMDA to run as DSO
- pmdaelasticsearch(1)
- elasticsearch performance metrics domain agent
- pmdaeventaddmissedrecord(3)
- utilities for PMDAs to build packed arrays of event records
- pmdaeventaddparam(3)
- utilities for PMDAs to build packed arrays of event records
- pmdaeventaddrecord(3)
- utilities for PMDAs to build packed arrays of event records
- pmdaeventarray(3)
- utilities for PMDAs to build packed arrays of event records
- pmdaeventclient(3)
- client context tracking interfaces for event queues
- pmdaeventclients(3)
- client context tracking interfaces for event queues
- pmdaeventendclient(3)
- client context tracking interfaces for event queues
- pmdaeventgetaddr(3)
- utilities for PMDAs to build packed arrays of event records
- pmdaeventnewactivequeue(3)
- utilities for PMDAs managing event queues
- pmdaeventnewarray(3)
- utilities for PMDAs to build packed arrays of event records
- pmdaeventnewclient(3)
- client context tracking interfaces for event queues
- pmdaeventnewqueue(3)
- utilities for PMDAs managing event queues
- pmdaeventqueue(3)
- utilities for PMDAs managing event queues
- pmdaeventqueueappend(3)
- utilities for PMDAs managing event queues
- pmdaeventqueuebytes(3)
- utilities for PMDAs managing event queues
- pmdaeventqueueclients(3)
- utilities for PMDAs managing event queues
- pmdaeventqueuecounter(3)
- utilities for PMDAs managing event queues
- pmdaeventqueuehandle(3)
- utilities for PMDAs managing event queues
- pmdaeventqueuememory(3)
- utilities for PMDAs managing event queues
- pmdaeventqueuerecords(3)
- utilities for PMDAs managing event queues
- pmdaeventreleasearray(3)
- utilities for PMDAs to build packed arrays of event records
- pmdaeventresetarray(3)
- utilities for PMDAs to build packed arrays of event records
- pmdafetch(3)
- fill pmResult structure with requested metric values
- pmdagethelp(3)
- help text support for PMDA
- pmdagetindomhelp(3)
- help text support for PMDA
- pmdagetopt(3)
- options from argument vector, trapping generic PMDA options
- pmdagpsd(1)
- gpsd performance metrics domain agent
- pmdahelp(3)
- help text support for PMDA
- pmdainit(3)
- initialize PMDA
- pmdainstance(3)
- return instance descriptions for PMDA
- pmdakvm(1)
- virtualisation performance metrics domain agent
- pmdamailq(1)
- mail queue performance metrics domain agent
- pmdamain(3)
- generic PDU processing for PMDA
- pmdamainloop(3)
- generic PDU processing for PMDA
- pmdamainloopfreeresultcallback(3)
- generic PDU processing for PMDA
- pmdamemcache(1)
- memcache performance metrics domain agent
- pmdamysql(1)
- MySQL database PMDA
- pmdaname(3)
- translate PMID to set of dynamic performance metric names
- pmdanamed(1)
- BIND PMDA
- pmdanetfilter(1)
- netfilter IP connection tracking performance metrics domain agent
- pmdanews(1)
- sample Usenet news performance metrics domain agent
- pmdaopenhelp(3)
- help text support for PMDA
- pmdaopenlog(3)
- redirect stderr to logfile
- pmdapdns(1)
- PowerDNS performance metrics domain agent
- pmdapmid(3)
- translate dynamic performance metric name into PMID
- pmdapostfix(1)
- Postfix performance metrics domain agent
- pmdapostgresql(1)
- PostgreSQL database PMDA
- pmdaprofile(3)
- update instance profile for PMDA in preparation for next fetch from PMCD
- pmdarsyslog(1)
- rsyslog PMDA
- pmdasamba(1)
- virtualisation performance metrics domain agent
- pmdasample(1)
- sample performance metrics domain agent
- pmdasendmail(1)
- sendmail performance metrics domain agent
- pmdasetcheckcallback(3)
- generic PDU processing for PMDA
- pmdasetdonecallback(3)
- generic PDU processing for PMDA
- pmdasetfetchcallback(3)
- fill pmResult structure with requested metric values
- pmdasetresultcallback(3)
- generic PDU processing for PMDA
- pmdashping(1)
- shell-ping performance metrics domain agent
- pmdasimple(1)
- simple performance metrics domain agent
- pmdasnmp(1)
- Gateway from SNMP to PCP
- pmdastore(3)
- store value into metric for PMDA
- pmdasummary(1)
- summary performance metrics domain agent
- pmdasystemtap(1)
- Systemtap performance metrics domain agent
- pmdate(1)
- offset date
- pmdatext(3)
- extract metric help text for PMDA
- pmdatrace(1)
- application-level transaction performance metrics domain agent
- pmdatrace(3)
- application-level performance instrumentation services
- pmdatrivial(1)
- trivial performance metrics domain agent
- pmdatxmon(1)
- txmon performance metrics domain agent
- pmdavmware(1)
- VMware performance metrics domain agent
- pmdaweblog(1)
- performance metrics domain agent for Web server logs
- pmdazimbra(1)
- Zimbra Collaboration Suite PMDA
- pmdbg(1)
- translate Performance Co-Pilot debug control flags
- pmdelprofile(3)
- delete instance from current PMAPI instance profile
- pmderivederrstr(3)
- return error message from failure to parse derived metric definition
- pmdesc(1)
- print out version/whatis description of perl modules
- pmdestroycontext(3)
- destroy PMAPI context
- pmdirs(1)
- print out module directories
- pmdumplog(1)
- dump internal details of performance metrics archive log
- pmdumptext(1)
- dump performance metrics to ASCII table
- pmdupcontext(3)
- duplicate PMAPI context
- pmerr(1)
- translate Performance Co-Pilot error codes into error messages
- pmerrstr(3)
- convert PMAPI error code into string
- pmeth(1)
- Perl class's methods
- pmevent(1)
- report event record details
- pmeventflagsstr(3)
- convert event record flags value into string
- pmexp(1)
- module's exports
- pmextractvalue(3)
- extract performance metric value from pmResult structure
- pmfetch(3)
- performance metric values
- pmfetcharchive(3)
- performance metrics directly from archive log
- pmflush(3)
- print formatted output in window/to standard error
- pmfreeeventresult(3)
- release storage allocated for unpacked event records
- pmfreemetricspec(3)
- uniform metric specification parser
- pmfreeprofile(3)
- free PMAPI instance profile
- pmfreeresult(3)
- release storage allocated for performance metrics values
- pmfunc(1)
- cat out function from module
- pmgenmap(1)
- make C code to simplify handling of performance metrics
- pmgetarchiveend(3)
- locate logical end of file for archive log
- pmgetarchivelabel(3)
- fetch label record from performance metrics archive log
- pmgetchildren(3)
- return descendent nodes of PMNS node
- pmgetchildrenstatus(3)
- return descendent nodes of PMNS node/their respective status
- pmgetconfig(3)
- return Performance Co-Pilot config variable
- pmgetcontextfd(3)
- file descriptor associated with PMAPI context
- pmgetcontexthostname(3)
- return hostname associated with Performance Co-Pilot context identifier
- pmgetcontexttimeout(3)
- file descriptor associated with PMAPI context
- pmgetindom(3)
- instance identifiers for performance metrics instance domain
- pmgetindomarchive(3)
- instance identifiers for performance metrics instance domain
- pmgetpmnslocation(3)
- determine location of currently used PMNS
- pmhostname(1)
- report hostname
- pmiaddinstance(3)
- add element to instance domain in LOGIMPORT context
- pmiaddmetric(3)
- add new metric definition to LOGIMPORT context
- pmidstr(3)
- convert performance metric identifier into string
- pmie(1)
- inference engine for performance metrics
- pmie2col(1)
- convert pmie output to multi-column format
- pmie_check(1)
- administration of Performance Co-Pilot inference engine
- pmie_daily(1)
- administration of Performance Co-Pilot inference engine
- pmieconf(1)
- display/set configurable pmie rule variables
- pmieconf(4)
- generalized pmie rules/customizations
- pmiend(3)
- finish up LOGIMPORT archive
- pmierrstr(3)
- convert LOGIMPORT error code into string
- pmiestatus(1)
- info from pmie stats file
- pmigethandle(3)
- define handle for metric-instance pair
- pmindomstr(3)
- convert performance metric instance domain identifier into string
- pminfo(1)
- performance metrics
- pminst(1)
- find modules whose names match this pattern
- pmiputresult(3)
- add data record to LOGIMPORT archive
- pmiputvalue(3)
- add value for metric-instance pair
- pmiputvaluehandle(3)
- add value for metric-instance pair via handle
- pmisethostname(3)
- set source host name for LOGIMPORT archive
- pmisettimezone(3)
- set source timezone for LOGIMPORT archive
- pmistart(3)
- establish new LOGIMPORT context
- pmiunits(3)
- construct core metric data structures
- pmiusecontext(3)
- change LOGIMPORT context
- pmiwrite(3)
- flush data to LOGIMPORT archive
- pmkdir(1)
- make directory
- pmkpasswd(1)
- make crypted passwords
- pmlc(1)
- configure active Performance Co-Pilot pmlogger interactively
- pmload(1)
- what files given module loads at compile time
- pmloadasciinamespace(3)
- establish local PMNS for application
- pmloadderivedconfig(3)
- load derived metric definitions from file
- pmloadnamespace(3)
- load local PMNS for application
- pmlocalpmda(3)
- change table of DSO PMDAs for PM_CONTEXT_LOCAL contexts
- pmlocaltime(3)
- convert date/time for reporting timezone
- pmlock(1)
- simple file-based mutex
- pmlogcheck(1)
- checks for invalid data in PCP archive
- pmlogconf(1)
- create/edit pmlogger config file
- pmlogextract(1)
- reduce, extract, concatenate and merge Performance Co-Pilot archives
- pmlogger(1)
- create archive log for performance metrics
- pmlogger_check(1)
- administration of Performance Co-Pilot archive log files
- pmlogger_daily(1)
- administration of Performance Co-Pilot archive log files
- pmlogger_merge(1)
- administration of Performance Co-Pilot archive log files
- pmloglabel(1)
- check/repair performance metrics archive label
- pmlogreduce(1)
- temporal reduction of Performance Co-Pilot archives
- pmlogrewrite(1)
- rewrite Performance Co-Pilot archives
- pmlogsummary(1)
- calculate averages of metrics stored in PCP archive
- pmlookupdesc(3)
- obtain description for performance metric
- pmlookupindom(3)
- translate instance name into instance identifier
- pmlookupindomarchive(3)
- translate instance name into instance identifier
- pmlookupindomtext(3)
- return text describing performance metrics instance domain
- pmlookupipc(3)
- IPC version infrastructure support
- pmlookupname(3)
- translate performance metric names into PMIDs
- pmlookuptext(3)
- return text describing performance metric
- pmloop(3)
- PMAPI functions for implementing application main loop
- pmloopmain(3)
- PMAPI functions for implementing application main loop
- pmloopregisterchild(3)
- PMAPI functions for implementing application main loop
