rhino(8) - Linux man page
Name
rhino - Driver for Brazilian Microsol RHINO UPS equipment
Note
This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).
Supported Hardware
This driver has been tested with :
- • Rhino 6000 VA
- • Rhino 7500 VA
- • Rhino 10000 VA
- • Rhino 20000 VA
- • Rhino 7500 VA
- All Rhino models are sinusoidal on-line.
Extra Arguments
This driver support the following extra optional settings in ups.conf(5):
battext = n - (default = 0, no extra battery, where n = Ampere*hour )
Commands
• load.on - Turn on the load immediately
- • load.off - Turn off the load immediately
- • bypass.start - Put the UPS in bypass mode
- • bypass.stop - Put the UPS out of bypass mode
- • shutdown.stayoff - Shut down in 3 minutes and do not return
- • bypass.start - Put the UPS in bypass mode
Author
Silvino B. Magalhães <sbm2yk@gmail.com>
See Also
The core driver:
- nutupsdrv(8)
Internet resources:
- The NUT (Network UPS Tools) home page: http://www.networkupstools.org/