Linux man pages: U
- ua2nc(1)
- decodes Upper Air reports/stores reports in NetCDF format
- ualarm(3)
- schedule signal after given number of microseconds
- uatof(3)
- Converts string into double. Allegro game programming library
- uberkey(8)
- keylogger
- ucdtooff(1)
- filter to convert AVS 'ucd' format file into OFF file
- ucmatose(1)
- RDMA CM connection/simple ping-pong test
- uconv(1)
- convert data from one encoding to another
- uconvert(3)
- Hih level string encoding conversion wrapper. Allegro game programming library
- uconvert_ascii(3)
- Converts string from ASCII into current format. Allegro game programming library
- uconvert_size(3)
- Number of bytes needed to store string after conversion. Allegro game programming library
- uconvert_toascii(3)
- Converts strings from current format into ASCII. Allegro game programming library
- ucs2any(1)
- make BDF fonts containing subsets of ISO 10646-1 codepoints
- ucwidth(3)
- Low level helper function for testing Unicode text data. Allegro game programming library
- udaddy(1)
- RDMA CM datagram setup/simple ping-pong test
- uddi(3)
- UDDI client interface
- udev(7)
- dynamic device management
- udev(8)
- configurable dynamic device naming support
- udevadm(8)
- udev management tool
- udevcontrol(8)
- event managing daemon
- udevd(8)
- event managing daemon
- udevinfo(8)
- query device info from udev database
- udevmonitor(8)
- print kernel/udev event sequence to console
- udevsend(8)
- event managing daemon
- udevsettle(8)
- wait until queued kernel/udev events are handled
- udevstart(8)
- populate initial device directory
- udevtest(8)
- simulate udev run/print action to console
- udevtrigger(8)
- request kernel devices events for coldplug
- udns(3)
- stub DNS resolver library
- udp(7)
- User Datagram Protocol for IPv4
- udp-receiver(1)
- receive files broadcast by udp-sender
- udp-sender(1)
- broadcast file on LAN
- udpm(3)
- Perl extension for User Dialogs
- udunits(1)
- Unidata units utility
- udunits(3)
- Unidata units library
- udunitsperl(1)
- perl extension for UDUNITS
- uevent(n)
- User events
- ufraw(1)
- Convert camera RAW images to standard image files
- ugetat(3)
- Finds out value of char in string. Allegro game programming library
- ugetc(3)
- Low level helper function for reading Unicode text data. Allegro game programming library
- ugetrlimit(2)
- get/set resource limits
- ugetx(3)
- Low level helper function for reading Unicode text data. Allegro game programming library
- ugetxc(3)
- Low level helper function for reading Unicode text data. Allegro game programming library
- ui(3)
- New User Interface
- ui_add_error_string(3)
- New User Interface
- ui_add_info_string(3)
- New User Interface
- ui_add_input_boolean(3)
- New User Interface
- ui_add_input_string(3)
- New User Interface
- ui_add_user_data(3)
- New User Interface
- ui_add_verify_string(3)
- New User Interface
- ui_compat(3)
- Compatibility user interface functions
- ui_construct_prompt(3)
- New User Interface
- ui_ctrl(3)
- New User Interface
- ui_dup_error_string(3)
- New User Interface
- ui_dup_info_string(3)
- New User Interface
- ui_dup_input_boolean(3)
- New User Interface
- ui_dup_input_string(3)
- New User Interface
- ui_dup_verify_string(3)
- New User Interface
- ui_free(3)
- New User Interface
- ui_get0_result(3)
- New User Interface
- ui_get0_user_data(3)
- New User Interface
- ui_get_default_method(3)
- New User Interface
- ui_get_method(3)
- New User Interface
- ui_new(3)
- New User Interface
- ui_new_method(3)
- New User Interface
- ui_openssl(3)
- New User Interface
- ui_process(3)
- New User Interface
- ui_set_default_method(3)
- New User Interface
- ui_set_method(3)
- New User Interface
- uic(1)