- pmloopregisteridle(3)
- PMAPI functions for implementing application main loop
- pmloopregisterinput(3)
- PMAPI functions for implementing application main loop
- pmloopregistersignal(3)
- PMAPI functions for implementing application main loop
- pmloopregistertimeout(3)
- PMAPI functions for implementing application main loop
- pmloopstop(3)
- PMAPI functions for implementing application main loop
- pmloopunregisterchild(3)
- PMAPI functions for implementing application main loop
- pmloopunregisteridle(3)
- PMAPI functions for implementing application main loop
- pmloopunregisterinput(3)
- PMAPI functions for implementing application main loop
- pmloopunregistersignal(3)
- PMAPI functions for implementing application main loop
- pmloopunregistertimeout(3)
- PMAPI functions for implementing application main loop
- pmls(1)
- long list module path
- pmmessage(1)
- general purpose dialog box
- pmmktime(3)
- convert tm structure to calendar time
- pmnameall(3)
- translate PMID to set of performance metric names
- pmnameid(3)
- translate PMID to performance metric name
- pmnameindom(3)
- translate instance identifier into instance name
- pmnameindomarchive(3)
- translate instance identifier into instance name
- pmnewcontext(3)
- establish new PMAPI context
- pmnewcontextzone(3)
- establish reporting timezone based on PMAPI context
- pmnewlog(1)
- stop/restart archive logging for PCP performance metrics
- pmnewzone(3)
- establish reporting timezone
- pmns(4)
- performance metrics name space
- pmnsadd(1)
- add new names to Performance Co-Pilot PMNS
- pmnscomp(1)
- compile ASCII performance metrics namespace into binary format
- pmnsdel(1)
- delete subtree of names from Performance Co-Pilot PMNS
- pmnsmerge(1)
- merge multiple versions of Performance Co-Pilot PMNS
- pmnumberstr(3)
- fixed width output format for numbers
- pmopenlog(3)
- create log file for diagnostics/debug output
- pmount(1)
- mount arbitrary hotpluggable devices as normal user
- pmparsectime(3)
- convert ctime string to tm structure
- pmparsedebug(3)
- convert list of debug flags into integer
- pmparsehostspec(3)
- uniform host specification parser
- pmparseinterval(3)
- convert interval string to timeval structure
- pmparsemetricspec(3)
- uniform metric specification parser
- pmparsetime(3)
- parse time point specification
- pmparsetimewindow(3)
- parse time window arguments
- pmpath(1)
- full path to perl module
- pmpost(1)
- append messages to Performance Co-Pilot notice board
- pmprintf(3)
- print formatted output in window/to standard error
- pmprintvalue(3)
- print performance metric value
- pmprobe(1)
- lightweight probe for performance metrics
- pmproxy(1)
- proxy for performance metrics collector daemon
- pmquery(1)
- general purpose dialog box
- pmreceivedesc(3)
- obtain description for performance metric
- pmreceivefetch(3)
- performance metric values
- pmreceiveindom(3)
- instance identifiers for performance metrics instance domain
- pmreceiveindominst(3)
- translate instance name into instance identifier
- pmreceiveindomname(3)
- translate instance identifier into instance name
- pmreceivenameall(3)
- translate PMID to set of performance metric names
- pmreceivenameid(3)
- translate PMID to performance metric name
- pmreceivenames(3)
- translate performance metric names into PMIDs
- pmreceivenamesofchildren(3)
- return descendent nodes of PMNS node
- pmreceivestore(3)
- modify values of performance metrics
- pmreceivetext(3)
- return text describing performance metric
- pmreceivetraversepmns(3)
- traverse performance metrics name space
- pmreconnectcontext(3)
- reconnect to PMAPI context
- pmrecordaddhost(3)
- record mode support for PMAPI clients
- pmrecordcontrol(3)
- record mode support for PMAPI clients
- pmrecordsetup(3)
- record mode support for PMAPI clients
- pmregisterderived(3)
- register derived metric name/definition
- pmrequestdesc(3)
- obtain description for performance metric
- pmrequestfetch(3)
- performance metric values
- pmrequestindom(3)
- instance identifiers for performance metrics instance domain
- pmrequestindominst(3)
- translate instance name into instance identifier
- pmrequestindomname(3)
- translate instance identifier into instance name
- pmrequestindomtext(3)
- return text describing performance metrics instance domain
- pmrequestnameall(3)
- translate PMID to set of performance metric names
- pmrequestnameid(3)
- translate PMID to performance metric name
- pmrequestnames(3)
- translate performance metric names into PMIDs
- pmrequestnamesofchildren(3)
- return descendent nodes of PMNS node
- pmrequeststore(3)
- modify values of performance metrics
- pmrequesttext(3)
- return text describing performance metric
- pmrequesttraversepmns(3)
- traverse performance metrics name space
- pmsetmode(3)
- set collection time parameters for current PMAPI context
- pmsignal(1)
- send signal to one/more processes
- pmsleep(1)
- portable subsecond-capable sleep
- pmsnap(1)
- make performance summary snapshot images
- pmsocks(1)
- shell wrapper for performance monitoring across firewalls
- pmsortinstances(3)
- sort performance metric values on instance identifier
- pmspeclocalpmda(3)
- process argument for table of DSO PMDAs
- pmstat(1)
- high-level system performance overview
- pmstore(1)
- modify performance metric values
- pmstore(3)
- modify values of performance metrics
- pmtime(1)
- time control server for Performance Co-Pilot
- pmtime(3)
- time control functions for synchronizing archive position/update interval between one/more applications
- pmtimerecv(3)
- time control functions for synchronizing archive position/update interval between one/more applications
- pmtrace(1)
- performance instrumentation
- pmtraceabort(3)
- application-level performance instrumentation services
- pmtracebegin(3)
- application-level performance instrumentation services
- pmtracecounter(3)
- application-level performance instrumentation services
- pmtraceend(3)
- application-level performance instrumentation services
- pmtraceerrstr(3)
- application-level performance instrumentation services
- pmtraceobs(3)
- application-level performance instrumentation services
- pmtracepoint(3)
- application-level performance instrumentation services
- pmtracestate(3)
- application-level performance instrumentation services
- pmtraversepmns(3)
- traverse performance metrics name space
- pmtrimnamespace(3)
- prune performance metrics name space
- pmtypestr(3)
- convert performance metric type into string
- pmumps(1)
- Stand alone ionterpreter for Language::Mumps
- pmunitsstr(3)
- convert performance metric's units into string
- pmunloadnamespace(3)
- unload local performance metrics name space for application
- pmunpackeventrecords(3)
- unpack event records
- pmusecontext(3)
- change current PMAPI context
- pmusezone(3)
- re-establish reporting timezone
- pmv(1)
- move files
- pmval(1)
- performance metrics value dumper
- pmvers(1)
- print out module's version
- pmwhichcontext(3)
- identify current PMAPI context
- pmwhichzone(3)
- return current reporting timezone
- pnee(1)
-
- png(5)
- Portable Network Graphics format
- png2ico(1)
- convert .PNG file to Windows .ICO icon resource
- png2pat(1)
- Converts image file from PNG to PAT format
- png2swf(1)
- Takes number of png files and converts them to swf movie, one picture per frame
- png2yuv(1)
- Convert PNG images to YUV4MPEG stream format
- pngtoexr(1)
- convert PNG image to OpenEXR format
- pngtopam(1)
- convert PNG image into Netpbm image
- pngtopnm(1)
- convert PNG image into PNM image
- pnm(5)
- Netpbm superformat
- pnm2ppa(1)
- convert portable anymap images to HP's PPA printer format
- pnmalias(1)
- antialias PNM image
- pnmarith(1)
- perform arithmetic on two PNM images
- pnmcat(1)
- concatenate Netpbm images
- pnmcolormap(1)
- create quantization color map for Netpbm image
- pnmcomp(1)
- composite two PNM images together
- pnmconvol(1)
- general MxN convolution on Netpbm image
- pnmcrop(1)
- crop PNM image
- pnmcut(1)
- replaced by pamcut
- pnmdepth(1)
- change maxval in PNM image
- pnmenlarge(1)
- replaced by pamenlarge
- pnmfile(1)
- replaced by pamfile
- pnmflip(1)
-
- pnmgamma(1)
- perform gamma adjustment on PNM image
- pnmhisteq(1)
- histogram equalize PNM image
- pnmindex(1)
- build visual index of bunch of PNM images
- pnminterp(1)
- replaced by pamstretch
- pnminvert(1)
- invert PNM image
- pnmmargin(1)
- add borders to PNM image
- pnmmercator(1)
- transform worldmap from rectangular projection to Mercator projection/vice-versa
- pnmmontage(1)
- create montage of PNM images
- pnmnlfilt(1)
- non-linear filters: smooth, alpha trim mean, optimal estimation smoothing, edge enhancement
- pnmnoraw(1)
- replaced by pnmtoplainpnm
- pnmnorm(1)
- normalize contrast in Netbpm image
- pnmpad(1)
- add borders to PNM image
- pnmpaste(1)
- paste rectangle into PNM image
- pnmpsnr(1)
- compute diff between two images
- pnmquant(1)
- quantize colors in Netpbm image to smaller set
- pnmremap(1)
- replace colors in PNM image with colors from another set
- pnmrotate(1)
- rotate PNM image by some angle
- pnmscale(1)
- replaced by pamscale
- pnmscalefixed(1)
- scale PNM file quickly
- pnmshear(1)
- shear PNM image by specified angle
- pnmsmooth(1)
- smooth out image
- pnmsplit(1)
- split multi-image PNM file into multiple single-image
- pnmstitch(1)
- stitch together two panoramic photographs
- pnmtile(1)
- replicate image to fill specified region
- pnmtoddif(1)
- Convert PNM image to DDIF format
- pnmtofiasco(1)
- Convert PNM file to FIASCO compressed file
- pnmtofits(1)
- replaced by pamtofits
- pnmtojbig(1)
- PNM to JBIG file converter
- pnmtojpeg(1)
- convert PNM image to JFIF image
- pnmtopalm(1)
- convert PNM image to Palm Bitmap
- pnmtopclxl(1)
- convert PNM image to HP LaserJet PCL XL printer stream
- pnmtoplainpnm(1)
- replaced by pnmtopnm
- pnmtopng(1)
- convert PNM image to PNG
- pnmtopnm(1)
- copy PNM image
- pnmtops(1)
- convert PNM image to PostScript
- pnmtorast(1)
- convert PPM into Sun rasterfile
- pnmtorle(1)
- convert Netpbm image file into RLE image file
- pnmtosgi(1)
- convert PNM image to SGI image file
- pnmtosir(1)
- convert PNM image into Solitaire format
- pnmtotiff(1)
- replaced by pamtotiff
- pnmtotiffcmyk(1)
- convert Netpbm image into CMYK encoded TIFF file
- pnmtoxwd(1)
- convert PNM into X11 window dump
- pnmtoy4m(1)
- Convert PNM/PAM images to YUV4MPEG2 stream
- pnoutrefresh(3)
- create/display curses pads
- po2csv(1)
