Section 8: administration and privileged commands - Linux man pages
- 3proxy(8)
- 3[APA3A] tiny proxy server, or trivial proxy server, or free proxy server
- 80211debug(8)
- control debug output from madwifi 802.11 stack
- 80211stats(8)
- display collected madwifi 802.11 statistics
- abrt-dbus(8)
- dbus server for querying problem data
- abrt_dump_oops_selinux(8)
- Security Enhanced Policy for abrt_dump_oops processes
- abrt_handle_event_selinux(8)
- Security Enhanced Policy for abrt_handle_event processes
- abrt_helper_selinux(8)
- Security Enhanced Policy for abrt_helper processes
- abrt_retrace_coredump_selinux(8)
- Security Enhanced Policy for abrt_retrace_coredump processes
- abrt_retrace_worker_selinux(8)
- Security Enhanced Policy for abrt_retrace_worker processes
- abrt_selinux(8)
- Security Enhanced Policy for abrt processes
- abrtd(8)
- automated bug reporting tool's daemon
- accept(8)
- accept/reject jobs sent to destination
- accountsd_selinux(8)
- Security Enhanced Policy for accountsd processes
- acct_selinux(8)
- Security Enhanced Policy for acct processes
- accton(8)
- turns process accounting on/off
- acpi_listen(8)
- ACPI event listener
- acpid(8)
- Advanced config/Power Interface event daemon
- actsync(8)
- synchronize newsgroups
- actsyncd(8)
- run actsync to synchronize newsgroups
- ada_selinux(8)
- Security Enhanced Policy for ada processes
- addgnupghome(8)
- Create .gnupg home directories
- addpart(8)
- simple wrapper around add partition ioctl
- adduser(8)
- create new user/update default new user info
- adjtimex(8)
- display/set kernel time variables
- adsl-connect(8)
- manage PPPoE link
- adsl-setup(8)
- configure Roaring Penguin PPPoE client
- adsl-start(8)
- bring up PPPoE link
- adsl-status(8)
- report on status of PPPoE link
- adsl-stop(8)
- shut down PPPoE link
- afpd(8)
- Apple Filing Protocol daemon
- afs_bosserver_selinux(8)
- Security Enhanced Policy for afs_bosserver processes
- afs_fsserver_selinux(8)
- Security Enhanced Policy for afs_fsserver processes
- afs_kaserver_selinux(8)
- Security Enhanced Policy for afs_kaserver processes
- afs_ptserver_selinux(8)
- Security Enhanced Policy for afs_ptserver processes
- afs_selinux(8)
- Security Enhanced Policy for afs processes
- afs_vlserver_selinux(8)
- Security Enhanced Policy for afs_vlserver processes
- agetty(8)
- alternative getty
- aiccu_selinux(8)
- Security Enhanced Policy for aiccu processes
- aide_selinux(8)
- Security Enhanced Policy for aide processes
- aisexec_selinux(8)
- Security Enhanced Policy for aisexec processes
- alarms(8)
- display/set alarm indicators
- alsa_selinux(8)
- Security Enhanced Policy for alsa processes
- alternatives(8)
- maintain symbolic links determining default commands
- amaddclient(8)
- add client to existing Amanda config
- amadmin(8)
- administrative interface to control Amanda backups
- amaespipe(8)
- wrapper program for aespipe
- amanda(8)
- Open Source Backup Platform
- amanda_recover_selinux(8)
- Security Enhanced Policy for amanda_recover processes
- amanda_selinux(8)
- Security Enhanced Policy for amanda processes
- amarchiver(8)
- Create, extract or list amanda archive
- amavis_selinux(8)
- Security Enhanced Policy for amavis processes
- amcheck(8)
- run Amanda self-checks
- amcheckdb(8)
- check Amanda database for tape consistency
- amcheckdump(8)
- check results of Amanda dump
- amcleanup(8)
- run Amanda cleanup process after failure
- amcrypt(8)
- reference crypt program for Amanda symmetric data encryption
- amcrypt-ossl(8)
- crypt program for Amanda symmetric data encryption using OpenSSL
- amcrypt-ossl-asym(8)
- crypt program for Amanda asymmetric data encryption using OpenSSL
- amcryptsimple(8)
- reference simple crypt program for Amanda symmetric data encryption
- amd(8)
- automatically mount file systems
- amdd(8)
- Amanda version of dd
- amdevcheck(8)
- Validate Amanda device/volume
- amdump(8)
- back up all disks in Amanda config
- amfetchdump(8)
- extract backup images from multiple Amanda tapes
- amflush(8)
- flush Amanda backup files from holding disk to tape
- amgetconf(8)
- look up config parameters/change debug logs
- amgpgcrypt(8)
- reference crypt program for Amanda public-key data encryption
- amgtar(8)
- Amanda Application to interface with GNU Tar
- amlabel(8)
- label Amanda tape
- ammt(8)
- Amanda version of mt
- amoldrecover(8)
- Amanda index database browser
- amoverview(8)
- file systems processed by Amanda over time
- amplot(8)
- visualize behavior of Amanda
- amq(8)
- automounter query tool
- amrecover(8)
- Amanda index database browser
- amreport(8)
- make formatted output of statistics for Amanda run
- amrestore(8)
- extract backup images from Amanda tape
- amrmtape(8)
- remove tape from Amanda database
- amsamba(8)
- Amanda Application to interface with smbclient
- amserverconfig(8)
- setup initial Amanda config
- amservice(8)
- run amanda service on client
- amstar(8)
- Amanda Application to interface with star
- amstatus(8)
- state of Amanda run
- amtape(8)
- user interface to Amanda tape changer controls
- amtapetype(8)
- make tapetype definition by testing device directly
- amtoc(8)
- make TOC for Amanda run
- amtu(8)
- Abstract Machine Test Utility
- amtu_selinux(8)
- Security Enhanced Policy for amtu processes
- amvault(8)
- Copy Amanda dumps from one volume to another
- amverify(8)
- check Amanda tape for errors
- amverifyrun(8)
- check tapes written by last Amanda run
- amzfs-sendrecv(8)
- create zfs sendrecv
- amzfs-snapshot(8)
- create zfs snapshot
- anacron(8)
- runs commands periodically
- anvil(8)
- Postfix session count/request rate control
- aoe-discover(8)
- tell aoe driver to discover AoE devices
- aoe-flush(8)
- flush down devices out of aoe driver
- aoe-interfaces(8)
- restrict aoe driver to specified network interfaces
- aoe-mkdevs(8)
- create special device files for aoe driver
- aoe-mkshelf(8)
- create special device files for one shelf address
- aoe-revalidate(8)
- revalidate disk size of aoe device
- aoe-stat(8)
- print aoe device status report
- aoe-version(8)
- print AoE-related software version info
- aoecfg(8)
- change AoE config strings
- aoeping(8)
- simple communication with AoE device
- ap-auth(8)
- AP authorized MAC change utility
- ap-config(8)
- configure/monitor Atmel/NWN based
- ap-gl(8)
- configure/monitor ATMEL_PRISM based APs
- ap-mrtg(8)
- AP to MRTG data translator
- ap-tftp(8)
- TFTP client for upgrading ATMEL AT76C510 WiSOC-based APs Please read entire manpage prior using this utility. It may prevent you from problems arising later
- ap-trapd(8)
- SNMP trap processing daemon
- apache_selinux(8)
- Security Enhanced Policy for httpd processes
- apachectl(8)
- Apache HTTP Server Control Interface
- apcaccess(8)
- status info from apcupsd
- apccontrol(8)
- apcupsd event handler script
- apcsmart(8)
- Driver for American Power Conversion Smart Protocol UPS equipment
- apcsmart-old(8)
- Driver for American Power Conversion Smart Protocol UPS equipment
- apctest(8)
- apcupsd test program
- apcupsd(8)
- daemon for controlling most APC UPSes
- apcupsd_selinux(8)
- Security Enhanced Policy for apcupsd processes
- apgd(8)
- server that generates several random passwords
- apm_selinux(8)
- Security Enhanced Policy for apm processes
- apmd(8)
- Advanced Power Management daemon
- apmd_selinux(8)
- Security Enhanced Policy for apmd processes
- apphbd(8)
- Application Heartbeat Monitor for High-Availability
- applydeltaiso(8)
- reconstruct iso from old iso/deltaiso
- applydeltarpm(8)
- reconstruct rpm from deltarpm
- applyfilter(8)
- apply filter settings to news spool
- applygnupgdefaults(8)
- Run gpgconf --apply-defaults for all users
- apt(8)
- Advanced Package Tool
- apt-cache(8)
- APT package handling utility -- cache manipulator
- apt-cdrom(8)
- APT CDROM management utility
- apt-config(8)
- APT config Query program
- apt-get(8)
- APT package handling utility - interface
- aptitude(8)
- high-level interface to package manager
- apxs(8)
- APache eXtenSion tool
- arbitron(8)
- arbitron mailboxes
- arc-infoindex-relay(8)
- ARC info Index Relay Helper
- arc-infoindex-server(8)
- ARC info Index Server
- arc-vomsac-check(8)
- ARC VOMS AC-based queue policy enforcing plugin
- arched(8)
- ARC Hosting Environment Daemon
- archive(8)
- Usenet article archiver
- arp(8)
- change system ARP cache
- arp2ethers(8)
- convert arpwatch address database to ethers file format
- arpalert(8)
- ARP traffic monitoring
- arpd(8)
- userspace arp daemon
- arphound(8)
- Description
- arping(8)
- send ARP REQUEST to neighbour host
- arpsnmp(8)
- keep track of ethernet/ip address pairings
- arpspoof(8)
- intercept packets on switched LAN
- arptables(8)
- administration tool for arp packet filtering
- arptables-restore(8)
- Restore ARP Tables
- arptables-save(8)
- Save ARP Tables
- arpwatch(8)
- keep track of ethernet/ip address pairings
- arpwatch_selinux(8)
- Security Enhanced Policy for arpwatch processes
- asterisk(8)
- All-purpose telephony server
- asterisk_selinux(8)
- Security Enhanced Policy for asterisk processes
- astgenkey(8)
-
- ata_id(8)
- udev callout to read product/serial number from ATA drives
- atd(8)
- run jobs queued for later execution
- atftpd(8)
- Trivial File Transfer Protocol Server
- ath_info(8)
- print module version info, write some eeprom fields
- athchans(8)
- define channel range of madwifi devices
- athcool(8)
- control power-saving mode on AMD Athlon/Duron CPUs
- athctrl(8)
- sets maximum distance between communicating stations
- athdebug(8)
- control debug output from madwifi device subsystem
- athkey(8)
- manage encryption type/keys of madwifi devices
- athstats(8)
- inspect/monitor network traffic statistics
- atrun(8)
- run jobs queued for later execution
- attrd_updater(8)
- Part of Pacemaker cluster resource manager
- audisp-remote(8)
- plugin for remote logging
- audisp_remote_selinux(8)
- Security Enhanced Policy for audisp_remote processes
- audisp_selinux(8)
- Security Enhanced Policy for audisp processes
- audispd(8)
- event multiplexor
- audispd-zos-remote(8)
- z/OS Remote-services Audit dispatcher plugin
- audit-viewer(8)
- graphical utility for viewing
- audit2why(8)
- Translates SELinux audit messages into description of why access was denied
- auditctl(8)
- utility to assist controlling kernel's audit system
- auditctl_selinux(8)
- Security Enhanced Policy for auditctl processes
- auditd(8)
- Audit daemon
- auditd.conf(8)
- audit daemon config file
- auditd_selinux(8)
- Security Enhanced Policy for auditd processes
- aulast(8)
- program similar to last
- aulastlog(8)
- program similar to lastlog
- aureport(8)
- tool that produces summary reports of audit daemon logs
- ausearch(8)
- query audit daemon logs
- ausyscall(8)
- program that allows mapping syscall names/numbers
- auth_krb5(8)
- nnrpd Kerberos authenticator
- auth_smb(8)
- nnrpd Samba authenticator
- authconfig(8)
- interface for configuring system authentication resources
- authconfig-gtk(8)
- GUI utility for configuring user identity/system authentication services
- authconfig-tui(8)
- interface for configuring system authentication resources
- autodld(8)
- RPM auto update utilities
- autofs(8)
- Control Script for automounter
- autofs5(8)
- Control Script for automounter
- autoget(8)
- RPM auto update utilities
- autoins(8)
- RPM auto update utilities
- automount(8)
- manage autofs mount points
- automount2amd(8)
- converts old Sun automount maps to Amd maps
- automount5(8)
- manage autofs mount points
- automount_selinux(8)
- Security Enhanced Policy for automount processes
- automrg(8)
- RPM auto update utilities
- autoprg(8)
- RPM auto update utilities
- autosupport(8)
- provide Digium[tm]'s support with info
- autotrust(8)
- automated updates of DNSSEC trust anchors
- autoupd(8)
- RPM auto update utilities
- autoupdate(8)
- RPM auto update utilities
- autrace(8)
- program similar to strace
- auvirt(8)
- program that shows data related to virtual machines
- avahi-autoipd(8)
- IPv4LL network address config daemon
- avahi-autoipd.action(8)
- avahi-autoipd action script
- avahi-daemon(8)
- Avahi mDNS/DNS-SD daemon
- avahi-dnsconfd(8)
- Unicast DNS server from mDNS/DNS-SD config daemon
- avahi-dnsconfd.action(8)
- avahi-dnsconfd action script
- avahi_selinux(8)
- Security Enhanced Policy for avahi processes
- avcstat(8)
- SELinux AVC statistics
- avctrl(8)
- Bluetooth Audio/Video control utility
- avmcapictrl(8)
- Add, reset or remove active AVM cards and load firmware
- awstats_selinux(8)
- Security Enhanced Policy for awstats processes
- axfrdns(8)
-
- backup-manager(8)
- easy to use backup tool for your box
- backup-manager-purge(8)
- backup-manager's wrapper for outdating files
- backup-manager-upload(8)
- Multiprotocol uploader for backup-manager
- bacula(8)
- Network Backup Solution
- bacula-dir(8)
- Bacula Director
- bacula-fd(8)
- Bacula's File Daemon
- bacula-sd(8)
- Bacula's Storage Daemon
- badblocks(8)
- search device for bad blocks
- batcher(8)
- article-batching backend for InterNetNews
- bccmd(8)
- Utility for CSR BCCMD interface
- bcfg2-admin(8)
- Perform repository administration tasks
- bcfg2-build-reports(8)
- make state reports for Bcfg2 clients
- bcfg2-info(8)
- Creates local version of bcfg2 server core for state observation
- bcfg2-lint(8)
- Check Bcfg2 specification for validity, common mistakes
- bcfg2-ping-sweep(8)
- Update pingable/pingtime attribs in clients.xml
- bcfg2-repo-validate(8)
- Check Bcfg2 repository data against data schemas
- bcfg2-reports(8)
- Query reporting system for client status
- bcfg2-server(8)
- Server for client config specifications
- bcfg2_selinux(8)
- Security Enhanced Policy for bcfg2 processes
- bcmxcp(8)
- Driver for UPSes supporting serial BCM/XCP protocol
- bcmxcp_usb(8)
- Experimental driver for UPSes supporting BCM/XCP protocol over USB
- bconsole(8)
- Bacula's management Console
- bcopy(8)
- Bacula's 'Copy from tape'
- belkin(8)
- Driver for Belkin serial UPS equipment
- belkinunv(8)
- Driver for Belkin Universal UPS/compatible
- bestfcom(8)
- Driver for Best Power Fortress/Ferrups
- bestfortress(8)
- Driver for old Best Fortress UPS equipment
- bestuferrups(8)
- Driver for Best Power Micro-Ferrups
- bestups(8)
- Driver for Best Power/SOLA UPS equipment
- bextract(8)
- Bacula's 'Extract from tape'
- bgpd(8)
- BGPv4, BGPv4+, BGPv4- routing engine for use with Quagga routing
- bind_selinux(8)
- Security Enhanced Policy for named processes
- bing(8)
- compute point to point throughput using two sizes of ICMP ECHO_REQUEST packets to pair of remote hosts
- biosdecode(8)
- BIOS info decoder
- bitlbee(8)
- IRC gateway to IM chat networks
- bitlbee_selinux(8)
- Security Enhanced Policy for bitlbee processes
- blazer(8)
- Driver for Megatec/Q1 protocol serial/USB based UPS equipment
- blkdeactivate(8)
- utility to deactivate block devices
- blkid(8)
- utility to locate/print block device attribs
- blkiomon(8)
- monitor block device I/O based o blktrace data
- blktrace(8)
- make traces of i/o traffic on block devices
- blockdev(8)
- call block device ioctls from
- bls(8)
- Bacula's 'Tape LS'
- bluetooth_helper_selinux(8)
- Security Enhanced Policy for bluetooth_helper processes
- bluetooth_selinux(8)
- Security Enhanced Policy for bluetooth processes
- bluetoothd(8)
- Bluetooth daemon
- bmc-config(8)
- configure BMC values
- bmc-device(8)
- perform advanced BMC commands
- bmc-info(8)
- BMC info
- bmc-watchdog(8)
- BMC watchdog timer daemon/control utility
- bmchealth(8)
- BMC health
- boinc_selinux(8)
- Security Enhanced Policy for boinc processes
- bonnie++(8)
- test hard drive performance
- booleans(8)
- Policy booleans enable runtime customization of SELinux policy
- bootloader_selinux(8)
- Security Enhanced Policy for bootloader processes
- bootparamd(8)
- boot parameter server
- bounce(8)
- Postfix delivery status reports
- brcm_iscsiuio(8)
- Broadcom iSCSI UserSpace I/O driver
- brctl(8)
- ethernet bridge administration
- brctl_selinux(8)
- Security Enhanced Policy for brctl processes
- bscan(8)
- Bacula's 'Scan tape'
- btape(8)
- Bacula's Tape interface test program
- btkbdd(8)
- Bluetooth Keyboard Daemon
- btrace(8)
- perform live tracing for block devices
- btraceback(8)
- wrapper script around gdb/bsmtp
- btrecord(8)
- recreate IO loads recorded by blktrace
- btreplay(8)
- recreate IO loads recorded by blktrace
- btrfs(8)
- control btrfs filesystem
- btrfs-image(8)
- create/restore image of filesystem
- btrfs-show(8)
- scan /dev directory for btrfs partitions/print results
- btrfsck(8)
- check btrfs filesystem
- btrfsctl(8)
- control btrfs filesystem
- buffchan(8)
- buffered file-writing backend for InterNetNews
- bwbar(8)
- create textual/graphical readout of current bandwidth
- c2s(8)
- client-to-server connector
- cacertdir_rehash(8)
- create/update hash links to certificate files in directory
- cachefilesd(8)
- CacheFiles userspace management daemon
- cachefilesd_selinux(8)
- Security Enhanced Policy for cachefilesd processes
- cachemgr.cgi(8)
- squid HTTP proxy manager interface
- calamaris_selinux(8)
- Security Enhanced Policy for calamaris processes
- callback(8)
- call user back, presenting login prompt
- canna_selinux(8)
- Security Enhanced Policy for canna processes
- capiinfo(8)
- supported features of all installed CAPI2.0 controllers
- capiinit(8)
- start/stop CAPI-capable ISDN cards
- capiplugin(8)
- Plugin for pppd
- captest(8)
- demonstrate capabilities
- cardctl(8)
- PCMCIA card control utility
- cardmgr(8)
- PCMCIA device manager
- cardmgr_selinux(8)
- Security Enhanced Policy for cardmgr processes
- cbq(8)
- Class Based Queueing
- cciss_vol_status(8)
- status of logical drives attached to HP Smartarray controllers
- ccs(8)
- Cluster config System
- ccs_config_dump(8)
- make XML output of running config
- ccs_config_validate(8)
-
- ccs_selinux(8)
- Security Enhanced Policy for ccs processes
- ccs_sync(8)
- Cluster Synchronization Utility
- ccs_test(8)
- CCS daemon diagnostic tool
- ccs_tool(8)
- tool used to make online queries to cluster config
- ccs_update_schema(8)
- make cluster relaxng schema for cluster config validation
- ccsd(8)
- manages /etc/cluster/cluster.conf file
- cdcc_selinux(8)
- Security Enhanced Policy for cdcc processes
- cdrecord_selinux(8)
- Security Enhanced Policy for cdrecord processes
- ceph(8)
- ceph file system control utility
- ceph-authtool(8)
- ceph keyring change tool
- ceph-clsinfo(8)
- class object info
- ceph-conf(8)
- ceph conf file tool
- ceph-debugpack(8)
- ceph debug packer utility
- ceph-dencoder(8)
- ceph encoder/decoder utility
- ceph-fuse(8)
- FUSE-based client for ceph
- ceph-mds(8)
- ceph metadata server daemon
- ceph-mon(8)
- ceph monitor daemon
- ceph-osd(8)
- ceph object storage daemon
- ceph-rbdnamer(8)
- udev helper to name RBD devices
- ceph-run(8)
- restart daemon on core dump
- ceph-syn(8)
- ceph synthetic workload generator
- cephfs(8)
- ceph file system options utility
- certmaster_selinux(8)
- Security Enhanced Policy for certmaster processes
- certmonger(8)
-
- certmonger-certmaster-submit(8)
-
- certmonger-dogtag-ipa-renew-agent-submit(8)
-
- certmonger-ipa-submit(8)
-
- certmonger_selinux(8)
- Security Enhanced Policy for certmonger processes
- certmonger_unconfined_selinux(8)
- Security Enhanced Policy for certmonger_unconfined processes
- certwatch_selinux(8)
- Security Enhanced Policy for certwatch processes
- cf-agent(8)
- cfengine's change agent
- cf-execd(8)
- cfengine's execution agent
- cf-key(8)
- cfengine's key generator
- cf-know(8)
- cfengine's knowledge agent
- cf-monitord(8)
- cfengine's monitoring agent
- cf-promises(8)
- cfengine's promise analyzer
- cf-report(8)
- cfengine's reporting agent
- cf-runagent(8)
- Run agent
- cf-serverd(8)
- cfengine's server agent
- cfagent(8)
- system config agent
- cfdisk(8)
- Curses based disk partition table manipulator for
- cfengine(8)
- network config engine
- cfengine_execd_selinux(8)
- Security Enhanced Policy for cfengine_execd processes
- cfengine_monitord_selinux(8)
- Security Enhanced Policy for cfengine_monitord processes
- cfengine_selinux(8)
- Security Enhanced Policy for cfengine processes
- cfengine_serverd_selinux(8)
- Security Enhanced Policy for cfengine_serverd processes
- cfenvd(8)
- network config engine
- cfenvgraph(8)
- network config engine
- cfetoolcheck(8)
- Check new value against averages currently in database
- cfetoolcreate(8)
- Set up new Database
- cfetooldump(8)
- dump contents of database in XML format
- cfetoolgraph(8)
- create graphs from cfetool database
- cfetoolimport(8)
- import contents of database from XML format
- cfetoolinfo(8)
- database
- cfetoolupdate(8)
- Update database with new value
- cfexecd(8)
- network config engine
- cfg2html(8)
- creates nice HTML and plain ASCII documentation of your GNU/ system. WARNING, use this script AT YOUR OWN RISK
- cfg2html-linux(8)
- creates nice HTML and plain ASCII documentation of your GNU/ system. WARNING, use this script AT YOUR OWN RISK
- cfkey(8)
- network config engine
- cfrun(8)
- Execute remote cfagents
- cfservd(8)
- cfengine server daemon
- cfshow(8)
- Dump cfengine databases
- cgclear_selinux(8)
- Security Enhanced Policy for cgclear processes
- cgconfig_selinux(8)
- Security Enhanced Policy for cgconfig processes
- cgconfigparser(8)
- setup control group file system
- cgdcbxd(8)
- control group dcb event net_prio daemon
- cgdisk(8)
- Curses-based GUID partition table manipulator
- cgred_selinux(8)
- Security Enhanced Policy for cgred processes
- cgrulesengd(8)
- control group rules daemon
- change_console(8)
- change console used by init
- chat(8)
- Automated conversational script with modem
- chcat(8)
- change file SELinux security category
- chcpu(8)
- configure CPUs
- check_lft_balance(8)
- check InfiniBand unicast forwarding tables balance
- check_openmanage(8)
- Nagios plugin for checking hardware status on Dell servers running OpenManage
- checkgroups(8)
- update group descriptions
- checkmodule(8)
- SELinux policy module compiler
- checkpassword-pam(8)
- PAM-based checkpassword compatible authentication
- checkpc_selinux(8)
- Security Enhanced Policy for checkpc processes
- checkpolicy(8)
- SELinux policy compiler
- checkpolicy_selinux(8)
- Security Enhanced Policy for checkpolicy processes
- checkquorum(8)
- Check Quorum Watchdog Script
- chfn_selinux(8)
- Security Enhanced Policy for chfn processes
- chk_cyrus(8)
- perform consistency check of cyrus mailstore
- chkconfig(8)
- updates/queries runlevel info for system services
- chkfontpath(8)
- simple interface for adding, removing, and listing directories in X font server's path
- chkpwd_selinux(8)
- Security Enhanced Policy for chkpwd processes
- choptest(8)
- Hyla FAX page chopping test program
- chpasswd(8)
- update passwords in batch mode
- chrome_sandbox_nacl_selinux(8)
- Security Enhanced Policy for chrome_sandbox_nacl processes
- chrome_sandbox_selinux(8)
- Security Enhanced Policy for chrome_sandbox processes
- chrome_selinux(8)
- Security Enhanced Policy for chrome processes
- chronyd(8)
- chrony background daemon
- chronyd_selinux(8)
- Security Enhanced Policy for chronyd processes
- cibadmin(8)
- Part of Pacemaker cluster resource manager
- cifs.idmap(8)
- Userspace helper for mapping ids for Common Internet File System
- cifs.upcall(8)
- Userspace upcall helper for Common Internet File System
- cimauth(8)
- add, modify, remove, or list CIM namespace authorizations of users
- cimconfig(8)
- get, set, unset, or list CIM Server config properties
- cimcrl(8)
- Add, remove or list X509 Certificate Revocation Lists in PEM format CRL store
- cimreparchive(8)
- create archive copy of CIM Server repository
- cimserver(8)
- start/stop CIM Server; display version number/running status of CIM Server
- cimtrust(8)
- Add, remove or list X509 certificates in PEM format trust store
- cimuser(8)
- add, modify, remove, or list CIM users
- ciped_selinux(8)
- Security Enhanced Policy for ciped processes
- ckpasswd(8)
- nnrpd password authenticator
- clamav-milter(8)
- milter compatible mail scanner
- clamav-unofficial-sigs(8)
- Download, test, and install third-party ClamAV signature databases
- clamav-unofficial-sigs.sh(8)
- Download, test, and install third-party ClamAV signature databases
- clamd(8)
- anti-virus daemon
- clamd_selinux(8)
- Security Enhanced Policy for clamd processes
- clamscan_selinux(8)
- Security Enhanced Policy for clamscan processes
- clamsmtpd(8)
- SMTP server for scanning viruses via clamd
- clc-update-customized-images(8)
- internal clc commands
- cleanup(8)
- canonicalize/enqueue Postfix message
- clock(8)
- query/set hardware clock
- clockdiff(8)
- measure clock diff between hosts
- clogd_selinux(8)
- Security Enhanced Policy for clogd processes
- clone(8)
- UPS driver clone
- clubufflush(8)
- Flush buffers on service's file system
- clufindhostname(8)
- Find hostname/IP address given other
- clulog(8)
- Log message to cluster/system logs