- Qt user interface compiler
- uid(3)
-
- uil(1)
-
- uil(3)
-
- uil(5)
-
- uildumpsymboltable(3)
-
- uilib(3)
- User interface library intro
- uim-xim(1)
- XIM interface to UIM
- uinsert(3)
- Inserts char in string. Allegro game programming library
- uint16_c(3)
-
- uint16_max(3)
-
- uint16_t(3)
-
- uint32_c(3)
-
- uint32_max(3)
-
- uint32_t(3)
-
- uint64_c(3)
-
- uint64_max(3)
-
- uint64_t(3)
-
- uint8_c(3)
-
- uint8_max(3)
-
- uint8_t(3)
-
- uint_farptr_t(3)
-
- uint_fast16_max(3)
-
- uint_fast16_t(3)
-
- uint_fast32_max(3)
-
- uint_fast32_t(3)
-
- uint_fast64_max(3)
-
- uint_fast64_t(3)
-
- uint_fast8_max(3)
-
- uint_fast8_t(3)
-
- uint_least16_max(3)
-
- uint_least16_t(3)
-
- uint_least32_max(3)
-
- uint_least32_t(3)
-
- uint_least64_max(3)
-
- uint_least64_t(3)
-
- uint_least8_max(3)
-
- uint_least8_t(3)
-
- uintmax_c(3)
-
- uintmax_max(3)
-
- uintmax_t(3)
-
- uintptr_max(3)
-
- uintptr_t(3)
-
- uisdigit(3)
- Tells if char is digit. Allegro game programming library
- uisok(3)
- Low level helper function for testing Unicode text data. Allegro game programming library
- uisp(1)
- manual page for uisp
- uisspace(3)
- Tells if char is whitespace. Allegro game programming library
- ujconv(1)
- reinvented iconv using Unicode::Japanese
- ujguess(1)
- Guess encoding of given files
- ul(1)
-
- ulckpwdf(3)
- encrypted password file routines
- ulimit(1)
- set/get shells resource usage limits
- ulimit(3)
- get/set user limits
- ulogd(8)
- netfilter/iptables ULOG daemon
- ultoa(3)
-
- umad_addr_dump(3)
- dump addr structure to stderr
- umad_alloc(3)
- allocate memory for umad buffers
- umad_close_port(3)
- close InfiniBand device port for umad access
- umad_debug(3)
- set debug level
- umad_done(3)
- perform library initialization/finalization
- umad_dump(3)
- dump umad buffer to stderr
- umad_free(3)
- frees memory of umad buffers
- umad_get_ca(3)
- get/release InfiniBand device port attribs
- umad_get_ca_portguids(3)
- InfiniBand device ports GUIDs
- umad_get_cas_names(3)
- list of available InfiniBand device names
- umad_get_fd(3)
- umad fd for requested port
- umad_get_mad(3)
- MAD pointer of umad buffer
- umad_get_mad_addr(3)
- address of ib_mad_addr from umad buffer
- umad_get_port(3)
- open/close InfiniBand port
- umad_init(3)
- perform library initialization/finalization
- umad_open_port(3)
- open InfiniBand device port for umad access
- umad_poll(3)
- poll umad
- umad_recv(3)
- receive umad
- umad_register(3)
- register specified management class/version for port
- umad_register_oui(3)
- register specified class in vendor range 2 for port
- umad_release_ca(3)
- get/release InfiniBand device port attribs
- umad_release_port(3)
- open/close InfiniBand port
- umad_send(3)
- send umad
- umad_set_addr(3)
- set MAD address fields within umad buffer using host ordering
- umad_set_addr_net(3)
- set MAD address fields within umad buffer using network ordering
- umad_set_grh(3)
- set GRH fields within umad buffer using host ordering
- umad_set_grh_net(3)
- set GRH fields within umad buffer using network ordering
- umad_size(3)
- size of umad buffer
- umad_status(3)
- status of umad buffer
- umad_unregister(3)
- unregister umad agent
- umap(1)
- map between different char sets
- umask(1)
- set/get file-creation mask
- umask(2)
- set file mode creation mask
- umask(3)
- set/get file mode creation mask
- umb-scheme(1)
- UMB Scheme
- umlclass.pl(1)
- Utility to make UML class diagrams from Perl source/runtime
- umlspeed(1)
- Compile UML code to SVG diagrams, XMI and source
- ummf(1)
- driver for UMMF
- ummf(3)
- UML Meta-Model Framework. UML to code generation via XMI. Implements UML 1.5 meta-model. Provides object-oriented Perl interface for processing UML meta-models ...