- convert Gettext PO localization files to Comma-Separated Value files
- po2html(1)
- convert Gettext PO localization files to HTML files
- po2ini(1)
- convert Gettext PO localization files to .ini files
- po2json(1)
- Convert Gettext PO localization files to JSON files
- po2moz(1)
- convert Gettext PO localization files to Mozilla .dtd/.properties files
- po2oo(1)
- convert Gettext PO localization files to OpenOffice.org localization file
- po2php(1)
- convert Gettext PO localization files to PHP localization files
- po2prop(1)
- convert Gettext PO localization files to Java/Mozilla .properties files
- po2rc(1)
- Convert Gettext PO localization files back to Windows Resource files
- po2symb(1)
- convert Gettext PO localization files to Symbian translation files
- po2tiki(1)
- Convert .po files to TikiWiki's language.php files
- po2tmx(1)
- convert Gettext PO localization files to TMX file
- po2ts(1)
- convert Gettext PO localization files to Qt Linguist files
- po2txt(1)
- convert Gettext PO localization files to plain text files
- po2web2py(1)
- convert GNU/gettext PO files to web2py translation dictionaries
- po2wordfast(1)
- convert Gettext PO localization files to Wordfast translation memory file
- po2xliff(1)
- convert Gettext PO localization files to XLIFF localization files
- po2xml(1)
- Translates DocBook XML file using PO file
- po4a(1)
- update both PO files/translated documents in one shot
- po4a(7)
- framework to translate documentation/other materials
- po4a-build(1)
- build translated documentation
- po4a-build.conf(5)
- config file for building translated content
- po4a-gettextize(1)
- convert original file to PO file
- po4a-normalize(1)
- normalize documentation file by parsing it in po4a, and writing it back
- po4a-runtime(7)
- po4a/runtime gettext translation without Autotools
- po4a-translate(1)
- convert PO file back to documentation format
- po4a-updatepo(1)
- update translation of documentation
- po4aman-display-po(1)
- translated man page according to PO
- po4apod-display-po(1)
- man display of translated POD file according to PO
- poclean(1)
- Produces clean file from unclean file by stripping out tw4win indicators
- pocompile(1)
- Compile XLIFF/Gettext PO localization files into Gettext MO files
- poconflicts(1)
- Conflict finder for Gettext PO localization files
- pod2docbook(1)
- Convert POD data to DocBook SGML
- pod2html(1)
- convert .pod files to .html files
- pod2latex(1)
- convert pod documentation to latex format
- pod2man(1)
- Convert POD data to formatted *roff input
- pod2readme(1)
- convert POD to README file
- pod2test(1)
- Convert embedded tests/code examples to .t files
- pod2text(1)
- Convert POD data to formatted ASCII text
- pod2usage(1)
- print usage messages from embedded pod docs in files
- pod2wiki(1)
- utility to convert Pod documents to Wiki format
- pod2xhtml(1)
- convert .pod files to .xhtml files
- pod2xml(1)
- convert POD to XML
- podchecker(1)
- check syntax of POD format documentation files
- podebug(1)
- Insert debug messages into XLIFF/Gettext PO localization files
- podgrep(1)
- grep in pod sections only
- podlint(1)
- check POD for correctness using Pod::POM
- podofobox(1)
- modify colors in PDF file
- podofocountpages(1)
- count number of pages in pdf file
- podofocrop(1)
- crop all pages
- podofoencrypt(1)
- encrypt PDF files/set PDF security settings
- podofoimg2pdf(1)
- Convert images to PDF files
- podofoimgextract(1)
- Extract all images from PDF file
- podofoimpose(1)
- powerful PDF imposition tool
- podofoincrementalupdates(1)
- Provides info about incremental updates in PDF files
- podofomerge(1)
- merge several PDF files
- podofopages(1)
- move/delete pages in PDF document
- podofopdfinfo(1)
- provide info about PDF file
- podofotxt2pdf(1)
- convert plain text files into PDF files
- podofotxtextract(1)
- Extract all text from PDF file
- podofouncompress(1)
- Uncompress PDF files
- podofoxmp(1)
- Modify/extract XMP info from PDF file
- podpath(1)
- print path to pod
- pods(1)
- print out all pod paths
- podselect(1)
- print selected sections of pod documentation on stdout
- podsleuth_selinux(8)
- Security Enhanced Policy for podsleuth processes
- podtoc(1)
- outline of pods
- podviewer(1)
- Gtk2-Perl POD Reading Program
- poe(3)
- portable multitasking/networking framework for any event loop
- poe-gen-tests(1)
- make standard POE tests for third-party modules
- poedit(1)
- gettext catalogs editor
- pofilter(1)
- Perform quality checks on Gettext PO, XLIFF and TMX localization files
- pogo(1)
- simple audio player
- pogrep(1)
- Grep XLIFF, Gettext PO and TMX localization files
- pointer-capture-applet(1)
- Creates area on panel to capture pointer
- polarablexpr(3)
- moves inverters to atomic level
- polardupablexpr(3)
- duplicates expression/moves down inverters
- policykit_auth_selinux(8)
- Security Enhanced Policy for policykit_auth processes
- policykit_grant_selinux(8)
- Security Enhanced Policy for policykit_grant processes
- policykit_resolve_selinux(8)
- Security Enhanced Policy for policykit_resolve processes
- policykit_selinux(8)
- Security Enhanced Policy for policykit processes
- policytool-java-1.6.0-openjdk(1)
- PolicyTool Administration GUI Utility
- policytool-java-1.7.0-openjdk(1)
- PolicyTool Administration GUI Utility
- polipo(1)
- caching web proxy
- polkit(8)
- Authorization Framework
- polkitd(8)
- PolicyKit daemon
- poll(2)
- wait for some event on file descriptor
- poll(3)
- input/output multiplexing
- poll_joystick(3)
- Polls joystick. Allegro game programming library
- poll_keyboard(3)
- Polls keyboard. Allegro game programming library
- poll_mouse(3)
- Polls mouse. Allegro game programming library
- poll_scroll(3)
- Checks status of scroll request with triple buffering. Allegro game programming library
- pollrcvd(8)
- Hyla FAX script for delivering facsimile received by polling
- polygon(3)
- Draws filled polygon. Allegro game programming library
- polygon3d(3)
- Draws 3d polygon onto specified bitmap. Allegro game programming library
- polygon3d_f(3)
- Draws 3d polygon onto specified bitmap. Allegro game programming library
- polygon_z_normal(3)
- Finds Z component of normal vector to three vertices. Allegro game programming library
- polygon_z_normal_f(3)
- Finds Z component of normal vector to three vertices. Allegro game programming library
- polyhedra(1)
- draws 80 uniform polyhedra/their duals
- polyhedra(6)
- draws 80 uniform polyhedra/their duals
- polymerge(1)
- merge coincident vertices, collinear edges, coplanar faces in OOGL OFF object
- polyominoes(1)
- fill rectangle with irregularly-shaped blocks
- polyominoes(6)
- fill rectangle with irregularly-shaped blocks
- polytopes(1)
- Draws one of six regular 4d polytopes rotating in 4d
- polytopes(6)
- Draws one of six regular 4d polytopes rotating in 4d
- polytype_atex(3)
- Polygon rendering mode type Allegro game programming library
- polytype_atex_lit(3)
- Polygon rendering mode type Allegro game programming library
- polytype_atex_mask(3)
- Polygon rendering mode type Allegro game programming library
- polytype_atex_mask_lit(3)
- Polygon rendering mode type Allegro game programming library
- polytype_atex_mask_trans(3)
- Polygon rendering mode type Allegro game programming library
- polytype_atex_trans(3)
- Polygon rendering mode type Allegro game programming library
- polytype_flat(3)
- Polygon rendering mode type Allegro game programming library
- polytype_gcol(3)
- Polygon rendering mode type Allegro game programming library
- polytype_grgb(3)
- Polygon rendering mode type Allegro game programming library
- polytype_ptex(3)
- Polygon rendering mode type Allegro game programming library
- polytype_ptex_lit(3)
- Polygon rendering mode type Allegro game programming library
- polytype_ptex_mask(3)
- Polygon rendering mode type Allegro game programming library
- polytype_ptex_mask_lit(3)
- Polygon rendering mode type Allegro game programming library
- polytype_ptex_mask_trans(3)
- Polygon rendering mode type Allegro game programming library
- polytype_ptex_trans(3)
- Polygon rendering mode type Allegro game programming library
- pom2(1)
- convert POD to Text, HTML, etc., with Pod::POM
- pomdump(1)
- dump POM parse tree for POD document
- pomerge(1)
- Merges XLIFF/Gettext PO localization files
- pondus(1)
- personal weight manager for GTK+2
- pong(1)
- Pong Home Video Game Emulator
- pong(6)
- Pong Home Video Game Emulator
- pool(3)
- Load Distribution Facility
- pooltype(1)
- WEB pool file
- pop3d(8)
- POP3 server process
- pop3p(8)
- POP3 proxy gateway service
- pop3test(1)
- interactive POP3 test program
- pop_config_state(3)
- Pops previously pushed config state. Allegro game programming library
- popd(1)
- bash built-in commands, see bash
- popen(3)
- pipe stream to/from process
- popt(3)
- Parse options
- popup_dialog(3)
- do_dialog() used for popup dialogs. Allegro game programming library
- porestructure(1)
- Restructure Gettxt PO files produced by poconflicts into original directory tree for merging using pomerge
- port(4)
- system memory, kernel memory and system ports
- porting(3)
- Porting From IAR to AVR GCC
- portmap(8)
- DARPA port to RPC program number mapper
- portmap_helper_selinux(8)
- Security Enhanced Policy for portmap_helper processes
- portmap_selinux(8)
- Security Enhanced Policy for portmap processes
- portrelease(1)
- release previously-reserved ports
- portreserve(1)
- reserve ports to prevent portmap mapping them
- portreserve_selinux(8)
- Security Enhanced Policy for portreserve processes
- pos_form_cursor(3)
- position form window cursor
- pos_menu_cursor(3)
- position menu's cursor
- posegment(1)
- Segment Gettext PO, XLIFF and TMX localization files at sentence level
- position_dialog(3)
- Moves array of dialog objects to specified position. Allegro game programming library
- position_mouse(3)
- Moves mouse to specified screen position. Allegro game programming library
- position_mouse_z(3)
- Sets mouse wheel position global variable. Allegro game programming library
- posix(3)
- Perl interface to IEEE Std 1003.1
- posix_fadvise(2)
- predeclare access pattern for file data
- posix_fadvise(3)
- file advisory info
- posix_fallocate(3)
- allocate file space
- posix_madvise(3)
- memory advisory info/alignment control
- posix_mem_offset(3)
- find offset/length of mapped typed memory block
- posix_memalign(3)
- allocate aligned memory
- posix_openpt(3)
- open pseudoterminal device
- posix_spawn(3)
