Linux man pages: L
- l2ping(1)
- Send L2CAP echo request/receive answer
- l2tp-secrets(5)
- L2TPD secrets file
- l2tpns(8)
- Layer 2 tunneling protocol network server
- l64a(3)
- convert between long/base-64
- label(3)
-
- label(n)
- Create/change label widgets
- labelframe(n)
- Create/change labelframe widgets
- labplot(1)
- data plotting/function analysis tool for KDE
- labrea(1)
- Honeypot for incoming IP connection attempts
- labrea.conf(5)
- labrea config file
- labs(3)
- compute absolute value of integer
- lam(7)
- LAM/MPI implementation
- lam-helpfile(5)
- LAM help message file
- lam_kpause(2)
- change LAM signal handling policy
- lam_ksigblock(2)
- change LAM signal handling policy
- lam_ksignal(2)
- Specify signal handler for LAM signal
- lam_ksigretry(2)
- change LAM signal handling policy
- lam_ksigsetmask(2)
- change LAM signal handling policy
- lam_ksigsetretry(2)
- change LAM signal handling policy
- lam_rfclose(2)
- LAM POSIX-like remote file service
- lam_rfincr(2)
- Control LAM specific file daemon services
- lam_rflseek(2)
- LAM POSIX-like remote file service
- lam_rfopen(2)
- LAM POSIX-like remote file service
- lam_rfposix(2)
- LAM POSIX-like remote file service
- lam_rfread(2)
- LAM POSIX-like remote file service
- lam_rfrmfd(2)
- Control LAM specific file daemon services
- lam_rfstat(2)
- LAM POSIX-like remote file service
- lam_rfstate(2)
- Report status of remote LAM file descriptors
- lam_rfwrite(2)
- LAM POSIX-like remote file service
- lam_rtrfforget(2)
- Unload LAM trace data
- lam_rtrfget(2)
- Unload LAM trace data
- lam_rtrforget(2)
- Unload LAM trace data
- lam_rtrget(2)
- Unload LAM trace data
- lam_rtrstore(2)
- Store LAM trace data
- lam_rtrsweep(2)
- Remove LAM trace data
- lam_rtrudie(2)
- Remove LAM trace data
- lam_rtrwipe(2)
- Remove LAM trace data
- lambda(1)
- extended unicode TeX
- lamboot(1)
- Start LAM multicomputer
- lamc++(1)
- Compile LAM/MPI C/C++ programs
- lamcc(1)
- Compile LAM/MPI C/C++ programs
- lamcheckpoint(1)
- Checkpoint LAM/MPI job
- lamclean(1)
- Attempt to clean entire LAM system
- lamd(1)
- introduction to Local Area Multicomputer
- lame(1)
- create mp3 audio files
- lament(1)
- animates Lament config
- lament(6)
- animates Lament config
- lamexec(1)
- Run MPI programs on LAM nodes
- lamf77(1)
- Compile LAM FORTRAN programs
- lamf_rfclose(2)
- Open/close remote file
- lamf_rfopen(2)
- Open/close remote file
- lamf_rfread(2)
- Read/write data from/to remote file
- lamf_rfwrite(2)
- Read/write data from/to remote file
- lamgrow(1)
- Extend LAM multicomputer
- lamhalt(1)
- Shutdown LAM/MPI run-time environment
- laminfo(1)
- config info about LAM/MPI
- lammsg(1)
- Monitor MPI message buffers under LAM
- lamnodes(1)
- Resolve LAM node/CPU notation to Unix hostnames
- lamrestart(1)
- restart LAM/MPI program
- lamrun(1)
- Run MPI programs on LAM nodes
- lamshrink(1)
- Shrink LAM universe
- lamssi(7)
- introduction to LAM System Services Interface
- lamssi_boot(7)
- overview of LAM's boot SSI modules
- lamssi_coll(7)
- overview of LAM's MPI collective SSI modules
- lamssi_cr(7)
- overview of LAM's MPI checkpoint/restart SSI modules
- lamssi_rpi(7)
- overview of LAM's RPI SSI modules
- lamtask(1)
- Monitor MPI processes under LAM
- lamtrace(1)
- Unload LAM trace data
- lamwipe(1)
- Shutdown LAM
- langident(1)
- identifies language files are written in
- language-guess(1)
-
- lapack(l)
-
- lappend(n)
- Append list elements onto variable
- lapply(1)
- modify file system to match apply-able-transcript
- laptop-mode.conf(8)
- config file for laptop-mode-tools/laptop_mode control script
- laptop_mode(8)
- start/stop laptop mode
- largedemo(3)
- This project extends basic idea of simple project to control LED with PWM output, but adds methods to adjust LED brightness. It employs lot of basic concepts ...