- ummf.pl(1)
- driver for UMMF
- umount(2)
- mount/unmount filesystems
- umount(8)
- unmount file systems
- umount.cifs(8)
- for normal, non-root users, to unmount their own Common Internet File System mounts
- umount.crypt(8)
- unmount dm-crypt encrypted volume
- umount.davfs(8)
- Umount-helper to unmount davfs2 file system
- umount.nfs(8)
- unmount Network File System
- umount2(2)
- mount/unmount filesystems
- unalias(1)
- bash built-in commands, see bash
- uname(1)
- print system info
- uname(2)
- name/info about current kernel
- uname(3)
- name of current system
- unarj(1)
- Unarchive ARJ files
- unattr(8)
- remove choosen xattr from files, recursively
- unbin(1)
- Macintosh file format transformer
- unbuffer(1)
- unbuffer output
- uncompface(1)
- compress/expand 48x48x1 face image files
- uncompface(3)
- compress/expand 48x48x1 face image files
- uncompress(1)
- compress/expand data
- unctrl(3)
- miscellaneous curses utility routines
- undocumented(2)
- undocumented system calls
- undocumented(3)
- undocumented library functions
- unent(1)
- replace HTML predefined char entities to UTF-8
- unexpand(1)
- convert spaces to tabs
- unexpunge(8)
- restore expunged messages
- unflatablexpr(3)
-
- unflatten(1)
- adjust directed graphs to improve layout aspect ratio
- unflattenlofig(3)
-
- unfreeze(1)
- compress/uncompress files
- unfsd(8)
- NFS server process
- unget(1)
- undo previous get of SCCS file
- unget_wch(3)
- wide char from curses terminal keyboard
- ungetc(3)
- input of char/strings
- ungetch(3)
- char from curses terminal keyboard
- ungetmouse(3)
- mouse interface through curses
- ungetwc(3)
- push back wide char onto FILE stream
- unhex(1)
- Macintosh file format transformer
- uni2ascii(1)
- convert UTF-8 Unicode to various 7-bit ASCII representations
- unicharisalpha(3)
- routines for classification of Tcl_UniChar char
- unicode(7)
- Universal char Set
- unicode_start(1)
- put keyboard/console in unicode mode
- unicode_stop(1)
- revert keyboard/console from unicode mode
- uniconv(1)
- convert Netatalk volume encoding
- unifdef(1)
-
- unilog(3)
- Perl module for unified logging on Unix/Win32
- unimplemented(2)
- unimplemented system calls
- uniq(1)
- report/omit repeated lines
- uniq(3)
-
- uniq.plug(1)
- plugin for rpmrebuild, to remove duplicate spec lines
- unitdiff(1)
- Describe diff in interface of FPC unit
- units(1)
- unit conversion program
- units(7)
- decimal/binary prefixes
- units(n)
- unit conversion
- universal(3)
- base class for ALL classes
- unix(3)
- Interface to Unix system
- unix(7)
- Sockets for local interprocess communication
- unix.largefile(3)
- File operations on large files
- unix2dos(1)
- UNIX to DOS text file format converter
- unix_chkpwd(8)
- helper binary that verifies password of current user
- unix_telnet(3)
-
- unknown(n)
- Handle attempts to use non-existent commands
- unlink(1)
- call unlink function to remove specified file
- unlink(2)
- delete name/possibly file it refers to
- unlink(3)
- remove directory entry
- unlinkat(2)
- remove directory entry relative to directory file descriptor
- unlisten(7)
- stop listening for notification
- unload_datafile(3)
- Frees all objects in datafile. Allegro game programming library
- unload_datafile_object(3)
- Frees object previously loaded by load_datafile_object(). Allegro game programming library
- unlocked_stdio(3)
- non-locking stdio functions
- unlockpt(3)
- unlock pseudo-terminal master/slave pair
- unlzma(1)
- LZMA compression/decompression tool
- unmarkbddnode(3)
-
- unnamedobj(3)
-
- unoconv(1)
- convert any document from/to any OpenOffice supported format