- spawn process
- posix_spawn_file_actions_addclose(3)
- add close/open action to spawn file actions object
- posix_spawn_file_actions_adddup2(3)
- add dup2 action to spawn file actions object
- posix_spawn_file_actions_addopen(3)
- add close/open action to spawn file actions object
- posix_spawn_file_actions_destroy(3)
- destroy/initialize spawn file actions object
- posix_spawn_file_actions_init(3)
- destroy/initialize spawn file actions object
- posix_spawnattr_destroy(3)
- destroy/initialize spawn attribs object
- posix_spawnattr_getflags(3)
- get/set spawn-flags attrib of spawn attribs object
- posix_spawnattr_getpgroup(3)
- get/set spawn-pgroup attrib of spawn attribs object
- posix_spawnattr_getschedparam(3)
- get/set spawn-schedparam attrib of spawn attribs object
- posix_spawnattr_getschedpolicy(3)
- get/set spawn-schedpolicy attrib of spawn attribs object
- posix_spawnattr_getsigdefault(3)
- get/set spawn-sigdefault attrib of spawn attribs object
- posix_spawnattr_getsigmask(3)
- get/set spawn-sigmask attrib of spawn attribs object
- posix_spawnattr_init(3)
- destroy/initialize spawn attribs object
- posix_spawnattr_setflags(3)
- get/set spawn-flags attrib of spawn attribs object
- posix_spawnattr_setpgroup(3)
- get/set spawn-pgroup attrib of spawn attribs object
- posix_spawnattr_setschedparam(3)
- get/set spawn-schedparam attrib of spawn attribs object
- posix_spawnattr_setschedpolicy(3)
- get/set spawn-schedpolicy attrib of spawn attribs object
- posix_spawnattr_setsigdefault(3)
- get/set spawn-sigdefault attrib of spawn attribs object
- posix_spawnattr_setsigmask(3)
- get/set spawn-sigmask attrib of spawn attribs object
- posix_spawnp(3)
- spawn process
- posix_trace_attr_destroy(3)
- destroy/initialize trace stream attribs object
- posix_trace_attr_getclockres(3)
- retrieve/set info about trace stream
- posix_trace_attr_getcreatetime(3)
- retrieve/set info about trace stream
- posix_trace_attr_getgenversion(3)
- retrieve/set info about trace stream
- posix_trace_attr_getinherited(3)
- retrieve/set behavior of trace stream
- posix_trace_attr_getlogfullpolicy(3)
- retrieve/set behavior of trace stream
- posix_trace_attr_getlogsize(3)
- retrieve/set trace stream size attribs
- posix_trace_attr_getmaxdatasize(3)
- retrieve/set trace stream size attribs
- posix_trace_attr_getmaxsystemeventsize(3)
- retrieve/set trace stream size attribs
- posix_trace_attr_getmaxusereventsize(3)
- retrieve/set trace stream size attribs
- posix_trace_attr_getname(3)
- retrieve/set info about trace stream
- posix_trace_attr_getstreamfullpolicy(3)
- retrieve/set behavior of trace stream
- posix_trace_attr_getstreamsize(3)
- retrieve/set trace stream size attribs
- posix_trace_attr_init(3)
- destroy/initialize trace stream attribs object
- posix_trace_attr_setinherited(3)
- retrieve/set behavior of trace stream
- posix_trace_attr_setlogfullpolicy(3)
- retrieve/set behavior of trace stream
- posix_trace_attr_setlogsize(3)
- retrieve/set trace stream size attribs
- posix_trace_attr_setmaxdatasize(3)
- retrieve/set trace stream size attribs
- posix_trace_attr_setname(3)
- retrieve/set info about trace stream
- posix_trace_attr_setstreamfullpolicy(3)
- retrieve/set behavior of trace stream
- posix_trace_attr_setstreamsize(3)
- retrieve/set trace stream size attribs
- posix_trace_clear(3)
- clear trace stream/trace log
- posix_trace_close(3)
- trace log management
- posix_trace_create(3)
- trace stream initialization, flush, and shutdown from process
- posix_trace_create_withlog(3)
- trace stream initialization, flush, and shutdown from process
- posix_trace_event(3)
- trace functions for instrumenting application code
- posix_trace_eventid_equal(3)
- change trace event type identifier
- posix_trace_eventid_get_name(3)
- change trace event type identifier
- posix_trace_eventid_open(3)
- trace functions for instrumenting application code
- posix_trace_eventset_add(3)
- change trace event type sets
- posix_trace_eventset_del(3)
- change trace event type sets
- posix_trace_eventset_empty(3)
- change trace event type sets
- posix_trace_eventset_fill(3)
- change trace event type sets
- posix_trace_eventset_ismember(3)
- change trace event type sets
- posix_trace_eventtypelist_getnext_id(3)
- iterate over mapping of trace event types
- posix_trace_eventtypelist_rewind(3)
- iterate over mapping of trace event types
- posix_trace_flush(3)
- trace stream initialization, flush, and shutdown from process
- posix_trace_get_attr(3)
- trace attribs/trace status
- posix_trace_get_filter(3)
- retrieve/set filter of initialized trace stream
- posix_trace_get_status(3)
- trace attribs/trace status
- posix_trace_getnext_event(3)
- trace event
- posix_trace_open(3)
- trace log management
- posix_trace_rewind(3)
- trace log management
- posix_trace_set_filter(3)
- retrieve/set filter of initialized trace stream
- posix_trace_shutdown(3)
- trace stream initialization, flush, and shutdown from process
- posix_trace_start(3)
- trace start/stop
- posix_trace_stop(3)
- trace start/stop
- posix_trace_timedgetnext_event(3)
- trace event
- posix_trace_trid_eventid_open(3)
- change trace event type identifier
- posix_trace_trygetnext_event(3)
- trace event
- posix_typed_mem_get_info(3)
- query typed memory info
- posix_typed_mem_open(3)
- open typed memory object
- posixoptions(7)
- optional parts of POSIX standard
- post(1)
- Simple user agent
- post_form(3)
- write/erase forms from associated subwindows
- post_menu(3)
- write/erase menus from associated subwindows
- postalias(1)
- Postfix alias database maintenance
- postcat(1)
- Postfix queue file contents
- postconf(1)
- Postfix config utility
- postconf(5)
- Postfix config parameters
- postdrop(1)
- Postfix mail posting utility
- postfix(1)
- Postfix control program
- postfix-wrapper(5)
- Postfix multi-instance API
- postfix_bounce_selinux(8)
- Security Enhanced Policy for postfix_bounce processes
- postfix_cleanup_selinux(8)
- Security Enhanced Policy for postfix_cleanup processes
- postfix_local_selinux(8)
- Security Enhanced Policy for postfix_local processes
- postfix_map_selinux(8)
- Security Enhanced Policy for postfix_map processes
- postfix_master_selinux(8)
- Security Enhanced Policy for postfix_master processes
- postfix_pickup_selinux(8)
- Security Enhanced Policy for postfix_pickup processes
- postfix_pipe_selinux(8)
- Security Enhanced Policy for postfix_pipe processes
- postfix_postdrop_selinux(8)
- Security Enhanced Policy for postfix_postdrop processes
- postfix_postqueue_selinux(8)
- Security Enhanced Policy for postfix_postqueue processes
- postfix_qmgr_selinux(8)
- Security Enhanced Policy for postfix_qmgr processes
- postfix_selinux(8)
- Security Enhanced Policy for postfix processes
- postfix_showq_selinux(8)
- Security Enhanced Policy for postfix_showq processes
- postfix_smtp_selinux(8)
- Security Enhanced Policy for postfix_smtp processes
- postfix_smtpd_selinux(8)
- Security Enhanced Policy for postfix_smtpd processes
- postfix_virtual_selinux(8)
- Security Enhanced Policy for postfix_virtual processes
- postgres(1)
- PostgreSQL database server
- postgresql-relay(8)
- multiplex all your databases to one point of origin
- postgresql_autodoc(1)
- creates postgresql tables overview
- postgresql_selinux(8)
- Security Enhanced Policy for postgresql processes
- postgrey(8)
- Postfix Greylisting Policy Server
- postgrey_selinux(8)
- Security Enhanced Policy for postgrey processes
- postkick(1)
- kick Postfix service
- postlock(1)
- lock mail folder/execute command
- postlog(1)
- Postfix-compatible logging utility
- postman(5)
-
- postmap(1)
- Postfix lookup table management
- postmaster(1)
- PostgreSQL database server
- postmulti(1)
- Postfix multi-instance manager
- postqueue(1)
- Postfix queue control
- postsuper(1)
- Postfix superintendent
- postw32(1)
- Free Pascal Windows 32-bit executable post processor
- poswap(1)
- Builds new translation file with target of input language as source language
- pot2po(1)
- Convert template files translation files, preserving existing translations
- poterminology(1)
- reads set of .po/.pot files to produce pootle-terminology.pot
- potrace(1)
- transform bitmaps into vector graphics
- pound(8)
- HTTP/HTTPS reverse-proxy/load-balancer
- poundctl(8)
- control pound daemon
- pow(3)
- power functions
- pow10(3)
- base-10 power functions
- pow10f(3)
- base-10 power functions
- pow10l(3)
- base-10 power functions
- power-status-changed(7)
- event signalling change of power status
- powercom(8)
- UPS driver for serial Powercom/Trust/Advice UPS equipment
- powerman(1)
- power on/off nodes
- powerman-devices(7)
- Powerman Device config Notes
- powerman.conf(5)
- config file for PowerMan
- powerman.dev(5)
- PowerMan device specification files
- powermand(8)
- power control/monitoring daemon
- poweroff(8)
- reboot/stop system
- powerpanel(8)
- Driver for PowerPanel Plus compatible UPS equipment
- powerpc64-linux-gnu-addr2line(1)
- convert addresses into file names/line numbers
- powerpc64-linux-gnu-ar(1)
- create, modify, and extract from archives
- powerpc64-linux-gnu-as(1)
- portable GNU assembler
- powerpc64-linux-gnu-c++filt(1)
- Demangle C++/Java symbols
- powerpc64-linux-gnu-cpp(1)
- C Preprocessor
- powerpc64-linux-gnu-dlltool(1)
- Create files needed to build/use DLLs
- powerpc64-linux-gnu-elfedit(1)
- Update ELF header of ELF files
- powerpc64-linux-gnu-gcc(1)
- GNU project C/C++ compiler
- powerpc64-linux-gnu-gcov(1)
- coverage testing tool
- powerpc64-linux-gnu-gprof(1)
- call graph profile data
- powerpc64-linux-gnu-ld(1)
- GNU linker
- powerpc64-linux-gnu-nlmconv(1)
- converts object code into NLM
- powerpc64-linux-gnu-nm(1)
- symbols from object files
- powerpc64-linux-gnu-objcopy(1)
- copy/translate object files
- powerpc64-linux-gnu-objdump(1)
- info from object files
- powerpc64-linux-gnu-ranlib(1)
- make index to archive
- powerpc64-linux-gnu-readelf(1)
- Displays info about ELF files
- powerpc64-linux-gnu-size(1)
- section sizes/total size
- powerpc64-linux-gnu-strings(1)
- print strings of printable char in files
- powerpc64-linux-gnu-strip(1)
- Discard symbols from object files
- powerpc64-linux-gnu-windmc(1)
- generates Windows message resources
- powerpc64-linux-gnu-windres(1)
- change Windows resources
- powertop(1)
- analyze power consumption on Intel-based laptops
- powertop(8)
- analyze power consumption on Intel-based laptops
- powf(3)
- power functions
- powl(3)
- power functions