- clurgmgrd(8)
- Resource Group Manager Daemon
- clurmtabd(8)
- Cluster NFS Remote Mount Table Daemon
- clustat(8)
- Cluster Status Utility
- clusvcadm(8)
- Cluster User Service Administration Utility
- clvmd(8)
- cluster LVM daemon
- clvmd_selinux(8)
- Security Enhanced Policy for clvmd processes
- cman_notify(8)
- CMAN Notification Daemon run-part alike script
- cman_tool(8)
- Cluster Management Tool
- cmannotifyd(8)
- CMAN Notification Daemon
- cmirrord(8)
- cluster mirror log daemon
- cmirrord_selinux(8)
- Security Enhanced Policy for cmirrord processes
- cmsd(8)
- Cluster Management Services daemon
- cnfsheadconf(8)
- set CNFS header
- cnfsstat(8)
- usage of cycbuffs
- cnid_dbd(8)
- implement access to CNID databases through dedicated daemon process
- cnid_metad(8)
- start cnid_dbd daemons on request
- cns_ssi(8)
- administer server side inventory
- cobblerd_selinux(8)
- Security Enhanced Policy for cobblerd processes
- combinedeltarpm(8)
- combine multiple deltarpms to single one
- comsat_selinux(8)
- Security Enhanced Policy for comsat processes
- condor_collector_selinux(8)
- Security Enhanced Policy for condor_collector processes
- condor_master_selinux(8)
- Security Enhanced Policy for condor_master processes
- condor_negotiator_selinux(8)
- Security Enhanced Policy for condor_negotiator processes
- condor_procd_selinux(8)
- Security Enhanced Policy for condor_procd processes
- condor_schedd_selinux(8)
- Security Enhanced Policy for condor_schedd processes
- condor_startd_selinux(8)
- Security Enhanced Policy for condor_startd processes
- confdb_keys(8)
- Overview of keys stored in config Database
- confdb_overview(8)
- Confdb Library Overview
- conmand(8)
- ConMan daemon
- cons.saver(8)
- general-purpose console screen save/restore server
- conserver(8)
- console server daemon
- consolehelper(8)
- wrapper that helps console users run system programs
- consolehelper-gtk(8)
- helper program for consolehelper
- consolekit_selinux(8)
- Security Enhanced Policy for consolekit processes
- consoletype_selinux(8)
- Security Enhanced Policy for consoletype processes
- controlchan(8)
- channel-fed control message handler
- convert4r4(8)
- Convert Exim config from to format
- convertquota(8)
- convert quota from old file format to new one
- coroipc_overview(8)
- Overview of coroipc libraries
- corosync(8)
- Corosync Cluster Engine
- corosync-blackbox(8)
- Dump live flight data from corosync blackbox
- corosync-cfgtool(8)
- administrative tool for corosync
- corosync-cpgtool(8)
- tool for displaying cpg groups/members
- corosync-fplay(8)
- flight data from corosync blackbox
- corosync-keygen(8)
- make authentication key for Corosync
- corosync-notifyd(8)
- Listen for important corosync events/send dbus/snmp traps
- corosync-objctl(8)
- Configure objects in Object Database
- corosync-pload(8)
- Start payload test
- corosync-quorumtool(8)
- Set/display quorum settings
- corosync_overview(8)
- Corosync overview
- corosync_selinux(8)
- Security Enhanced Policy for corosync processes
- courier_authdaemon_selinux(8)
- Security Enhanced Policy for courier_authdaemon processes
- courier_pcp_selinux(8)
- Security Enhanced Policy for courier_pcp processes
- courier_pop_selinux(8)
- Security Enhanced Policy for courier_pop processes
- courier_selinux(8)
- Security Enhanced Policy for courier processes
- courier_sqwebmail_selinux(8)
- Security Enhanced Policy for courier_sqwebmail processes
- courier_tcpd_selinux(8)
- Security Enhanced Policy for courier_tcpd processes
- cpfs.reiserfs(8)
- reiserfs filesystem copying program
- cpg_overview(8)
- CPG library overview
- cpglockd(8)
- CPG lock server for rgmanager
- cpucontrol_selinux(8)
- Security Enhanced Policy for cpucontrol processes
- cpudynd(8)
- CPU Dynamic frecuency daemon
- cpufreqd(8)
- intelligently monitor/change CPU frequency
- cpufreqselector_selinux(8)
- Security Enhanced Policy for cpufreqselector processes
- cpuspeed(8)
- user-space cpu frequency scaling program
- cpuspeed_selinux(8)
- Security Enhanced Policy for cpuspeed processes
- cqtest(8)
- Hyla FAX copy quality checking test program
- crack_selinux(8)
- Security Enhanced Policy for crack processes
- cracklib-check(8)
- Check passwords using libcrack2
- cracklib-format(8)
- cracklib dictionary utilities
- crash(8)
- Analyze crash dump data/live system
- crda(8)
- send to kernel wireless regulatory domain for given ISO/IEC 3166 alpha2
- create-cracklib-dict(8)
- Check passwords using libcrack2
- createrepo(8)
- Create repomd repository
- createrepo_c(8)
- C implementation of createrepo
- crm_attribute(8)
- Part of Pacemaker cluster resource manager
- crm_diff(8)
- Part of Pacemaker cluster resource manager
- crm_error(8)
- Part of Pacemaker cluster resource manager
- crm_failcount(8)
- Part of Pacemaker cluster resource manager
- crm_master(8)
- Part of Pacemaker cluster resource manager
- crm_mon(8)
- Part of Pacemaker cluster resource manager
- crm_node(8)
- Part of Pacemaker cluster resource manager
- crm_report(8)
- Part of Pacemaker cluster resource manager
- crm_resource(8)
- Part of Pacemaker cluster resource manager
- crm_shadow(8)
- Part of Pacemaker cluster resource manager
- crm_simulate(8)
- Part of Pacemaker cluster resource manager
- crm_standby(8)
- Part of Pacemaker cluster resource manager
- crm_ticket(8)
- Part of Pacemaker cluster resource manager
- crm_verify(8)
- Part of Pacemaker cluster resource manager
- crmadmin(8)
- Part of Pacemaker cluster resource manager
- cron(8)
- daemon to execute scheduled commands
- crond(8)
- daemon to execute scheduled commands
- crond_selinux(8)
- Security Enhanced Policy for crond processes
- crontab_selinux(8)
- Security Enhanced Policy for crontab processes
- crushtool(8)
- CRUSH map change tool
- cryptmount(8)
- mount/unmount/configure encrypted filing system
- cryptmount-setup(8)
- setup new encrypted filing system
- cryptsetup(8)
- setup cryptographic volumes for dm-crypt
- ctdbd_selinux(8)
- Security Enhanced Policy for ctdbd processes
- ctl_cyrusdb(8)
- perform operations common to all Cyrus databases
- ctl_deliver(8)
- perform operations on duplicate delivery database
- ctl_mboxlist(8)
- perform operations on mailbox list database
- ctlinnd(8)
- control InterNetNews daemon
- ctrlaltdel(8)
- set function of Ctrl-Alt-Del combination
- cups-calibrate(8)
- ESP CUPS Printer Calibration Tool
- cups-deviced(8)
- cups device daemon
- cups-driverd(8)
- cups driver daemon
- cups-genppd(8)
- make Gutenprint PPD files for use with CUPS
- cups-genppdupdate(8)
- update CUPS+Gutenprint PPD files
- cups-lpd(8)
- receive print jobs/report printer status to lpd clients
- cups-polld(8)
- cups printer polling daemon
- cups_pdf_selinux(8)
- Security Enhanced Policy for cups_pdf processes
- cups_selinux(8)
- Security Enhanced Policy for cups processes
- cupsaccept(8)
- accept/reject jobs sent to destination
- cupsaddsmb(8)
- export printers to samba for windows clients
- cupsctl(8)
- configure cupsd.conf options
- cupsd(8)
- cups scheduler
- cupsd_config_selinux(8)
- Security Enhanced Policy for cupsd_config processes
- cupsd_lpd_selinux(8)
- Security Enhanced Policy for cupsd_lpd processes
- cupsd_selinux(8)
- Security Enhanced Policy for cupsd processes
- cupsdisable(8)
- stop/start printers/classes
- cupsenable(8)
- stop/start printers/classes
- cupsfilter(8)
- convert file to another format using cups filters
- cupsreject(8)
- accept/reject jobs sent to destination
- cvs_selinux(8)
- Security Enhanced Policy for cvs processes
- cvsbug(8)
- send problem report about CVS to central support site
- cvt_cyrusdb(8)
- convert database file between cyrus database formats
- cvtbatch(8)
- convert Usenet batch file to INN format
- cyclades-ser-cli(8)
-
- cyclades-serial-client(8)
-
- cyphesis_selinux(8)
- Security Enhanced Policy for cyphesis processes
- cyr_dbtool(8)
- manage Cyrus databases
- cyr_df(8)
- report Cyrus spool partition disk space usage
- cyr_expire(8)
- expire messages/duplicate delivery database entries
- cyr_synclog(8)
- add entries to replication log
- cyrfetchnews(8)
- new articles from peer/feed to Cyrus
- cyrus-master(8)
- cyrus-master Cyrus process
- cyrus_selinux(8)
- Security Enhanced Policy for cyrus processes
- cytune(8)
- Tune Cyclades driver parameters
- dahdi_cfg(8)
- configures DAHDI kernel modules from /etc/dahdi/system.conf
- dahdi_genconf(8)
- make config for dahdi channels
- dahdi_hardware(8)
- Shows Dahdi hardware devices
- dahdi_monitor(8)
- checks rx/tx levels of DAHDI channels
- dahdi_registration(8)
- Handle registration of Xorcom XPD modules in dahdi
- dahdi_scan(8)
- Print config of DAHDI Spans
- dahdi_test(8)
- Test if DAHDI timer provides timely response
- dahdi_tool(8)
- Shows status of DAHDI interfaces
- dansguardian(8)
- web content filter
- darkstat(8)
- network statistics gatherer
- dbcheck(8)
- Bacula's Catalog Database Check/Clean program
- dbmail-export(8)
- export mailbox from DBMail mailsystem to mbox format
- dbmail-httpd(8)
- speaks HTTP-1.1 protocol
- dbmail-imapd(8)
- provides access to DBMail system to clients supporting Internet Message Access Protocol, IMAP4r1, as specified in RFC 3501
- dbmail-lmtpd(8)
- receive messages from MTA supporting Lightweight Mail Transport Protocol, as specified in RFC 2033
- dbmail-pop3d(8)
- provides access to DBMail system to client support- ing Post Office Protocol, POP3, as specified in RFC 1939
- dbmail-sievecmd(8)
- manipulates Sieve scripts in DBMail database
- dbmail-timsieved(8)
- speaks Manage Sieve draft protocol, used for managing Sieve scripts for user's email account
- dbmail-users(8)
- manages DBMail user database
- dbmail-util(8)
- maintains integrity/cleanliness of DBMail datatables
- dbprocs(8)
- Start/stop ovdb housekeeping processes
- dbskkd_selinux(8)
- Security Enhanced Policy for dbskkd processes
- dcbtool(8)
- manage Data Center Bridging settings of CEE DCB interface
- dcc_client_selinux(8)
- Security Enhanced Policy for dcc_client processes
- dcc_dbclean_selinux(8)
- Security Enhanced Policy for dcc_dbclean processes
- dcc_selinux(8)
- Security Enhanced Policy for dcc processes
- dccd_selinux(8)
- Security Enhanced Policy for dccd processes
- dccifd_selinux(8)
- Security Enhanced Policy for dccifd processes
- dccm_selinux(8)
- Security Enhanced Policy for dccm processes
- dcerpcd_selinux(8)
- Security Enhanced Policy for dcerpcd processes
- ddns-confgen(8)
- ddns key generation tool
- ddpt(8)
- copies data between files/storage devices. Support for devices that understand SCSI command set
- debootstrap(8)
- Bootstrap basic Debian system
- debuge4fs(8)
- ext2/ext3/ext4 file system debugger
- debugfs(8)
- ext2/ext3/ext4 file system debugger
- defer(8)
- Postfix delivery status reports
- deliver(8)
- deliver mail to IMAP mailbox
- delpart(8)
- simple wrapper around del partition ioctl
- deltacloudd_selinux(8)
- Security Enhanced Policy for deltacloudd processes
- denyhosts_selinux(8)
- Security Enhanced Policy for denyhosts processes
- depmod(8)
- make modules.dep/map files
- depmod_selinux(8)
- Security Enhanced Policy for depmod processes
- devicekit_disk_selinux(8)
- Security Enhanced Policy for devicekit_disk processes
- devicekit_power_selinux(8)
- Security Enhanced Policy for devicekit_power processes
- devicekit_selinux(8)
- Security Enhanced Policy for devicekit processes
- devkit-power-daemon(8)
- DeviceKit-power Daemon
- dhclient(8)
- Dynamic Host config Protocol Client
- dhclient-script(8)
- DHCP client network config script
- dhcp6c(8)
- DHCPv6 client daemon
- dhcp6r(8)
- DHCPv6 relay agent
- dhcp6s(8)
- DHCPv6 server daemon
- dhcpc_selinux(8)
- Security Enhanced Policy for dhcpc processes
- dhcpd(8)
- Dynamic Host config Protocol Server
- dhcpd_selinux(8)
- Security Enhanced Policy for dhcpd processes
- dhcping(8)
- send DHCP request to DHCP server to see if it's up/running
- dhcrelay(8)
- Dynamic Host config Protocol Relay Agent
- dialtest(8)
- Hyla FAX dial string processing rules test program
- dictd(8)
- dictionary database server
- dictd_selinux(8)
- Security Enhanced Policy for dictd processes
- dirsrv_selinux(8)
- Security Enhanced Policy for dirsrv processes
- dirsrv_snmp_selinux(8)
- Security Enhanced Policy for dirsrv_snmp processes
- dirsrvadmin_selinux(8)
- Security Enhanced Policy for dirsrvadmin processes
- dirsrvadmin_unconfined_script_selinux(8)
- Security Enhanced Policy for dirsrvadmin_unconfined_script processes
- disable(8)
- stop/start printers/classes
- discard(8)
- Postfix discard mail delivery agent
- diskdevstat(8)
- tool for recording harddisk activity
- diskdumpctl(8)
- diskdump controller
- diskdumpfmt(8)
- format dump device/partition
- distcache(8)
- Distributed session caching
- dkim-filter(8)
- DKIM filter for sendmail
- dkim-genkey(8)
- DKIM filter key generation tool
- dkim-stats(8)
- output dkim-milter statistics
- dkim-testkey(8)
- DKIM filter installation test
- dkim-testssp(8)
- DKIM filter ADSP evaluation tool
- dkim_milter_selinux(8)
- Security Enhanced Policy for dkim_milter processes
- dkim_selinux(8)
- Security Enhanced Policy for dkim processes
- dkms(8)
- Dynamic Kernel Module Support
- dlm_controld(8)
- daemon that configures dlm according to cluster events
- dlm_controld_selinux(8)
- Security Enhanced Policy for dlm_controld processes
- dlm_selinux(8)
- Security Enhanced Policy for dlm processes
- dlm_tool(8)
- utility for dlm/dlm_controld daemon
- dm_dso_reg_tool(8)
- utility used to load DSO into dmeventd/register devices with it for monitoring
- dmesg(8)
- print/control kernel ring buffer
- dmesg_selinux(8)
- Security Enhanced Policy for dmesg processes
- dmevent_tool(8)
- utility used to load DSO into dmeventd/register devices with it for monitoring
- dmeventd(8)
- Device-mapper event daemon
- dmidecode(8)
- DMI table decoder
- dmidecode_selinux(8)
- Security Enhanced Policy for dmidecode processes
- dmraid(8)
- discover, configure and activate software RAID
- dmraid.static(8)
- discover, configure and activate software RAID
- dmsetup(8)
- low level logical volume management
- dnet(8)
- dumb networking library test program
- dnscache(8)
- djbdns DNS cache daemon
- dnsmasq(8)
- lightweight DHCP/caching DNS server
- dnsmasq_selinux(8)
- Security Enhanced Policy for dnsmasq processes
- dnssec-dsfromkey(8)
- DNSSEC DS RR generation tool
- dnssec-keyfromlabel(8)
- DNSSEC key generation tool
- dnssec-keygen(8)
- DNSSEC key generation tool
- dnssec-makekeyset(8)
- DNSSEC zone signing tool
- dnssec-revoke(8)
- Set REVOKED bit on DNSSEC key
- dnssec-settime(8)
- Set key timing metadata for DNSSEC key
- dnssec-signkey(8)
- DNSSEC key set signing tool
- dnssec-signzone(8)
- DNSSEC zone signing tool
- dnssec-trigger(8)
- check DNS servers for DNSSEC support/adjust to compensate
- dnsspoof(8)
- forge replies to DNS address/pointer queries
- dnstop(8)
- displays various tables of DNS traffic on your network
- dnstracer(8)
- trace chain of DNS servers to source
- domain(8)
- nnrpd domain resolver
- dosfsck(8)
- check/repair MS-DOS file systems
- dosfslabel(8)
- set/get MS-DOS filesystem label
- dovecot_auth_selinux(8)
- Security Enhanced Policy for dovecot_auth processes
- dovecot_deliver_selinux(8)
- Security Enhanced Policy for dovecot_deliver processes
- dovecot_selinux(8)
- Security Enhanced Policy for dovecot processes
- dpkg-divert(8)
- override package's version of file
- dpkg-statoverride(8)
- override ownership/mode of files
- dpm-rfiod(8)
-
- dracut(8)
- create initial ramdisk images for preloading modules
- dracut-catimages(8)
- creates initial ramdisk image by concatenating images
- dracut-gencmdline(8)
- generates kernel parameters for dracut generated initramfs
- drbd_selinux(8)
- Security Enhanced Policy for drbd processes
- drbdlinks(8)
- manages links into shared DRBD partition
- dropbear(8)
- lightweight SSH2 server
- dropbearkey(8)
- create private keys for use with dropbear
- drpmsync(8)
-
- ds_removal(8)
- Remove directory server instance/un-register it from console
- ds_unregister(8)
- Un-register directory server instance from console
- dsniff(8)
- password sniffer
- dspam_selinux(8)
- Security Enhanced Policy for dspam processes
- dummy-ups(8)
- Driver for multi-purpose UPS emulation
- dump(8)
- ext2/3 filesystem backup
- dump-acct(8)
- print acct/pacct file in human-readable format
- dump-utmp(8)
- print utmp file in human-readable format
- dump_cis(8)
- PCMCIA Card info Structures
- dump_lfts(8)
- dump InfiniBand unicast forwarding tables
- dump_mfts(8)
- dump InfiniBand multicast forwarding tables
- dumpe2fs(8)
- dump ext2/ext3/ext4 filesystem info
- dumpe4fs(8)
- dump ext2/ext3/ext4 filesystem info
- dumpfilter(8)
- create filtered dump file
- e2freefrag(8)
- report free space fragmentation info
- e2fsck(8)
- check ext2/ext3/ext4 file system
- e2image(8)
- Save critical ext2/ext3/ext4 filesystem metadata to file
- e2label(8)
- Change label on ext2/ext3/ext4 filesystem
- e2undo(8)
- Replay undo log for ext2/ext3/ext4 filesystem
- e4fsck(8)
- check ext2/ext3/ext4 file system
- e4image(8)
- Save critical ext2/ext3/ext4 filesystem metadata to file
- e4label(8)
- Change label on ext2/ext3/ext4 filesystem
- e4undo(8)
- Replay undo log for ext2/ext3/ext4 filesystem
- ebtables(8)
- Ethernet bridge frame table administration
- ecryptfs-manager(8)
- eCryptfs key manager
- ecryptfsd(8)
- user-space eCryptfs daemon
- edac-ctl(8)
- EDAC admin utility
- edd_id(8)
- udev callout to identify BIOS disk drives via EDD
- edge(8)
- n2n edge node daemon
- edquota(8)
- edit user quotas
- efibootmgr(8)
- change EFI Boot Manager
- elvtune(8)
- I/O elevator tuner
- enable(8)
- stop/start printers/classes
- entropyd_selinux(8)
- Security Enhanced Policy for entropyd processes
- epylog(8)
- Syslog new log notifier/parser
- error(8)
- Postfix error/retry mail delivery agent
- etapro(8)
- Driver for ETA UPS equipment
- etckeeper(8)
- store /etc in git, mercurial, bazaar, or darcs
- ether-wake(8)
- send Wake-On-LAN Magic Packet
- ethereal_selinux(8)
- Security Enhanced Policy for ethereal processes
- ethtool(8)
- query/control network driver/hardware settings
- ettercap(8)
- multipurpose sniffer/content filter
- ettercap_curses(8)
- Man page for Ncurses GUI
- ettercap_plugins(8)
- collection of plugins for
- etterfilter(8)
- Filter compiler for ettercap content
- etterlog(8)
- Log analyzer for ettercap log files
- eventlogadm(8)
- push records into Samba event log store
- eventlogd_selinux(8)
- Security Enhanced Policy for eventlogd processes
- everups(8)
- Driver for Ever UPS models
- evs_overview(8)
- EvS Library Overview
- evtchnd_selinux(8)
- Security Enhanced Policy for evtchnd processes
- execstack(8)
- set, clear, or query executable stack flag of ELF binaries and shared libraries
- exicyclog(8)
- Cycle exim's logfiles
- exigrep(8)
- Search Exim's main log
- exim(8)
- Mail Transfer Agent
- exim_checkaccess(8)
- Check address acceptance from given IP
- exim_dbmbuild(8)
- Build DBM file
- exim_dumpdb(8)
- Manage Exim's hint databases
- exim_fixdb(8)
- Manage Exim's hint databases
- exim_lock(8)
- Mailbox maintenance
- exim_selinux(8)
- Security Enhanced Policy for exim processes
- exim_tidydb(8)
- Manage Exim's hint databases
- eximon(8)
- Monitor Exim
- eximon.bin(8)
- Monitor Exim
- eximstats(8)
- generates statistics from Exim mainlog/syslog files
- exinext(8)
- Finding individual retry times
- exipick(8)
- selectively display messages from Exim queue
- exiqgrep(8)
- Search in exim queue
- exiqsumm(8)
- Summarising queue
- exiwhat(8)
- Finding out what Exim processes are doing
- expire(8)
- Usenet article/history expiration program
- expireover(8)
- Expire entries from news overview database
- expirerm(8)
- remove articles that have been expired
- exportfs(8)
- maintain table of exported NFS file systems
- ext2online(8)
- online ext2 filesystem resizer
- ext3undel(8)
- collection of scripts to help restoring deleted files from ext2/ext3 file systems
- ez-ipupdate(8)
- dynamic DNS client
- fail2ban(8)
- bans IP that makes too many password failures
- fail2ban_selinux(8)
- Security Enhanced Policy for fail2ban processes
- faillock(8)
- Tool for displaying/modifying authentication failure record files
- faillog(8)
- faillog records/set login failure limits
- fancontrol(8)
- automated software based fan speed regulation
- fawkes(8)
- Main application of Fawkes Robot Software Framework
- faxabort(8)
- tell Hyla FAX server to abort receive
- faxaddmodem(8)
- configure modem for use with Hyla FAX
- faxadduser(8)
- add fax user to permissions file
- faxanswer(8)
- tell Hyla FAX server to answer telephone
- faxconfig(8)
- dynamically change Hyla FAX config parameters
- faxcron(8)
- Hyla FAX routine maintenance script
- faxdeluser(8)
- delete fax user from permissions file
- faxfetch(8)
- file from Hyla FAX server
- faxgetty(8)
- Hyla FAX front-door process
- faxinfo(8)
- print info about received facsimile
- faxlock(8)
- tell Hyla FAX server to switch to LOCKWAIT state
- faxmodem(8)
- dynamically add modem to Hyla FAX server system
- faxmsg(8)
- utility program used by other Hyla FAX client programs
- faxq(8)
- Hyla FAX queue manager process
- faxq-helper(8)
- privileged helper process to access fax queue
- faxqclean(8)
- Hyla FAX queue cleaner process
- faxquit(8)
- tell Hyla FAX server to terminate
- faxrcvd(8)
- Hyla FAX notification script for received facsimile
- faxrunqd(8)
- daemon to send fax jobs queued by faxspool
- faxsend(8)
- Hyla FAX facsimile transmit program
- faxsetup(8)
- setup machine for use with Hyla FAX
- faxsetup.linux(8)
- -specific version of faxsetup
- faxstate(8)
- control ''modem state'' of device used by Hyla FAX
- faxwatch(8)
- monitor low-level Hyla FAX server actions
- fbset(8)
- show/modify frame buffer device settings
- fcnsq(8)
- Fibre Channel Name Server Query Tool
- fcoeadm(8)
- Open-FCoE Administration Tool
- fcoemon(8)
- Open-FCoE service daemon
- fcoemon_selinux(8)
- Security Enhanced Policy for fcoemon processes
- fcping(8)
- Fibre Channel Ping tool
- fcrls(8)
- Fibre Channel Read Link Error Status Block tool
- fdformat(8)
- Low-level formats floppy disk
- fdisk(8)
- Partition table manipulator for
- febootstrap(8)
- Bootstrap basic Fedora system
- febootstrap-install(8)
- Install file in febootstrap root filesystem
- febootstrap-minimize(8)
- Minimize febootstrap image
- febootstrap-run(8)
- Run extra commands in febootstrap root filesystem
- febootstrap-supermin-helper(8)
- Reconstruct initramfs from supermin appliance
- febootstrap-to-initramfs(8)
- Convert febootstrap root to initramfs file
- febootstrap-to-supermin(8)
- Convert febootstrap root to supermin appliance
- febootstrap3(8)
- Bootstrapping tool for creating supermin appliances
- fence(8)
-
- fence_ack_manual(8)
- override fenced fencing operations
- fence_apc(8)
- Fence agent for APC over telnet/ssh
- fence_apc_snmp(8)
- Fence agent for APC over SNMP
- fence_bladecenter(8)
- Fence agent for IBM BladeCenter
- fence_brocade(8)
- Fence agent for Brocade over telnet
- fence_bullpap(8)
- I/O Fencing agent for Bull FAME architecture controlled by PAP management console
- fence_check(8)
- fence config check utility
- fence_cisco_mds(8)
- Fence agent for Cisco MDS
- fence_cisco_ucs(8)
- Fence agent for Cisco UCS
- fence_drac(8)
- fencing agent for Dell Remote Access Card
- fence_drac5(8)
- Fence agent for Dell DRAC CMC/5
- fence_eaton_snmp(8)
- Fence agent for Eaton over SNMP
- fence_egenera(8)
- I/O Fencing agent for Egenera BladeFrame
- fence_eps(8)
- Fence agent for ePowerSwitch
- fence_gnbd(8)
- I/O Fencing agent for GNBD-based GFS clusters
- fence_hpblade(8)
- Fence agent for HP BladeSystem
- fence_ibmblade(8)
- Fence agent for IBM BladeCenter over SNMP
- fence_idrac(8)
- Fence agent for IPMI over LAN
- fence_ifmib(8)
- Fence agent for IF MIB
- fence_ilo(8)
- Fence agent for HP iLO
- fence_ilo2(8)
- Fence agent for HP iLO
- fence_ilo3(8)
- Fence agent for IPMI over LAN
- fence_ilo_mp(8)
- Fence agent for HP iLO MP
- fence_imm(8)
- Fence agent for IPMI over LAN
- fence_intelmodular(8)
- Fence agent for Intel Modular
- fence_ipdu(8)
- Fence agent for iPDU over SNMP
- fence_ipmilan(8)
- Fence agent for IPMI over LAN
- fence_kdump(8)
- fencing agent for use with kdump crash recovery service
- fence_kdump_send(8)
- send kdump acknowlegement message to cluster nodes
- fence_legacy(8)
- Part of Pacemaker cluster resource manager
- fence_lpar(8)
- Fence agent for IBM LPAR
- fence_manual(8)
- program run by fenced as part of manual I/O
- fence_mcdata(8)
- I/O Fencing agent for McData FC switches
- fence_node(8)
- utility to run fence agents
- fence_pcmk(8)
- Part of Pacemaker cluster resource manager
- fence_rhevm(8)
- Fence agent for RHEV-M REST API
- fence_rib(8)
- I/O Fencing agent for Compaq Remote Insight Lights
- fence_rps10(8)
- Fence agent for WTI RPS-10 over serial port
- fence_rsa(8)
- Fence agent for IBM RSA
- fence_rsb(8)
- I/O Fencing agent for Fujitsu-Siemens RSB