- unpack200-java-1.7.0-icedtea(1)
- JAR Unpacking tool
- unpipe(1)
- convert output of pipe back to XML format
- unpost_form(3)
- write/erase forms from associated subwindows
- unpost_menu(3)
- write/erase menus from associated subwindows
- unprotoize(1)
- automatically add/remove function prototypes
- unrar(1)
- extract files from rar archives
- unregister_app_config_handler(3)
- read_config functions
- unregister_config_handler(3)
- read_config functions
- unrtf(1)
- converts document in RTF format to other formats
- unscare_mouse(3)
- Undoes effect of scare_mouse()/scare_mouse_area(). Allegro game programming library
- unselect_palette(3)
- Restores palette before last call to select_palette(). Allegro game programming library
- unset(1)
- bash built-in commands, see bash
- unset(n)
- Delete variables
- unsetbddrefext(3)
-
- unsetenv(3)
- change/add environment variable
- unsf(1)
- break up SoundFont .sf2 files into GUS-type instrument patches
- unshar(1)
- unpack shar file
- unshare(2)
- disassociate parts of process execution context
- unsign(1)
-
- unsingle(1)
- Macintosh file format transformer
- unstr(1)
- dump strings in pointer order
- untaint(3)
- Module for laundering tainted data
- untouchwin(3)
- curses refresh control routines
- unw_create_addr_space(3)
- create address space for remote unwinding
- unw_destroy_addr_space(3)
- destroy unwind address space
- unw_flush_cache(3)
- flush cached info
- unw_get_accessors(3)
- pointer to accessor call-backs
- unw_get_fpreg(3)
- contents of floating-point register
- unw_get_proc_info(3)
- info on current procedure
- unw_get_proc_info_by_ip(3)
- procedure info by IP
- unw_get_proc_name(3)
- name of current procedure
- unw_get_reg(3)
- register contents
- unw_getcontext(3)
- initial machine-state
- unw_init_local(3)
- initialize cursor for local unwinding
- unw_init_remote(3)
- initialize cursor for remote unwinding
- unw_is_fpreg(3)
- check if register is floating-point register
- unw_is_signal_frame(3)
- check if current frame is signal frame
- unw_regname(3)
- register name
- unw_resume(3)
- resume execution in particular stack frame
- unw_set_caching_policy(3)
- set unwind caching policy
- unw_set_fpreg(3)
- set contents of floating-point register
- unw_set_reg(3)
- set register contents
- unw_step(3)
- advance to next stack frame
- unw_strerror(3)
- text corresponding to error code
- unwrapdiff(1)
- demangle word-wrapped patches
- unzip(1)
- list, test and extract compressed files in ZIP archive
- unzipsfx(1)
- self-extracting stub for prepending to ZIP archives
- unzsplit(8)
- will read splitted files produced by zsplit, glue and decompress them to its origin
- uoffset(3)
- Finds offset of char in string. Allegro game programming library
- up2date(8)
- program for updating packages on Red Hat Enterprise
- update(7)
- update rows of table
- update(n)
- Process pending events/idle callbacks
- update-alternatives(8)
- maintain symbolic links determining default commands
- update-mime-database(1)
- build Shared MIME-Info
- update-pciids(8)
- download new version of PCI ID list
- update-reader.conf(8)
- make /etc/reader.conf
- update_dialog(3)
- Low level function to update dialog player. Allegro game programming library
- update_menu(3)
- Low level function to update menu player. Allegro game programming library
- update_panels(3)
- panel stack extension for curses
- updatedb(1)
- update slocate database
- updatedb(8)
- update database for mlocate
- updatedb.conf(5)
- config file for updatedb
- updatenews(8)
- post articles from outgoing spool directory/prefetch newsgroups
- updmap(1)