- powwow(6)
- telnet protocol client for MUD playing
- ppc386(1)
- Free Pascal Compiler binary, name derived from Portable
- ppcarm(1)
- Free Pascal Compiler binary, name derived from Portable
- ppcppc(1)
- Free Pascal Compiler binary, name derived from Portable
- ppcsparc(1)
- Free Pascal Compiler binary, name derived from Portable
- ppcx64(1)
- Free Pascal Compiler binary, name derived from Portable
- ppdc(1)
- cups ppd compiler
- ppdcfile(5)
- cups ppd compiler source file format
- ppdep(1)
- FPC Pascal unit dependency tracking program
- ppdhtml(1)
- cups html summary generator
- ppdi(1)
- import ppd files
- ppdmerge(1)
- merge ppd files
- ppdpo(1)
- ppd message catalog generator
- ppi(3)
- Parse, Analyze and change Perl
- ppl-config(1)
- obtain info about installation of Parma Polyhedra Library
- ppl_lcdd(1)
- PPL-based program for vertex/facet enumeration of convex polyhedra
- ppl_lpsol(1)
- PPL-based mixed integer programming problem solver
- ppm(5)
- Netpbm color image format
- ppm2nokia(1)
- converts PPM/PGM files to Nokia NOL/NGG format
- ppm2tiff(1)
- create TIFF file from PPM, PGM and PBM image files
- ppm3d(1)
- convert two PPM images into anaglyph PPM
- ppmbrighten(1)
- change PPM image's Saturation/Value
- ppmchange(1)
- change all pixels of one color to another in PPM image
- ppmcie(1)
- draw CIE color chart as PPM image
- ppmcolormask(1)
- produce mask of areas of certain color in PPM file
- ppmcolors(1)
- obsolete
- ppmdcfont(1)
- Turn Ppmdfont file into C source for builtin font
- ppmddumpfont(1)
- dump Ppmdfont file
- ppmdim(1)
- dim PPM image
- ppmdist(1)
- simplistic grayscale assignment for machine generated, color images
- ppmdither(1)
- ordered dither for color images
- ppmdmkfont(1)
- Create Ppmdfont 'standard'
- ppmdraw(1)
- draw lines, text, etc on PPM image
- ppmfade(1)
- make transition between two image files using special effects
- ppmflash(1)
- brighten picture to approach white
- ppmforge(1)
- fractal forgeries of clouds, planets, and starry skies
- ppmhist(1)
- print histogram of colors in PPM image
- ppmlabel(1)
- add text to PPM image
- ppmmake(1)
- create PPM image of specified color/dimensions
- ppmmix(1)
- blend together two PPM images
- ppmnorm(1)
- replaced by pnmnorm
- ppmntsc(1)
- Make RGB colors legal for NTSC/PAL color systems
- ppmpat(1)
- make pretty PPM image
- ppmquant(1)
- quantize colors in PPM image down to specified number
- ppmquantall(1)
- run Pnmquant on bunch of files all at once, so they share common colormap
- ppmrainbow(1)
- make rainbow
- ppmrelief(1)
- run Laplacian relief filter on PPM image
- ppmrough(1)
- create PPM image of two colors with ragged border between them
- ppmshadow(1)
- add simulated shadows to PPM image
- ppmshift(1)
- shift lines of PPM image left/right by random amount
- ppmspread(1)
- displace PPM image's pixels by random amount
- ppmtoacad(1)
- convert PPM to Autocad database/slide
- ppmtoarbtxt(1)
- make image in arbitrary text format from PPM image
- ppmtobmp(1)
- convert PPM image into BMP file
- ppmtoexr(1)
- convert PPM image to OpenEXR format
- ppmtoeyuv(1)
- convert PPM image into Berkeley YUV file
- ppmtogif(1)
-
- ppmtoicr(1)
- convert PPM image into NCSA ICR format
- ppmtoilbm(1)
- convert PPM image into ILBM file
- ppmtojpeg(1)
- replaced by pnmtojpeg
- ppmtoleaf(1)
- convert PPM image to Interleaf image format
- ppmtolj(1)
- convert PPM image to HP LaserJet PCL 5 Color file
- ppmtolss16(1)
- Convert PPM to LSS16 image
- ppmtomap(1)
- create map of all colors in PPM image
- ppmtomitsu(1)
- convert PPM image to Mitsubishi S340-10 file
- ppmtoneo(1)
- convert PPM into Atari Neochrome .neo file
- ppmtopcx(1)
- convert PPM image to PCX file
- ppmtopgm(1)
- convert PPM image to PGM image
- ppmtopi1(1)
- convert PPM image into Atari Degas .pi1 file
- ppmtopict(1)
- convert PPM image to Macintosh PICT file
- ppmtopj(1)
- convert PPM image to HP PaintJet file
- ppmtopjxl(1)
- convert PPM image to HP PaintJet XL PCL file
- ppmtoppm(1)
- copy PPM image
- ppmtopuzz(1)
- convert PPM image to X11 'puzzle' file
- ppmtorgb3(1)
- separate PPM image into three PGMs
- ppmtosixel(1)
- convert PPM image to DEC sixel format
- ppmtoterm(1)
- convert PPM image to ANSI ISO 6429 ascii image
- ppmtouil(1)
- replaced by pamtouil
- ppmtowinicon(1)
- convert PPM image into Windows .ico file
- ppmtoxpm(1)
- convert PPM image to X11 pixmap
- ppmtoy4m(1)
- Convert PPM images to YUV4MPEG2 stream
- ppmtoyuv(1)
- convert PPM image to Abekas YUV file
- ppmtoyuvsplit(1)
- convert PPM image to 3 subsampled raw YUV files
- ppmtv(1)
- make PPM image look like taken from American TV
- ppmwheel(1)
- make PPM image of color wheel
- ppoll(2)
- wait for some event on file descriptor
- pport(1)
- change computer port pins
- pportd(1)
- set/toggle parallel port pins on/off
- ppp-watch(8)
- daemon to make PPP interfaces act more like other interfaces
- pppd(8)
- Point-to-Point Protocol Daemon
- pppd-radattr(8)
- RADIUS utility plugin for pppd
- pppd-radius(8)
- RADIUS authentication plugin for pppd
- pppd_selinux(8)
- Security Enhanced Policy for pppd processes
- pppdump(8)
- convert PPP record file to readable format
- pppoe(8)
- user-space PPPoE client
- pppoe-connect(8)
- manage PPPoE link
- pppoe-relay(8)
- user-space PPPoE relay agent
- pppoe-server(8)
- user-space PPPoE server
- pppoe-setup(8)
- configure Roaring Penguin PPPoE client
- pppoe-sniff(8)
- examine network for non-standard PPPoE frames
- pppoe-start(8)
- bring up PPPoE link
- pppoe-status(8)
- report on status of PPPoE link
- pppoe-stop(8)
- shut down PPPoE link
- pppoe.conf(5)
- config file used by pppoe-start, pppoe-stop, pppoe-status and pppoe-connect
- pppstats(8)
- print PPP statistics
- pprof(1)
- manual page for pprof
- pptemplate(1)
- make Makefile.PL/PP file skeleton
- pptp(8)
- PPTP driver
- pptp_selinux(8)
- Security Enhanced Policy for pptp processes
- pptpsetup(8)
- Point-to-Point Tunneling Protocol setup
- ppudump(1)
- FPC Pascal unit dump program
- ppufiles(1)
- FPC Pascal unit object file lister
- ppumove(1)
- FPC Pascal unit mover
- pq2(1)
- CLI to dataset meta-repository based on ROOT files
- pq2-ana-dist(1)
- Analyse file distribution of dataset from dataset meta-repository based on ROOT files
- pq2-cache(1)
- display/clear local cache content of remote dataset meta-repository based on ROOT files
- pq2-info-server(1)
- datasets on given server from dataset meta-repository based on ROOT files
- pq2-ls(1)
- available datasets in dataset meta-repository based on ROOT files
- pq2-ls-files(1)
- file content of dataset from dataset meta-repository based on ROOT files
- pq2-ls-files-server(1)
- file content of dataset on given server from dataset meta-repository based on ROOT files
- pq2-put(1)
- Register one/more datasets in dataset meta-repository based on ROOT files
- pq2-redistribute(1)
- Execute file movements as determined by pq2-ana-dist
- pq2-rm(1)
- Remove one/more datasets from dataset meta-repository based on ROOT files
- pq2-verify(1)
- Extract content one/more datasets from dataset meta-repository based on ROOT files
- pr(1)
- convert text files for printing
- pr29_4(3)
- API function
- pr29_4z(3)
- API function
- pr29_8z(3)
- API function
- pr29_strerror(3)
- API function
- pr3287(1)
- IBM host printing tool
- praliases(8)
- system mail aliases
- prancid(1)
- Cisco config filter
- prctl(2)
- operations on process
- prcv(2)
- LAM physical layer message passing
- prcvc(2)
- LAM physical layer message passing
- prcvo(2)
- LAM physical layer message passing
- pre2ncgm(1)
- convert pre-CGM NCAR metafile to NCAR CGM
- pread(2)
- read from/write to file descriptor at given offset
- pread(3)
- read from file
- pread64(2)
- read from/write to file descriptor at given offset
- preadv(2)
- read/write data into multiple buffers
- precv(2)
- LAM physical layer message passing
- prefork(3)
- Optimized module loading for forking/non-forking processes
- prefresh(3)
- create/display curses pads
- prelink(8)
- prelink ELF shared libraries/binaries to speed up startup time
- prelink.conf(5)
- prelink ELF shared libraries/binaries to speed up startup time
- prelink_cron_system_selinux(8)
- Security Enhanced Policy for prelink_cron_system processes
- prelink_selinux(8)
- Security Enhanced Policy for prelink processes
- prelude_audisp_selinux(8)
- Security Enhanced Policy for prelude_audisp processes
- prelude_correlator_selinux(8)
- Security Enhanced Policy for prelude_correlator processes
- prelude_lml_selinux(8)
- Security Enhanced Policy for prelude_lml processes
- prelude_selinux(8)
- Security Enhanced Policy for prelude processes
- prepare(7)
- prepare statement for execution
- prepare_transaction(7)
- prepare current transaction for two-phase commit
- preparehistfactory(1)
- create working directory for HistFactory tools
- preserve(3)
- avoid freeing storage while it's being used
- pretranslate(1)
- Fill localization files with suggested translations based on translation memory/existing translations
- prettypr(3)
- generic pretty printer library
- prevd(1)
- move backward through directory history
- prezip-bin(1)
- prefix zip delta word list compressor/decompressor
- prg2lout(1)
- convert computer program text into Lout
- prima(3)
- perl graphic toolkit
- print_access_vector(3)
- convert between SELinux class/permission values/string names
- print_description(3)
- mib_api functions
- print_mib(3)
- mib_api functions
- print_objid(3)
- mib_api functions
- print_value(3)
- mib_api functions
- print_variable(3)
- mib_api functions
- printafm(1)
- Print metrics from Postscript font in AFM format using ghostscript
- printcbm(1)
- Commodore BASIC file
- printdbl(3)
- Convert floating value to string
- printenv(1)
- print all/part of environment
- printers.conf(5)
- printer config file for cups
- printexc(3)
- Facilities for printing exceptions
- printf(1)
- format/print data
- printf(3)
- formatted output conversion
- printftest(6)
- tests vgagl gl_printf function
- printlines(1)
- prints raw image data of vasari file format
- printw(3)
- print formatted output in curses windows
- private(3)
-
- privoxy(1)
- Privacy Enhancing Proxy
- privoxy_selinux(8)
- Security Enhanced Policy for privoxy processes
- prj2make(1)
- Makefile generator from Visual Studio/Sharp Develop solution files
- prlimit(2)
- get/set resource limits
- prm(1)
- remove file
- prmdir(1)
- remove empty directory
- probemodem(8)
- This script probes modem attached to serial line/reports results of certain commands