- fence_sanbox2(8)
- Fence agent for QLogic SANBox2 FC switches
- fence_sanlock(8)
- fence agent using watchdog/shared storage leases
- fence_sanlockd(8)
- daemon for fence_sanlock agent
- fence_scsi(8)
- I/O fencing agent for SCSI persistent reservations
- fence_scsi_test(8)
- Test for SCSI persistent reservation fencing
- fence_tool(8)
- utility for fenced daemon
- fence_virsh(8)
- Fence agent for virsh
- fence_virt(8)
- Fencing agent for virtual machines using VM Channel
- fence_virtd(8)
- Fencing host for virtual machines
- fence_vixel(8)
- I/O Fencing agent for Vixel FC switches
- fence_vmware(8)
- Fence agent for VMWare
- fence_vmware_soap(8)
- Fence agent for VMWare over SOAP API
- fence_wti(8)
- Fence agent for WTI
- fence_xvm(8)
- Fencing agent for virtual machines using VM Channel
- fence_xvmd(8)
- Libvirt-based, general purpose fencing host for virtual machines
- fenced(8)
- I/O Fencing daemon
- fenced_selinux(8)
- Security Enhanced Policy for fenced processes
- fetch-crl(8)
- certificate revocation lists
- fetchipac(8)
- ip accounting kernel data/database handler
- fetchmail_selinux(8)
- Security Enhanced Policy for fetchmail processes
- fetchnews(8)
- fetch news via NNTP
- fidentify(8)
- Recover lost files from harddisk, digital camera and cdrom
- filebucket(8)
-
- filecap(8)
- see capabilities
- filechan(8)
- file-writing backend for InterNetNews
- filefrag(8)
- report on file fragmentation
- filesnarf(8)
- sniff files from NFS traffic
- findchip(8)
- checks FIR chipset
- findfs(8)
- Find filesystem by label/UUID
- findmnt(8)
- find filesystem
- fingerd(8)
- remote user info server
- fingerd_selinux(8)
- Security Enhanced Policy for fingerd processes
- fipvlan(8)
- Fibre Channel over Ethernet VLAN Discovery
- firewalk(8)
- Active Reconnaissance Network Security Tool with Extreme Prejudice
- firewallgui_selinux(8)
- Security Enhanced Policy for firewallgui processes
- firstboot_selinux(8)
- Security Enhanced Policy for firstboot processes
- fixfiles(8)
- fix file SELinux security contexts
- fixmount(8)
- fix remote mount entries
- fixparts(8)
- MBR partition table repair utility
- flashrom(8)
- detect, read, write, verify and erase flash chips
- floppy(8)
- format floppy disks
- flush(8)
- Postfix fast flush server
- fmtutil(8)
- utility for maintaining TeX format files
- foghorn(8)
- D-Bus to SNMP daemon
- foghorn_selinux(8)
- Security Enhanced Policy for foghorn processes
- foomatic-addpjloptions(8)
- Format PJL option info for foomatic database
- foomatic-getpjloptions(8)
- <put short description here>
- foomatic-kitload(8)
- installs data kit into foomatic database
- foomatic-ppdload(8)
- <put short description here>
- foomatic-preferred-driver(8)
- <put short description here>
- foremost(8)
- Recover files using their headers, footers, and data structures
- fos(8)
- failover services daemon to control Red Hat clustering services
- fpga_load(8)
- Xorcom Astribank firmware tool
- fping(8)
- send ICMP ECHO_REQUEST packets to network hosts
- fping6(8)
- send ICMP ECHO_REQUEST packets to network hosts
- fprintd_selinux(8)
- Security Enhanced Policy for fprintd processes
- fragrouter(8)
- network intrusion detection evasion toolkit
- freshclam_selinux(8)
- Security Enhanced Policy for freshclam processes
- frm_admin(8)
- administer file residency parameters
- frm_purged(8)
- File Residency Manager purge daemon
- frm_xfragent(8)
- File Residency Manager Transfer agent
- frm_xfrd(8)
- File Residency Manager transfer daemon
- fruconfig(8)
- Field Replacable Unit config data
- fsadm(8)
- utility to resize/check filesystem on device
- fsadm_selinux(8)
- Security Enhanced Policy for fsadm processes
- fsck(8)
- check/repair file system
- fsck.ext2(8)
- check ext2/ext3/ext4 file system
- fsck.ext3(8)
- check ext2/ext3/ext4 file system
- fsck.ext4(8)
- check ext2/ext3/ext4 file system
- fsck.ext4dev(8)
- check ext2/ext3/ext4 file system
- fsck.gfs2(8)
- Offline GFS/GFS2 file system checker
- fsck.msdos(8)
- check/repair MS-DOS file systems
- fsck.vfat(8)
- check/repair MS-DOS file systems
- fsck.xfs(8)
- do nothing, successfully
- fsdaemon_selinux(8)
- Security Enhanced Policy for fsdaemon processes
- fsfreeze(8)
- suspend access to filesystem
- fsinfo(8)
- coordinate site-wide filesystem info
- fstab-decode(8)
- run command with fstab-encoded arguments
- fstab-sync(8)
- Update /etc/fstab file in response to HAL events
- fstrim(8)
- discard unused blocks on mounted filesystem
- fsystest(8)
- runs frysk's system testsuite
- ftail(8)
- runs Frysk's dogtail testsuite
- ftpd(8)
- DARPA Internet File Transfer Protocol server
- ftpd_selinux(8)
- Security Enhanced Policy for ftpd processes
- ftpdctl(8)
- ProFTPD control program
- ftpdctl_selinux(8)
- Security Enhanced Policy for ftpdctl processes
- ftppr(8)
- FTP proxy gateway service
- ftpscrub(8)
- scrub proftpd scoreboard file of stale entries
- ftpshut(8)
- shut down all proftpd servers at given time
- fud(8)
- provide info about user mailboxes
- funit(8)
- runs frysk's JUnit testsuite
- funit-child(8)
- Slave program for frysk's JUnit tests
- funit-exec(8)
- Slave program for frysk's JUnit tests
- funit-exit(8)
- exits with specified status, or terminates with specified signal
- funit-procmask(8)
- Test processes signal mask for presence of list if signals
- funit-threads(8)
- Slave program for frysk's JUnit tests
- fwlogwatch(8)
- firewall log analyzer/realtime response agent
- fwrestart(8)
- Re-initialize firewall rules, disabling firewall shell session is locked out
- fwsnort(8)
- Firewall Snort
- fxload(8)
- Firmware download to EZ-USB devices
- fxotune(8)
- automatically tune DAHDI FXO channels
- gabi(8)
- undelete deleted files from ext2/ext3 file systems
- gamatronic(8)
- Driver for Gamatronic UPS equipment
- games_selinux(8)
- Security Enhanced Policy for games processes
- garp(8)
- check unused IP addresses/automagically assign them
- gconfd_selinux(8)
- Security Enhanced Policy for gconfd processes
- gconfdefaultsm_selinux(8)
- Security Enhanced Policy for gconfdefaultsm processes
- gdisk(8)
- Interactive GUID partition table manipulator
- gdomap(8)
- GNUstep Distributed Objects name server
- gearmand(8)
- Gearman job server
- genccode(8)
- make C/platform specific assembly code from ICU data file
- gencert(8)
- make test NSS database for mod_nss
- gencmn(8)
- make ICU memory-mappable data file
- genericups(8)
- Driver for contact-closure UPS equipment
- genhomedircon(8)
- make SELinux file context config entries for user home directories
- genpolbools(8)
- Rewrite binary policy with different boolean settings
- genrandom(8)
- make file containing random data
- gensprep(8)
- compile StringPrep data from files filtered by filterRFC3454.pl
- genuca(8)
- create UCA data table
- getc_putc(8)
- test hard drive performance
- getcap(8)
- examine file capabilities
- getenforce(8)
- current mode of SELinux
- getevent(8)
- wait for IPMI events
- getkeycodes(8)
- print kernel scancode-to-keycode mapping table
- getsebool(8)
- SELinux boolean value
- getty_selinux(8)
- Security Enhanced Policy for getty processes
- gfs(8)
-
- gfs2(8)
- GFS2 reference guide
- gfs2_convert(8)
- Convert GFS1 filesystem to GFS2
- gfs2_edit(8)
- Display, print or edit GFS2 or GFS internal structures
- gfs2_fsck(8)
- Offline GFS2 file system checker
- gfs2_grow(8)
- Expand GFS2 filesystem
- gfs2_jadd(8)
- Add journals to GFS2 filesystem
- gfs2_mount(8)
- GFS2 mount options
- gfs2_quota(8)
- change GFS2 disk quotas
- gfs2_tool(8)
- interface to gfs2 ioctl/sysfs calls
- gfs_control(8)
- utility for gfs_controld daemon
- gfs_controld(8)
- daemon that coordinates gfs mounts/recovery
- gfs_controld_selinux(8)
- Security Enhanced Policy for gfs_controld processes
- gfs_edit(8)
- Display/edit GFS internal structures
- gfs_fsck(8)
- Offline GFS file system checker
- gfs_grow(8)
- Expand GFS filesystem
- gfs_jadd(8)
- Add journals to GFS filesystem
- gfs_mkfs(8)
- Make GFS filesystem
- gfs_mount(8)
- GFS mount options
- gfs_quota(8)
- change GFS disk quotas
- gfs_selinux(8)
- Security Enhanced Policy for gfs processes
- gfs_tool(8)
- interface to gfs ioctl calls
- git_shell_selinux(8)
- git_shell user role - Security Enhanced Policy
- gitosis_selinux(8)
- Security Enhanced Policy for gitosis processes
- glance_api_selinux(8)
- Security Enhanced Policy for glance_api processes
- glance_registry_selinux(8)
- Security Enhanced Policy for glance_registry processes
- globus-fork-starter(8)
- Start/monitor fork job
- globus-gatekeeper(8)
- Authorize/execute grid service on behalf of user
- globus-gatekeeper-admin(8)
- Manage globus-gatekeeper services
- globus-gram-audit(8)
- Load GRAM4/GRAM5 audit records into database
- globus-gridftp-password(8)
- creates encrypted password to be used for user of Globus GridFTP server
- globus-gridftp-server(8)
- Globus GridFTP server daemon
- globus-gridftp-server-setup-chroot(8)
- creates specific contents of
- globus-job-manager(8)
- Execute/monitor jobs
- globus-k5(8)
- Acquire Kerberos Credentials for use with Grid Services
- globus-rls-admin(8)
- Replica Location Service Administration
- globus-rls-reporter(8)
- Globus Replica Location Service MDS Reporter
- globus-rls-server(8)
- Replica Location Server
- globus-rvf-check(8)
- Edit GRAM5 RSL validation file
- globus-rvf-edit(8)
- Edit GRAM5 RSL validation file
- globus-update-certificate-dir(8)
- Update symlinks in trusted CA directory
- gluster(8)
- Gluster Console Manager
- glusterd(8)
- Gluster elastic volume management daemon
- glusterd_selinux(8)
- Security Enhanced Policy for glusterd processes
- glusterfs(8)
- clustered file system
- glusterfs-volgen(8)
- make GlusterFS volume files
- glusterfsd(8)
- Clustered Filesystem
- gnbd(8)
-
- gnbd_export(8)
- interface to export GNBDs
- gnbd_import(8)
- change GNBD block devices on client
- gnbd_serv(8)
- gnbd server daemon
- gnokii-smsd(8)
-
- gnokiid(8)
- create virtual modem for old Nokia mobile phones
- gnomeclock_selinux(8)
- Security Enhanced Policy for gnomeclock processes
- gnomesystemmm_selinux(8)
- Security Enhanced Policy for gnomesystemmm processes
- gparted(8)
- Gnome partition editor for manipulating disk partitions
- gpg_agent_selinux(8)
- Security Enhanced Policy for gpg_agent processes
- gpg_helper_selinux(8)
- Security Enhanced Policy for gpg_helper processes
- gpg_selinux(8)
- Security Enhanced Policy for gpg processes
- gpm(8)
- cut/paste utility/mouse server for virtual consoles
- gpm_selinux(8)
- Security Enhanced Policy for gpm processes
- gpsd_selinux(8)
- Security Enhanced Policy for gpsd processes
- gpt-build(8)
- Builds/installs GPT source packages/bundles
- gpt-bundle(8)
- Creates binary/source bundles from installation/collection of source packages
- gpt-config(8)
- Configure current installation of GPT
- gpt-deps(8)
- Reports on installation's package dependencies
- gpt-flavor-configuration(8)
- Permutes build flavor choices found in flavor config file
- gpt-install(8)
- Installs GPT packages
- gpt-pkg(8)
- Creates flavored binary packages out of installation
- gpt-postinstall(8)
- Searches for post install scripts/executes them
- gpt-query(8)
- Queries installation for packages
- gpt-setup(8)
- Create automake/autoconf files to convert software into package
- gpt-undefines(8)
- make list of preprocessor macros not defined
- gpt-uninstall(8)
- Uninstall any GPT package
- gpt-verify(8)
- Verify dependencies needed for Globus are avaliable
- gpt-virtual-pkg(8)
- Link external software into GPT managed installation installation
- gpt_build_config(8)
- Returns minimized list of ldflags from list of globus packages/external libraries
- gpt_extract_data(8)
- Print out package metadata as shell variables
- greylist_milter_selinux(8)
- Security Enhanced Policy for greylist_milter processes
- greylist_selinux(8)
- Security Enhanced Policy for greylist processes
- grid-default-ca(8)
- Select default CA for certificate requests
- grid-mapfile-add-entry(8)
- Add entry to gridmap file
- grid-mapfile-check-consistency(8)
- Add entry to grid map file
- grid-mapfile-delete-entry(8)
- Remove entries from gridmap file
- gridftpd(8)
- ARC GridFTP Server
- gridsite-delegation(8)
- CGI implementation of GridSite/gLite GSI delegation Web Service
- grinder(8)
- Grinder Content Synchronization tool
- group_tool(8)
- run common fence_tool, dlm_tool, gfs_control commands
- groupadd(8)
- create new group
- groupadd_selinux(8)
- Security Enhanced Policy for groupadd processes
- groupd(8)
- compatibility daemon for fenced, dlm_controld and gfs_controld
- groupd_selinux(8)
- Security Enhanced Policy for groupd processes
- groupdel(8)
- delete group
- groupmems(8)
- administer members of user's primary group
- groupmod(8)
- modify group definition on system
- grpck(8)
- verify integrity of group files
- grpconv(8)
- convert to/from shadow passwords/groups
- grpunconv(8)
- convert to/from shadow passwords/groups
- grub(8)
- grub shell
- grub-crypt(8)
- manual page for grub-crypt
- grub-install(8)
- install GRUB on your drive
- grub-md5-crypt(8)
- Encrypt password in MD5 format
- grub-terminfo(8)
- make terminfo command from terminfo name
- grubby(8)
- tool for configuring grub, lilo, and elilo
- gsexec(8)
- Switch user before executing external programs
- gsisftp-server(8)
- SFTP server subsystem
- gsissh-keysign(8)
- ssh helper program for host-based authentication
- gsisshd(8)
- OpenSSH SSH daemon
- gssd(8)
- rpcsec_gss daemon
- gssd_selinux(8)
- Security Enhanced Policy for gssd processes
- guacd(8)
- Guacamole proxy daemon
- guest_selinux(8)
- Least privledge terminal user - Security Enhanced Policy
- gvpe(8)
- GNU Virtual Private Ethernet Daemon
- gvpectrl(8)
- GNU Virtual Private Ethernet Control Program
- hald(8)
- HAL daemon
- hald_acl_selinux(8)
- Security Enhanced Policy for hald_acl processes
- hald_dccm_selinux(8)
- Security Enhanced Policy for hald_dccm processes
- hald_keymap_selinux(8)
- Security Enhanced Policy for hald_keymap processes
- hald_mac_selinux(8)
- Security Enhanced Policy for hald_mac processes
- hald_selinux(8)
- Security Enhanced Policy for hald processes
- hald_sonypic_selinux(8)
- Security Enhanced Policy for hald_sonypic processes
- halt(8)
- reboot/stop system
- haveged(8)
- make random numbers/feed random device
- hb_report(8)
- create report for CRM based clusters
- hciattach(8)
- attach serial devices via UART HCI to BlueZ stack
- hciconfig(8)
- configure Bluetooth devices
- hcid(8)
- Bluetooth Host Controller Interface Daemon
- hcidump(8)
- Parse HCI data
- hdapsd(8)
- park drive in case of emergency
- hddtemp(8)
- Utility to monitor hard drive temperature
- hddtemp_selinux(8)
- Security Enhanced Policy for hddtemp processes
- hdparm(8)
- get/set SATA/IDE device parameters
- heartbeat(8)
- Heartbeat subsystem for High-Availability
- hekafs(8)
- Cloud-enabled File System
- hfaxd(8)
- Hyla FAX client-server protocol server
- hfs_add_directory(8)
- hekafs add directory
- hfs_add_node(8)
- hekafs add node to cluster
- hfs_add_tenant(8)
- hekafs add tenant to cluster
- hfs_add_volume(8)
- hekafs add volume to cluster
- hfs_delete_tenant(8)
- hekafs delete tenant from cluster
- hfs_delete_volume(8)
- hekafs remove volume from cluster
- hfs_enable_tenant(8)
- hekafs enable tenant in cluster
- hfs_list_tenants(8)
- hekafs list tenants in cluster
- hfs_list_volumes(8)
- hekafs list volumes of cluster
- hfs_mount(8)
- hekafs mount volume from cluster
- hfs_start_volume(8)
- hekafs start volume in cluster
- hfs_stop_volume(8)
- hekafs stop volume in cluster
- hfs_update_cert(8)
- hekafs update tenant certificate
- hid2hci(8)
- Bluetooth HID to HCI mode switching utility
- hisaxctrl(8)
- configure HiSax-Module
- hlfsd(8)
- home-link file system daemon
- hostname_selinux(8)
- Security Enhanced Policy for hostname processes
- hotplug(8)
- hotplugging support scripts
- hotplug_selinux(8)
- Security Enhanced Policy for hotplug processes
- howl_selinux(8)
- Security Enhanced Policy for howl processes
- hping(8)
- send arbitrary TCP/IP packets to network hosts
- hping2(8)
- send arbitrary TCP/IP packets to network hosts
- hping3(8)
- send arbitrary TCP/IP packets to network hosts
- hplip_selinux(8)
- Security Enhanced Policy for hplip processes
- htcacheclean(8)
- Clean up disk cache
- htdigconfig(8)
- create fuzzy databases for ht://Dig
- htpdate(8)
- Time synchronization
- httpd(8)
- Apache Hypertext Transfer Protocol Server
- httpd_apcupsd_cgi_script_selinux(8)
- Security Enhanced Policy for httpd_apcupsd_cgi_script processes
- httpd_awstats_script_selinux(8)
- Security Enhanced Policy for httpd_awstats_script processes
- httpd_bugzilla_script_selinux(8)
- Security Enhanced Policy for httpd_bugzilla_script processes
- httpd_cobbler_script_selinux(8)
- Security Enhanced Policy for httpd_cobbler_script processes
- httpd_cvs_script_selinux(8)
- Security Enhanced Policy for httpd_cvs_script processes
- httpd_dirsrvadmin_script_selinux(8)
- Security Enhanced Policy for httpd_dirsrvadmin_script processes
- httpd_dspam_script_selinux(8)
- Security Enhanced Policy for httpd_dspam_script processes
- httpd_git_script_selinux(8)
- Security Enhanced Policy for httpd_git_script processes
- httpd_helper_selinux(8)
- Security Enhanced Policy for httpd_helper processes
- httpd_mediawiki_script_selinux(8)
- Security Enhanced Policy for httpd_mediawiki_script processes
- httpd_munin_script_selinux(8)
- Security Enhanced Policy for httpd_munin_script processes
- httpd_nagios_script_selinux(8)
- Security Enhanced Policy for httpd_nagios_script processes
- httpd_nutups_cgi_script_selinux(8)
- Security Enhanced Policy for httpd_nutups_cgi_script processes
- httpd_openshift_script_selinux(8)
- Security Enhanced Policy for httpd_openshift_script processes
- httpd_php_selinux(8)
- Security Enhanced Policy for httpd_php processes
- httpd_prewikka_script_selinux(8)
- Security Enhanced Policy for httpd_prewikka_script processes
- httpd_rotatelogs_selinux(8)
- Security Enhanced Policy for httpd_rotatelogs processes
- httpd_selinux(8)
- Security Enhanced Policy for httpd processes
- httpd_smokeping_cgi_script_selinux(8)
- Security Enhanced Policy for httpd_smokeping_cgi_script processes
- httpd_squid_script_selinux(8)
- Security Enhanced Policy for httpd_squid_script processes
- httpd_suexec_selinux(8)
- Security Enhanced Policy for httpd_suexec processes
- httpd_sys_script_selinux(8)
- Security Enhanced Policy for httpd_sys_script processes
- httpd_unconfined_script_selinux(8)
- Security Enhanced Policy for httpd_unconfined_script processes
- httpd_user_script_selinux(8)
- Security Enhanced Policy for httpd_user_script processes
- httpd_w3c_validator_script_selinux(8)
- Security Enhanced Policy for httpd_w3c_validator_script processes
- httppower(8)
- communicate with HTTP based power distribution units
- hugeadm(8)
- Configure system huge page pools
- hugectl(8)
- Control policy for backing text, data and malloc() with hugepages
- hugeedit(8)
- Set default policy for backing text/data with hugepages
- hwclock(8)
- query/set hardware clock
- hwclock_selinux(8)
- Security Enhanced Policy for hwclock processes
- hwreset(8)
- perform hardware reset on system
- hwstamp_ctl(8)
- set time stamping policy at driver level
- hylafax(8)
-
- i2c-stub-from-dump(8)
- feed i2c-stub with dump files
- i2cdetect(8)
- detect I2C chips
- i2cdump(8)
- examine I2C registers
- i2cget(8)
- read from I2C/SMBus chip registers
- i2cset(8)
- set I2C registers
- i386(8)
- change reported architecture in new program environment/set personality flags
- ialarms(8)
- display/set alarm indicators
- ibaddr(8)
- query InfiniBand address
- ibcacheedit(8)
- edit ibnetdiscover cache
- ibcheckerrors(8)
- validate IB subnet/report errors
- ibcheckerrs(8)
- validate IB port/report errors in counters
- ibchecknet(8)
- validate IB subnet/report errors
- ibchecknode(8)
- validate IB node/report errors
- ibcheckport(8)
- validate IB port/report errors
- ibcheckportstate(8)
- validate IB port for LinkUp/not Active state
- ibcheckportwidth(8)
- validate IB port for 1x link width
- ibcheckstate(8)
- find ports in IB subnet which are link up but not active
- ibcheckwidth(8)
- find 1x links in IB subnet
- ibclearcounters(8)
- clear port counters in IB subnet
- ibclearerrors(8)
- clear error counters in IB subnet
- ibdatacounters(8)
- query IB subnet for data counters
- ibdatacounts(8)
- IB port data counters
- ibdiscover(8)
- annotate/compare InfiniBand topology
- ibfindnodesusing(8)
- find list of end nodes which are routed through
- ibhosts(8)
- InfiniBand host nodes in topology
- ibidsverify(8)
- validate IB identifiers in subnet/report errors
- iblinkinfo(8)
- report link info for all links in fabric
- ibnetdiscover(8)
- discover InfiniBand topology
- ibnodes(8)
- InfiniBand nodes in topology
- ibping(8)
- ping InfiniBand address
- ibportstate(8)
- handle port state/link speed of InfiniBand
- ibprintca(8)
- print either ca specified/list of cas from
- ibprintrt(8)
- print either only router specified/list of routers
- ibprintswitch(8)
- print either switch specified/list of switches
- ibqueryerrors(8)
- query/report non-zero IB port counters
- ibroute(8)
- query InfiniBand switch forwarding tables
- ibrouters(8)
- InfiniBand router nodes in topology
- ibstat(8)
- query basic status of InfiniBand device
- ibstatus(8)
- query basic status of InfiniBand device
- ibswitches(8)
-
- ibswportwatch(8)
- poll counters on specified switch/port/report rate of change info
- ibsysstat(8)
- system status on InfiniBand address
- ibtracert(8)
-
- iceauth_selinux(8)
- Security Enhanced Policy for iceauth processes
- icecast_selinux(8)
- Security Enhanced Policy for icecast processes
- icmd(8)
- send specific IPMI commands via
- icmpdnd(8)
- ICMP domain name responder
- icmpush(8)
- ICMP packet builder
- icnctrl(8)
- configure ICN ISDN adaptor
- iconfig(8)
- list, save, and restore BMC config parameters
- icqpr(8)
- ICQ proxy
- icupkg(8)
- extract/modify ICU .dat archive
- idcmi(8)
- handle DCMI functions
- idelloem(8)
- OEM commands for Dell servers
- ident(8)
- nnrpd ident resolver
- idiscover(8)
- discover IPMI LAN-enabled nodes
- idled(8)
- provide near real-time updates for IMAP IDLE
- idmap_ad(8)
- Samba's idmap_ad Backend for Winbind
- idmap_adex(8)
- Samba's idmap_adex Backend for Winbind
- idmap_autorid(8)
- Samba's idmap_autorid Backend for Winbind
- idmap_hash(8)
- Samba's idmap_hash Backend for Winbind
- idmap_ldap(8)
- Samba's idmap_ldap Backend for Winbind
- idmap_nss(8)
- Samba's idmap_nss Backend for Winbind
- idmap_rid(8)
- Samba's idmap_rid Backend for Winbind
- idmap_tdb(8)
- Samba's idmap_tdb Backend for Winbind
- idmap_tdb2(8)
- Samba's idmap_tdb2 Backend for Winbind
- idmapd(8)
- NFSv4 ID <-> Name Mapper
- iekanalyzer(8)
- run FRU-Ekeying analyzer with FRU files
- ievents(8)
- decode IPMI/PET event data
- ifcfg(8)
- simplistic script which replaces ifconfig IP managment
- ifconfig(8)
- configure network interface
- ifconfig_selinux(8)
- Security Enhanced Policy for ifconfig processes
- ifdown(8)
- bring network interface up
- ifenslave(8)
- Attach/detach slave network devices to bonding device
- ifinfo(8)
- get network interface info
- ifirewall(8)
- configure IPMI firmware firewall functions
- ifplugd(8)
- link detection daemon for ethernet devices
- ifplugstatus(8)
- link beat detection tool
- ifrename(8)
- rename network interfaces based on various static criteria
- ifru(8)
- Field Replacable Unit config data
- iftop(8)
- bandwidth usage on interface by host
- ifup(8)
- bring network interface up
- ifwum(8)
- Update IPMC using Kontron OEM Firmware Update Manager
- igetevent(8)
- wait for IPMI events
- ihealth(8)
-
- ihpm(8)
- PICMG HPM.1 Upgrade Agent
- iked(8)
- Internet Key Exchange Daemon
- ilan(8)
- show/configure BMC LAN parameters/set up PEF entry to send BMC LAN Alerts for OS Critical Stop log events
- imapd(8)
- IMAP server process
- imon(8)
- watch ISDN activities
- imontty(8)
- status of all ISDN lines
- in.fingerd(8)
- remote user info server
- in.identtestd(8)
- small daemon that can be used to test Ident servers
- in.ntalkd(8)
- remote user communication server
- in.rexecd(8)
- remote execution server
- in.rlogind(8)
- remote login server
- in.rshd(8)
- remote shell server
- in.talkd(8)
- remote user communication server
- in.telnetd(8)
- DARPA telnet protocol server
- in.tftpd(8)
- IPv4 Trivial File Transfer Protocol server
- incrond(8)
- inotify cron daemon
- inetd_child_selinux(8)
- Security Enhanced Policy for inetd_child processes
- inetd_selinux(8)
- Security Enhanced Policy for inetd processes
- infiniband-diags(8)
-
- init(8)
- Upstart process management daemon
- init_selinux(8)
- Security Enhanced Policy for init processes
- initctl(8)
- init daemon control tool
- initrc_selinux(8)
- Security Enhanced Policy for initrc processes
- inncheck(8)
- check inn config/database files
- innd(8)
- InterNetNews daemon
- innd_selinux(8)
- Security Enhanced Policy for innd processes