- Update font map files for TeX output drivers
- updmap-sys(1)
- Update font map files for TeX output drivers
- updwtmp(3)
- append entry to wtmp file
- uplevel(n)
- Execute script in different stack frame
- upnpd(8)
- UPnP Internet Gateway Device daemon
- ups.conf(5)
- UPS definitions for Network UPS Tools
- upsc(8)
- example lightweight UPS client
- upscli_connect(3)
- Open connection to NUT upsd
- upscli_disconnect(3)
- disconnect from UPS server
- upscli_fd(3)
- file descriptor for connection
- upscli_get(3)
- data from UPS
- upscli_list_next(3)
- list items from UPS
- upscli_list_start(3)
- begin multi-item retrieval from UPS
- upscli_readline(3)
- read single response from UPS
- upscli_sendline(3)
- send single command to UPS
- upscli_splitaddr(3)
- split listening address into its components
- upscli_splitname(3)
- split UPS definition into its components
- upscli_ssl(3)
- Check SSL mode for current connection
- upscli_strerror(3)
- return string describing error condition
- upscli_upserror(3)
- current error number for connection
- upsclient(3)
- Network UPS Tools client access library
- upscmd(8)
- UPS administration program for instant commands
- upscode2(8)
- Driver for UPScode II compatible UPS equipment
- upsd(8)
- UPS info server
- upsd.conf(5)
- config for Network UPS Tools upsd
- upsd.users(5)
- Administrative user definitions for NUT upsd
- upsdrvctl(8)
- UPS driver controller
- upsimage.cgi(8)
- Image-generating helper for upsstats.cgi
- upslog(8)
- UPS status logger
- upslug2(8)
- utility to upgrade firmware of NSLU2
- upsmon(8)
- UPS monitor/shutdown controller
- upsmon.conf(5)
- config for Network UPS Tools upsmon
- upsrw(8)
- UPS variable administration tool
- upssched(8)
- Timer helper for scheduling events from upsmon
- upssched.conf(5)
- config for upssched timer program
- upsset.cgi(8)
- Web-based UPS administration program
- upsset.conf(5)
- config for Network UPS Tools upsset.cgi
- upsstats.cgi(8)
- Web-based UPS status viewer
- upsstats.html(5)
- HTML template for Network UPS Tools upsstats
- upstr(3)
-
- uptime(1)
- Tell how long system has been running
- upvar(3)
- link one variable to another
- upvar(n)
- Create link to variable in different stack frame
- upx(1)
- compress/expand executable files
- ur98(4)
- UR98 head tracker driver
- urandom(4)
- kernel random number source devices
- uread(1)
- reads Fortran unformatted file
- ureadkey(3)
- Returns next unicode char from keyboard buffer. Allegro game programming library
- uremove(3)
- Removes char from string. Allegro game programming library
- uri(3)
- Uniform Resource Identifiers
- uri(7)
- uniform resource identifier , including URL or URN
- uri(n)
- URI utilities
- uriexec(1)
- Decode/execute given URI-encoded command
- url(7)
- uniform resource identifier , including URL or URN
- url.list(5)
- websec url monitoring config
- urls_txt(5)
-
- urlsnarf(8)
- sniff HTTP requests in Common Log Format
- urlview(1)
- URL extractor/launcher
- urn(7)
- uniform resource identifier , including URL or URN
- urxvt(1)
-
- urxvt(7)
- FAQ, command sequences and other background info
- urxvtc(1)
- control urxvtd daemon
- urxvtd(1)
- urxvt terminal daemon
- urxvtperl(3)
- rxvt-unicode's embedded perl interpreter
- usbhid-ups(8)
- Driver for USB/HID UPS equipment
- usbmodules(8)
- kernel driver modules available for plugged in USB device
- use-devel-assertos(1)
- package Devel::AssertOS modules with your code
- use_default_colors(3)
- use terminal's default colors
- use_env(3)
- miscellaneous curses utility routines
- use_extended_names(3)
- miscellaneous curses extensions
- use_legacy_coding(3)
- use terminal's default colors