- proc(5)
- process info pseudo-file system
- proc_lib(3)
- Functions for asynchronous/synchronous start of processes adhering to OTP design principles
- process_vm_readv(2)
- transfer data between process address spaces
- process_vm_writev(2)
- transfer data between process address spaces
- processcsv.py(1)
- process virt-top CSV files
- procinfo(8)
- system status gathered from /proc
- procmail(1)
- autonomous mail processor
- procmail_selinux(8)
- Security Enhanced Policy for procmail processes
- procmailex(5)
- procmail rcfile examples
- procmailrc(5)
- procmail rcfile
- procmailsc(5)
- procmail weighted scoring technique
- procschema(5)
- LAM process schema format
- procserv(1)
- Process Server with Telnet Console/Log Access
- prof(2)
- unimplemented system calls
- profil(3)
- execution time profile
- profiles(1)
- utility to report/change SIDs in registry files
- proftpd(8)
- Professional configurable, secure file transfer protocol server
- program_invocation_name(3)
- obtain name used to invoke calling program
- program_invocation_short_name(3)
- obtain name used to invoke calling program
- progress(1)
- feed input to command, displaying progress bar
- proj(1)
- forward cartographic projection filter
- project(1)
- project data along line or great circle, make profile track, or translate coordinates
- projects(5)
- persistent project root defintion
- projid(5)
- project name mapping file
- prol(5)
- define rules for symbolic to real layout translation
- proof(1)
-
- proofd(1)
- PROOF
- proofserv(1)
- PROOF
- prop2po(1)
- convert Java/Mozilla .properties files to Gettext PO localization files
- propertylist(3)
- work with Mac plists at low level
- proplists(3)
- Support functions for property lists
- propwatch(1)
- monitor X11 properties
- prosodyctl(1)
- Manage Prosody XMPP server
- protected(3)
- private data fields which are inherited by child classes
- protocolrevision(3)
- macros/functions
- protocols(5)
- protocols definition file
- protocolversion(3)
- macros/functions
- protoize(1)
- automatically add/remove function prototypes
- proton(1)
-
- prove(1)
- Run tests through TAP harness
- providence(1)
- eye in glory screenhack
- providence(6)
- eye in glory screenhack
- proxy(8)
- HTTP proxy gateway service
- proxy-init.pl(1)
-
- proxy-server.conf(5)
- config file for openstack-swift proxy server
- proxymap(8)
- Postfix lookup table proxy server
- proxymngr(1)
- proxy manager service
- proxytunnel(1)
- tunnel connection throught standard HTTPS proxy
- prqd(1)
- Print quota enforcement daemon
- prqdcl(1)
- Print quota daemon client
- prun(1)
- run program
- prune(1)
- Prune directed graphs
- pruneemptydirs(1)
- Detects stale source directories in CVS tree
- prunehistory(8)
- remove tokens from Usenet history file
- ps(1)
- report snapshot of current processes
- ps2ascii(1)
- Ghostscript translator from PostScript/PDF to ASCII
- ps2eps(1)
- EPS files
- ps2epsi(1)
- make conforming Encapsulated PostScript
- ps2fax(8)
- image P OST S CRIPT ® for facsimile transmission by Hyla FAX
- ps2frag(1)
- obsolete shell script for PSfrag system
- ps2pdf(1)
- PDF using ghostscript
- ps2pdf12(1)
- PDF using ghostscript
- ps2pdf13(1)
- PDF 1.3 using ghostscript
- ps2pdfwr(1)
- PDF without specifying CompatibilityLevel, using ghostscript
- ps2pk(1)
- creates TeX pkfont from type1 PostScript font
- ps2ps(1)
- Ghostscript PostScript distiller
- ps2raster(1)
- Converts one/several PostScript file to other formats using GhostScript
- ps2sp(1)
- manual page for ps2sp
- ps_evol(1)
- fine-tune A4 PostScript drawings
- psad_selinux(8)
- Security Enhanced Policy for psad processes
- psame(1)
- finds similarities between files/versions of files
- psbasemap(1)
- To plot PostScript basemaps
- psbbox(1)
- Replace BoundingBox line in PostScript files by real BoundingBox
- psblack(1)
- PostScript filter
- psbook(1)
- rearrange pages in PostScript file into signatures
- pscap(8)
- see capabilities
- psclip(1)
- To set up polygonal clip paths
- pscoast(1)
- To plot land-masses, water-masses, coastlines, borders, and rivers
- pscontour(1)
- Contour xyz-data by direct triangulation [method]
- pscoupe(1)
- Plot cross-sections of focal mechanisms
- pscp(1)
- SCP /SFTP client
- pscss(1)
- manual page for pscss
- psed(1)
- stream editor
- pselect(2)
- synchronous I/O multiplexing
- pselect(3)
- synchronous I/O multiplexing
- pselect6(2)
- synchronous I/O multiplexing
- psend(2)
- LAM physical layer message passing
- psfaddtable(1)
- add Unicode char table to console font
- psfgettable(1)
- extract embedded Unicode char table from console font
- psfstriptable(1)
- remove embedded Unicode char table from console font
- psftp(1)
- interactive SFTP client
- psfxtable(1)
- handle Unicode char tables for console fonts
- pshistogram(1)
- Bin data/plot histograms
- psiconv(1)
- Translate Psion 5/other EPOC device files
- psiconv-config(1)
- get info about installed version of Psiconv
- psidtopgm(1)
- convert PostScript 'image' data to PGM image
- psiginfo(3)
- print signal message
- psignal(3)
- print signal message
- psimage(1)
- To plot images on maps
- psk-crack(1)
- Crack IKE Aggressive Mode Pre-Shared Keys
- psktool(1)
- Simple PSK password tool
- pslatex(1)
- utility to typeset LaTeX files using PostScript fonts
- pslegend(1)
- To plot map legend
- pslib(3)
- PostScript based plotting library
- pslogin(1)
- secure remote tcp login using strong stream cipher encryption/diffie-hellman key exchanges
- psmandup(1)
- print duplex on non duplex printers
- psmask(1)
- To clip/mask areas of no data on map
- psmeca(1)
- Plot focal mechanisms on maps
- psmegaplot(1)
- To create poster-size PostScript plots from page-size plot
- psmerge(1)
- filter to merge several PostScript files into one
- psnd(2)
- LAM physical layer message passing
- psndc(2)
- LAM physical layer message passing
- psndo(2)
- LAM physical layer message passing
- psnup(1)
- multiple pages per sheet
- psonly(1)
- Extract PS data from print job
- pspax(1)
- ELF/PaX info about running processes
- pspell-config(1)
- prints info about libpspell installation
- psplit(1)
- tool for splitting PostScript files with multiple frames into individual PostScript files, or simply determining number of pages in file
- pspolar(1)
- Plot polarities on inferior focal half-sphere on maps
- psql(1)
- PostgreSQL interactive terminal
- psresize(1)
- rescale/centre pages of PostScript file
- psrose(1)
- Plot as windrose diagram/polar histogram
- psscale(1)
- Plot gray scale/color scale on maps
- pssegy(1)
- Create imagemasked postscript from SEGY file
- pssegyz(1)
- Create imagemasked postscript from SEGY file
- psselect(1)
- select pages from PostScript file
- psset(1)
- insert page device request in PostScript files
- pssh(1)
- parallel ssh program
- pst2dii(1)
- extract email messages from MS Outlook .pst file in DII load format
- pst2ldif(1)
- extract contacts from MS Outlook .pst file in .ldif format
- pstack(1)
- print stack trace of running process
- pstatus(1)
- device status
- pstex2eps(1)
- make EPS file from PLplot pstex driver generated file
- pstext(1)
- To plot text strings on maps
- pstoedit(1)
- tool converting PostScript/PDF files into various vector graphic formats
- pstoimg(1)
- Convert PostScript file to bitmap image using Ghostscript/Netpbm utilities
- pstopdf(1)
- convert EPS to PDF
- pstopnm(1)
- convert PostScript file to PNM image
- pstops(1)
- shuffle pages in PostScript file
- pstree(1)
- tree of processes
- pstruct(1)
- Dump C structures as generated from cc -g -S stabs
- psub(1)
- perform process substitution
- psvelo(1)
- Plot velocity vectors, crosses, and wedges on maps
- pswhite(1)
- PostScript filter
- pswiggle(1)
- Plot anomaly along track on map
- pswrap(1)
- creates C procedures from segments of PostScript language code
- psxy(1)
- Plot lines, polygons, and symbols on maps
- psxyz(1)
- Plot lines, polygons, and symbols in 3-D
- pt_chown(5)
- helper function for grantpt, changes ownship and permissions of pseudotty
- ptagdir(1)
- print directory in which tag was found
- ptags(1)
- make Vim-style tags for your modules
- ptal_selinux(8)
- Security Enhanced Policy for ptal processes
- ptar(1)
-
- ptardiff(1)
- program that diffs extracted archive against unextracted one
- ptchown_selinux(8)
- Security Enhanced Policy for ptchown processes
- pterm(1)
- yet another X terminal emulator
- pth(3)
- GNU Portable Threads
- pth-config(1)
- Pth library build utility
- pthread_atfork(3)
- register fork handlers
- pthread_attr_destroy(3)
- initialize/destroy thread attribs object
- pthread_attr_getaffinity_np(3)
- set/get CPU affinity attrib in thread attribs object
- pthread_attr_getdetachstate(3)
- set/get detach state attrib in thread attribs object
- pthread_attr_getguardsize(3)
- set/get guard size attrib in thread attribs object
- pthread_attr_getinheritsched(3)
- set/get inherit scheduler attrib in thread attribs object
- pthread_attr_getschedparam(3)
- set/get scheduling parameter attribs in thread attribs object
- pthread_attr_getschedpolicy(3)
- set/get scheduling policy attrib in thread attribs object
- pthread_attr_getscope(3)
- set/get contention scope attrib in thread attribs object
- pthread_attr_getstack(3)
- set/get stack attribs in thread attribs object
- pthread_attr_getstackaddr(3)
- set/get stack address attrib in thread attribs object
- pthread_attr_getstacksize(3)
- set/get stack size attrib in thread attribs object
- pthread_attr_init(3)
- initialize/destroy thread attribs object
- pthread_attr_setaffinity_np(3)
- set/get CPU affinity attrib in thread attribs object
- pthread_attr_setdetachstate(3)
- set/get detach state attrib in thread attribs object
- pthread_attr_setguardsize(3)
- set/get guard size attrib in thread attribs object
- pthread_attr_setinheritsched(3)
- set/get inherit scheduler attrib in thread attribs object
- pthread_attr_setschedparam(3)
- set/get scheduling parameter attribs in thread attribs object
- pthread_attr_setschedpolicy(3)
- set/get scheduling policy attrib in thread attribs object
- pthread_attr_setscope(3)
- set/get contention scope attrib in thread attribs object
- pthread_attr_setstack(3)
- set/get stack attribs in thread attribs object
- pthread_attr_setstackaddr(3)
- set/get stack address attrib in thread attribs object
- pthread_attr_setstacksize(3)
- set/get stack size attrib in thread attribs object
- pthread_barrier_destroy(3)
- destroy/initialize barrier object