- inndf(8)
- Report free disk, inodes, and overview info
- inndstart(8)
- Start innd
- innreport(8)
- summarize INN log files
- innstat(8)
- print snapshot of INN system
- innupgrade(8)
- Upgrade INN config files
- innwatch(8)
- monitor innd
- innxbatch(8)
- send xbatched Usenet articles to remote NNTP server
- innxmit(8)
- send Usenet articles to remote NNTP server
- insmod(8)
- insert module into Kernel
- insmod_selinux(8)
- Security Enhanced Policy for insmod processes
- install-catalog(8)
- Manage SGML/XML centralized catalog
- installkernel(8)
- script kernel installation
- interbench(8)
-
- intltool-extract(8)
- make header files which can be read by gettext
- intltool-merge(8)
- merge translated strings into various types of file
- intltool-prepare(8)
- Prepare software to make use of intltool
- intltool-update(8)
- updates PO template file/merge translations with it
- intltoolize(8)
- copy intltool related files to software package
- intro(8)
- introduction to administration/privileged commands
- iodine(8)
- tunnel IPv4 over DNS
- iogen(8)
- I/O generator
- ip(8)
- show/change routing, devices, policy routing and tunnels
- ip6tables(8)
- IPv6 packet filter administration
- ip6tables-1.4.7(8)
- IPv6 packet filter administration
- ip6tables-restore-1.4.7(8)
- Restore IPv6 Tables
- ip6tables-save-1.4.7(8)
- dump iptables rules to stdout
- ipa-upgradeconfig(8)
- Upgrade IPA Apache config
- ipac-convert(8)
- convert ipac accounting data
- ipacsum(8)
- summarize, display and compact ip accounting info
- ipactl(8)
- IPA Server Control Interface
- ipcrm(8)
- remove message queue, semaphore set or shared memory id
- ipcs(8)
- provide info on ipc facilities
- ipicmg(8)
- send specific PICMG extended IPMI commands
- ipmaddr(8)
- adds, deletes, and displays multicast addresses
- ipmi-chassis(8)
- IPMI chassis management utility
- ipmi-chassis-config(8)
- configure chassis fields
- ipmi-fru(8)
- FRU info
- ipmi-locate(8)
- IPMI probing utility
- ipmi-oem(8)
- IPMI OEM utility
- ipmi-raw(8)
- execute IPMI commands by hex values
- ipmi-sel(8)
- SEL entries
- ipmi-sensors(8)
- IPMI sensor info
- ipmi-sensors-config(8)
- configure sensors
- ipmi_port(8)
- daemon to bind RMCP port 623 to prevent portmap from using
- ipmiconsole(8)
- IPMI console utility
- ipmidetect(8)
- detected/undetected IPMI interfaces in cluster
- ipmidetectd(8)
- IPMI node detection monitoring daemon
- ipmievd(8)
- IPMI event daemon for sending events to syslog
- ipmilan(8)
- IPMI LAN to System Interface Converter
- ipmimonitoring(8)
- IPMI monitoring utility
- ipmiping(8)
- send IPMI Get Authentication Capabilitiy request to network hosts
- ipmipower(8)
- IPMI power control utility
- ipmiutil(8)
- meta-command to invoke various IPMI functions
- ipopd(8)
- Post Office Protocol server
- ipppd(8)
- Point to Point Protocol daemon
- ipppstats(8)
- print PPP statistics
- iprofd(8)
- Modem-register daemon
- ipsec(8)
- invoke IPsec utilities
- ipsec__confread(8)
- internal routing to parse config file
- ipsec__copyright(8)
- prints Openswan copyright
- ipsec__include(8)
- process config files
- ipsec__keycensor(8)
- internal routine to remove sensitive info
- ipsec__plutoload(8)
- start pluto
- ipsec__plutorun(8)
- start pluto
- ipsec__realsetup(8)
- internal routine to start Openswan
- ipsec__secretcensor(8)
- internal routing to sanitize files
- ipsec__startklips(8)
- bring up kernel components
- ipsec__startnetkey(8)
- bring up kernel components for netkey
- ipsec__updown(8)
- kernel/routing change script
- ipsec__updown.bsdkame(8)
- bsd change script
- ipsec__updown.klips(8)
- klips change script
- ipsec__updown.mast(8)
- klips change script
- ipsec__updown.netkey(8)
- klips change script
- ipsec_addconn(8)
- load given policy into pluto IKE daemon
- ipsec_auto(8)
- control automatically-keyed IPsec connections
- ipsec_barf(8)
- spew out collected IPsec debugging info
- ipsec_eroute(8)
- change IPSEC extended routing tables
- ipsec_ikeping(8)
- send/receive ISAKMP/IKE echo requests/replies
- ipsec_ipsec(8)
- invoke IPsec utilities
- ipsec_ipsec_pluto(8)
- ipsec whack : IPsec IKE keying daemon/control interface
- ipsec_ipsec_spi(8)
- manage IPSEC Security Associations
- ipsec_klipsdebug(8)
- set KLIPS/MAST debug features/level. Other stacks are not supported
- ipsec_livetest(8)
- see if Openswan has been installed correctly, interacting with test target
- ipsec_look(8)
- quick summary of Openswan status
- ipsec_lwdnsq(8)
- lookup items in DNS to help pluto
- ipsec_mailkey(8)
- mail DNS records for Opportunistic Encryption
- ipsec_manual(8)
- take manually-keyed IPsec connections up/down
- ipsec_mgmt_selinux(8)
- Security Enhanced Policy for ipsec_mgmt processes
- ipsec_newhostkey(8)
- make new raw RSA authentication key for host
- ipsec_pf_key(8)
- shows pfkey messages emitted by kernel when using KLIPS/MAST stack
- ipsec_pluto(8)
- ipsec whack : IPsec IKE keying daemon/control interface
- ipsec_policy(8)
- ipsec policy info
- ipsec_ranbits(8)
- make random bits in ASCII form
- ipsec_readwriteconf(8)
- validate/output Openswan IPsec config file
- ipsec_rsasigkey(8)
- make RSA signature key
- ipsec_secrets(8)
- prompt for PIN codes/passphrases
- ipsec_selinux(8)
- Security Enhanced Policy for ipsec processes
- ipsec_setup(8)
- control IPsec subsystem
- ipsec_showdefaults(8)
- %defaultroute defaults
- ipsec_showhostkey(8)
- host's authentication key
- ipsec_showpolicy(8)
- dump policy of socket found as stdin
- ipsec_spi(8)
- manage IPSEC Security Associations
- ipsec_spigrp(8)
- group/ungroup IPSEC Security Associations
- ipsec_tncfg(8)
- change KLIPS virtual interfaces
- ipsec_verify(8)
- see if FreeSWAN has been installed correctly
- ipset(8)
- administration tool for IP sets
- iptables(8)
- administration tool for IPv4 packet filtering/NAT
- iptables-1.4.7(8)
- administration tool for IPv4 packet filtering/NAT
- iptables-restore(8)
- Restore IP Tables
- iptables-restore-1.4.7(8)
- Restore IP Tables
- iptables-save(8)
- Save IP Tables
- iptables-save-1.4.7(8)
- dump iptables rules to stdout
- iptables-xml-1.4.7(8)
- Convert iptables-save format to XML
- iptables_selinux(8)
- Security Enhanced Policy for iptables processes
- iptraf(8)
- Interactive Colorful IP LAN Monitor
- iptraf-ng(8)
- Interactive Colorful IP LAN Monitor
- iptstate(8)
- top-like display of IP Tables state table entries
- iptunnel(8)
- creates, deletes, and displays configured tunnels
- ipurge(8)
- delete mail from IMAP mailbox/partition based on age/size
- ipv6calc(8)
- small utility written in C to change IPv6 addresses
- ipv6logconv(8)
- small IPv6 log converter written in C
- ipv6logstats(8)
- Takes http log data from stdin/print table on output
- ipvsadm(8)
- Virtual Server administration
- ipvsadm-restore(8)
- restore IPVS table from stdin
- ipvsadm-save(8)
- save IPVS table to stdout
- irattach(8)
- binds -IrDA stack to IrDA port
- irc_selinux(8)
- Security Enhanced Policy for irc processes
- ircd(8)
- IRCD-Hybrid Internet Relay Chat server
- irdadump(8)
- monitors IrDA traffic on one/more links
- irdaping(8)
- sends IrDA test frames
- ireset(8)
- perform hardware reset on system
- irnetd(8)
- Handle automatically incoming IrNET connections
- irpsion5(8)
- IrDA connectivity to Psion V PDA
- irqbalance_selinux(8)
- Security Enhanced Policy for irqbalance processes
- irssi_selinux(8)
- Security Enhanced Policy for irssi processes
- isadump(8)
- examine ISA registers
- isaset(8)
- set ISA registers
- isatapd(8)
- userland ISATAP pseudo-tunnel daemon
- isbmex(8)
- Driver for ISBMEX UPS equipment
- isc-hmac-fixup(8)
- fixes HMAC keys generated by older versions of BIND
- iscsi-iname(8)
- iSCSI initiator name generation tool
- iscsi-target(8)
- service remote iSCSI requests
- iscsiadm(8)
- open-iscsi administration utility
- iscsid(8)
- Open-iSCSI daemon
- iscsid_selinux(8)
- Security Enhanced Policy for iscsid processes
- iscsistart(8)
- iSCSI boot tool
- iscsiuio(8)
- iSCSI UserSpace I/O driver
- isdnctrl(8)
- get/set ISDN device info
- isdnlog(8)
- isdn log system
- isel(8)
- firmware System Event Log records
- isensor(8)
- Sensor Data Records
- iserial(8)
- configure system for Serial/EMP management functions, such as Terminal Mode, and share port with Serial Console
- isisd(8)
- IS-IS routing engine for use with Quagga routing software
- isnsadm(8)
- iSNS client utility
- isnsd(8)
- iSNS server daemon
- isnsdd(8)
- iSNS discovery daemon
- iso8601(8)
- Part of Pacemaker cluster resource manager
- isoinfo(8)
- Utility programs for dumping/verifying iso9660 images
- isol(8)
- IPMI Serial-Over-LAN Console application
- isolconsole(8)
- IPMI Serial-Over-LAN Console application
- isosize(8)
- outputs length of iso9660 file system
- isunoem(8)
- OEM commands for Sun servers
- itsol(8)
- Tyan IPMIv1.5 Serial-Over-LAN Console application
- ivtscd(8)
- driver for IVT Solar Controller Device
- iw(8)
- show/change wireless devices/their config
- iwconfig(8)
- configure wireless network interface
- iwdt(8)
-
- iwevent(8)
- Wireless Events generated by drivers/setting changes
- iwgetid(8)
- Report ESSID, NWID or AP/Cell Address of wireless network
- iwhd_selinux(8)
- Security Enhanced Policy for iwhd processes
- iwlist(8)
- more detailed wireless info from wireless interface
- iwpriv(8)
- configure optionals parameters of wireless network interface
- iwspy(8)
- wireless statistics from specific nodes
- jabberd(8)
- jabberd startup script
- jabberd_router_selinux(8)
- Security Enhanced Policy for jabberd_router processes
- jabberd_selinux(8)
- Security Enhanced Policy for jabberd processes
- jailkit(8)
- utilities for jailing user/process
- janitor(8)
- ARC Dynamic Runtime Environment Maintenance
- java_selinux(8)
- Security Enhanced Policy for java processes
- jetpipe(8)
- bind printer device to tcp port
- jk_addjailuser(8)
- utility to add new user to password database in /etc/ as well as in JAIL/etc/
- jk_check(8)
- utility that will check jail for security problems
- jk_chrootlaunch(8)
- launcher that can start deamon in jail, with
- jk_chrootsh(8)
- shell that will put user inside changed root
- jk_cp(8)
- utility to copy files including permissions/libraries
- jk_init(8)
- utility to quicky create functional jail directories
- jk_jailuser(8)
- utility to put existing user in jail
- jk_list(8)
- utility to list all processes in chroot jail
- jk_lsh(8)
- shell that limits binaries it will execute
- jk_procmailwrapper(8)
- wrapper to prevent procmail execution by jailed
- jk_socketd(8)
- daemon to create rate-limited /dev/log socket inside
- jk_uchroot(8)
- grant regular users right to change root into certain
- jk_update(8)
- utility to update/cleanup jail according to changes on real system
- jnettop(8)
- View hosts/ports taking up most network traffic
- jobcontrol(8)
- per-job controls for Hyla FAX servers
- k5srvutil(8)
- host key table change utility
- kadmin(8)
- Kerberos database administration program
- kadmin.local(8)
- Kerberos database administration program
- kadmind(8)
- KADM5 administration server
- kadmind_selinux(8)
- Security Enhanced Policy for kadmind processes
- kannel(8)
- Parts of Kannel, WAP and SMS gateway
- kbdrate(8)
- reset keyboard repeat rate/delay time
- kbuildsycoca4(8)
- Rebuilds system config cache
- kcookiejar4(8)
- KDE HTTP cookie daemon
- kdb5_ldap_util(8)
- Kerberos config Utility
- kdb5_util(8)
- Kerberos database maintenance utility
- kded4(8)
- KDE daemon - triggers Sycoca database updates when needed
- kdeinit4(8)
- Start all other KDE programs/kdeinit loadable modules
- kdump_selinux(8)
- Security Enhanced Policy for kdump processes
- kdumpgui_selinux(8)
- Security Enhanced Policy for kdumpgui processes
- keepalived(8)
- keepalive demon
- kerberos_selinux(8)
- Security Enhanced Policy for Kerberos
- kerneloops(8)
- collect/submit kernel oopses to kerneloops.org
- kerneloops_selinux(8)
- Security Enhanced Policy for kerneloops processes
- kexec(8)
- directly boot into new kernel
- keyclient(8)
- make/distribute keys on behalf of Pubcookie
- keyserver(8)
- make/distribute keys on behalf of Pubcookie
- keystone_selinux(8)
- Security Enhanced Policy for keystone processes
- killall5(8)
- send signal to all processes
- killpgrp(8)
- kill all processes in same process group
- kismet_selinux(8)
- Security Enhanced Policy for kismet processes
- klogd(8)
- Kernel Log Daemon
- klogd_selinux(8)
- Security Enhanced Policy for klogd processes
- klogind(8)
- remote login server
- kobil_midentity_switch(8)
- activate mIDentity CCID reader
- kpartx(8)
- Create device maps from partition tables
- kprop(8)
- propagate Kerberos principal database to slave server
- kpropd(8)
- Kerberos slave KDC update server
- kpropd_selinux(8)
- Security Enhanced Policy for kpropd processes
- kproplog(8)
- contents of Kerberos principal update log
- krb524d(8)
- to Credentials Conversion Daemon
- krb5kdc(8)
- Kerberos KDC
- krb5kdc_selinux(8)
- Security Enhanced Policy for krb5kdc processes
- kshd(8)
- kerberized remote shell server
- ksmtuned_selinux(8)
- Security Enhanced Policy for ksmtuned processes
- ktalkd_selinux(8)
- Security Enhanced Policy for ktalkd processes
- ktutil(8)
- Kerberos keytab file maintenance utility
- kudzu(8)
- detects/configures new/changed hardware on system
- kudzu_selinux(8)
- Security Enhanced Policy for kudzu processes
- l2ping(8)
- Send L2CAP echo request/receive answer
- l2tpd_selinux(8)
- Security Enhanced Policy for l2tpd processes
- laptop-mode.conf(8)
- config file for laptop-mode-tools/laptop_mode control script
- laptop_mode(8)
- start/stop laptop mode
- lastlog(8)
- reports most recent login of all users/of given user
- latencytop(8)
- tool for developers to visualize system latencies
- latencytop-tui(8)
- tool for developers to visualize system latencies
- lcap(8)
- remove kernel capabilities
- ld-linux(8)
- dynamic linker/loader
- ld-linux.so(8)
- dynamic linker/loader
- ld.so(8)
- dynamic linker/loader
- ldattach(8)
- attach line discipline to serial line
- ldconfig(8)
- configure dynamic linker run-time bindings
- ldconfig_selinux(8)
- Security Enhanced Policy for ldconfig processes
- lde(8)
- curses based file system viewer/editor for
- leafnode(8)
- NNTP server for small sites
- ledctl(8)
- Intel LED control application for storage enclosures
- ledmon(8)
- Intel LED monitor service for storage enclosures
- lfc-dli(8)
- start LFC Data Location Interface server
- lft(8)
- route packets take to network host/socket using one of several layer-4 protocols/methods; show heuristic network info in transitu
- libntfs(8)
- library for accessing/managing NTFS volumes
- libntfs-gnomevfs(8)
- Module for GNOME VFS that allows access to NTFS filesystems
- librados-config(8)
- librados
- libvirt_selinux(8)
- Security Enhanced Policy for virtd processes
- libvirtd(8)
- libvirtd management daemon
- liebert(8)
- Driver for Liebert contact-closure UPS equipment
- liebert-esp2(8)
- Driver for Liebert UPS, using ESP-II serial protocol
- liebertgxt2(8)
- Driver for Liebert GXT2 UPS, using ESP2 serial protocol
- lighttpd(8)
- fast, secure and flexible web server
- lilo(8)
- install boot loader
- linux-user-chroot(8)
- safely allow normal users to chroot
- linux32(8)
- change reported architecture in new program environment/set personality flags
- linux64(8)
- change reported architecture in new program environment/set personality flags
- lircd(8)
- LIRC daemon decodes infrared signals/provides them on Unix domain socket
- lircd_selinux(8)
- Security Enhanced Policy for lircd processes
- lircmd(8)
- LIRC mouse daemon translates infrared signals into mouse events
- livecd-creator(8)
- creates live CD/DVD images
- livecd-iso-to-disk(8)
- installs bootable CD images on USB storage devices
- livecd_selinux(8)
- Security Enhanced Policy for livecd processes
- lldpad(8)
- Link Layer Discovery Protocol agent daemon
- lldpad_selinux(8)
- Security Enhanced Policy for lldpad processes
- lldptool(8)
- manage LLDP settings/status of lldpad
- lldptool-app(8)
- Show/change APP TLV config
- lldptool-ets(8)
- Show/change ETS TLV config
- lldptool-evb(8)
- Show/change EVB TLV config
- lldptool-med(8)
- Show/change MED TLV configurations
- lldptool-pfc(8)
- Show/change PFC TLV config
- lldptool-vdp(8)
- Show/change VDP TLV config
- lm-profiler(8)
- laptop mode profiler
- lm-profiler.conf(8)
- config file for lm-profiler, profiler for laptop-mode-tools
- lm-syslog-setup(8)
- configure laptop mode to switch syslog.conf based on power state
- lmtp(8)
- Postfix SMTP+LMTP client
- lmtpd(8)
- LMTP server process
- lnstat(8)
- unified network statistics
- load_policy(8)
- load new SELinux policy into kernel
- load_policy_selinux(8)
- Security Enhanced Policy for load_policy processes
- load_selinux(8)
- Security Enhanced Policy for load processes
- loadkeys_selinux(8)
- Security Enhanced Policy for loadkeys processes
- loadunimap(8)
- load kernel unicode-to-font mapping table
- local(8)
- Postfix local mail delivery
- locate_selinux(8)
- Security Enhanced Policy for locate processes
- lockd(8)
- start kernel lockd process
- lockdev(8)
-
- lockdev_selinux(8)
- Security Enhanced Policy for lockdev processes
- lockname(8)
- program invoked by faxaddmodem/probemodem to make UUCP lock filename according to SVR4 conventions
- logadm_selinux(8)
- Log administrator role - Security Enhanced Policy
- logcheck(8)
- scan system logs for interesting lines
- login.krb5(8)
- kerberos enhanced login program
- logrotate(8)
- rotates, compresses, and mails system logs
- logrotate_selinux(8)
- Security Enhanced Policy for logrotate processes
- logsave(8)
- save output of command in logfile
- logsys_overview(8)
- Logsys Library Overview
- logtail(8)
- print log file lines that have not been read
- logtail2(8)
- print log file lines that have not been read
- logwatch(8)
- system log analyzer/reporter
- logwatch_selinux(8)
- Security Enhanced Policy for logwatch processes
- loopctrl(8)
- configure isdnloop ISDN driver
- losetup(8)
- set up/control loop devices
- lpadmin(8)
- configure cups printers/classes
- lpc-cups(8)
- line printer control program
- lpd_selinux(8)
- Security Enhanced Policy for lpd processes
- lpinfo(8)
- available devices/drivers
- lpmove(8)
- move job/all jobs to new destination
- lpr_selinux(8)
- Security Enhanced Policy for lpr processes
- lrmadmin(8)
- Part of Pacemaker cluster resource manager
- lsassd_selinux(8)
- Security Enhanced Policy for lsassd processes
- lsblk(8)
- block devices
- lsdahdi(8)
- all dahdi channels with their types/spans
- lsdev(8)
- installed hardware
- lslk(8)
- local locks
- lsmod(8)
- show status of modules in Kernel
- lsof(8)
- open files
- lspci(8)
- all PCI devices
- lspcmcia(8)
- extended PCMCIA debugging info
- lsscsi(8)
- SCSI devices/their attribs
- lsusb(8)
- USB devices
- ltsp-build-client(8)
- Builds LTSP client system for use with LTSP server
- ltsp-chroot(8)
- Chroots into specific LTSP thin client chroot
- ltsp-config(8)
- Configure certain parts of LTSP server
- ltsp-update-image(8)
- make NBD image from LTSP chroot
- ltsp-update-kernels(8)
- Copy LTSP chroot kernels to TFTP directories
- ltsp-update-sshkeys(8)
- Update LTSP chroots to trust server ssh keys
- lttng-sessiond(8)
- LTTng 2.0 central tracing registry session daemon
- luci_admin(8)
- luci config/backup tool
- lvchange(8)
- change attribs of logical volume
- lvconvert(8)
- convert logical volume from linear to mirror/snapshot
- lvcreate(8)
- create logical volume in existing volume group
- lvdisplay(8)
- attribs of logical volume
- lvextend(8)
- extend size of logical volume
- lvm(8)
- LVM2 tools
- lvm_selinux(8)
- Security Enhanced Policy for lvm processes
- lvmchange(8)
- change attribs of logical volume manager
- lvmconf(8)
- LVM config modifier
- lvmdiskscan(8)
- scan for all devices visible to LVM2
- lvmdump(8)
- create lvm2 info dumps for diagnostic purposes
- lvmetad(8)
- LVM metadata cache daemon
- lvmsadc(8)
- LVM system activity data collector
- lvmsar(8)
- LVM system activity reporter
- lvreduce(8)
- reduce size of logical volume
- lvremove(8)
- remove logical volume
- lvrename(8)
- rename logical volume
- lvresize(8)
- resize logical volume
- lvs(8)
- report info about logical volumes
- lvscan(8)
- scan for Logical Volumes
- lvsd(8)
- daemon to control Red Hat clustering services
- lwiod_selinux(8)
- Security Enhanced Policy for lwiod processes
- lwregd_selinux(8)
- Security Enhanced Policy for lwregd processes
- lwresd(8)
- lightweight resolver daemon
- lwsmd_selinux(8)
- Security Enhanced Policy for lwsmd processes
- macof(8)
- flood switched LAN with random MAC addresses
- magicfilter(8)
- automatic configurable printer filter
- mailman_cgi_selinux(8)
- Security Enhanced Policy for mailman_cgi processes
- mailman_mail_selinux(8)
- Security Enhanced Policy for mailman_mail processes
- mailman_queue_selinux(8)
- Security Enhanced Policy for mailman_queue processes
- mailman_selinux(8)
- Security Enhanced Policy for mailman processes
- mailpost(8)
- feed email message into news group
- mailsnarf(8)
- sniff mail messages in Berkeley mbox format
- mailstats(8)
- mail statistics
- make_md5(8)
- make MD5 checksums for given set of users
- make_sha1(8)
- make SHA1 checksums for given set of users
- makedbm(8)
- create/dump ypserv database file
- makedbz(8)
- rebuild dbz files
- makedeltaiso(8)
- create deltaiso from two isos
- makedeltarpm(8)
- create deltarpm from two rpms
- makedev(8)
- create devices
- makedumpfile(8)
- make small dumpfile of kdump
- makehistory(8)
- Initialize/rebuild INN history database
- makemap(8)
- create database maps for sendmail
- makewhatis(8)
- Create whatis database
- mapscrn(8)
- load screen output mapping table
- massagevendor(8)
- convert ethernet vendor codes master list to arpwatch format
- master(8)
- Postfix master process
- masterguard(8)
- Driver for Masterguard UPS equipment
- matahari_hostd_selinux(8)
- Security Enhanced Policy for matahari_hostd processes
- matahari_netd_selinux(8)
- Security Enhanced Policy for matahari_netd processes
- matahari_rpcd_selinux(8)
- Security Enhanced Policy for matahari_rpcd processes
- matahari_selinux(8)
- Security Enhanced Policy for matahari processes
- matahari_serviced_selinux(8)
- Security Enhanced Policy for matahari_serviced processes
- matahari_sysconfigd_selinux(8)
- Security Enhanced Policy for matahari_sysconfigd processes
- matchpathcon(8)
- default SELinux security context for specified path from file contexts config
- mbexamine(8)
- examine cyrus-format mailbox
- mbpath(8)
- translate mailbox names to filesystem paths
- mce-inject(8)
- Inject machine checks into x86 kernel for testing
- mcelog(8)
- Decode kernel machine check log on x86 machines
- mcelog_selinux(8)
- Security Enhanced Policy for mcelog processes
- mcs(8)
- Multi-Category System
- mcstransd(8)
- MCS daemon. Translates SELinux MCS/MLS labels to human readable form
- md-mx-ctrl(8)
- Control mimedefang-multiplexor
- mdadm(8)
- manage MD devices aka Software RAID
- mdadm_selinux(8)
- Security Enhanced Policy for mdadm processes
- mdassemble(8)
- assemble MD devices aka Software Raid
- mdmon(8)
- monitor MD external metadata arrays
- mdmpd(8)
- daemon to monitor MD multipath devices
- megatec(8)
- Driver for Megatec protocol based UPS equipment
- megatec_usb(8)
- Driver for Megatec protocol based USB UPS equipment
- meinproc4(8)
- KDE translator for XML
- memcached_selinux(8)
- Security Enhanced Policy for memcached processes
- memlockd(8)
- daemon to lock files in memory with mlock
- memtester(8)
- stress test to find memory subsystem faults
- mencoder_selinux(8)
- Security Enhanced Policy for mencoder processes
- mergerepo_c(8)
- C implementation of mergerepo
- metasys(8)
- Driver for Meta System UPS equipment
- mfscgiserv(8)
- start HTTP/CGI server for Moose File System monitoring
- mfschunkserver(8)
- start, restart or stop Moose File System chunkserver process
- mfsmaster(8)
- start, restart or stop Moose File System master process
- mfsmetalogger(8)
- start, restart or stop Moose File System metalogger process
- mfsmetarestore(8)
- replay MooseFS metadata change logs/dump MooseFS metadata image
- mfsmount(8)
- mount Moose File System
- mge-shut(8)
- Driver for SHUT Protocol UPS equipment
- mge-utalk(8)
- Driver for MGE UPS SYSTEMS UTalk protocol equipment
- mgetty(8)
- smart modem getty
- mgnokiidev(8)
- links /dev/gnokii to virtual modem
- microcode_ctl(8)
- microcode utility for Intel IA32 processors
- microdowell(8)
- Driver for Microdowell Enterprise UPS series
- migrate-ds-admin.pl(8)
- Admin Server/Directory Server Migration script
- migrate-ds.pl(8)
- Directory Server Migration script
- migratepages(8)
- Migrate physical location processes pages
- migspeed(8)
- Test speed of page migration
- mii-diag(8)
- Network adapter control/monitoring
- mii-tool(8)
- view, change media-independent interface status
- milter-greylist(8)
- grey listing filter for sendmail