- uselib(2)
- load shared library
- user(3)
-
- useradd(8)
- create new user/update default new user info
- userdb(8)
- change /etc/userdb
- userdbpw(8)
- create encrypted password
- userdel(8)
- delete user account/related files
- userhelper(8)
- helper interface to pam
- userinfo(1)
- graphical equivilient to chfn
- userisdnctl(8)
- Control/setup ISDN parameters
- usermod(8)
- modify user account
- usermount(1)
- mount, unmount and format filesystems
- usernetctl(8)
- allow user to change network interface if permitted
- userpasswd(1)
- allow users to change their passwords
- users(1)
- print user names of users currently logged in to current host
- users(5)
- user authorization file for FreeRADIUS server
- usetat(3)
- Replaces char in string. Allegro game programming library
- usetc(3)
- Low level helper function for writing Unicode text data. Allegro game programming library
- ushare(1)
- lightweight UPnP /V/DLNA Media Server
- using_avrprog(3)
- Using avrdude program
- using_tools(3)
- Using GNU tools This is short summary of AVR-specific aspects of using GNU tools. Normally, generic documentation of these tools is fairly large and maintained ...
- usleep(1)
- sleep some number of microseconds
- usleep(3)
- suspend execution for microsecond intervals
- usprintf(3)
- Writes formatted data into buffer. Allegro game programming library
- ustat(2)
- file system statistics
- ustr(3)
- ustr string library functions
- ustr-import(1)
- ustr string library import tool
- ustr_const(3)
- ustr string library constants
- ustrcat(3)
- Concatenates string to another one. Allegro game programming library
- ustrchr(3)
- Finds first occurrence of char in string. Allegro game programming library
- ustrcmp(3)
- Compares two strings. Allegro game programming library
- ustrcpy(3)
- Copies string into another one. Allegro game programming library
- ustrdup(3)
- Duplicates string. Allegro game programming library
- ustrerror(3)
- Returns string describing errno. Allegro game programming library
- ustricmp(3)
- Compares two strings ignoring case. Allegro game programming library
- ustrip(1)
- strips record length info from Fortran unformatted file
- ustrlen(3)
- Tells number of char in string. Allegro game programming library
- ustrlwr(3)
- Replaces all letters with lower case. Allegro game programming library
- ustrncat(3)
- Concatenates string to another one, specifying size. Allegro game programming library
- ustrncmp(3)
- Compares up to n letters of two strings. Allegro game programming library
- ustrncpy(3)
- Copies string into another one, specifying size. Allegro game programming library
- ustrnicmp(3)
- Compares up to n letters of two strings ignoring case. Allegro game programming library
- ustrpbrk(3)
- Finds first char that matches any in set. Allegro game programming library
- ustrrchr(3)
- Finds last occurence of char in string. Allegro game programming library
- ustrsize(3)
- Size of string in bytes without null terminator. Allegro game programming library
- ustrsizez(3)
- Size of string in bytes including null terminator. Allegro game programming library
- ustrstr(3)
- Finds first occurence of string in another one. Allegro game programming library
- ustrtod(3)
- Converts string into floating point number. Allegro game programming library
- ustrtok(3)
- Retrieves tokens from string. Allegro game programming library
- ustrtok_r(3)
- Reentrant function to retrieve tokens from string. Allegro game programming library
- ustrtol(3)
- Converts string into integer. Allegro game programming library
- ustrupr(3)
- Replaces all letters with upper case. Allegro game programming library