- pthread_barrier_init(3)
- destroy/initialize barrier object
- pthread_barrier_wait(3)
- synchronize at barrier
- pthread_barrierattr_destroy(3)
- destroy/initialize barrier attribs object
- pthread_barrierattr_getpshared(3)
- get/set process-shared attrib of barrier attribs object
- pthread_barrierattr_init(3)
- destroy/initialize barrier attribs object
- pthread_barrierattr_setpshared(3)
- get/set process-shared attrib of barrier attribs object
- pthread_cancel(3)
- send cancellation request to thread
- pthread_cleanup_pop(3)
- push/pop thread cancellation clean-up handlers
- pthread_cleanup_pop_restore_np(3)
- push/pop thread cancellation clean-up handlers while saving cancelability type
- pthread_cleanup_push(3)
- push/pop thread cancellation clean-up handlers
- pthread_cleanup_push_defer_np(3)
- push/pop thread cancellation clean-up handlers while saving cancelability type
- pthread_cond_broadcast(3)
- broadcast/signal condition
- pthread_cond_destroy(3)
- destroy/initialize condition variables
- pthread_cond_init(3)
- destroy/initialize condition variables
- pthread_cond_signal(3)
- broadcast/signal condition
- pthread_cond_timedwait(3)
- wait on condition
- pthread_cond_wait(3)
- wait on condition
- pthread_condattr_destroy(3)
- destroy/initialize condition variable attribs object
- pthread_condattr_getclock(3)
- get/set clock selection condition variable attrib
- pthread_condattr_getpshared(3)
- get/set process-shared condition variable attribs
- pthread_condattr_init(3)
- destroy/initialize condition variable attribs object
- pthread_condattr_setclock(3)
- get/set clock selection condition variable attrib
- pthread_condattr_setpshared(3)
- get/set process-shared condition variable attribs
- pthread_create(3)
- create new thread
- pthread_detach(3)
- detach thread
- pthread_equal(3)
- compare thread IDs
- pthread_exit(3)
- terminate calling thread
- pthread_getaffinity_np(3)
- set/get CPU affinity of thread
- pthread_getattr_np(3)
- attribs of created thread
- pthread_getconcurrency(3)
- set/get concurrency level
- pthread_getcpuclockid(3)
- ID of thread's CPU time clock
- pthread_getname_np(3)
- set/get name of thread
- pthread_getschedparam(3)
- set/get scheduling policy/parameters of thread
- pthread_getspecific(3)
- thread-specific data management
- pthread_join(3)
- join with terminated thread
- pthread_key_create(3)
- thread-specific data key creation
- pthread_key_delete(3)
- thread-specific data key deletion
- pthread_kill(3)
- send signal to thread
- pthread_kill_other_threads_np(3)
- terminate all other threads in process
- pthread_mutex_destroy(3)
- destroy/initialize mutex
- pthread_mutex_getprioceiling(3)
- get/set priority ceiling of mutex
- pthread_mutex_init(3)
- destroy/initialize mutex
- pthread_mutex_lock(3)
- lock/unlock mutex
- pthread_mutex_setprioceiling(3)
- get/set priority ceiling of mutex
- pthread_mutex_timedlock(3)
- lock mutex
- pthread_mutex_trylock(3)
- lock/unlock mutex
- pthread_mutex_unlock(3)
- lock/unlock mutex
- pthread_mutexattr_destroy(3)
- destroy/initialize mutex attribs object
- pthread_mutexattr_getprioceiling(3)
- get/set prioceiling attrib of mutex attribs object
- pthread_mutexattr_getprotocol(3)
- get/set protocol attrib of mutex attribs object
- pthread_mutexattr_getpshared(3)
- get/set process-shared attrib
- pthread_mutexattr_gettype(3)
- get/set mutex type attrib
- pthread_mutexattr_init(3)
- destroy/initialize mutex attribs object
- pthread_mutexattr_setprioceiling(3)
- get/set prioceiling attrib of mutex attribs object
- pthread_mutexattr_setprotocol(3)
- get/set protocol attrib of mutex attribs object
- pthread_mutexattr_setpshared(3)
- get/set process-shared attrib
- pthread_mutexattr_settype(3)
- get/set mutex type attrib
- pthread_once(3)
- dynamic package initialization
- pthread_rwlock_destroy(3)
- destroy/initialize read-write lock object
- pthread_rwlock_init(3)
- destroy/initialize read-write lock object
- pthread_rwlock_rdlock(3)
- lock read-write lock object for reading
- pthread_rwlock_timedrdlock(3)
- lock read-write lock for reading
- pthread_rwlock_timedwrlock(3)
- lock read-write lock for writing
- pthread_rwlock_tryrdlock(3)
- lock read-write lock object for reading
- pthread_rwlock_trywrlock(3)
- lock read-write lock object for writing
- pthread_rwlock_unlock(3)
- unlock read-write lock object
- pthread_rwlock_wrlock(3)
- lock read-write lock object for writing
- pthread_rwlockattr_destroy(3)
- destroy/initialize read-write lock attribs object
- pthread_rwlockattr_getpshared(3)
- get/set process-shared attrib of read-write lock attribs object
- pthread_rwlockattr_init(3)
- destroy/initialize read-write lock attribs object
- pthread_rwlockattr_setpshared(3)
- get/set process-shared attrib of read-write lock attribs object
- pthread_self(3)
- obtain ID of calling thread
- pthread_setaffinity_np(3)
- set/get CPU affinity of thread
- pthread_setcancelstate(3)
- set cancelability state/type
- pthread_setcanceltype(3)
- set cancelability state/type
- pthread_setconcurrency(3)
- set/get concurrency level
- pthread_setname_np(3)
- set/get name of thread
- pthread_setschedparam(3)
- set/get scheduling policy/parameters of thread
- pthread_setschedprio(3)
- set scheduling priority of thread
- pthread_setspecific(3)
- thread-specific data management
- pthread_sigmask(3)
- examine/change mask of blocked signals
- pthread_sigqueue(3)
- queue signal/data to thread
- pthread_spin_destroy(3)
- destroy/initialize spin lock object
- pthread_spin_init(3)
- destroy/initialize spin lock object
- pthread_spin_lock(3)
- lock spin lock object
- pthread_spin_trylock(3)
- lock spin lock object
- pthread_spin_unlock(3)
- unlock spin lock object
- pthread_testcancel(3)
- request delivery of any pending cancellation request
- pthread_timedjoin_np(3)
- try to join with terminated thread
- pthread_tryjoin_np(3)
- try to join with terminated thread
- pthread_yield(3)
- yield processor
- pthreads(7)
- POSIX threads
- ptked(1)
- editor in Perl/Tk
- ptksh(1)
- provide graphical user interface for testing Perl/Tk commands/scripts
- ptmx(4)
- pseudoterminal master/slave
- ptools(3)
- Tools for Perl Tool Developers
- ptop(1)
- FPC Pascal configurable source beautifier
- ptop.cfg(5)
- ptop source-beautifier config file
- ptp4l(8)
- PTP Boundary/Ordinary Clock
- ptrace(2)
- process trace
- pts(4)
- pseudoterminal master/slave
- ptsname(3)
- name of slave pseudoterminal
- ptsname_r(3)
- name of slave pseudoterminal
- ptunnel(8)
- tunnel TCP connections over ICMP echo request/reply packets
- ptx(1)
- produce permuted index of file contents
- pty(7)
- pseudoterminal interfaces
- ptype(3)
- mbk list of typed pointers
- public(3)
-
- public_key(3)
- API module for public key infrastructure
- publican(1)
- DocBook XML publishing tool
- publican(3)
- Used to control settings for sub modules
- publicfile_selinux(8)
- Security Enhanced Policy for publicfile processes
- pullnews(1)
- Pull news from one news server/feed it to another
- pullnews(8)
- perl script for pulling news from one news machine/feeding it to another
- pulsar(1)
- intersecting planes, alpha blending, fog, and textures
- pulsar(6)
- intersecting planes, alpha blending, fog, and textures
- pulse(8)
- heartbeating daemon for monitoring health of cluster nodes
- pulse-client.conf(5)
- PulseAudio client config file
- pulse-daemon.conf(5)
- PulseAudio daemon config file
- pulseaudio(1)
- PulseAudio Sound System
- pulseaudio_selinux(8)
- Security Enhanced Policy for pulseaudio processes
- pumount(1)
- umount arbitrary hotpluggable devices as normal user
- pump(1)
- accelerate remote compilation with distcc
- punycode_decode(3)
- API function
- punycode_encode(3)
- API function
- punycode_strerror(3)
- API function
- pup(8)
- Package updater
- puplet(8)
- Package update notification
- puppet(8)
-
- puppet-agent(8)
- puppet agent daemon
- puppet-apply(8)
- Apply Puppet manifests locally
- puppet-ca(8)
- Local Puppet Certificate Authority management
- puppet-catalog(8)
- Compile, save, view, and convert catalogs
- puppet-cert(8)
- Manage certificates/requests
- puppet-certificate(8)
- Provide access to CA for certificate management
- puppet-certificate_request(8)
- Manage certificate requests
- puppet-certificate_revocation_list(8)
- Manage list of revoked certificates
- puppet-config(8)
- Interact with Puppet's config options
- puppet-describe(8)
- help about resource types
- puppet-device(8)
- Manage remote network devices
- puppet-doc(8)
- make Puppet documentation/references
- puppet-facts(8)
- Retrieve/store facts
- puppet-file(8)
- Retrieve/store files in filebucket
- puppet-filebucket(8)
- Store/retrieve files in filebucket
- puppet-help(8)
- Puppet help
- puppet-inspect(8)
- Send inspection report
- puppet-instrumentation_data(8)
- Manage instrumentation listener accumulated data
- puppet-instrumentation_listener(8)
- Manage instrumentation listeners
- puppet-instrumentation_probe(8)
- Manage instrumentation probes
- puppet-key(8)
- Create, save, and remove certificate keys
- puppet-kick(8)
- Remotely control puppet agent
- puppet-man(8)
- Puppet manual pages
- puppet-master(8)
- puppet master daemon
- puppet-module(8)
- Creates, installs and searches for modules on Puppet Forge
- puppet-node(8)
- View/manage node definitions
- puppet-parser(8)
- Interact directly with parser
- puppet-plugin(8)
- Interact with Puppet plugin system
- puppet-queue(8)
- Queuing daemon for asynchronous storeconfigs
- puppet-report(8)
- Create, display, and submit reports
- puppet-resource(8)
- resource abstraction layer shell
- puppet-resource_type(8)
- View classes, defined resource types, and nodes from all manifests
- puppet-secret_agent(8)
- Mimics puppet agent
- puppet-status(8)
- View puppet server status
- puppet.conf(5)
-
- puppet_selinux(8)
- Security Enhanced Policy for puppet processes
- puppetca(8)
-
- puppetd(8)
-
- puppetdoc(8)
-
- puppetmaster_selinux(8)
- Security Enhanced Policy for puppetmaster processes
- puppetmasterd(8)
-
- puppetqd(8)
-
- puppetrun(8)
-
- pure(1)
- Pure interpreter
- pure-authd(8)
- External authentication agent for Pure-FTPd
- pure-ftpd(8)
- simple File Transfer Protocol server
- pure-ftpwho(8)
- Report current FTP sessions
- pure-mrtginfo(8)
- provide MRTG-graphable user count for ftpd
- pure-pw(8)
- Manage virtual users files for Pure-FTPd
- pure-pwconvert(8)
- make virtual users file from system accounts
- pure-quotacheck(8)