- milter-regex(8)
- sendmail milter plugin for regex filtering
- mimedefang(8)
- Sendmail MIME mail filter
- mimedefang-multiplexor(8)
- Process pool controller for mail filters
- mimedefang.pl(8)
- scan MIME messages
- mindi(8)
- tool for creating boot/root disks
- mingetty(8)
- minimal getty for consoles
- miredo(8)
- Teredo IPv6 tunneling for Unix
- miredo-checkconf(8)
- Miredo config file syntax checking tool
- miredo-server(8)
- Teredo server for Unix
- mk-amd-map(8)
- create database maps for Amd
- mkbiarch(8)
- make multiple architecture Live boot disk image for USB, CF SSD or any disk from 2 architecturally different LiveCD ISO9660 image files
- mkbootdisk(8)
- creates stand-alone boot floppy for running system
- mkcdrec(8)
- Make CD-ROM Recovery tool
- mkcephfs(8)
- create ceph file system
- mkcover(8)
- Hyla FAX continuation cover page generation command
- mkdosfs(8)
- create MS-DOS file system under
- mkdumprd(8)
- creates initial ramdisk images for kdump crash recovery
- mke2fs(8)
- create ext2/ext3/ext4 filesystem
- mke4fs(8)
- create ext2/ext3/ext4 filesystem
- mkfontdesc(8)
- utility to create PK font description files
- mkfs(8)
- build file system
- mkfs.btrfs(8)
- create btrfs filesystem
- mkfs.ext2(8)
- create ext2/ext3/ext4 filesystem
- mkfs.ext3(8)
- create ext2/ext3/ext4 filesystem
- mkfs.ext4(8)
- create ext2/ext3/ext4 filesystem
- mkfs.ext4dev(8)
- create ext2/ext3/ext4 filesystem
- mkfs.gfs2(8)
- Make GFS2 filesystem
- mkfs.msdos(8)
- create MS-DOS file system under
- mkfs.ntfs(8)
- create NTFS file system
- mkfs.reiserfs(8)
- reiserfs filesystem creation program
- mkfs.vfat(8)
- create MS-DOS file system under
- mkfs.xfs(8)
- construct XFS filesystem
- mkhomedir_helper(8)
- Helper binary that creates home directories
- mkinitrd(8)
- creates initial ramdisk images for preloading modules
- mkisofs(8)
- create hybrid ISO9660/JOLIET/HFS filesystem with optional Rock Ridge attribs
- mklost+found(8)
- create lost+found directory on mounted EXT2
- mknetid(8)
- make data for netid map
- mkntfs(8)
- create NTFS file system
- mkqdisk(8)
- Cluster Quorum Disk Utility
- mkrescue(8)
- make rescue floppy
- mkswap(8)
- set up swap area
- mkudffs(8)
- create UDF filesystem
- mkzonedb(8)
- Utility create zone file for isdnlog
- mod-active(8)
- batch processing of ctlinnd newgroup/rmgroup/changegroup
- mod_gridsite(8)
- Grid extensions to Apache httpd
- mode3(8)
- set vesa mode
- modemmanager_selinux(8)
- Security Enhanced Policy for modemmanager processes
- modinfo(8)
- show info about Kernel module
- modprobe(8)
- add/remove modules from Kernel
- module_upgrade(8)
- changes obsolete modules.conf entries to current ones
- mon(8)
- monitor services for availability, sending alarms upon failures
- mondoarchive(8)
- backup/disaster-recovery tool
- mondorestore(8)
- restore/disaster-recovery tool
- mongod_selinux(8)
- Security Enhanced Policy for mongod processes
- monitorix(8)
-
- monmaptool(8)
- ceph monitor cluster map change tool
- mono_selinux(8)
- Security Enhanced Policy for mono processes
- mount(8)
- mount filesystem
- mount.ceph(8)
- mount ceph file system
- mount.cifs(8)
- mount using Common Internet File System
- mount.davfs(8)
- Mount WebDAV resource in directory
- mount.ecryptfs(8)
- eCryptfs mount helper
- mount.gfs2(8)
- GFS2 mount options
- mount.glusterfs(8)
- mount native GlusterFS volume
- mount.lowntfs-3g(8)
- Third Generation Read/Write NTFS Driver
- mount.nfs(8)
- mount Network File System
- mount.nfs4(8)
- mount Network File System
- mount.ntfs-3g(8)
- Third Generation Read/Write NTFS Driver
- mount_selinux(8)
- Security Enhanced Policy for mount processes
- mountd(8)
- NFS mount daemon
- mountstats(8)
- Displays NFS client per-mount statistics
- mozilla_plugin_config_selinux(8)
- Security Enhanced Policy for mozilla_plugin_config processes
- mozilla_plugin_selinux(8)
- Security Enhanced Policy for mozilla_plugin processes
- mozilla_selinux(8)
- Security Enhanced Policy for mozilla processes
- mpath_prio_alua(8)
- Path priority tool based on Asymmetric LUn Access
- mpathconf(8)
- tool for configuring device-mapper-multipath
- mpathpersist(8)
-
- mpd_selinux(8)
- Security Enhanced Policy for mpd processes
- mplayer_selinux(8)
- Security Enhanced Policy for mplayer processes
- mpxstats(8)
- Multiplexing Monitor Statistics daemon
- mrtg_selinux(8)
- Security Enhanced Policy for mrtg processes
- msgsnarf(8)
- sniff chat messages
- mtr(8)
- network diagnostic tool
- mtree(8)
- map directory hierarchy
- multipath(8)
- Device mapper target autoconfig
- multipathd(8)
- multipath daemon
- munged(8)
- MUNGE daemon
- munin(8)
- Munin manpage hub
- munin-check(8)
- fix permissions of Munin directories/files
- munin-cron(8)
- batch other Munin master programs
- munin-graph(8)
-
- munin-html(8)
- make html-pages in Munin installation
- munin-limits(8)
- check for any off-limit values
- munin-node(8)
- daemon to gather info in cooperation with main Munin program
- munin-node-configure(8)
- view configurations for munin-node
- munin-node-configure-snmp(8)
- sub-program used by munin-node-configure to do actual SNMP probing
- munin-run(8)
- run munin-node plugins from
- munin-update(8)
- gather data from machines running munin-node
- munin_disk_plugin_selinux(8)
- Security Enhanced Policy for munin_disk_plugin processes
- munin_mail_plugin_selinux(8)
- Security Enhanced Policy for munin_mail_plugin processes
- munin_selinux(8)
- Security Enhanced Policy for munin processes
- munin_selinux_plugin_selinux(8)
- Security Enhanced Policy for munin_selinux_plugin processes
- munin_services_plugin_selinux(8)
- Security Enhanced Policy for munin_services_plugin processes
- munin_system_plugin_selinux(8)
- Security Enhanced Policy for munin_system_plugin processes
- munin_unconfined_plugin_selinux(8)
- Security Enhanced Policy for munin_unconfined_plugin processes
- mydns(8)
- SQL-based Internet name daemon
- mydns-conf(8)
- Sets up MyDNS service
- mydnscheck(8)
- Check zone data for consistency/syntax
- mydnsexport(8)
- Output zone data in various foreign file formats
- mydnsimport(8)
- Import zone data from external sources
- myproxy-admin-addservice(8)
- add user/service credential
- myproxy-admin-adduser(8)
- add user/service credential
- myproxy-admin-change-pass(8)
- change credential passphrase
- myproxy-admin-load-credential(8)
- directly load repository
- myproxy-admin-query(8)
- query MyProxy repository contents
- myproxy-replicate(8)
- Stores data from MyProxy master repository to all slave servers
- myproxy-server(8)
- store credentials in online repository
- mysqld(8)
- MySQL server
- mysqld_safe_selinux(8)
- Security Enhanced Policy for mysqld_safe processes
- mysqld_selinux(8)
- Security Enhanced Policy for mysqld processes
- mysqlmanager(8)
- MySQL Instance Manager
- mysqlmanagerd_selinux(8)
- Security Enhanced Policy for mysqlmanagerd processes
- nagios_admin_plugin_selinux(8)
- Security Enhanced Policy for nagios_admin_plugin processes
- nagios_checkdisk_plugin_selinux(8)
- Security Enhanced Policy for nagios_checkdisk_plugin processes
- nagios_eventhandler_plugin_selinux(8)
- Security Enhanced Policy for nagios_eventhandler_plugin processes
- nagios_mail_plugin_selinux(8)
- Security Enhanced Policy for nagios_mail_plugin processes
- nagios_selinux(8)
- Security Enhanced Policy for nagios processes
- nagios_services_plugin_selinux(8)
- Security Enhanced Policy for nagios_services_plugin processes
- nagios_system_plugin_selinux(8)
- Security Enhanced Policy for nagios_system_plugin processes
- nagios_unconfined_plugin_selinux(8)
- Security Enhanced Policy for nagios_unconfined_plugin processes
- named(8)
- Internet domain name server
- named-checkconf(8)
- named config file syntax checking tool
- named-checkzone(8)
- zone file validity checking/converting tool
- named-compilezone(8)
- zone file validity checking/converting tool
- named-journalprint(8)
- print zone journal in human-readable form
- named_selinux(8)
- Security Enhanced Policy for named processes
- nameif(8)
- name network interfaces based on MAC addresses
- namespace_init_selinux(8)
- Security Enhanced Policy for namespace_init processes
- namespace_selinux(8)
- Security Enhanced Policy for namespace processes
- nanny(8)
- monitor status of services in cluster
- nash(8)
- script interpretor to interpret linuxrc images
- nbdrootd(8)
- Serve out LTSP images created with ltsp-update-image
- nbdswapd(8)
- dynamically create swap files on request export with nbd-server instance
- ncftool_selinux(8)
- Security Enhanced Policy for ncftool processes
- ncidd(8)
- Network Caller ID Server
- ncidsip(8)
- Inject CID info by snooping SIP invites
- ncrypt(8)
- NMRC File Encryptor/Decryptor/Wiper
- ncsa_auth(8)
- NCSA httpd-style password file authentication helper for Squid
- ndc_selinux(8)
- Security Enhanced Policy for ndc processes
- ndisc6(8)
- ICMPv6 Neighbor Discovery tool
- ndisgtk(8)
- load Windows wireless drivers with ndiswrapper
- nepomukserver(8)
- KDE daemon - Nepomuk server application
- nepomukservicestub(8)
- KDE wrapper around Nepomuk service plugins
- net(8)
- Tool for administration of Samba/remote CIFS servers
- netcap(8)
- see capabilities
- netdevstat(8)
- tool for recording network activity
- netdump(8)
- send oops data/memory dumps over network
- netdump-server(8)
- handle crash dumps over network
- nethogs(8)
- Net top tool grouping bandwidth per process
- netlabel_mgmt_selinux(8)
- Security Enhanced Policy for netlabel_mgmt processes
- netlabel_selinux(8)
- Security Enhanced Policy for netlabel processes
- netlabelctl(8)
- NetLabel management utility
- netlogond_selinux(8)
- Security Enhanced Policy for netlogond processes
- netplugd(8)
- network cable hotplug management daemon
- netsniff-ng(8)
- packet sniffing beast
- netstat(8)
- Print network connections, routing tables, interface statistics, masquerade connections, and multicast memberships
- netutils_selinux(8)
- Security Enhanced Policy for netutils processes
- networkmanager(8)
- network management daemon
- networkmanager_selinux(8)
- Security Enhanced Policy for NetworkManager processes
- netxml-ups(8)
- Driver for Eaton/MGE Network Management Card/Proxy equipment
- new-kernel-pkg(8)
- script kernel installation
- newrole_selinux(8)
- Security Enhanced Policy for newrole processes
- news.daily(8)
- do regular Usenet system administration
- news2mail(8)
- gateway news into email
- newsrequeue(8)
- rewrite batchfiles
- newusers(8)
- update/create new users in batch
- nfs_selinux(8)
- Security Enhanced Policy for NFS
- nfsd(8)
- NFS server process
- nfsd_selinux(8)
- Security Enhanced Policy for nfsd processes
- nfsidmap(8)
- NFS idmapper upcall program
- nfsiostat(8)
- Emulate iostat for NFS mount points using /proc/self/mountstats
- nfslogsum(8)
- summarize nfswatch log file
- nfsstat(8)
- NFS statistics
- nfswatch(8)
- monitor server
- nginx(8)
- HTTP and reverse proxy server, mail proxy server
- ngircd(8)
- next generation IRC daemon
- ngrep(8)
- network grep
- nhfsgraph(8)
- Run nhfsstone over multiple loads
- nhfsnums(8)
- Convert nhfsrun output to plot
- nhfsrun(8)
- Run nhfsstone over multiple loads
- nhfsstone(8)
- Network File System benchmark program
- nighthttpd(8)
- http server for nightviewd/telescoped
- ninpaths(8)
- Report Usenet Path statistics
- nis_selinux(8)
- Security Enhanced Policy for ypbind processes
- nmbd(8)
- NetBIOS name server to provide NetBIOS over IP naming services to clients
- nmbd_selinux(8)
- Security Enhanced Policy for nmbd processes
- nnrpd(8)
- NNTP server for reader clients
- nntpd(8)
- NNTP server process
- nntpsend(8)
- send Usenet articles to remote site
- noexec(8)
- is library for preventing process from doing exec system call
- nologin(8)
- politely refuse login
- nordugridmap(8)
- ARC grid-mapfile generator
- notify(8)
- Hyla FAX user notification script
- notifyd(8)
- Cyrus notification server
- nova_ajax_selinux(8)
- Security Enhanced Policy for nova_ajax processes
- nova_api_selinux(8)
- Security Enhanced Policy for nova_api processes
- nova_cert_selinux(8)
- Security Enhanced Policy for nova_cert processes
- nova_compute_selinux(8)
- Security Enhanced Policy for nova_compute processes
- nova_console_selinux(8)
- Security Enhanced Policy for nova_console processes
- nova_direct_selinux(8)
- Security Enhanced Policy for nova_direct processes
- nova_network_selinux(8)
- Security Enhanced Policy for nova_network processes
- nova_objectstore_selinux(8)
- Security Enhanced Policy for nova_objectstore processes
- nova_scheduler_selinux(8)
- Security Enhanced Policy for nova_scheduler processes
- nova_vncproxy_selinux(8)
- Security Enhanced Policy for nova_vncproxy processes
- nova_volume_selinux(8)
- Security Enhanced Policy for nova_volume processes
- npcd(8)
- Nagios Performance C Daemon
- nrpe_selinux(8)
- Security Enhanced Policy for nrpe processes
- ns-slapd(8)
- main Directory Server daemon
- nscd(8)
- name service cache daemon
- nscd_selinux(8)
- Security Enhanced Policy for nscd processes
- nsd(8)
- Name Server Daemon
- nsd-checkconf(8)
- NSD config file checker
- nsd-notify(8)
- send NOTIFY's to remote nameservers
- nsd-patch(8)
- NSD zone patcher
- nsd-xfer(8)
- AXFR client to transfer zones from name server
- nsdc(8)
- Name Server Daemon control script
- nsec3hash(8)
- make NSEC3 hash
- nslcd(8)
- local LDAP name service daemon
- nslcd_selinux(8)
- Security Enhanced Policy for nslcd processes
- nslint(8)
- perform consistency checks on dns files
- nsplugin_config_selinux(8)
- Security Enhanced Policy for nsplugin_config processes
- nsplugin_selinux(8)
- Security Enhanced Policy for nsplugin processes
- nstat(8)
- network statistics tools
- nsupdate(8)
- Dynamic DNS update utility
- ntalkd(8)
- remote user communication server
- ntfs-3g(8)
- Third Generation Read/Write NTFS Driver
- ntfs-3g.probe(8)
- Probe NTFS volume mountability
- ntfs-3g.secaudit(8)
- NTFS Security Data Auditing
- ntfs-3g.usermap(8)
- NTFS Building User Mapping File
- ntfscat(8)
- print NTFS files/streams on stdout
- ntfsclone(8)
- Efficiently clone, image, restore or rescue NTFS
- ntfscluster(8)
- identify files in specified region of NTFS volume
- ntfscmp(8)
- compare two NTFS filesystems/tell diff
- ntfscp(8)
- copy file to NTFS volume
- ntfsfix(8)
- fix common errors/force Windows to check NTFS
- ntfsinfo(8)
- dump file's attribs
- ntfslabel(8)
- display/change label on ntfs file system
- ntfsls(8)
- directory contents on NTFS filesystem
- ntfsmount(8)
- NTFS module for FUSE
- ntfsprogs(8)
- tools for doing neat things with NTFS
- ntfsresize(8)
- resize NTFS filesystem without data loss
- ntfsundelete(8)
- recover deleted file from NTFS volume
- ntop(8)
- top network users
- ntop_selinux(8)
- Security Enhanced Policy for ntop processes
- ntp-keygen(8)
- make public/private keys
- ntp-wait(8)
- waits until ntpd is in synchronized state
- ntpd(8)
- Network Time Protocol daemon
- ntpd_selinux(8)
- Security Enhanced Policy for ntpd processes
- ntpdate(8)
- set date/time via NTP
- ntpdc(8)
- special NTP query program
- ntpq(8)
- standard NTP query program
- ntpstat(8)
- network time synchronisation status
- ntptime(8)
- read kernel time variables
- ntptrace(8)
- trace chain of NTP servers back to primary source
- ntsysv(8)
- simple interface for configuring runlevels
- numactl(8)
- Control NUMA policy for processes/shared memory
- numad(8)
-
- numad_selinux(8)
- Security Enhanced Policy for numad processes
- numastat(8)
-
- nut-recorder(8)
- utility to record device status/values changes
- nut-scanner(8)
- scan communication buses for NUT devices
- nut_selinux(8)
- Security Enhanced Policy for nut processes
- nut_upsd_selinux(8)
- Security Enhanced Policy for nut_upsd processes
- nut_upsdrvctl_selinux(8)
- Security Enhanced Policy for nut_upsdrvctl processes
- nut_upsmon_selinux(8)
- Security Enhanced Policy for nut_upsmon processes
- nutupsdrv(8)
- generic manual for unified NUT drivers
- nx_selinux(8)
- Security Enhanced Policy for nx processes
- nx_server_selinux(8)
- nx_server user role - Security Enhanced Policy
- ocf-tester(8)
- Part of -HA project
- oddjob_mkhomedir_selinux(8)
- Security Enhanced Policy for oddjob_mkhomedir processes
- oddjob_selinux(8)
- Security Enhanced Policy for oddjob processes
- oddjobd(8)
-
- ods-control(8)
- OpenDNSSEC control utility
- ods-enforcerd(8)
- OpenDNSSEC Policy Enforcer daemon
- ods-signer(8)
- OpenDNSSEC Signer Engine client
- ods-signerd(8)
- OpenDNSSEC Signer Engine daemon
- oidentd(8)
- TCP/IP IDENT protocol server
- omnimapper(8)
- Simple proxy for CORBA naming service from omniORB
- omninames(8)
- omniORB Naming Service
- omping(8)
- test IP multicast
- ondelay(8)
- program invoked by faxaddmodem/probemodem to configure modem device for use by those programs
- oneac(8)
- Driver for Oneac UPS equipment
- open_init_pty(8)
- run program under psuedo terminal
- openais_overview(8)
-
- openconnect(8)
- Connect to Cisco AnyConnect VPN
- openct_selinux(8)
- Security Enhanced Policy for openct processes
- opendkim(8)
- DKIM signing/verifying filter for MTAs
- opendkim-genkey(8)
- DKIM filter key generation tool
- opendkim-genzone(8)
- DKIM public key zone file generation tool
- opendkim-stats(8)
- output opendkim statistics
- opendkim-testadsp(8)
- DKIM filter ADSP evaluation tool
- opendkim-testkey(8)
- DKIM filter installation test
- opendkim-testmsg(8)
- DKIM message tst
- openhpid(8)
- HPI instance to which multiple clients can connect
- openoffice_selinux(8)
- Security Enhanced Policy for openoffice processes
- openser(8)
- flexible/roboust SIP server for Voice over IP
- openserctl(8)
- openser control tool
- openserunix(8)
- openser UNIX socket wrapper
- openshift_cgroup_read_selinux(8)
- Security Enhanced Policy for openshift_cgroup_read processes
- openshift_initrc_selinux(8)
- Security Enhanced Policy for openshift_initrc processes
- opensips(8)
- flexible/roboust SIP server for Voice over IP
- opensipsctl(8)
- opensips control tool
- opensipsunix(8)
- opensips UNIX socket wrapper
- opensm(8)
- InfiniBand subnet manager/administration
- openvas-adduser(8)
- add user in openvassd userbase
- openvas-mkcert(8)
- Creates scanner certificate
- openvas-nvt-sync(8)
- updates OpenVAS security checks
- openvas-rmuser(8)
- removes user from openvassd userbase
- openvassd(8)
- 'scanner' part of OpenVAS Security Scanner
- openvpn(8)
- secure IP tunnel daemon
- openvpn_selinux(8)
- Security Enhanced Policy for openvpn processes
- openvswitch_ovsdb_server_selinux(8)
- Security Enhanced Policy for openvswitch_ovsdb_server processes
- openvswitch_ovsv_switchd_selinux(8)
- Security Enhanced Policy for openvswitch_ovsv_switchd processes
- openwsmand(8)
- WS-Management Server
- oping(8)
- send ICMP ECHO_REQUEST to network hosts
- optiups(8)
- Driver for Opti-UPS UPS/Zinto D equipment
- oqmgr(8)
- old Postfix queue manager
- oscap(8)
- OpenSCAP tool
- osdmaptool(8)
- ceph osd cluster map change tool
- osmtest(8)
- InfiniBand subnet manager/administration test
- ospf6d(8)
- OSPFv3 routing engine for use with Quagga routing software
- ospfd(8)
- OSPFv2 routing engine for use with Quagga routing software
- ovdb_init(8)
- Prepare ovdb database for use
- ovdb_monitor(8)
- Database maintenance
- ovdb_recover(8)
- Perform recovery on ovdb database, if needed
- ovdb_server(8)
- overview 'helper' server
- ovdb_stat(8)
- info from ovdb database
- ovdb_upgrade(8)
- Perform any needed upgrades on ovdb database
- overchan(8)
- update news overview database
- ownership(8)
- Compaq ownership tag retriever
- pacemaker_selinux(8)
- Security Enhanced Policy for pacemaker processes
- pacemakerd(8)
- Part of Pacemaker cluster resource manager
- pack_cis(8)
- compile PCMCIA Card info Structures
- packit(8)
- Packet analysis/injection tool
- paco(8)
- source code package organizer
- pacoball(8)
- Binary package support for paco
- pads_selinux(8)
- Security Enhanced Policy for pads processes
- pagesend(8)
- Hyla FAX IXO/TAP/UCP transmit program
- pam(8)
- Pluggable Authentication Modules for
- pam.conf(8)
- Pluggable Authentication Modules for
- pam.d(8)
- Pluggable Authentication Modules for
- pam_access(8)
- PAM module for logdaemon style login access control
- pam_auth(8)
- Squid PAM authentication helper
- pam_ck_connector(8)
- Register session with ConsoleKit
- pam_console(8)
- determine user owning system console
- pam_console_apply(8)
- set/revoke permissions for users at system console
- pam_console_selinux(8)
- Security Enhanced Policy for pam_console processes
- pam_cracklib(8)
- PAM module to check password against dictionary words
- pam_debug(8)
- PAM module to debug PAM stack
- pam_deny(8)
- locking-out PAM module
- pam_echo(8)
- PAM module for printing text messages
- pam_ecryptfs(8)
- PAM module for eCryptfs
- pam_env(8)
- PAM module to set/unset environment variables
- pam_exec(8)
- PAM module which calls external command
- pam_faildelay(8)
- Change delay on failure per-application
- pam_faillock(8)
- Module counting authentication failures during specified interval
- pam_filter(8)
- PAM filter module
- pam_ftp(8)
- PAM module for anonymous access module
- pam_group(8)
- PAM module for group access
- pam_issue(8)
- PAM module to add issue file to user prompt
- pam_keyinit(8)
- Kernel session keyring initialiser module
- pam_keyring(8)
- PAM module that execute gnome-keyring-daemon/unlock default keyring
- pam_krb5(8)
- Kerberos 5 authentication
- pam_krb5_storetmp(8)
- Temporary file helper
- pam_lastlog(8)
- PAM module to display date of last login/perform inactive account lock out
- pam_limits(8)
- PAM module to limit resources
- pam_listfile(8)
- deny/allow services based on arbitrary file
- pam_localuser(8)
- require users to be listed in /etc/passwd
- pam_loginuid(8)
- Record user's login uid to process attrib
- pam_mail(8)
- Inform about available mail
- pam_mapi(8)
- Module for authentication via MAPI against Zarafa server
- pam_mkhomedir(8)
- PAM module to create users home directory
- pam_motd(8)
- motd file
- pam_namespace(8)
- PAM module for configuring namespace for session
- pam_nologin(8)
- Prevent non-root users from login
- pam_oddjob_mkhomedir(8)
-
- pam_passwdqc(8)
- Password quality-control PAM module
- pam_permit(8)
- promiscuous module
- pam_pkcs11(8)
- PAM Authentication Module for PKCS#11 token libraries
- pam_postgresok(8)
- simple check of real UID/corresponding account
- pam_pwhistory(8)
- PAM module to remember last passwords
- pam_pwquality(8)
- PAM module to perform password quality checking
- pam_rhosts(8)
- rhosts PAM module
- pam_rootok(8)
- Gain only root access
- pam_rps(8)
- challenge-response authentication
- pam_securetty(8)
- Limit root login to special devices
- pam_selinux(8)
- PAM module to set default security context
- pam_selinux_check(8)
- test pam_selinux_check
- pam_sepermit(8)
- PAM module to allow/deny login depending on SELinux enforcement state
- pam_shells(8)
- PAM module to check for valid login shell
- pam_ssh(8)
- authentication/session management with SSH private keys
- pam_ssh_agent_auth(8)
-
- pam_sss(8)
- PAM module for SSSD
- pam_stack(8)
- recurse into other PAM stacks
- pam_succeed_if(8)
- test account characteristics
- pam_tally(8)
- login counter module
- pam_tally2(8)
- login counter module
- pam_thinkfinger(8)
- PAM module for fingerprint authentication through libthinkfinger
- pam_time(8)
- PAM module for time control access
- pam_timestamp(8)
- Authenticate using cached successful authentication attempts
- pam_timestamp_check(8)
- Check to see if default timestamp is valid
- pam_tty_audit(8)
- Enable/disable TTY auditing for specified users
- pam_umask(8)
- PAM module to set file mode creation mask
- pam_unix(8)
- Module for traditional password authentication
- pam_userdb(8)
- PAM module to authenticate against db database
- pam_warn(8)
- PAM module which logs all PAM items if called
- pam_wheel(8)
- Only permit root access to members of group wheel
- pam_winbind(8)
- PAM module for Winbind
- pam_xauth(8)
- PAM module to forward xauth keys between users
- paperconfig(8)
- configure system default paper size
- parprouted(8)
- Proxy ARP IP bridging daemon
- parted(8)
- partition change program
- partimaged(8)
- backup/restore partitions server
- partimaged-passwd(8)
- Manage partimaged user accounts
- partprobe(8)
- inform OS of partition table changes
- partx(8)
- telling kernel about presence/numbering of on-disk partitions
- passenger-memory-stats(8)
- reports snapshot of Apache/Phusion Passenger memory statistcs
- passenger-status(8)
- inspect Phusion Passenger's internal status
- passenger_selinux(8)
- Security Enhanced Policy for passenger processes
- passwd_selinux(8)
- Security Enhanced Policy for passwd processes
- pawserv(8)
- CERNLIB program for serving PAW histograms remotely
- pbs_mom(8)
- start pbs batch execution mini-server
- pbs_sched(8)
- pbs C scheduler
- pbs_sched_basl(8)
- pbs BASL scheduler
