standard-mib(7) - Linux man page

STANDARD-MIB DEFINITIONS ::= BEGIN

IMPORTS
	Counter, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	DisplayString, mib-2
		FROM RFC1213-MIB
	;

-- Standard Datatypes

-- From SNMPv2 (rfc1903)
TruthValue ::=
-- Represents a boolean value

INTEGER { true(1), false(2) }

-- From SNMPv2 (rfc1903)
DateAndTime ::=
-- DESCRIPTION
-- "A date-time specification.
--
-- field octets contents range
-- 1 1-2 year 0..65536
-- 2 3 month 1..12
-- 3 4 day 1..31
-- 4 5 hour 0..23
-- 5 6 minutes 0..59
-- 6 7 seconds 0..60
-- (use 60 for leap-second)
-- 7 8 deci-seconds 0..9
-- 8 9 direction from UTC '+' / '-'
-- 9 10 hours from UTC 0..11
-- 10 11 minutes from UTC 0..59
--
-- For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
-- displayed as:
--
-- 1992-5-26,13:30:15.0,-4:0
--
-- Note that if only local time is known, then timezone
-- information (fields 8-10) is not present."

OCTET STRING (SIZE (8 | 11))

-- From SNMPv2 (rfc1903)
RowStatus ::=

		INTEGER {
			-- the following two values are states:
			-- these values may be read or written
			active(1),
			notInService(2),
			-- the following value is a state:
			-- this value may be read, but not written
			notReady(3),
			-- the following three values are
			-- actions: these values may be written,
			-- but are never read
			createAndGo(4),
			createAndWait(5),
			destroy(6)
			}

system OBJECT IDENTIFIER ::= { mib-2 1 }
snmp OBJECT IDENTIFIER ::= { mib-2 11 }

-- the System group

-- Implementation of the System group is mandatory for all
-- systems. If an agent is not configured to have a value
-- for any of these variables, a string of length 0 is
-- returned.

sysDescr OBJECT-TYPE

		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A textual description of the entity. This value
			should include the full name and version
			identification of the system's hardware type,
			software operating-system, and networking
			software. It is mandatory that this only contain
			printable ASCII characters."
		::= { system 1 }

sysObjectID OBJECT-TYPE

		SYNTAX OBJECT IDENTIFIER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The vendor's authoritative identification of the
			network management subsystem contained in the
			entity. This value is allocated within the SMI
			enterprises subtree (1.3.6.1.4.1) and provides an
			easy and unambiguous means for determining 'what
			kind of box' is being managed. For example, if
			vendor 'Flintstones, Inc.' was assigned the
			subtree 1.3.6.1.4.1.4242, it could assign the
			identifier 1.3.6.1.4.1.4242.1.1 to its 'Fred
			Router'."
		::= { system 2 }

sysUpTime OBJECT-TYPE

		SYNTAX TimeTicks
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The time (in hundredths of a second) since the
			network management portion of the system was last
			re-initialized."
		::= { system 3 }

sysContact OBJECT-TYPE

		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The textual identification of the contact person
			for this managed node, together with information
			on how to contact this person."
		::= { system 4 }

sysName OBJECT-TYPE

		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An administratively-assigned name for this
			managed node. By convention, this is the node's
			fully-qualified domain name."
		::= { system 5 }

sysLocation OBJECT-TYPE

		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The physical location of this node (e.g.,
			'telephone closet, 3rd floor')."
		::= { system 6 }

sysServices OBJECT-TYPE

SYNTAX INTEGER (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
	"A value which indicates the set of services that
	this entity primarily offers.
	The value is a sum. This sum initially takes the
	value zero, Then, for each layer, L, in the range
	1 through 7, that this node performs transactions
	for, 2 raised to (L - 1) is added to the sum. For
	example, a node which performs primarily routing
	functions would have a value of 4 (2^(3-1)). In
	contrast, a node which is a host offering
	application services would have a value of 72
	(2^(4-1) + 2^(7-1)). Note that in the context of
	the Internet suite of protocols, values should be
	calculated accordingly:
		layer functionality
		1 physical (e.g., repeaters)
		2 datalink/subnetwork (e.g., bridges)
		3 internet (e.g., IP gateways)
		4 end-to-end (e.g., IP hosts)
		7 applications (e.g., mail relays)
	For systems including OSI protocols, layers 5 and
	6 may also be counted."
::= { system 7 }
-- the SNMP group
-- Implementation of the SNMP group is mandatory for all
-- systems which support an SNMP protocol entity. Some of
-- the objects defined below will be zero-valued in those
-- SNMP implementations that are optimized to support only
-- those functions specific to either a management agent or
-- a management station. In particular, it should be
-- observed that the objects below refer to an SNMP entity,
-- and there may be several SNMP entities residing on a
-- managed node (e.g., if the node is hosting acting as
-- a management station).