- ustrzcat(3)
- Concatenates string to another one, specifying size. Allegro game programming library
- ustrzcpy(3)
- Copies string into another one, specifying size. Allegro game programming library
- ustrzncat(3)
- Concatenates string to another one, specifying size. Allegro game programming library
- ustrzncpy(3)
- Copies string into another one, specifying size. Allegro game programming library
- usual(n)
- access default option-handling commands for mega-widget component
- uswap(1)
- converts endianness of Fortran unformatted file
- uszprintf(3)
- Writes formatted data into buffer, specifying size. Allegro game programming library
- utf(3)
- routines for manipulating UTF-8 strings
- utf-8(7)
- ASCII compatible multi-byte Unicode encoding
- utf8(3)
- Perl pragma to enable/disable UTF-8 in source code
- utf8(7)
- ASCII compatible multi-byte Unicode encoding
- utf8bom(1)
- handling Byte Order Mark for UTF-8 files
- utf8bom(3)
- handling Byte Order Mark for UTF-8 files
- utf8tolatin1(1)
-
- utf8trans(1)
- Transliterate UTF-8 char according to table
- util_crc(3)
-
- util_delay(3)
-
- util_delay_basic(3)
-
- util_parity(3)
-
- util_twi(3)
-
- utime(2)
- change access/modification times of inode
- utime(3)
- set file access/modification times
- utimes(2)
- change access/modification times of inode
- utimes(3)
- set file access/modification times
- utmp(5)
- login records
- utmpname(3)
- access utmp file entries
- utoa(3)
-
- utolower(3)
- Converts letter to lower case. Allegro game programming library
- utoupper(3)
- Converts letter to upper case. Allegro game programming library
- utrac(1)
- recognize/convert charset/end-of-line of text files
- uucico(8)
- UUCP file transfer daemon
- uucp(1)
- Unix to Unix copy
- uudecode(1)
- encode binary file, or decode its representation
- uudeview(1)
- powerful decoder for binary files
- uuencode(1)
- encode binary file, or decode its representation
- uuencode(5)
- format of encoded uuencode file
- uuencode(n)
- UU-encode/decode binary data
- uuenview(1)
- powerful encoder for binary files
- uuid(1)
- Universally Unique Identifier Tool
- uuid(3)
- DCE compatible Universally Unique Identifier library
- uuid(n)
- UUID generation/comparison
- uuid-config(1)
- OSSP uuid API build utility
- uuid_clear(3)
- reset value of UUID variable to NULL value
- uuid_compare(3)
- compare whether two UUIDs are same
- uuid_copy(3)
- copy UUID value
- uuid_generate(3)
- create new unique UUID value
- uuid_generate_random(3)
- create new unique UUID value
- uuid_generate_time(3)
- create new unique UUID value
- uuid_is_null(3)
- compare value of UUID to NULL value
- uuid_parse(3)
- convert input UUID string into binary representation
- uuid_time(3)
- extract time at which UUID was created
- uuid_unparse(3)
- convert UUID from binary representation to string
- uuidd(8)
- UUID generation daemon
- uuidgen(1)
- utility to create new UUID value
- uuname(1)
- names of known remote UUCP sites
- uustat(1)
- UUCP status inquiry/control
- uux(1)
- Remote command execution over UUCP
- uuxqt(8)
- UUCP execution daemon
- uvsprintf(3)
- Writes formatted data into buffer, using variable arguments. Allegro game programming library
- uvszprintf(3)
- Writes formatted data into buffer, using size and variable arguments. Allegro game programming library
- uwidth(3)
- Low level helper function for testing Unicode text data. Allegro game programming library
- uwidth_max(3)
- Number of bytes char can occupy. Allegro game programming library
- uwildmat(3)
- Perform wildmat matching
- uxterm(1)
- X terminal emulator for Unicode environments