- pbs_sched_cc(8)
- pbs C scheduler
- pbs_sched_tcl(8)
- pbs Tcl scheduler
- pbs_server(8)
- start pbs batch server
- pbsnodes(8)
- pbs node change
- pcbitctl(8)
- PCBIT-D firmware loader
- pccardctl(8)
- PCMCIA card control utility
- pcscd(8)
- PC/SC Smart Card Daemon
- pcscd_selinux(8)
- Security Enhanced Policy for pcscd processes
- pdbedit(8)
- manage SAM database
- pdf2fax(8)
- image Portable Document Format file for facsimile transmission by Hyla FAX
- pdns_control(8)
- Control pDNS nameserver
- pdns_server(8)
- PowerDNS nameserver
- pdumpfs(8)
- daily backup system similar to Plan9's dumpfs
- pef-config(8)
- configure PEF values
- pefconfig(8)
- show/configure BMC LAN parameters/set up PEF entry to send BMC LAN Alerts for OS Critical Stop log events
- pegasus_selinux(8)
- Security Enhanced Policy for pegasus processes
- perfquery(8)
- query InfiniBand port counters
- perl-nocem(8)
- NoCeM-on-spool implementation for INN 2.x
- pethtool(8)
- Display/change ethernet card settings
- pgpool(8)
- PostgreSQL connection pool daemon
- pgpverify(8)
- cryptographically verify Usenet control messages
- pgtune(8)
- PostgreSQL Config Tuner
- phc2sys(8)
- synchronize two clocks
- photorec(8)
- Recover lost files from harddisk, digital camera and cdrom
- php-fpm(8)
- PHP FastCGI Process Manager 'PHP-FPM'
- pi(8)
-
- pickup(8)
- Postfix local mail pickup
- picocom(8)
- minimal dumb-terminal emulation program
- pidof(8)
- find process ID of running program
- pifconfig(8)
- network interface
- ping(8)
- send ICMP ECHO_REQUEST to network hosts
- ping6(8)
- send ICMP ECHO_REQUEST to network hosts
- ping_selinux(8)
- Security Enhanced Policy for ping processes
- pingd(8)
- node up/down monitoring daemon
- pingd_selinux(8)
- Security Enhanced Policy for pingd processes
- pipe(8)
- Postfix delivery to external command
- piranha_fos_selinux(8)
- Security Enhanced Policy for piranha_fos processes
- piranha_lvs_selinux(8)
- Security Enhanced Policy for piranha_lvs processes
- piranha_pulse_selinux(8)
- Security Enhanced Policy for piranha_pulse processes
- piranha_selinux(8)
- Security Enhanced Policy for piranha processes
- piranha_web_selinux(8)
- Security Enhanced Policy for piranha_web processes
- pirut(8)
- graphical software installer/remover
- pivot_root(8)
- change root file system
- pkcs11-helper-1(8)
- Simplified PKCS#11 library
- pkcsslotd(8)
- shared memory manager for opencryptoki
- pkcsslotd_selinux(8)
- Security Enhanced Policy for pkcsslotd processes
- pklocalauthority(8)
- PolicyKit Local Authority
- pktsetup(8)
- set up/tear down packet device associations
- plainrsa-gen(8)
- generator for Plain RSA keys
- plipconfig(8)
- fine tune PLIP device parameters
- plmpower(8)
- control Insteon/X10 devices via SmartLabs PLM 2412S
- pluginviewer(8)
- loadable SASL plugins/their properties
- plymouth(8)
- graphical boot system/logger
- plymouth_selinux(8)
- Security Enhanced Policy for plymouth processes
- plymouthd_selinux(8)
- Security Enhanced Policy for plymouthd processes
- pm-action(8)
- Suspend/Hibernate your computer
- pm-hibernate(8)
- Suspend/Hibernate your computer
- pm-pmu(8)
- suspend computer on machines using Macintosh-style PMU
- pm-powersave(8)
- Put your computer into low power mode
- pm-suspend(8)
- Suspend/Hibernate your computer
- pm-suspend-hybrid(8)
- Suspend/Hibernate your computer
- pmap_dump(8)
- print list of all registered RPC programs
- pmap_set(8)
- set list of registered RPC programs
- pmc(8)
- PTP management client
- podsleuth_selinux(8)
- Security Enhanced Policy for podsleuth processes
- policykit_auth_selinux(8)
- Security Enhanced Policy for policykit_auth processes
- policykit_grant_selinux(8)
- Security Enhanced Policy for policykit_grant processes
- policykit_resolve_selinux(8)
- Security Enhanced Policy for policykit_resolve processes
- policykit_selinux(8)
- Security Enhanced Policy for policykit processes
- polkit(8)
- Authorization Framework
- polkitd(8)
- PolicyKit daemon
- pollrcvd(8)
- Hyla FAX script for delivering facsimile received by polling
- pop3d(8)
- POP3 server process
- pop3p(8)
- POP3 proxy gateway service
- portmap(8)
- DARPA port to RPC program number mapper
- portmap_helper_selinux(8)
- Security Enhanced Policy for portmap_helper processes
- portmap_selinux(8)
- Security Enhanced Policy for portmap processes
- portreserve_selinux(8)
- Security Enhanced Policy for portreserve processes
- postfix_bounce_selinux(8)
- Security Enhanced Policy for postfix_bounce processes
- postfix_cleanup_selinux(8)
- Security Enhanced Policy for postfix_cleanup processes
- postfix_local_selinux(8)
- Security Enhanced Policy for postfix_local processes
- postfix_map_selinux(8)
- Security Enhanced Policy for postfix_map processes
- postfix_master_selinux(8)
- Security Enhanced Policy for postfix_master processes
- postfix_pickup_selinux(8)
- Security Enhanced Policy for postfix_pickup processes
- postfix_pipe_selinux(8)
- Security Enhanced Policy for postfix_pipe processes
- postfix_postdrop_selinux(8)
- Security Enhanced Policy for postfix_postdrop processes
- postfix_postqueue_selinux(8)
- Security Enhanced Policy for postfix_postqueue processes
- postfix_qmgr_selinux(8)
- Security Enhanced Policy for postfix_qmgr processes
- postfix_selinux(8)
- Security Enhanced Policy for postfix processes
- postfix_showq_selinux(8)
- Security Enhanced Policy for postfix_showq processes
- postfix_smtp_selinux(8)
- Security Enhanced Policy for postfix_smtp processes
- postfix_smtpd_selinux(8)
- Security Enhanced Policy for postfix_smtpd processes
- postfix_virtual_selinux(8)
- Security Enhanced Policy for postfix_virtual processes
- postgresql-relay(8)
- multiplex all your databases to one point of origin
- postgresql_selinux(8)
- Security Enhanced Policy for postgresql processes
- postgrey(8)
- Postfix Greylisting Policy Server
- postgrey_selinux(8)
- Security Enhanced Policy for postgrey processes
- pound(8)
- HTTP/HTTPS reverse-proxy/load-balancer
- poundctl(8)
- control pound daemon
- powercom(8)
- UPS driver for serial Powercom/Trust/Advice UPS equipment
- powermand(8)
- power control/monitoring daemon
- poweroff(8)
- reboot/stop system
- powerpanel(8)
- Driver for PowerPanel Plus compatible UPS equipment
- powertop(8)
- analyze power consumption on Intel-based laptops
- ppp-watch(8)
- daemon to make PPP interfaces act more like other interfaces
- pppd(8)
- Point-to-Point Protocol Daemon
- pppd-radattr(8)
- RADIUS utility plugin for pppd
- pppd-radius(8)
- RADIUS authentication plugin for pppd
- pppd_selinux(8)
- Security Enhanced Policy for pppd processes
- pppdump(8)
- convert PPP record file to readable format
- pppoe(8)
- user-space PPPoE client
- pppoe-connect(8)
- manage PPPoE link
- pppoe-relay(8)
- user-space PPPoE relay agent
- pppoe-server(8)
- user-space PPPoE server
- pppoe-setup(8)
- configure Roaring Penguin PPPoE client
- pppoe-sniff(8)
- examine network for non-standard PPPoE frames
- pppoe-start(8)
- bring up PPPoE link
- pppoe-status(8)
- report on status of PPPoE link
- pppoe-stop(8)
- shut down PPPoE link
- pppstats(8)
- print PPP statistics
- pptp(8)
- PPTP driver
- pptp_selinux(8)
- Security Enhanced Policy for pptp processes
- pptpsetup(8)
- Point-to-Point Tunneling Protocol setup
- praliases(8)
- system mail aliases
- prelink(8)
- prelink ELF shared libraries/binaries to speed up startup time
- prelink_cron_system_selinux(8)
- Security Enhanced Policy for prelink_cron_system processes
- prelink_selinux(8)
- Security Enhanced Policy for prelink processes
- prelude_audisp_selinux(8)
- Security Enhanced Policy for prelude_audisp processes
- prelude_correlator_selinux(8)
- Security Enhanced Policy for prelude_correlator processes
- prelude_lml_selinux(8)
- Security Enhanced Policy for prelude_lml processes
- prelude_selinux(8)
- Security Enhanced Policy for prelude processes
- privoxy_selinux(8)
- Security Enhanced Policy for privoxy processes
- probemodem(8)
- This script probes modem attached to serial line/reports results of certain commands
- procinfo(8)
- system status gathered from /proc
- procmail_selinux(8)
- Security Enhanced Policy for procmail processes
- proftpd(8)
- Professional configurable, secure file transfer protocol server
- proxy(8)
- HTTP proxy gateway service
- proxymap(8)
- Postfix lookup table proxy server
- prunehistory(8)
- remove tokens from Usenet history file
- ps2fax(8)
- image P OST S CRIPT ® for facsimile transmission by Hyla FAX
- psad_selinux(8)
- Security Enhanced Policy for psad processes
- pscap(8)
- see capabilities
- ptal_selinux(8)
- Security Enhanced Policy for ptal processes
- ptchown_selinux(8)
- Security Enhanced Policy for ptchown processes
- ptp4l(8)
- PTP Boundary/Ordinary Clock
- ptunnel(8)
- tunnel TCP connections over ICMP echo request/reply packets
- publicfile_selinux(8)
- Security Enhanced Policy for publicfile processes
- pullnews(8)
- perl script for pulling news from one news machine/feeding it to another
- pulse(8)
- heartbeating daemon for monitoring health of cluster nodes
- pulseaudio_selinux(8)
- Security Enhanced Policy for pulseaudio processes
- pup(8)
- Package updater
- puplet(8)
- Package update notification
- puppet(8)
-
- puppet-agent(8)
- puppet agent daemon
- puppet-apply(8)
- Apply Puppet manifests locally
- puppet-ca(8)
- Local Puppet Certificate Authority management
- puppet-catalog(8)
- Compile, save, view, and convert catalogs
- puppet-cert(8)
- Manage certificates/requests
- puppet-certificate(8)
- Provide access to CA for certificate management
- puppet-certificate_request(8)
- Manage certificate requests
- puppet-certificate_revocation_list(8)
- Manage list of revoked certificates
- puppet-config(8)
- Interact with Puppet's config options
- puppet-describe(8)
- help about resource types
- puppet-device(8)
- Manage remote network devices
- puppet-doc(8)
- make Puppet documentation/references
- puppet-facts(8)
- Retrieve/store facts
- puppet-file(8)
- Retrieve/store files in filebucket
- puppet-filebucket(8)
- Store/retrieve files in filebucket
- puppet-help(8)
- Puppet help
- puppet-inspect(8)
- Send inspection report
- puppet-instrumentation_data(8)
- Manage instrumentation listener accumulated data
- puppet-instrumentation_listener(8)
- Manage instrumentation listeners
- puppet-instrumentation_probe(8)
- Manage instrumentation probes
- puppet-key(8)
- Create, save, and remove certificate keys
- puppet-kick(8)
- Remotely control puppet agent
- puppet-man(8)
- Puppet manual pages
- puppet-master(8)
- puppet master daemon
- puppet-module(8)
- Creates, installs and searches for modules on Puppet Forge
- puppet-node(8)
- View/manage node definitions
- puppet-parser(8)
- Interact directly with parser
- puppet-plugin(8)
- Interact with Puppet plugin system
- puppet-queue(8)
- Queuing daemon for asynchronous storeconfigs
- puppet-report(8)
- Create, display, and submit reports
- puppet-resource(8)
- resource abstraction layer shell
- puppet-resource_type(8)
- View classes, defined resource types, and nodes from all manifests
- puppet-secret_agent(8)
- Mimics puppet agent
- puppet-status(8)
- View puppet server status
- puppet_selinux(8)
- Security Enhanced Policy for puppet processes
- puppetca(8)
-
- puppetd(8)
-
- puppetdoc(8)
-
- puppetmaster_selinux(8)
- Security Enhanced Policy for puppetmaster processes
- puppetmasterd(8)
-
- puppetqd(8)
-
- puppetrun(8)
-
- pure-authd(8)
- External authentication agent for Pure-FTPd
- pure-ftpd(8)
- simple File Transfer Protocol server
- pure-ftpwho(8)
- Report current FTP sessions
- pure-mrtginfo(8)
- provide MRTG-graphable user count for ftpd
- pure-pw(8)
- Manage virtual users files for Pure-FTPd
- pure-pwconvert(8)
- make virtual users file from system accounts
- pure-quotacheck(8)
- Update virtual quota files for Pure-FTPd
- pure-statsdecode(8)
- human-readable dates from stats logfile
- pure-uploadscript(8)
- Automatically run external program after successful upload
- puzzle-diff(8)
- Compare pictures with libpuzzle
- pvchange(8)
- change attribs of physical volume
- pvck(8)
- check physical volume metadata
- pvcreate(8)
- initialize disk/partition for use by LVM
- pvdisplay(8)
- attribs of physical volume
- pvmove(8)
- move physical extents
- pvremove(8)
- remove physical volume
- pvresize(8)
- resize disk/partition in use by LVM2
- pvs(8)
- report info about physical volumes
- pvscan(8)
- scan all disks for physical volumes
- pwck(8)
- verify integrity of password files
- pwconv(8)
- convert to/from shadow passwords/groups
- pwdb_chkpwd(8)
- Helper binary that verifies password of current user
- pwmconfig(8)
- tests PWM outputs of sensors/configures fancontrol
- pwunconv(8)
- convert to/from shadow passwords/groups
- pwupdate(8)
- updates passwd/shadow NIS map
- pxeboot(8)
- Network Booting Operating Systems config Utility
- pxeos(8)
- PXEBoot Operating System description config Utility
- pydcp(8)
-
- pydsh(8)
-
- qb-blackbox(8)
- flight data from blackbox
- qdisable(8)
- disable input to pbs destination
- qdiskd(8)
- Cluster Quorum Disk Daemon
- qdiskd_selinux(8)
- Security Enhanced Policy for qdiskd processes
- qemu_selinux(8)
- Security Enhanced Policy for qemu processes
- qenable(8)
- enable input to pbs destination
- qmail_clean_selinux(8)
- Security Enhanced Policy for qmail_clean processes
- qmail_inject_selinux(8)
- Security Enhanced Policy for qmail_inject processes
- qmail_local_selinux(8)
- Security Enhanced Policy for qmail_local processes
- qmail_lspawn_selinux(8)
- Security Enhanced Policy for qmail_lspawn processes
- qmail_queue_selinux(8)
- Security Enhanced Policy for qmail_queue processes
- qmail_remote_selinux(8)
- Security Enhanced Policy for qmail_remote processes
- qmail_rspawn_selinux(8)
- Security Enhanced Policy for qmail_rspawn processes
- qmail_selinux(8)
- Security Enhanced Policy for qmail processes
- qmail_send_selinux(8)
- Security Enhanced Policy for qmail_send processes
- qmail_smtpd_selinux(8)
- Security Enhanced Policy for qmail_smtpd processes
- qmail_splogger_selinux(8)
- Security Enhanced Policy for qmail_splogger processes
- qmail_start_selinux(8)
- Security Enhanced Policy for qmail_start processes
- qmail_tcp_env_selinux(8)
- Security Enhanced Policy for qmail_tcp_env processes
- qmgr(8)
- Postfix queue manager
- qmqpd(8)
- Postfix QMQP server
- qpidd_selinux(8)
- Security Enhanced Policy for qpidd processes
- qrun(8)
- run pbs batch job
- qstart(8)
- start pbs batch job processing at destination
- qstop(8)
- stop pbs batch job processing at destination
- qterm(8)
- terminate processing by PBS batch server
- quantum_selinux(8)
- Security Enhanced Policy for quantum processes
- quota(8)
- report/fix quota usage
- quota_nld(8)
- quota netlink message daemon
- quota_nld_selinux(8)
- Security Enhanced Policy for quota_nld processes
- quota_selinux(8)
- Security Enhanced Policy for quota processes
- quotacheck(8)
- scan filesystem for disk usage, create, check and repair quota files
- quotaoff(8)
- turn filesystem quotas on/off
- quotaon(8)
- turn filesystem quotas on/off
- quotastats(8)
- query quota statistics
- racoon(8)
- IKE key management daemon
- racoon2-iked(8)
- Internet Key Exchange protocol daemon
- racoon2-pskgen(8)
- Pre-shared key generater/converter for IKE
- racoon2-spmd(8)
- Manages IPsec Security Policy for racoon2
- racoon2-spmdctl(8)
- Control spmd
- racoon_selinux(8)
- Security Enhanced Policy for racoon processes
- racoonctl(8)
- racoon administrative control tool
- radconf2xml(8)
- converts radiusd.conf to XML
- radcrypt(8)
- make password hash for use with radius, or validates password hash
- raddebug(8)
- debugging output from running server
- radius(8)
- nnrpd RADIUS password authenticator
- radiusd(8)
- Authentication, Authorization and Accounting server
- radiusd_selinux(8)
- Security Enhanced Policy for radiusd processes
- radmin(8)
- FreeRADIUS Administration tool
- radmind(8)
- Remote administration daemon
- rados(8)
- rados object storage utility
- radosgw(8)
- rados REST gateway
- radosgw-admin(8)
- rados REST gateway user administration utility
- radrelay(8)
- Deprecated command
- radsniff(8)
- dump radius protocol
- radsqlrelay(8)
- relay SQL queries to central database server
- radvd(8)
- router advertisement daemon for IPv6
- radvd_selinux(8)
- Security Enhanced Policy for radvd processes
- radvdump(8)
- dump router advertisements
- radwatch(8)
- wrapper for radiusd
- ralf(8)
- undelete deleted file from ext2/ext3 file systems
- ralsh(8)
-
- ramsize(8)
- query/set image root device, RAM disk size, or video mode
- rarpd(8)
- Reverse Address Resolution Protocol daemon
- raw(8)
- bind raw char device
- rawdevices(8)
- bind raw char device
- rbd(8)
- manage rados block device images
- rbldns(8)
- Real time Block List DNS server
- rbldnsd(8)
- DNS daemon suitable for running DNS-based blocklists
- rc.news(8)
- Start/stop INN daemons
- rdev(8)
- query/set image root device, RAM disk size, or video mode
- rdisc(8)
- network router discovery daemon
- rdisc6(8)
- ICMPv6 Router Discovery tool
- rdisc_selinux(8)
- Security Enhanced Policy for rdisc processes
- rdist(8)
- remote file distribution server program
- rdnssd(8)
- IPv6 Recursive DNS Server discovery Daemon
- rdump(8)
- ext2/3 filesystem backup
- rdup(8)
- make file list suitable for making backups
- rdup-backups(8)
- introduction into making backups with rdup
- rdup-cp(8)
- copy files from rdup
- rdup-dump(8)
- dump filesystem for specifc host
- rdup-mirror(8)
- mirror files from list on stdin
- rdup-restore(8)
- restore filesystem from specific directory
- rdup-simple(8)
- create hardlink backup
- rdup-snap(8)
- create backup in hard link directory
- rdup-snap-link(8)
-
- rdup-snapshot(8)
- create hardlink backup
- readahead_selinux(8)
- Security Enhanced Policy for readahead processes
- rear(8)
- bare metal disaster recovery/system migration tool
- reboot(8)
- reboot/stop system
- reconstruct(8)
- reconstruct mailboxes
- recvstats(8)
- summarize Hyla FAX receive accounting info
- redirect(8)
- simple redirection CGI program
- regdbdump(8)
- parse/print out regulatory rules file
- regex_milter_selinux(8)
- Security Enhanced Policy for regex_milter processes
- regex_selinux(8)
- Security Enhanced Policy for regex processes
- register-common-lisp-implementation(8)
- internal clc commands
- register-common-lisp-source(8)
- internal clc commands
- register-ds-admin.pl(8)
- Registers Directory Server instances with Admin Server
- reiserfs(8)
- powerfull journaled, based on balanced trees filesystem
- reject(8)
- accept/reject jobs sent to destination
- reload(8)
- init daemon control tool
- remctld(8)
- Server for remctl, remote command execution utility
- remove-ds-admin.pl(8)
- Remove all Directory Servers/Admin Server
- remove-ds.pl(8)
- Remove instance of Directory Server
- renice(8)
- alter priority of running processes
- repoview(8)
- Make YUM repositories browseable
- repquota(8)
- summarize quotas for filesystem
- request-key(8)
- Handle key instantiation callback requests from kernel
- resize2fs(8)
- ext2/ext3/ext4 file system resizer
- resize4fs(8)
- ext2/ext3/ext4 file system resizer
- resizecons(8)
- change kernel idea of console size
- resizefs.reiserfs(8)
- reiserfs filesystem resizing program
- restart(8)
- init daemon control tool
- restart-dirsrv(8)
- restart script for Directory Server
- restart-ds-admin(8)
- restart script for Admin Server
- restore(8)
- restore files/file systems from backups made with dump
- restorecon(8)
- restore file default SELinux security contexts
- restorecond(8)
- daemon that watches for file creation/then sets
- restorecond_selinux(8)
- Security Enhanced Policy for restorecond processes
- revnetgroup(8)
- make reverse netgroup data
- rexecd(8)
- remote execution server
- rfiod(8)
-
- rgmanager(8)
- Resource Group Manager Daemon
- rgmanager_selinux(8)
- Security Enhanced Policy for rgmanager processes
- rhev_agentd_selinux(8)
- Security Enhanced Policy for rhev_agentd processes
- rhev_selinux(8)
- Security Enhanced Policy for rhev processes
- rhgb_selinux(8)
- Security Enhanced Policy for rhgb processes
- rhino(8)
- Driver for Brazilian Microsol RHINO UPS equipment
- rhn-config-satellite.pl(8)
- make config files for Spacewalk server
- rhn-config-schema.pl(8)
- utility to populate Spacewalk database tablespacee
- rhn-custom-info(8)
- handling of custom key/value pairs for RHN-enabled system
- rhn-deploy-ca-cert.pl(8)
- utility to move CA certificates to Spacewalk public folder. This tool is used internally by spacewalk-setup. You should not call it directly
- rhn-generate-pem.pl(8)
- utility to make PEM certificate for jabber service. This tool is used internally by spacewalk-setup. You should not call it directly
- rhn-install-ssl-cert.pl(8)
- utility to install latest certificate mentioned in DIR/latest.txt This tool is used internally by spacewalk-setup. You should not call it directly
- rhn-sat-restart-silent(8)
- restart Spacewalk silently
- rhn-satellite(8)
- control Spacewalk server
- rhn_check(8)
- check for queued actions on RHN/execute
- rhnpush(8)
- Utility to push binary/source RPMs into RHN channel
- rhnreg_ks(8)
- program for non interactively registering systems to CentOS Network
- rhnsd(8)
- program for querying CentOS Network for updates/info
- rhnsd_selinux(8)
- Security Enhanced Policy for rhnsd processes
- rhsm-compliance-icon(8)
- Periodically checks installed products against active subscriptions to check for compliance
- rhsmcertd(8)
- Periodically scans/updates entitlement certificates on registered system
- rhsmcertd_selinux(8)
- Security Enhanced Policy for rhsmcertd processes
- ricci(8)
- cluster management/config daemon
- ricci_modcluster_selinux(8)
- Security Enhanced Policy for ricci_modcluster processes
- ricci_modclusterd_selinux(8)
- Security Enhanced Policy for ricci_modclusterd processes
- ricci_modlog_selinux(8)
- Security Enhanced Policy for ricci_modlog processes
- ricci_modrpm_selinux(8)
- Security Enhanced Policy for ricci_modrpm processes
- ricci_modservice_selinux(8)
- Security Enhanced Policy for ricci_modservice processes
- ricci_modstorage_selinux(8)
- Security Enhanced Policy for ricci_modstorage processes
- ricci_selinux(8)
- Security Enhanced Policy for ricci processes
- richcomm_usb(8)
- Driver UPS equipment using Richcomm dry-contact to USB solution
- ripd(8)
- RIP routing engine for use with Quagga routing software
- ripngd(8)
- RIPNG routing engine for use with Quagga routing software
- rkhunter(8)
- RootKit Hunter
- rlm_dbm_cat(8)
- contents of radius database
- rlm_dbm_parser(8)
- transforms simple syntax into rlm_dbm format
- rlm_ippool_tool(8)
- dump contents of FreeRadius ippool database files
- rlogind(8)
- remote login server
- rlogind_selinux(8)
- Security Enhanced Policy for rlogind processes
- rltraceroute6(8)
- IPv6 traceroute tool
- rmail(8)
- handle remote mail received via uucp
- rmcpping(8)
- send RMCP Ping to network hosts
- rmmod(8)
- remove module from Kernel
- rmnews(8)
- expunge/remove news articles
- rmt(8)
- remote magtape protocol module
- rndc(8)
- name server control utility
- rndc-confgen(8)
- rndc key generation tool
- rngd(8)
- Check/feed random data from hardware device to kernel
- rootflags(8)
- query/set image root device, RAM disk size, or video mode
- rotatelogs(8)
- rotate Apache logs
- roundup_selinux(8)
- Security Enhanced Policy for roundup processes
- route(8)
- show/change IP routing table
- routel(8)
- routes with pretty output format
- router(8)
- XML packet distributor
- rpc.bootparamd(8)
- boot parameter server
- rpc.gssd(8)
- rpcsec_gss daemon
- rpc.idmapd(8)
- NFSv4 ID <-> Name Mapper
- rpc.lockd(8)
- start kernel lockd process
- rpc.mountd(8)
- NFS mount daemon
- rpc.nfsd(8)
- NFS server process
- rpc.rquotad(8)
- remote quota server
- rpc.rstatd(8)
- kernel statistics server
- rpc.rusersd(8)
- logged in users server
- rpc.sm-notify(8)
- send reboot notifications to NFS peers
- rpc.statd(8)
- NSM service daemon
- rpc.svcgssd(8)
- server-side rpcsec_gss daemon
- rpc.yppasswdd(8)
- NIS password update daemon
- rpc.ypxfrd(8)
- NIS map transfer server
- rpcbind(8)
- universal addresses to RPC program number mapper
- rpcbind_selinux(8)
- Security Enhanced Policy for rpcbind processes
- rpcd_selinux(8)
- Security Enhanced Policy for rpcd processes
- rpcdebug(8)
- set/clear NFS/RPC kernel debug flags
- rpcinfo(8)
- report RPC info
- rpm(8)
- RPM Package Manager
- rpm2cpio(8)
- Extract cpio archive from RPM Package Manager package
- rpm2paco(8)
- create paco logs from local RPM database
- rpm_script_selinux(8)
- Security Enhanced Policy for rpm_script processes
- rpm_selinux(8)
- Security Enhanced Policy for rpm processes
- rpmbuild(8)
- Build RPM Package
- rpmcache(8)
- Cache RPM Package Headers
- rpmconf(8)
- This tool seach for .rpmnew, .rpmsave and .rpmorigfiles and ask you what to do with them: Keep current version, place back old version or watch diff. -, --all ...