- Update virtual quota files for Pure-FTPd
- pure-statsdecode(8)
- human-readable dates from stats logfile
- pure-uploadscript(8)
- Automatically run external program after successful upload
- purple(3)
- Perl extension to libpurple instant messenger library
- push_config_state(3)
- Pushes current config state. Allegro game programming library
- pushd(1)
- bash built-in commands, see bash
- put_backslash(3)
- Puts path separator at end of path if needed. Allegro game programming library
- putc(3)
- output of char/strings
- putc_unlocked(3)
- nonlocking stdio functions
- putchar(3)
- output of char/strings
- putchar_unlocked(3)
- nonlocking stdio functions
- putenv(3)
- change/add environment variable
- putgrent(3)
- group database entry to file
- putmsg(2)
- unimplemented system calls
- putmsg(3)
- send message on STREAM
- putp(3)
- curses interfaces to terminfo database
- putpixel(3)
- Writes pixel into bitmap. Allegro game programming library
- putpmsg(2)
- unimplemented system calls
- putpmsg(3)
- send message on STREAM
- putpwent(3)
- password file entry
- puts(3)
- output of char/strings
- putspent(3)
- shadow password file entry
- putty(1)
- GUI SSH, Telnet and Rlogin client for X
- puttygen(1)
- public-key generator for PuTTY tools
- puttytel(1)
- GUI Telnet/Rlogin client for X
- pututline(3)
- access utmp file entries
- pututxline(3)
- access utmp file entries
- putw(3)
- input/output of words
- putwc(3)
- wide char to FILE stream
- putwc_unlocked(3)
- nonlocking stdio functions
- putwchar(3)
- wide char to stdout
- putwchar_unlocked(3)
- nonlocking stdio functions
- putwin(3)
- miscellaneous curses utility routines
- puudecode(1)
-
- puuencode(1)
-
- puzzle-diff(8)
- Compare pictures with libpuzzle
- puzzle_set(3)
- set tunables for libpuzzle functions
- pv(1)
- monitor progress of data through pipe
- pva-addvo(1)
- add new VO
- pva-config(5)
- general PHP VOMS-Admin interface config
- pva-dbschema-update(1)
- update database schema
- pvalloc(3)
- allocate aligned memory
- pvchange(8)
- change attribs of physical volume
- pvck(8)
- check physical volume metadata
- pvcreate(8)
- initialize disk/partition for use by LVM
- pvdisplay(8)
- attribs of physical volume
- pvf(1)
- utilities to convert various sound formats
- pvfamp(1)
- utilities to convert various sound formats
- pvfcut(1)
- utilities to convert various sound formats
- pvfecho(1)
- utilities to convert various sound formats
- pvffft(1)
- utilities to convert various sound formats
- pvffile(1)
- utilities to convert various sound formats
- pvffilter(1)
- utilities to convert various sound formats
- pvfmix(1)
- utilities to convert various sound formats
- pvfnoise(1)
- utilities to convert various sound formats
- pvfreverse(1)
- utilities to convert various sound formats
- pvfsine(1)
- utilities to convert various sound formats
- pvfspeed(1)
- utilities to convert various sound formats
- pvftoau(1)
- utilities to convert various sound formats
- pvftobasic(1)
- utilities to convert various sound formats
- pvftolin(1)
- utilities to convert various sound formats
- pvftormd(1)
- utilities to convert various sound formats
- pvftovoc(1)
- utilities to convert various sound formats
- pvftowav(1)
- utilities to convert various sound formats
- pvm(1)
- PVM console
- pvm_addhosts(3)
- Add hosts to virtual machine
- pvm_addmhf(3)
- Install/remove message-handler functions
- pvm_advise(3)
- Controls use of direct task-to-task routing. [In : Replaced by pvm_setopt]
- pvm_archcode(3)
- Returns data representation code for PVM architecture name
- pvm_barrier(3)
- Blocks calling process until all processes in group have called it
- pvm_bcast(3)
- Broadcasts data in active message buffer to group of processes
- pvm_bufinfo(3)
- Returns info about message buffer
- pvm_catchout(3)
- Catch output from child tasks
- pvm_config(3)
- Returns info about present virtual machine config
- pvm_delete(3)
- delete data from pvmd database [In : Relaced by pvm_delinfo]
- pvm_delhosts(3)
- Deletes hosts from virtual machine
- pvm_exit(3)
- Tells local pvmd that this process is leaving PVM
- pvm_export(3)
- Mark environment variables to export through
- pvm_freebuf(3)
- Disposes of message buffer
- pvm_freezegroup(3)
- Freezes dynamic group membership/caches info locally
- pvm_gather(3)
- specified member of group receives messages from each member of group/gathers these messages into single array
- pvm_getfds(3)
- file descriptors in use by PVM
- pvm_getinst(3)
- Returns instance number in group of PVM process
- pvm_getopt(3)
- Returns value of libpvm options
- pvm_getrbuf(3)
- Returns message buffer identifier for active receive buffer
- pvm_getsbuf(3)
- Returns message buffer identifier for active send buffer
- pvm_gettid(3)
- Returns tid of process identified by group name/instance number
- pvm_gsize(3)
- Returns number of members presently in named group
- pvm_halt(3)
- Shuts down entire PVM system
- pvm_hostsync(3)
- time-of-day clock from PVM host
- pvm_initsend(3)
- Clear default send buffer/specify message encoding
- pvm_insert(3)
- store data in pvmd database [In : Relaced by pvm_putinfo]
- pvm_intro(1)
- Parallel Virtual Machine System
- pvm_joingroup(3)
- Enrolls calling process in named group
- pvm_kill(3)
- Terminates specified PVM process
- pvm_lookup(3)
- data from pvmd database [In : Relaced by pvm_getinfo]
- pvm_lvgroup(3)
- Unenrolls calling process from named group
- pvm_mcast(3)
- Multicasts data in active message buffer to set of tasks
- pvm_mkbuf(3)
- Creates new message buffer
- pvm_mstat(3)
- Returns status of host in virtual machine
- pvm_mytid(3)
- Returns tid of calling process
- pvm_newcontext(3)
- Request new context, change context, free existing context, and get current context, respectively
- pvm_notify(3)
- Request notification of PVM event such as host failure
- pvm_nrecv(3)
- Non-blocking receive
- pvm_pack(3)
- Pack active message buffer with arrays of prescribed data type
- pvm_parent(3)
- Returns tid of process that spawned calling process
- pvm_perror(3)
- Prints message describing last error returned by PVM call
- pvm_pkmesg(3)
- Pack messages into other messages
- pvm_precv(3)
- Receive message directly into buffer
- pvm_probe(3)
- Check if message has arrived
- pvm_psend(3)
- Pack/send data in one call
- pvm_pstat(3)
- Returns status of specified PVM process
- pvm_putinfo(3)
- Store/retrieve messages in global mailbox
- pvm_recv(3)
- Receive message
- pvm_recvf(3)
- Redefines comparison function used to accept messages
- pvm_recvinfo(3)
- Store/retrieve messages in global mailbox
- pvm_reduce(3)
- Performs reduction operation over members of specified group
- pvm_reg_hoster(3)
- Register task as PVM slave starter
- pvm_reg_rm(3)
- Register task as PVM resource manager
- pvm_reg_tasker(3)
- Register task as PVM task starter
- pvm_scatter(3)
- Sends to each member of group section of array from specified member of group
- pvm_send(3)
- Immediately sends data in active message buffer
- pvm_sendsig(3)
- Sends signal to another PVM process
- pvm_serror(3)
- Sets automatic error message printing on/off. [In : Replaced by pvm_setopt]
- pvm_setmwid(3)
- Get/set wait ID of message. [In : Relaced by pvm_getminfo/pvm_setminfo]
- pvm_setopt(3)
- Sets libpvm options
- pvm_setrbuf(3)
- Switches active receive buffer/saves previous buffer
- pvm_setsbuf(3)
- Switches active send buffer
- pvm_settmask(3)
- Get/set trace mask of task/its children
- pvm_shmd(1)
- PVM shared memory daemon
- pvm_siblings(3)
- return number/associated task ids of processes that were started together in single spawn call
- pvm_spawn(3)
- Starts new PVM processes
- pvm_start_pvmd(3)
- Starts new PVM daemon
- pvm_tasks(3)
- Returns info about tasks running on virtual machine
- pvm_tidtohost(3)
- Returns host of specified PVM process
- pvm_trecv(3)
- Receive with timeout
- pvm_unpack(3)
- Unpack active message buffer into arrays of prescribed data type
- pvmd(1)
- PVM daemon
- pvmd3(1)
- PVM daemon
- pvmfaddmhf(3)
- Install/remove message-handler functions
- pvmfdelinfo(3)
- Store/retrieve messages in global mailbox
- pvmfdelmhf(3)
- Install/remove message-handler functions
- pvmfputinfo(3)
- Store/retrieve messages in global mailbox
- pvmfrecvinfo(3)
- Store/retrieve messages in global mailbox
- pvmove(8)
- move physical extents
- pvremove(8)
- remove physical volume
- pvresize(8)
- resize disk/partition in use by LVM2
- pvs(8)
- report info about physical volumes
- pvscan(8)
- scan all disks for physical volumes
- pwck(8)
- verify integrity of password files
- pwconv(8)
- convert to/from shadow passwords/groups
- pwd(1)
- print name of current/working directory
- pwdb_chkpwd(8)
- Helper binary that verifies password of current user
- pwdhash(1)
- Generator of password hashes
- pwdx(1)
- report current working directory of process
- pwgen(1)
- make pronounceable passwords
- pwhich(1)
- Perl-only 'which'
- pwhois(1)
- Perl written whois client
- pwmake(1)
- simple tool for generating random relatively easily pronounceable passwords
- pwmconfig(8)
- tests PWM outputs of sensors/configures fancontrol
- pwquality.conf(5)
- config for libpwquality library
- pwrite(2)
- read from/write to file descriptor at given offset
- pwrite(3)
- on file
- pwrite64(2)
- read from/write to file descriptor at given offset
- pwritev(2)
- read/write data into multiple buffers
- pwscore(1)
- simple configurable tool for checking quality of password
- pwunconv(8)
- convert to/from shadow passwords/groups
- pwupdate(8)
- updates passwd/shadow NIS map
- pxeboot(8)
- Network Booting Operating Systems config Utility
- pxeos(8)
- PXEBoot Operating System description config Utility
- pxz(1)
- Parallel LZMA compressor compatible with XZ
- pyacc(1)
- Pascal Yacc compiler compiler
- pycolor(1)
- Colorize python file/stdin using ANSI/print to stdout
- pydcp(8)
-
- pydf(1)
- report colourised filesystem disk space usage
- pydsh(8)
-
- pygmentize(1)
- highlights input file
- pyhtmlizer(1)
- pretty-print Python source as HTML
- pylint(1)
- python code static checker
- pynag(1)
- front for manipulating nagios config
- pyreverse(1)
- parse python sources files/extract diagrams from them
- pyro(1)
- simulate fireworks
- pyro(6)
- simulate fireworks
- python(1)
- interpreted, interactive, object-oriented programming language
- python-nitrate(1)
- Python API for Nitrate test case management system
- pytrademgen(1)
- Python wrapper around C++ Simulated Travel Demand Generation Library