snmpInPkts OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of Messages delivered to the
			SNMP entity from the transport service."
		::= { snmp 1 }

snmpOutPkts OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages which were
			passed from the SNMP protocol entity to the
			transport service."
		::= { snmp 2 }

snmpInBadVersions OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages which were
			delivered to the SNMP protocol entity and were for
			an unsupported SNMP version."
		::= { snmp 3 }

snmpInBadCommunityNames OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages delivered to
			the SNMP protocol entity which used a SNMP
			community name not known to said entity."
		::= { snmp 4 }

snmpInBadCommunityUses OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages delivered to
			the SNMP protocol entity which represented an SNMP
			operation which was not allowed by the SNMP
			community named in the Message."
		::= { snmp 5 }

snmpInASNParseErrs OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of ASN.1 or BER errors
			encountered by the SNMP protocol entity when
			decoding received SNMP Messages."
		::= { snmp 6 }
		-- { snmp 7 } is not used

snmpInTooBigs OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			'tooBig'."
		::= { snmp 8 }

snmpInNoSuchNames OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			'noSuchName'."
		::= { snmp 9 }

snmpInBadValues OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			'badValue'."
		::= { snmp 10 }

snmpInReadOnlys OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number valid SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			'readOnly'. It should be noted that it is a
			protocol error to generate an SNMP PDU which
			contains the value 'readOnly' in the error-status
			field, as such this object is provided as a means
			of detecting incorrect implementations of the
			SNMP."
		::= { snmp 11 }

snmpInGenErrs OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			'genErr'."
		::= { snmp 12 }

snmpInTotalReqVars OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of MIB objects which have been
			retrieved successfully by the SNMP protocol entity
			as the result of receiving valid SNMP Get-Request
			and Get-Next PDUs."
		::= { snmp 13 }

snmpInTotalSetVars OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of MIB objects which have been
			altered successfully by the SNMP protocol entity
			as the result of receiving valid SNMP Set-Request
			PDUs."
		::= { snmp 14 }

snmpInGetRequests OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Request PDUs which
			have been accepted and processed by the SNMP
			protocol entity."
		::= { snmp 15 }

snmpInGetNexts OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Next PDUs which have
			been accepted and processed by the SNMP protocol
			entity."
		::= { snmp 16 }

snmpInSetRequests OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Set-Request PDUs which
			have been accepted and processed by the SNMP
			protocol entity."
		::= { snmp 17 }

snmpInGetResponses OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Response PDUs which
			have been accepted and processed by the SNMP
			protocol entity."
		::= { snmp 18 }

snmpInTraps OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Trap PDUs which have
			been accepted and processed by the SNMP protocol
			entity."
		::= { snmp 19 }

snmpOutTooBigs OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status field is
			'tooBig.'"
		::= { snmp 20 }

snmpOutNoSuchNames OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status is
			'noSuchName'."
		::= { snmp 21 }

snmpOutBadValues OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status field is
			'badValue'."
		::= { snmp 22 }
		-- { snmp 23 } is not used

snmpOutGenErrs OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status field is
			'genErr'."
		::= { snmp 24 }

snmpOutGetRequests OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Request PDUs which
			have been generated by the SNMP protocol entity."
		::= { snmp 25 }

snmpOutGetNexts OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Next PDUs which have
			been generated by the SNMP protocol entity."
		::= { snmp 26 }

snmpOutSetRequests OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Set-Request PDUs which
			have been generated by the SNMP protocol entity."
		::= { snmp 27 }

snmpOutGetResponses OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Response PDUs which
			have been generated by the SNMP protocol entity."
		::= { snmp 28 }

snmpOutTraps OBJECT-TYPE

		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Trap PDUs which have
			been generated by the SNMP protocol entity."
		::= { snmp 29 }

snmpEnableAuthenTraps OBJECT-TYPE

		SYNTAX INTEGER { enabled(1), disabled(2) }
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Indicates whether the SNMP agent process is
			permitted to generate authentication-failure
			traps. The value of this object overrides any
			configuration information; as such, it provides a
			means whereby all authentication-failure traps may
			be disabled.
			Note that it is strongly recommended that this
			object be stored in non-volatile memory so that it
			remains constant between re-initializations of the
			network management system."
		::= { snmp 30 }

coldStart TRAP-TYPE

		ENTERPRISE snmp
		DESCRIPTION
			"A coldStart trap signifies that the sending
			protocol entity is reinitializing itself such
			that the agent's configuration or the rotocol
			entity implementation may be altered."
		::= 0

warmStart TRAP-TYPE

		ENTERPRISE snmp
		DESCRIPTION
			"A warmStart trap signifies that the sending
			protocol entity is reinitializing itself such
			that neither the agent configuration nor the
			protocol entity implementation is altered."
		::= 1

authenticationFailure TRAP-TYPE

		ENTERPRISE snmp
		DESCRIPTION
			"An authenticationFailure trap signifies that
			the sending protocol entity is the addressee
			of a protocol message that is not properly
			authenticated. While implementations of the
			SNMP must be capable of generating this trap,
			they must also be capable of suppressing the
			emission of such traps via an implementation-
			specific mechanism."
		::= 4

END