- rpmdeps(8)
- make RPM Package Dependencies
- rpmdev-rmdevelrpms(8)
- manual page for rpmdev-rmdevelrpms
- rpmgraph(8)
- RPM Package Dependency Graph
- rquotad(8)
- remote quota server
- rrestore(8)
- restore files/file systems from backups made with dump
- rshd(8)
- remote shell server
- rshd_selinux(8)
- Security Enhanced Policy for rshd processes
- rssh_selinux(8)
- Security Enhanced Policy for rssh processes
- rstatd(8)
- kernel statistics server
- rsync_selinux(8)
- Security Enhanced Policy for rsync processes
- rsyslogd(8)
- reliable/extended syslogd
- rtacct(8)
- network statistics tools
- rtcwake(8)
- enter system sleep state until specified wakeup time
- rtkit_daemon_selinux(8)
- Security Enhanced Policy for rtkit_daemon processes
- rtkit_selinux(8)
- Security Enhanced Policy for rtkit processes
- rtmon(8)
- listens to/monitors RTnetlink
- rtmpgw(8)
- RTMP streaming media gateway
- rtpproxy(8)
- RTP Proxy Server
- run_init(8)
- run init script in proper SELinux context
- run_init_selinux(8)
- Security Enhanced Policy for run_init processes
- run_kannel_box(8)
- Run Kannel box
- run_selinux(8)
- Security Enhanced Policy for run processes
- runlevel(8)
- output previous/current runlevel
- rusersd(8)
- logged in users server
- rvnamed(8)
- reverse name resolution daemon for iptraf
- rvnamed-ng(8)
- reverse name resolution daemon for iptraf
- rwho_selinux(8)
- Security Enhanced Policy for rwho processes
- rwhod(8)
- system status server
- s2s(8)
- server-to-server connector
- sa(8)
- summarizes accounting info
- sa1(8)
- Collect/store binary data in system activity daily data file
- sa2(8)
- daily report in /var/log/sa directory
- sabayon(8)
- graphically manage GNOME desktop profiles
- sabayon-apply(8)
- Apply sabayon profile to user
- sadc(8)
- System activity data collector
- safe_asterisk(8)
- wrapper to run asterisk executable in loop
- safe_finger(8)
- finger client wrapper that protects against nasty stuff from finger servers
- safenet(8)
- Driver for SafeNet compatible UPS equipment
- sagator(8)
- email/web antivirus/antispam gateway
- sam_overview(8)
- Overview of Simple Availability Manager
- samba_net_selinux(8)
- Security Enhanced Policy for samba_net processes
- samba_selinux(8)
- Security Enhanced Policy for smbd processes
- samba_unconfined_script_selinux(8)
- Security Enhanced Policy for samba_unconfined_script processes
- sambagui_selinux(8)
- Security Enhanced Policy for sambagui processes
- sandbox(8)
- Run cmd under SELinux sandbox
- sandbox_selinux(8)
- Security Enhanced Policy for sandbox processes
- saned(8)
- SANE network daemon
- sanlock(8)
- shared storage lock manager
- sanlock_selinux(8)
- Security Enhanced Policy for sanlock processes
- saquery(8)
- query InfiniBand subnet administration attribs
- saslauthd(8)
- sasl authentication server
- saslauthd_selinux(8)
- Security Enhanced Policy for saslauthd processes
- sasldblistusers(8)
- users in sasldb
- sasldblistusers2(8)
- users in sasldb
- saslpasswd(8)
- set user's sasl password
- saslpasswd2(8)
- set user's sasl password
- savecore(8)
- save diskdump image
- sblim_gatherd_selinux(8)
- Security Enhanced Policy for sblim_gatherd processes
- sblim_reposd_selinux(8)
- Security Enhanced Policy for sblim_reposd processes
- sblim_selinux(8)
- Security Enhanced Policy for sblim processes
- scache(8)
- Postfix shared connection cache server
- scanlogs(8)
- summarize INN log files
- scannedonly_prescan(8)
- utility to prescan files for scannedonly samba
- scannedonlyd_clamav(8)
- daemon to scan files for scannedonly samba
- scomes(8)
- tool for watching system resources
- scponly(8)
-
- script-email(8)
- send email notifications
- scrollkeeper-preinstall(8)
- make on OMF file, based on existing OMF file, which has correct URL for document
- scrollkeeper-rebuilddb(8)
- rebuild scrollkeeper document catalog database
- scrollkeeper-update(8)
- identify new, modified, or removed OMF files and update scrollkeeper databases
- scsi_id(8)
- retrieve/make unique SCSI identifier
- scsi_readcap(8)
- do SCSI READ CAPACITY command on disks
- scsi_ready(8)
- do SCSI TEST UNIT READY on devices
- scsi_start(8)
- start one/more SCSI disks
- scsi_stop(8)
- stop one/more SCSI disks
- sdparm(8)
- access SCSI modes pages; read VPD pages; send simple SCSI commands
- sdpd(8)
-
- sealert(8)
- setroubleshoot client tool
- seaudit(8)
- SELinux graphical audit log analysis tool
- seaudit-report(8)
- SELinux audit log reporting tool
- sectoolm_selinux(8)
- Security Enhanced Policy for sectoolm processes
- securetty(8)
- add tty to /etc/securetty
- sedispatch(8)
- setroubleshoot audit dispatcher for SELinux Messages
- selinux(8)
- NSA Security-Enhanced
- selinuxconlist(8)
- all SELinux context reachable for user
- selinuxdefcon(8)
- report default SELinux context for user
- selinuxenabled(8)
- be used within shell scripts to determine if selinux is enabled
- semanage(8)
- SELinux Policy Management tool
- semanage_selinux(8)
- Security Enhanced Policy for semanage processes
- semodule(8)
- Manage SELinux policy modules
- semodule_deps(8)
- dependencies between SELinux policy packages
- semodule_expand(8)
- Expand SELinux policy module package
- semodule_link(8)
- Link SELinux policy module packages together
- semodule_package(8)
- Create SELinux policy module package
- send-nntp(8)
- send Usenet articles to remote site
- send-uucp(8)
- Send Usenet articles via UUCP
- send_arp(8)
- notify network of new IP address/MAC address mapping
- sendfax(8)
- send group 3 fax files with class 2 faxmodem
- sendinpaths(8)
- Send Usenet Path statistics via e-mail
- sendmail.sendmail(8)
- electronic mail transport agent
- sendmail_selinux(8)
- Security Enhanced Policy for sendmail processes
- sensor(8)
- Sensor Data Records
- sensord(8)
- Sensor info logging daemon
- sensord_selinux(8)
- Security Enhanced Policy for sensord processes
- sensors-detect(8)
- detect hardware monitoring chips
- ser2net(8)
- Serial to network proxy
- sercd(8)
- RFC 2217 Serial Communications Daemon
- service(8)
- run System V init script
- sesman(8)
- xrdp session manager
- sesrun(8)
- sesman session launcher
- sestatus(8)
- SELinux status tool
- setarch(8)
- change reported architecture in new program environment/set personality flags
- setcap(8)
- set file capabilities
- setenforce(8)
- modify mode SELinux is running in
- setfdprm(8)
- sets user-provided floppy disk parameters
- setfiles(8)
- set file SELinux security contexts
- setfiles_selinux(8)
- Security Enhanced Policy for setfiles processes
- setfont(8)
- load EGA/VGA console screen font
- setkey(8)
- manually change IPsec SA/SP database
- setkey_selinux(8)
- Security Enhanced Policy for setkey processes
- setkeycodes(8)
- load kernel scancode-to-keycode mapping table entries
- setpci(8)
- configure PCI devices
- setquota(8)
- set disk quotas
- setrans_selinux(8)
- Security Enhanced Policy for setrans processes
- setroubleshoot_fixit_selinux(8)
- Security Enhanced Policy for setroubleshoot_fixit processes
- setroubleshoot_selinux(8)
- Security Enhanced Policy for setroubleshoot processes
- setroubleshootd(8)
- setroubleshoot daemon
- setroubleshootd_selinux(8)
- Security Enhanced Policy for setroubleshootd processes
- setsebool(8)
- set SELinux boolean value
- setsebool_selinux(8)
- Security Enhanced Policy for setsebool processes
- setserial(8)
- get/set serial port info
- setsid(8)
- run program in new session
- setsysfont(8)
- set console font according to /etc/sysconfig/i18n
- setup-ds-admin.pl(8)
- Set up instance of Directory Server/Admin Server
- setup-ds.pl(8)
- Set up instance of Directory Server
- seunshare(8)
- Run cmd with alternate homedir, tmpdir/SELinux context
- sfdisk(8)
- Partition table manipulator for
- sfex_init(8)
- Part of -HA project
- sftp-server(8)
- SFTP server subsystem
- sg3_utils(8)
- package of utilities for sending SCSI commands
- sg_dd(8)
- copies data to/from files/devices. Specialised for devices that understand SCSI command set
- sg_emc_trespass(8)
- Changes ownership of LUN from another Service-Processor to this one
- sg_format(8)
- format/resize SCSI disk
- sg_get_config(8)
- sends SCSI GET config command
- sg_get_lba_status(8)
- send SCSI GET LBA STATUS command
- sg_ident(8)
- sends SCSI REPORT/SET IDENTIFYING info command
- sg_inq(8)
- sends SCSI INQUIRY/ATA IDENTIFY DEVICE command/outputs response
- sg_logs(8)
- access log pages with SCSI LOG SENSE command
- sg_luns(8)
- send SCSI REPORT LUNS command
- sg_map(8)
- displays mapping between sg/other SCSI devices
- sg_map26(8)
- maps special file to SCSI generic device
- sg_modes(8)
- reads mode pages with SCSI MODE SENSE command
- sg_opcodes(8)
- reports info on supported SCSI commands/task management functions
- sg_persist(8)
- sends SCSI PERSISTENT RESERVE command to change registrations/reservations
- sg_prevent(8)
- sends SCSI PREVENT ALLOW MEDIUM REMOVAL command
- sg_raw(8)
- sends arbitrary SCSI command to device
- sg_rbuf(8)
- reads data using SCSI READ BUFFER command
- sg_rdac(8)
- Display/Modify RDAC Redundant Controller Page
- sg_read(8)
- read blocks of data continually from same offset
- sg_read_block_limits(8)
- sends SCSI READ BLOCK LIMITS command
- sg_read_buffer(8)
- send SCSI READ BUFFER command
- sg_read_long(8)
- send SCSI READ LONG command
- sg_readcap(8)
- sends SCSI READ CAPACITY command
- sg_reassign(8)
- sends SCSI REASSIGN BLOCKS command
- sg_requests(8)
- send one/more SCSI REQUEST SENSE commands
- sg_reset(8)
- sends SCSI device, target, bus or host reset; or checks reset state
- sg_rmsn(8)
- sends SCSI READ MEDIA SERIAL NUMBER command
- sg_rtpg(8)
- sends SCSI REPORT TARGET PORT GROUPS command
- sg_safte(8)
- Fetch status from SCSI Accessed Fault-Tolerant Enclosure device
- sg_sat_identify(8)
- sends ATA IDENTIFY DEVICE command via SCSI to ATA Translation layer
- sg_sat_phy_event(8)
- Sends ATA READ LOG EXT command via SAT pass through to fetch log page 11h which contains SATA phy event counters
- sg_sat_set_features(8)
- sends ATA SET FEATURES command via SCSI to ATA Translation layer
- sg_scan(8)
- does scan of sg devices/prints results
- sg_senddiag(8)
- performs SCSI SEND DIAGNOSTIC command
- sg_ses(8)
- send controls/fetch status from SCSI Enclosure Services device
- sg_start(8)
- send SCSI START STOP UNIT command to start, stop, load or eject medium
- sg_stpg(8)
- sends SCSI SET TARGET PORT GROUPS command
- sg_sync(8)
- send scsi command synchronize cache
- sg_test_rwbuf(8)
- Tests SCSI host adapter by issuing write/read operations on device's buffer/calculating checksums
- sg_turs(8)
- send one/more SCSI TEST UNIT READY commands
- sg_unmap(8)
- sends SCSI UNMAP command
- sg_verify(8)
- invoke SCSI VERIFY command on block device
- sg_vpd(8)
- fetches Vital Product Data pages using SCSI INQUIRY command
- sg_wr_mode(8)
- mode page
- sg_write_buffer(8)
- send SCSI WRITE BUFFER command
- sg_write_long(8)
- send SCSI WRITE LONG command
- sg_write_same(8)
- send SCSI WRITE SAME command
- sgdisk(8)
- GUID partition table manipulator for/Unix
- sge_ca(8)
- Sun Grid Engine CSP Support control command
- sge_execd(8)
- Sun Grid Engine job execution agent
- sge_execd_selinux(8)
- Security Enhanced Policy for sge_execd processes
- sge_helper_service.exe(8)
- Sun Grid Engine job execution agent helper service
- sge_job_selinux(8)
- Security Enhanced Policy for sge_job processes
- sge_qmaster(8)
- Sun Grid Engine master control daemon
- sge_selinux(8)
- Security Enhanced Policy for sge processes
- sge_shadowd(8)
- Sun Grid Engine shadow master daemon
- sge_shepherd(8)
- Sun Grid Engine single job controlling agent
- sge_shepherd_selinux(8)
- Security Enhanced Policy for sge_shepherd processes
- sge_st(8)
- Sun Grid Engine Service Tags Support control command
- sginfo(8)
- access mode page info for SCSI device
- sgm_dd(8)
- copies data to/from files/devices. Specialized for devices that understand SCSI command set/does memory mapped transfers from sg devices
- sgp_dd(8)
- copies data to/from files/devices. Specialized for devices that understand SCSI command set
- sha1hmac(8)
- compute/check HMAC values
- sha256hmac(8)
- compute/check HMAC values
- sha384hmac(8)
- compute/check HMAC values
- sha512hmac(8)
- compute/check HMAC values
- shake(8)
- Rewrite fragmented files, maybe improving performance
- sheep(8)
- Distributed Block Storage System for KVM
- shield-purge(8)
- This program is part of PAM-shield package
- shield-trigger(8)
- program used with pam_shield PAM module to manage ip blocking
- shield-trigger-iptables(8)
- program used with pam_shield PAM module to manage ip blocking
- shield-trigger-ufw(8)
- program used with pam_shield PAM module to manage ip blocking
- shinken-admin(8)
- Shinken admin shell
- shinken-arbiter(8)
- Shinken arbiter daemon
- shinken-broker(8)
- Shinken broker daemon
- shinken-discovery(8)
- Shinken discovery command
- shinken-poller(8)
- Shinken poller daemon
- shinken-reactionner(8)
- Shinken reactionner daemon
- shinken-receiver(8)
- Shinken receiver daemon
- shinken-scheduler(8)
- Shinken scheduler daemon
- shinken-skonf(8)
- Shinken daemon config tool
- shorewall(8)
- Administration tool for Shoreline Firewall
- shorewall-init(8)
- Companion package
- shorewall-lite(8)
- Administration tool for Shoreline Firewall Lite
- shorewall6(8)
- Administration tool for Shoreline Firewall 6
- shorewall6-lite(8)
- Administration tool for Shoreline 6 Firewall Lite
- shorewall_selinux(8)
- Security Enhanced Policy for shorewall processes
- showconsolefont(8)
- current EGA/VGA console screen font
- showmount(8)
- mount info for NFS server
- showmount_selinux(8)
- Security Enhanced Policy for showmount processes
- showq(8)
- Postfix mail queue
- showsel(8)
- firmware System Event Log records
- shutdown(8)
- bring system down
- shutdown_selinux(8)
- Security Enhanced Policy for shutdown processes
- siggen(8)
- signature gathering routine for Tripwire
- sigul_bridge(8)
- bridge that lets client access signing
- sigul_server(8)
- signing server
- sigul_server_add_admin(8)
- Add administrator account
- sigul_server_create_db(8)
- Create database used by
- sing(8)
- Send ICMP Nasty Garbage packets to network hosts
- sip2ncid(8)
- Inject CID info by snooping SIP invites
- sks(8)
- Synchronizing Key Server
- slapacl(8)
- Check access to list of attribs
- slapadd(8)
- Add entries to SLAPD database
- slapauth(8)
- Check list of string-represented IDs for LDAP authc/authz
- slapcat(8)
- SLAPD database to LDIF utility
- slapd(8)
- Stand-alone LDAP Daemon
- slapd_selinux(8)
- Security Enhanced Policy for slapd processes
- slapdn(8)
- Check list of string-represented LDAP DNs based on schema syntax
- slapindex(8)
- Reindex entries in SLAPD database
- slappasswd(8)
- OpenLDAP password utility
- slapschema(8)
- SLAPD in-database schema checking utility
- slaptest(8)
- Check suitability of OpenLDAP slapd.conf file
- slattach(8)
- attach network interface to serial line
- sln(8)
- create symbolic links
- slog(8)
- execute command as another user
- slpd_selinux(8)
- Security Enhanced Policy for slpd processes
- slurpd(8)
- Standalone LDAP Update Replication Daemon
- sm(8)
- Jabber IM session manager
- sm-notify(8)
- send reboot notifications to NFS peers
- smart(8)
- Smart Package Manager
- smartctl(8)
- Control/Monitor Utility for SMART Disks
- smartd(8)
- SMART Disk Monitoring Daemon
- smbcontrol_selinux(8)
- Security Enhanced Policy for smbcontrol processes
- smbd(8)
- server to provide SMB/CIFS services to clients
- smbd_selinux(8)
- Security Enhanced Policy for smbd processes
- smbldap-groupadd(8)
- Create new group
- smbldap-groupdel(8)
- Delete group
- smbldap-grouplist(8)
-
- smbldap-groupmod(8)
- Modify group
- smbldap-groupshow(8)
- group informations
- smbldap-passwd(8)
- change user password
- smbldap-populate(8)
- Populate your LDAP database
- smbldap-useradd(8)
- Create new user
- smbldap-userdel(8)
- Delete user account/related files
- smbldap-userinfo(8)
- change user real name, info and shell
- smbldap-userlist(8)
-
- smbldap-usermod(8)
- Modify user account
- smbldap-usershow(8)
- user account informations
- smbmnt(8)
- helper utility for mounting SMB filesystems
- smbmount(8)
- mount smbfs filesystem
- smbmount_selinux(8)
- Security Enhanced Policy for smbmount processes
- smbpasswd(8)
- change user's SMB password
- smbspool(8)
- send print file to SMB printer
- smbta-util(8)
- control encryption in VFS smb_traffic_analyzer
- smbumount(8)
- smbfs umount for normal users
- smem(8)
- Report memory usage with shared memory divided proportionally
- sminfo(8)
- query InfiniBand SMInfo attrib
- smmapd(8)
- Sendmail socket map daemon
- smokeping_selinux(8)
- Security Enhanced Policy for smokeping processes
- smoltclient_selinux(8)
- Security Enhanced Policy for smoltclient processes
- smp_conf_general(8)
- invoke CONFIGURE GENERAL SMP function
- smp_conf_route_info(8)
- invoke CONFIGURE ROUTE info SMP function
- smp_discover(8)
- invoke DISCOVER SMP function
- smp_discover_list(8)
- invoke DISCOVER LIST SMP function
- smp_phy_control(8)
- invoke PHY CONTROL SMP function
- smp_phy_test(8)
- invoke PHY TEST FUNTION SMP function
- smp_read_gpio(8)
- invoke READ GPIO REGISTER SMP function
- smp_rep_exp_route_tbl(8)
- invoke REPORT EXPANDER ROUTE TABLE LIST SMP function
- smp_rep_general(8)
- invoke REPORT GENERAL SMP function
- smp_rep_manufacturer(8)
- invoke REPORT MANUFACTURER info SMP function
- smp_rep_phy_err_log(8)
- invoke REPORT PHY ERROR LOG SMP function
- smp_rep_phy_sata(8)
- invoke REPORT PHY SATA SMP function
- smp_rep_route_info(8)
- invoke REPORT ROUTE info SMP function
- smp_utils(8)
- invoke Serial Attached SCSI Management function
- smp_write_gpio(8)
- invoke WRITE GPIO REGISTER SMP function
- smpdump(8)
- dump InfiniBand subnet management attribs
- smpquery(8)
- query InfiniBand subnet management attribs
- smrsh(8)
- restricted shell for sendmail
- smtp(8)
- Postfix SMTP+LMTP client
- smtpd(8)
- Postfix SMTP server
- smtpp(8)
- SMTP proxy gateway service
- snmp-ups(8)
- Multi-MIB Driver for SNMP UPS equipment
- snmpd(8)
- daemon to respond to SNMP request packets
- snmpd_selinux(8)
- Security Enhanced Policy for snmpd processes
- snmptrapd(8)
- Receive/log SNMP trap messages
- snort_selinux(8)
- Security Enhanced Policy for snort processes
- sntp(8)
- SNTP utility
- sockd(8)
- network proxyserver
- socklist(8)
- list of open sockets
- socks(8)
- SOCKS 4/4.5/5 gateway service
- solaris2mpm(8)
- Utility to convert Solaris packages, patches, and patch clusters into mpm archives
- solis(8)
- Driver for Brazilian Microsol SOLIS UPS equipment
- sosreport_selinux(8)
- Security Enhanced Policy for sosreport processes
- soundd_selinux(8)
- Security Enhanced Policy for soundd processes
- spacewalk-pylint(8)
- Pylint configured for Spacewalk
- spacewalk-service(8)
- control Spacewalk server
- spamass_milter_selinux(8)
- Security Enhanced Policy for spamass_milter processes
- spamass_selinux(8)
- Security Enhanced Policy for spamass processes
- spamc_selinux(8)
- Security Enhanced Policy for spamc processes
- spamd_selinux(8)
- Security Enhanced Policy for spamd processes
- spawn(8)
- Postfix external command spawner
- spectrumctl(8)
- Utility to control one/more spectrum instances
- sqback(8)
- send sagator's quarantined files back to mail queue
- squatter(8)
- create SQUAT indexes for mailboxes
- squid(8)
- proxy caching server
- squid_db_auth(8)
- Database auth helper for Squid
- squid_ldap_auth(8)
- Squid LDAP authentication helper
- squid_ldap_group(8)
- Squid LDAP external acl group helper
- squid_radius_auth(8)
- Squid RADIUS authentication helper
- squid_selinux(8)
- Security Enhanced Policy for squid processes
- squid_session(8)
- Squid session tracking external acl group helper
- squid_unix_group(8)
- Squid UNIX Group external_acl helper
- srcpd(8)
- SRCP speaking daemon
- sreplay(8)
- replay log file created with slog/sslogger
- srvsvcd_selinux(8)
- Security Enhanced Policy for srvsvcd processes
- ss(8)
- another utility to investigate sockets
- sserver(8)
- sample Kerberos server
- ssh-keysign(8)
- ssh helper program for host-based authentication
- ssh-ldap-helper(8)
- sshd helper program for ldap support
- ssh_keygen_selinux(8)
- Security Enhanced Policy for ssh_keygen processes
- ssh_keysign_selinux(8)
- Security Enhanced Policy for ssh_keysign processes
- ssh_selinux(8)
- Security Enhanced Policy for ssh processes
- sshd(8)
- OpenSSH SSH daemon
- sshd_selinux(8)
- Security Enhanced Policy for sshd processes
- sshmitm(8)
- SSH monkey-in--middle
- sshow(8)
- SSH traffic analysis tool
- sshuttle(8)
- transparent proxy-based VPN using ssh
- ssi(8)
- server-side-includes CGI program
- sslh(8)
-
- sslogger(8)
- execute command or interactive shell, and record output
- sslogger-slogd(8)
- remote log collection server for sslogger
- ssmtp(8)
- send message using smtp
- sss_cache(8)
- perform cache cleanup
- sss_debuglevel(8)
- change debug level while SSSD is running
- sss_groupadd(8)
- create new group
- sss_groupdel(8)
- delete group
- sss_groupmod(8)
- modify group
- sss_groupshow(8)
- print properties of group
- sss_obfuscate(8)
- obfuscate clear text password
- sss_seed(8)
- seed SSSD cache with user
- sss_useradd(8)
- create new user
- sss_userdel(8)
- delete user account
- sss_usermod(8)
- modify user account
- sssd(8)
- System Security Services Daemon
- sssd_krb5_locator_plugin(8)
- config file for SSSD
- sssd_selinux(8)
- Security Enhanced Policy for sssd processes
- st(8)
- manage swift containers
- staff_selinux(8)
- Administrator's unprivileged user - Security Enhanced
- stap-authorize-server-cert(8)
- systemtap server authorization utility
- stap-authorize-signing-cert(8)
- systemtap signing authorization utility
- stap-client(8)
- systemtap client
- stap-server(8)
- systemtap compile server management
- staprun(8)
- systemtap runtime
- start(8)
- init daemon control tool
- start-dirsrv(8)
- start script for Directory Server
- start-ds-admin(8)
- start script for Admin Server
- statd(8)
- NSM service daemon
- status(8)
- init daemon control tool
- stinit(8)
- initialize SCSI magnetic tape drives
- stonith_admin(8)
- Part of Pacemaker cluster resource manager
- stop(8)
- init daemon control tool
- stop-dirsrv(8)
- stop script for Directory Server
- stop-ds-admin(8)
- stop script for Admin Server
- stow(8)
- software package installation manager
- strongswan(8)
- invoke IPsec utilities
- strongswan__updown(8)
- route/firewall change script
- strongswan__updown_espmark(8)
- manages routes/firewall rules
- strongswan_openac(8)
- Generation of X.509 attrib certificates
- strongswan_pluto(8)
- IPsec IKE keying daemon/control interface
- strongswan_scepclient(8)
- Client for SCEP protocol
- stunnel(8)
- universal SSL tunnel
- stunnel_selinux(8)
- Security Enhanced Policy for stunnel processes
- subscription-manager(8)
- Register machines/manage subscriptions to products
- subscription-manager-gui(8)
- Launches UI client of Subscription Manager
- sudo(8)
- execute command as another user
- sudo_plugin(8)
- Sudo Plugin API
- sudoedit(8)
- execute command as another user
- sudoreplay(8)
- replay sudo session logs
- sudosh-replay(8)
- view/replay sudosh sessions
- suexec(8)
- Switch user before executing external programs
- sulogin(8)
- Single-user login
- sulogin_selinux(8)
- Security Enhanced Policy for sulogin processes
- superiotool(8)
- Super I/O detection tool
- superpaco(8)
- Debian, RPM or Slackware package installation support for paco
- sushell(8)
- execute single-user shell
- svc_multilog_selinux(8)
- Security Enhanced Policy for svc_multilog processes
- svc_run_selinux(8)
- Security Enhanced Policy for svc_run processes
- svc_selinux(8)
- Security Enhanced Policy for svc processes
- svc_start_selinux(8)
- Security Enhanced Policy for svc_start processes
- svcgssd(8)
- server-side rpcsec_gss daemon
- svnserve(8)
- Server for 'svn' repository access method
- svnserve_selinux(8)
- Security Enhanced Policy for svnserve processes
- swapoff(8)
- enable/disable devices/files for paging/swapping
- swapon(8)
- enable/disable devices/files for paging/swapping
- swat(8)
- Samba Web Administration Tool
- swat_selinux(8)
- Security Enhanced Policy for swat processes
- swift-account-audit(8)
- manually audit swift accounts
- swift-account-auditor(8)
- daemon that audits swift accounts
- swift-account-reaper(8)
- daemon that removes data from deleted swift accounts
- swift-account-replicator(8)
- daemon that replicates swift accounts
- swift-account-server(8)
- daemon that serves swift account data
- swift-auth-create-account(8)
- create swift user account
- swift-auth-recreate-accounts(8)
- re-create user accounts
- swift-auth-server(8)
- swift user account daemon
- swift-container-auditor(8)
- daemon that audits swift containers
- swift-container-replicator(8)
- daemon that replicates swift containers
- swift-container-server(8)
- daemon that lists content of containers
- swift-container-updater(8)
- daemon that updates container info
- swift-drive-audit(8)
- update drive info
- swift-get-nodes(8)
- responsible node
- swift-init(8)
- manage swift servers
- swift-object-auditor(8)
- daemon that audits swift objects
- swift-object-info(8)
- object info
- swift-object-replicator(8)
- daemon that replicates swift objects
- swift-object-server(8)
- daemon that serves objects
- swift-object-updater(8)
- update object info in container listings
- swift-proxy-server(8)
- centralize swift daemon
- swift-ring-builder(8)
- assigns partitions to devices/writes ring structure
- swift-stats-populate(8)
- run dispersion/performance population
- swift-stats-report(8)
- run various swift reports
- switch_root(8)
- switch to another filesystem as root of mount tree
- symlinks(8)
- symbolic link maintenance utility
- synaptic(8)
- graphical management of software packages
- sync(8)
- synchronize data on disk with memory
- sync_client(8)
- client side of synchronization engine
- sync_reset(8)
- Account reset utility. DANGER
- sync_server(8)
- server side of synchronization engine
- synce-serial-abort(8)
- Force SynCE serial connection to abort
- synce-serial-config(8)
- Configure serial device for use with SynCE
- synce-serial-start(8)
- Start serial connection for use with SynCE
- sys-unconfig(8)
- reconfigure system upon next boot
- sysadm_selinux(8)
- General system administration role - Security Enhanced Policy
- sysctl(8)
- configure kernel parameters at runtime
- sysklogd(8)
- system logging utilities
- syslog-ng(8)
- syslog-ng system logger application
- syslogd(8)
- system logging utilities
- syslogd_selinux(8)
- Security Enhanced Policy for syslogd processes
- syslogtocern(8)
- convert thttpd syslog entries into CERN Common Log format
- sysstat_selinux(8)
- Security Enhanced Policy for sysstat processes
- system-cdinstall-helper(8)
- Install packages from local media
- system-config-authentication(8)
- GUI utility for configuring user identity/system authentication services
- system-config-date(8)
- graphical interface for changing system date/time
- system-config-kickstart(8)
- graphical interface for creating kickstart files
- system-config-netboot(8)
- Network Booting config Utility
- system-config-services(8)
- Service config Utility
- system-config-users(8)
- User/Group Management tool
- system-install-packages(8)
- Install/update list of packages
- system-logviewer(8)
- graphical interface for viewing log files
- t1libconfig(8)
- create t1lib.config/FontDataBase files for t1lib
- tagtest(8)
- Hyla FAX tag line testing program
- talkd(8)
- remote user communication server
- tally.control(8)
- keep track of newsgroup creations/deletions
- targetcli(8)
-
- tc(8)
- show/change traffic control settings
- tc-bfifo(8)
- Packet limited First In, First Out queue
- tc-cbq(8)
- Class Based Queueing
- tc-cbq-details(8)
- Class Based Queueing
- tc-htb(8)
- Hierarchy Token Bucket
- tc-pbfifo(8)
- Packet limited First In, First Out queue
- tc-pfifo(8)
- Packet limited First In, First Out queue
- tc-pfifo_fast(8)
- three-band first in, first out queue
- tc-prio(8)
- Priority qdisc
- tc-red(8)
- Random Early Detection
- tc-sfq(8)
- Stochastic Fairness Queueing
- tc-tbf(8)
- Token Bucket Filter
- tcpd(8)
- access control facility for internet services
- tcpd_selinux(8)
- Security Enhanced Policy for tcpd processes
- tcpdump(8)
- dump traffic on network
- tcpick(8)
- tcp stream sniffer/connection tracker
- tcpkill(8)
- kill TCP connections on LAN
- tcplay(8)
- manage TrueCrypt volumes
- tcpnice(8)
- slow down TCP connections on LAN
- tcppm(8)
- TCP port mapper
- tcpslice(8)
- extract pieces of/merge together tcpdump files
- tcptraceroute6(8)
- IPv6 traceroute tool
- tcsd(8)
- daemon that manages Trusted Computing resources
- tdbbackup(8)
- tool for backing up/for validating integrity of samba .tdb files
- tdbdump(8)
- tool for printing contents of TDB file
- tdbrestore(8)
- tool for creating TDB file out of tdbdump output
- tdbtool(8)
- change contents TDB files
- tdx-util(8)
- Tradindexed overview change utility
- telepathy-gabble(8)
- Telepathy connection manager for XMPP
- telepathy-salut(8)
- Telepathy connection manager for link-local XMPP
- telepathy_gabble_selinux(8)
- Security Enhanced Policy for telepathy_gabble processes
- telepathy_idle_selinux(8)
- Security Enhanced Policy for telepathy_idle processes
- telepathy_mission_control_selinux(8)
- Security Enhanced Policy for telepathy_mission_control processes
- telepathy_msn_selinux(8)
- Security Enhanced Policy for telepathy_msn processes
- telepathy_salut_selinux(8)
- Security Enhanced Policy for telepathy_salut processes
- telepathy_selinux(8)
- Security Enhanced Policy for telepathy processes
- telepathy_sofiasip_selinux(8)
- Security Enhanced Policy for telepathy_sofiasip processes
- telepathy_stream_engine_selinux(8)
- Security Enhanced Policy for telepathy_stream_engine processes
- telepathy_sunshine_selinux(8)
- Security Enhanced Policy for telepathy_sunshine processes
- telescoped(8)
- control telescope, server
- telinit(8)
- change system runlevel
- telnetd(8)
- DARPA telnet protocol server
- telnetd_selinux(8)
- Security Enhanced Policy for telnetd processes
- testapp_selinux(8)
- Security Enhanced Policy for testapp processes
- testdisk(8)
- Scan/repair disk partitions
- testsaslauthd(8)
- test utility for SASL authentication server
- tethereal_selinux(8)
- Security Enhanced Policy for tethereal processes
- texlinks(8)
- maintain symbolic links from format to engine
- texpire(8)
- delete old news articles/repair leafnode news
- tftpd(8)
- IPv4 Trivial File Transfer Protocol server
- tftpd_selinux(8)
- Security Enhanced Policy for tftpd processes
- tgt-admin(8)
- SCSI Target config Tool
- tgt-setup-lun(8)
- Helper script that creates target, adds device to target, and defines initiators that can connect to target
- tgtadm(8)
- SCSI Target Administration Utility
- tgtd_selinux(8)
- Security Enhanced Policy for tgtd processes
- thin_check(8)
- repair thin provisioning metadata on device/file
- thin_dump(8)
- dump thin provisioning metadata from device/file to standard
- thin_restore(8)
- restore thin provisioning metadata file to device/
- thin_selinux(8)
- Security Enhanced Policy for thin processes
- thttpd(8)
- tiny/turbo/throttling HTTP server
- tickadj(8)
- set time-related kernel variables
- tiff2fax(8)
- convert TIFF for facsimile transmission by Hyla FAX
- tiffcheck(8)
- check TIFF for Hyla FAX conversion requirements
- timelord(8)
- Macintosh time server daemon
- timsieved(8)
- CMU hack for getting sieve scripts onto server
- tincd(8)
- tinc VPN daemon
- tinydns(8)
- DNS server
- tinyproxy(8)
- light-weight HTTP proxy daemon
- tito(8)
- manage RPM based projects using git
- tls_prune(8)
- prune expired sessions from TLS sessions database
- tlsmgr(8)
- Postfix TLS session cache/PRNG manager
- tmconfig(8)
- configure system for Serial/EMP management functions, such as Terminal Mode, and share port with Serial Console
- tmpreaper_selinux(8)
- Security Enhanced Policy for tmpreaper processes
- tmpwatch(8)
- removes files which haven't been accessed for period of time
- togglesebool(8)
- flip current value of SELinux boolean
- tor_selinux(8)
- Security Enhanced Policy for tor processes
- torsocks(8)
- Library for intercepting outgoing network connections/redirecting them through SOCKS server
- torus-2qos(8)
- Routing engine for OpenSM subnet manager
- tpm_changeownerauth(8)
- change authorization data associated with owner/SRK
- tpm_clear(8)
- return TPM to default state
- tpm_createek(8)
- create Endorsement Key Pair on TPM
- tpm_getpcrhash(8)
-
- tpm_getpubek(8)
- public portion of TPM's Endorsement Key
- tpm_getquote(8)
-
- tpm_loadkey(8)
-
- tpm_mkaik(8)
-
- tpm_mkuuid(8)
-
- tpm_quote_tools(8)
-
- tpm_resetdalock(8)
- reset dictionary attack lock for user
- tpm_restrictpubek(8)
- restrict ability to display public portion of Endorsement Key to owner
- tpm_revokeek(8)
- revokes Endorsement Key Pair of TPM
- tpm_selftest(8)
- request TPM perform selftest/report
- tpm_setactive(8)
- change TPM active states
- tpm_setclearable(8)
- disable TPM clear operations
- tpm_setenable(8)
- change TPM enable states
- tpm_setoperatorauth(8)
- sets operator authorization value in TPM
- tpm_setownable(8)
- change whether TPM allows tpm_takeownership operations
- tpm_setpresence(8)
-
- tpm_takeownership(8)
- setup owner on TPM
- tpm_unloadkey(8)
-
- tpm_updatepcrhash(8)
-
- tpm_verifyquote(8)
-
- trace(8)
- Postfix delivery status reports
- tracepath(8)
- traces path to network host discovering MTU along this path
- tracepath6(8)
- traces path to network host discovering MTU along this path
- traceproto(8)
- trace route to destination using specified protocol
- traceroute(8)
- print route packets trace to network host
- traceroute6(8)
- print route packets trace to network host
- traceroute_selinux(8)
- Security Enhanced Policy for traceroute processes
- tracert6(8)
- IPv6 traceroute tool
- trickled(8)
- userspace bandwidth manager daemon
- tripplite(8)
- Driver for Tripp-Lite SmartPro UPS equipment
- tripplite_usb(8)
- Driver for older Tripp Lite USB UPSes
- tripplitesu(8)
- Driver for Tripp-Lite SmartOnline UPS equipment
- tripwire(8)
- file integrity checker for UNIX systems
- trivial-rewrite(8)
- Postfix address rewriting/resolving daemon
- try-from(8)
- test program for tcp_wrapper
- tsitest(8)
- Hyla FAX TSI access control list checking program
- tsocks(8)
- Library for intercepting outgoing network connections/redirecting them through SOCKS server
- ttysnoop(8)
- snoop on user's tty
- ttywatch(8)
- log output of arbitrarily many tty devices
- tunctl(8)
- create/manage persistent TUN/TAP interfaces
- tune2fs(8)
- adjust tunable filesystem parameters on ext2/ext3/ext4 filesystems
- tune4fs(8)
- adjust tunable filesystem parameters on ext2/ext3/ext4 filesystems
- tuned(8)
- dynamic adaptive system tuning daemon
- tuned_selinux(8)
- Security Enhanced Policy for tuned processes
- tunefs.reiserfs(8)
- reiserfs filesystem tuning program
- tunegfs2(8)
- View/change gfs2 superblocks
- tunelp(8)
- set various parameters for lp device
- tvtime_selinux(8)
- Security Enhanced Policy for tvtime processes
- twadmin(8)
- Tripwire administrative/utility tool
- twintro(8)
- introduction to Tripwire software
- twprint(8)
- Tripwire database/report printer
- typetest(8)
- Program for testing out typerules
- tyrion(8)
- Tyrion service daemon
- tzdata_selinux(8)
- Security Enhanced Policy for tzdata processes
- tzselect(8)
- select timezone
- uberkey(8)
- keylogger
- udev(8)
- configurable dynamic device naming support
- udev_selinux(8)
- Security Enhanced Policy for udev processes
- udevadm(8)
- udev management tool
- udevcontrol(8)
- event managing daemon
- udevd(8)
- event managing daemon
- udevinfo(8)
- query device info from udev database
- udevmonitor(8)
- print kernel/udev event sequence to console
- udevsend(8)
- event managing daemon
- udevsettle(8)
- wait until queued kernel/udev events are handled
- udevstart(8)
- populate initial device directory
- udevtest(8)
- simulate udev run/print action to console
- udevtrigger(8)
- request kernel devices events for coldplug
- udisks-daemon(8)
- udisks Daemon
- udppm(8)
- UDP port mapper
- ulogd_selinux(8)
- Security Enhanced Policy for ulogd processes
- uml_selinux(8)
- Security Enhanced Policy for uml processes
- uml_switch_selinux(8)
- Security Enhanced Policy for uml_switch processes
- umount(8)
- unmount file systems
- umount.cifs(8)
- for normal, non-root users, to unmount their own Common Internet File System mounts
- umount.davfs(8)
- Umount-helper to unmount davfs2 file system
- umount.ecryptfs(8)
- eCryptfs umount helper
- umount.nfs(8)
- unmount Network File System
- umount.nfs4(8)
- unmount Network File System
- unattr(8)
- remove choosen xattr from files, recursively
- unbound(8)
- Unbound DNS validating resolver 1.4.19
- unbound-anchor(8)
- Unbound anchor utility
- unbound-checkconf(8)
- Check unbound config file for errors
- unbound-control(8)
- Unbound remote server control utility
- unconfined_notrans_selinux(8)
- Security Enhanced Policy for unconfined_notrans processes
- unconfined_selinux(8)
- Unconfiend user role - Security Enhanced Policy
- unexpunge(8)
- restore expunged messages
- unfsd(8)
- NFS server process
- unhide(8)
- find hidden processes
- unhide-tcp(8)
- find hidden TCP/UDP ports
- unionfs(8)
- userspace unionfs implementation
- unionfs-fuse(8)
- userspace unionfs implementation
- unix_chkpwd(8)
- Helper binary that verifies password of current user
- unix_update(8)
- Helper binary that updates password of given user
- unregister-common-lisp-implementation(8)
- internal clc commands
- unregister-common-lisp-source(8)
- internal clc commands
- unzsplit(8)
- will read splitted files produced by zsplit, glue and decompress them to its origin
- up2date(8)
- program for updating packages on Red Hat Enterprise
- update-alternatives(8)
- maintain symbolic links determining default commands
- update-pciids(8)
- download new version of PCI ID list
- update-reader.conf(8)
- make /etc/reader.conf
- update-smart-drivedb(8)
- smartmontools drive database update script
- update_modules_selinux(8)
- Security Enhanced Policy for update_modules processes
- update_selinux(8)
- Security Enhanced Policy for update processes
- updatedb(8)
- update database for mlocate
- updfstab_selinux(8)
- Security Enhanced Policy for updfstab processes
- updpwd_selinux(8)
- Security Enhanced Policy for updpwd processes
- upsc(8)
- example lightweight UPS client
- upscmd(8)
- UPS administration program for instant commands
- upscode2(8)
- Driver for UPScode II compatible UPS equipment
- upsd(8)
- UPS info server
- upsdrvctl(8)
- UPS driver controller
- upsimage.cgi(8)
- Image-generating helper for upsstats.cgi
- upslog(8)
- UPS status logger
- upsmon(8)
- UPS monitor/shutdown controller
- upsrw(8)
- UPS variable administration tool
- upssched(8)
- Timer helper for scheduling events from upsmon
- upsset.cgi(8)
- Web-based UPS administration program
- upsstats.cgi(8)
- Web-based UPS status viewer
- urlsnarf(8)
- sniff HTTP requests in Common Log Format
- usbhid-ups(8)
- Driver for USB/HID UPS equipment
- usbmodules(8)
- kernel driver modules available for plugged in USB device
- usbmodules_selinux(8)
- Security Enhanced Policy for usbmodules processes
- usbmuxd_selinux(8)
- Security Enhanced Policy for usbmuxd processes
- usbview(8)
- info on USB devices
- user_selinux(8)
- Generic unprivileged user - Security Enhanced Policy
- useradd(8)
- create new user/update default new user info
- useradd_selinux(8)
- Security Enhanced Policy for useradd processes
- userdel(8)
- delete user account/related files
- userhelper(8)
- helper interface to PAM
- userisdnctl(8)
- Control/setup ISDN parameters
- usermod(8)
- modify user account
- usernetctl(8)
- allow user to change network interface if permitted
- usernetctl_selinux(8)
- Security Enhanced Policy for usernetctl processes
- utempter_selinux(8)
- Security Enhanced Policy for utempter processes
- uucico(8)
- UUCP file transfer daemon
- uucpd_selinux(8)
- Security Enhanced Policy for uucpd processes
- uuidd(8)
- UUID generation daemon
- uuidd_selinux(8)
- Security Enhanced Policy for uuidd processes
- uux_selinux(8)
- Security Enhanced Policy for uux processes
- uuxqt(8)
- UUCP execution daemon
- v4l-conf(8)
- configure video4linux driver
- validate-sat-cert(8)
- utility that checks XML parse sanity/GPG validates RHN Satellite certificate
- validate-sat-cert.pl(8)
- utility that checks XML parse sanity/GPG validates RHN Satellite certificate
- varnetload(8)
- create reproducable network traffic
- varnishd_selinux(8)
- Security Enhanced Policy for varnishd processes
- varnishlog_selinux(8)
- Security Enhanced Policy for varnishlog processes
- vbetool_selinux(8)
- Security Enhanced Policy for vbetool processes
- vboxd(8)
- isdn voice box daemon
- vboxgetty(8)
- isdn voice box
- vboxmail(8)
- send notification of new voice message
- vboxputty(8)
- self-dialing/-calling vboxgetty
- vconfig(8)
- VLAN config program
- vdagent_selinux(8)
- Security Enhanced Policy for vdagent processes
- vendstat(8)
- query InfiniBand vendor specific functions
- verify(8)
- Postfix address verification server
- vfs_acl_tdb(8)
- Save NTFS-ACLs in tdb file
- vfs_acl_xattr(8)
- Save NTFS-ACLs in Extended attribs
- vfs_aio_fork(8)
- implement async I/O in Samba vfs
- vfs_aio_linux(8)
- implement async I/O in Samba vfs using kernel aio calls
- vfs_aio_pthread(8)
- implement async I/O in Samba vfs using pthread pool
- vfs_audit(8)
- record selected Samba VFS operations in system log
- vfs_cacheprime(8)
- prime kernel file data cache
- vfs_cap(8)
- CAP encode filenames
- vfs_catia(8)
- translate illegal char in Catia filenames
- vfs_commit(8)
- flush dirty data at specified intervals
- vfs_crossrename(8)
- server side rename files across filesystem boundaries
- vfs_default_quota(8)
- store default quota records for Windows clients
- vfs_dirsort(8)
- Sort directory contents
- vfs_extd_audit(8)
- record selected Samba VFS operations
- vfs_fake_perms(8)
- enable read only Roaming Profiles
- vfs_fileid(8)
- Generates file_id structs with unique device id values for cluster setups
- vfs_full_audit(8)
- record Samba VFS operations in system log
- vfs_gpfs(8)
- gpfs specific samba extensions like acls/prealloc
- vfs_media_harmony(8)
- Allow multiple Avid clients to share network drive
- vfs_netatalk(8)
- hide .AppleDouble files from CIFS clients
- vfs_notify_fam(8)
- FAM support for file change notifications
- vfs_prealloc(8)
- preallocate matching files to predetermined size
- vfs_preopen(8)
- Hide read latencies for applications reading numbered files
- vfs_readahead(8)
- pre-load kernel buffer cache
- vfs_readonly(8)
- make Samba share read only for specified time period
- vfs_recycle(8)
- Samba VFS recycle bin
- vfs_scannedonly(8)
- Ensures that only files that have been scanned for viruses are visible/accessible to end user
- vfs_shadow_copy(8)
- Make Samba share read only for specified time period
- vfs_shadow_copy2(8)
- Expose snapshots to Windows clients as shadow copies
- vfs_smb_traffic_analyzer(8)
- log Samba VFS read/write operations through socket to helper application
- vfs_streams_depot(8)
- EXPERIMENTAL module to store alternate data streams in central directory
- vfs_streams_xattr(8)
- Store alternate data streams in posix xattrs
- vfs_time_audit(8)
- samba vfs module to log slow VFS operations
- vfs_tsmsm(8)
- VFS module for handling offline files with Tivoli Storage Manager Space Management
- vfs_xattr_tdb(8)
- Save Extended attribs in tdb file
- vga_reset(8)
- reset video graphic board
- vgcfgbackup(8)
- backup volume group descriptor area
- vgcfgrestore(8)
- restore volume group descriptor area
- vgchange(8)
- change attribs of volume group
- vgck(8)
- check volume group metadata
- vgconvert(8)
- convert volume group metadata format
- vgcreate(8)
- create volume group
- vgdisplay(8)
- attribs of volume groups
- vgetty(8)
- voice extension to mgetty+sendfax program
- vgexport(8)
- make volume groups unknown to system
- vgextend(8)
- add physical volumes to volume group
- vgimport(8)
- make exported volume groups known to system
- vgimportclone(8)
- import/rename duplicated volume group
- vgmerge(8)
- merge two volume groups
- vgmknodes(8)
- recreate volume group directory/logical volume special files
- vgreduce(8)
- reduce volume group
- vgremove(8)
- remove volume group
- vgrename(8)
- rename volume group
- vgs(8)
- report info about volume groups
- vgscan(8)
- scan all disks for volume groups/rebuild caches
- vgsplit(8)
- split volume group into two
- vhostmd_selinux(8)
- Security Enhanced Policy for vhostmd processes
- victronups(8)
- Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
- vidmode(8)
- query/set image root device, RAM disk size, or video mode
- vigr(8)
- edit password, group, shadow-password or shadow-group file
- vipw(8)
- edit password, group, shadow-password or shadow-group file
- virt-sanlock-cleanup(8)
-
- virt-who(8)
- Agent for reporting virtual guest IDs to Subscription Asset Manager
- virt_bridgehelper_selinux(8)
- Security Enhanced Policy for virt_bridgehelper processes
- virt_qemu_ga_selinux(8)
- Security Enhanced Policy for virt_qemu_ga processes
- virt_qmf_selinux(8)
- Security Enhanced Policy for virt_qmf processes
- virt_selinux(8)
- Security Enhanced Policy for virtd processes
- virtd_selinux(8)
- Security Enhanced Policy for virtd processes
- virtual(8)
- Postfix virtual domain mail delivery agent
- visudo(8)
- edit sudoers file
- vmstat(8)
- Report virtual memory statistics
- vmtouch(8)
- Virtual Memory Toucher
- vmware_host_selinux(8)
- Security Enhanced Policy for vmware_host processes
- vmware_selinux(8)
- Security Enhanced Policy for vmware processes
- vol_id(8)
- probe filesystem type/read label/uuid
- volume_key(8)
- work with volume encryption secrets/escrow packets
- voms(8)
- VOMS server
- votequorum_overview(8)
- Votequorum Library Overview
- vpcd(8)
- virtual power control daemon
- vpddecode(8)
- VPD structure decoder
- vpnc(8)
- client for Cisco VPN3000 Concentrator, IOS and PIX
- vpnc_selinux(8)
- Security Enhanced Policy for vpnc processes
- vsftpd(8)
- Very Secure FTP Daemon
- vtun(8)
- VTun daemon
- vtund(8)
- VTun daemon
- walldns(8)
- reverse DNS wall
- waproamd(8)
- Wireless Access Point Roaming Daemon for WLAN IEEE 802.11
- warnquota(8)
- send mail to users over quota
- watch-mimedefang(8)
- Keep eye on mimedefang-multiplexor
- watch-multiple-mimedefangs(8)
- Keep eye on cluster of MIMEDefang machines
- watchdog(8)
- software watchdog daemon
- wd_keepalive(8)
- simplified software watchdog daemon
- wdmd(8)
- watchdog multiplexing daemon
- wdmd_selinux(8)
- Security Enhanced Policy for wdmd processes
- wdt(8)
- display/set WatchDog Timer parameters
- webadm_selinux(8)
- Web administrator role - Security Enhanced Policy
- webalizer_selinux(8)
- Security Enhanced Policy for webalizer processes
- webmitm(8)
- HTTP/HTTPS monkey-in--middle
- webspy(8)
- sniffed URLs in Netscape in real-time
- wedged(8)
- Hyla FAX modem wedged script
- whob(8)
- whois-type info of interest to Internet operators
- wicd(8)
- Wired/Wireless Network Connection Manager
- wicd-cli(8)
- commandline- only wicd controller
- wicd-curses(8)
- curses-based wicd controller
- winbind_helper_selinux(8)
- Security Enhanced Policy for winbind_helper processes
- winbind_selinux(8)
- Security Enhanced Policy for winbind processes
- winbindd(8)
- Name Service Switch daemon for resolving names from NT servers
- wine_selinux(8)
- Security Enhanced Policy for wine processes
- wipefs(8)
- wipe filesystem signature from device
- wire-test(8)
- test your network interfaces/local IP address
- wlanconfig(8)
- Create, destroy and change madwifi VAPs
- wpa_background(8)
- Background info on Wi-Fi Protected Access/IEEE 802.11i
- wpa_cli(8)
- WPA client
- wpa_cli_selinux(8)
- Security Enhanced Policy for wpa_cli processes
- wpa_gui(8)
- WPA Graphical User Interface
- wpa_passphrase(8)
- make WPA PSK from ASCII passphrase for SSID
- wpa_priv(8)
- wpa_supplicant privilege separation helper
- wpa_selinux(8)
- Security Enhanced Policy for wpa processes
- wpa_supplicant(8)
- Wi-Fi Protected Access client/IEEE 802.1X supplicant
- writelog(8)
- add entry to INN log file
- x86_64(8)
- change reported architecture in new program environment/set personality flags
- xauth_selinux(8)
- Security Enhanced Policy for xauth processes
- xdm_selinux(8)
- Security Enhanced Policy for xdm processes
- xenconsoled_selinux(8)
- Security Enhanced Policy for xenconsoled processes
- xend_selinux(8)
- Security Enhanced Policy for xend processes
- xenstored_selinux(8)
- Security Enhanced Policy for xenstored processes
- xentrace(8)
- capture Xen trace buffer data
- xferfaxstats(8)
- summarize Hyla FAX transmission accounting
- xferstats(8)
- compiles info about file transfers from logfiles
- xfs_admin(8)
- change parameters of XFS filesystem
- xfs_bmap(8)
- print block mapping for XFS file
- xfs_check(8)
- check XFS filesystem consistency
- xfs_copy(8)
- copy contents of XFS filesystem
- xfs_db(8)
- debug XFS filesystem
- xfs_estimate(8)
- estimate space that XFS filesystem will take
- xfs_freeze(8)
- suspend access to XFS filesystem
- xfs_fsr(8)
- filesystem reorganizer for XFS
- xfs_growfs(8)
- expand XFS filesystem
- xfs_info(8)
- expand XFS filesystem
- xfs_io(8)
- debug I/O path of XFS filesystem
- xfs_logprint(8)
- print log of XFS filesystem
- xfs_mdrestore(8)
- restores XFS metadump image to filesystem image
- xfs_metadump(8)
- copy XFS filesystem metadata to file
- xfs_mkfile(8)
- create XFS file
- xfs_ncheck(8)
- make pathnames from i-numbers for XFS
- xfs_quota(8)
- manage use of quota on XFS filesystems
- xfs_repair(8)
- repair XFS filesystem
- xfs_rtcp(8)
- XFS realtime copy command
- xfs_selinux(8)
- Security Enhanced Policy for xfs processes
- xfsdump(8)
- XFS filesystem incremental dump utility
- xfsinvutil(8)
- xfsdump inventory database checking/pruning utility
- xfsrestore(8)
- XFS filesystem incremental restore utility
- xguest_selinux(8)
- Least priviledged X user - Security Enhanced Policy
- xinetd(8)
- extended Internet services daemon
- xl2tpd(8)
- Layer 2 Tunnelling Protocol Daemon
- xlatencytop(8)
- tool for developers to visualize system latencies
- xm_selinux(8)
- Security Enhanced Policy for xm processes
- xpp_blink(8)
- Blink leds of specified XPD
- xpp_sync(8)
- Handle sync selection of Xorcom Astribanks
- xqmstats(8)
- XFS quota manager statistics from /proc
- xrdcnsd(8)
- Cluster Name Space daemon
- xrdp(8)
- Remote Desktop Protocol server
- xrdp-sesman(8)
- xrdp session manager
- xrdp-sesrun(8)
- sesman session launcher
- xrdpwdadmin(8)
- administer pwd security protocol passwords
- xrdsssadmin(8)
- administer simple shared secret keytables
- xrootd(8)
- eXtended ROOT daemon
- xserver_selinux(8)
- Security Enhanced Policy for xserver processes
- yaz-config(8)
- get info about YAZ
- yaz-ztest(8)
- Z39.50 Test Server
- yersinia(8)
- FrameWork for layer 2 attacks
- ypbind(8)
- NIS binding process
- ypbind_selinux(8)
- Security Enhanced Policy for ypbind processes
- yphelper(8)
- helper application for internal use
- ypinit(8)
- NIS database install/build program
- yppasswdd(8)
- NIS password update daemon
- yppasswdd_selinux(8)
- Security Enhanced Policy for yppasswdd processes
- yppoll(8)
- return version/master server of NIS map
- yppush(8)
- force propagation of changed NIS databases
- ypserv(8)
- NIS server
- ypserv_selinux(8)
- Security Enhanced Policy for ypserv processes
- ypset(8)
- bind ypbind to particular NIS server
- yptest(8)
- test NIS config
- ypxfr(8)
- transfer NIS database from remote server to local host
- ypxfr_selinux(8)
- Security Enhanced Policy for ypxfr processes
- ypxfrd(8)
- NIS map transfer server
- yum(8)
- Yellowdog Updater Modified
- yum-arch(8)
- Creates yum distribution database
- yum-complete-transaction(8)
-
- yum-cron(8)
- interface to convieniently call yum from cron
- yum-security(8)
-
- yum-shell(8)
- Yellowdog Updater Modified shell
- yum-updatesd(8)
- Update notifier daemon
- yumdb(8)
-
- zabbix_agentd(8)
- Zabbix agent daemon
- zabbix_proxy(8)
- Zabbix proxy daemon
- zabbix_selinux(8)
- Security Enhanced Policy for zabbix processes
- zabbix_server(8)
- Zabbix server daemon
- zarafa_deliver_selinux(8)
- Security Enhanced Policy for zarafa_deliver processes
- zarafa_gateway_selinux(8)
- Security Enhanced Policy for zarafa_gateway processes
- zarafa_ical_selinux(8)
- Security Enhanced Policy for zarafa_ical processes
- zarafa_indexer_selinux(8)
- Security Enhanced Policy for zarafa_indexer processes
- zarafa_monitor_selinux(8)
- Security Enhanced Policy for zarafa_monitor processes
- zarafa_selinux(8)
- Security Enhanced Policy for zarafa processes
- zarafa_server_selinux(8)
- Security Enhanced Policy for zarafa_server processes
- zarafa_spooler_selinux(8)
- Security Enhanced Policy for zarafa_spooler processes
- zcav(8)
- test raw hard drive throughput
- zdb(8)
- ZFS debugger
- zdump(8)
- timezone dumper
- zebra(8)
- routing manager for use with associated Quagga components
- zebra_selinux(8)
- Security Enhanced Policy for zebra processes
- zfs(8)
- configures ZFS file systems
- zfs-fuse(8)
- ZFS filesystem daemon
- zic(8)
- timezone compiler
- zone2sql(8)
- Convert ISC Bind zones to SQL
- zonec(8)
- NSD zone compiler
- zos_remote_selinux(8)
- Security Enhanced Policy for zos_remote processes
- zos_selinux(8)
- Security Enhanced Policy for zos processes
- zpool(8)
- configures ZFS storage pools
- zserv(8)
- CERNLIB server program for transferring ZEBRA formatted files
- zsplit(8)
- reads big devices/files/makes compressed splitted image chunks of it
- zstreamdump(8)
- filter data in zfs send stream