- largeprimes(1)
- make large, random primes using Crypt::Primes
- laser(1)
- draws vaguely laser-like moving lines
- laser(6)
- draws vaguely laser-like moving lines
- last(1)
- of last logged in users
- lastb(1)
- of last logged in users
- lastcomm(1)
- print out info about previously executed commands
- lastknownrequestprocessed(3)
- macros/functions
- lastlog(8)
- reports most recent login of all users/of given user
- lat(1)
- LDAP Administration Tool
- latex(1)
- structured text formatting/typesetting
- latex2html(1)
- translate LaTeX files to HTML
- latexmk(1)
- make LaTeX document
- latin1(7)
- ISO 8859-1 char set encoded in octal, decimal, and hexadecimal
- latin10(7)
- ISO 8859-16 char set encoded in octal, decimal, and hexadecimal
- latin2(7)
- ISO 8859-2 char set encoded in octal, decimal, and hexadecimal
- latin5(7)
- ISO 8859-9 char set encoded in octal, decimal, and hexadecimal
- latin9(7)
- ISO 8859-15 char set encoded in octal, decimal, and hexadecimal
- lav2mpeg(1)
- easy conversion of lav files to mpeg
- lav2wav(1)
- Extract audio out of MJPEG container files to stdout
- lav2yuv(1)
- Convert MJPEG file to raw yuv
- lavalite(1)
- 3D OpenGL simulation of Lavalite
- lavalite(6)
- 3D OpenGL simulation of Lavalite
- lavpipe(1)
- creates raw YUV streams from pipe list scripts
- lavplay(1)
- Playback/edit MJPEG video
- lavrec(1)
- Record MJPEG-video from zoran/video4linux-device
- lavtrans(1)
- Convert MJPEG videos to other MJPEG video formats
- lax(5)
-
- layingsiege(7)
-
- lazy(3)
- Deferred computations
- lbdb-fetchaddr(1)
- grab addresses from mails add append them to lbdb database
- lbdb_dotlock(1)
- Lock mail spool files
- lbdbq(1)
- query program for little brother's database
- lber-decode(3)
- LBER simplified Basic Encoding Rules library routines for decoding
- lber-encode(3)
- LBER simplified Basic Encoding Rules library routines for encoding
- lber-memory(3)
- LBER memory allocators
- lber-types(3)
- LBER types/allocation functions
- lbxproxy(1)
- Low BandWidth X proxy
- lc(1)
- Low Latency stdio <-> Layer 2 Filtering Bridge
- lcap(8)
- remove kernel capabilities
- lcdd(8)
- LCDproc server daemon
- lcdexec(1)
- LCDproc client to execute commands from LCDd menu
- lcdproc(1)
- system status info client
- lcdproc-config(5)
- format of LCDproc's config files
- lchage(1)
- Display/change user password policy
- lchfn(1)
- Change finger info
- lchown(2)
- change ownership of file
- lchown(3)
- change owner/group of symbolic link
- lchown32(2)
- change ownership of file
- lchsh(1)
- Change login shell
- lckdo(1)
- run program with lock held
- lckpwdf(3)
- encrypted password file routines
- lcksum(1)
- verifies transcript's checksums/file sizes
- lcong48(3)
- make uniformly distributed pseudo-random numbers
- lcong48_r(3)
- make uniformly distributed pseudo-random numbers reentrantly
- lcov(1)
- GCOV coverage tool extension
- lcovrc(5)
- lcov config file
- lcreate(1)
- upload transcripts/their corresponding files
- ld(1)
- GNU linker
- ld-linux(8)
- dynamic linker/loader
- ld-linux.so(8)
- dynamic linker/loader
- ld.so(8)
- dynamic linker/loader
- ld86(1)
- Linker for as86
- ld_errno(3)
- LDAP protocol error handling routines
- ldap(3)
- OpenLDAP Lightweight Directory Access Protocol API
- ldap(n)
- LDAP client
- ldap.conf(5)
- ldap config file
- ldap_abandon(3)
- Abandon LDAP operation in progress
- ldap_abandon_ext(3)
- Abandon LDAP operation in progress
- ldap_add(3)
- Perform LDAP add operation
- ldap_add_ext(3)
- Perform LDAP add operation
- ldap_add_ext_s(3)
- Perform LDAP add operation
- ldap_add_s(3)
- Perform LDAP add operation
- ldap_attributetype2name(3)
- Schema definition handling routines
- ldap_attributetype2str(3)
- Schema definition handling routines
- ldap_attributetype_free(3)
- Schema definition handling routines
- ldap_bind(3)
- LDAP bind routines
- ldap_bind_s(3)
- LDAP bind routines
- ldap_compare(3)
- Perform LDAP compare operation
- ldap_compare_ext(3)
- Perform LDAP compare operation
- ldap_compare_ext_s(3)
- Perform LDAP compare operation
- ldap_compare_s(3)
- Perform LDAP compare operation
- ldap_count_entries(3)
- LDAP result entry parsing/counting routines
- ldap_count_messages(3)
- Stepping through messages in result chain
- ldap_count_references(3)
- Stepping through continuation references in result chain
- ldap_count_values(3)
- LDAP attrib value handling routines
- ldap_count_values_len(3)
- LDAP attrib value handling routines
- ldap_dcedn2dn(3)
- LDAP DN handling routines
- ldap_delete(3)
- Perform LDAP delete operation
- ldap_delete_ext(3)
- Perform LDAP delete operation
- ldap_delete_ext_s(3)
- Perform LDAP delete operation
- ldap_delete_s(3)
- Perform LDAP delete operation
- ldap_dn2ad_canonical(3)
- LDAP DN handling routines
- ldap_dn2dcedn(3)
- LDAP DN handling routines
- ldap_dn2str(3)
- LDAP DN handling routines
- ldap_dn2ufn(3)
- LDAP DN handling routines
- ldap_err2string(3)
- LDAP protocol error handling routines
- ldap_errlist(3)
- LDAP protocol error handling routines
- ldap_error(3)
- LDAP protocol error handling routines
- ldap_explode_dn(3)
- LDAP DN handling routines
- ldap_explode_rdn(3)
- LDAP DN handling routines
- ldap_first_attribute(3)
- step through LDAP entry attribs
- ldap_first_entry(3)
- LDAP result entry parsing/counting routines
- ldap_first_message(3)
- Stepping through messages in result chain
- ldap_first_reference(3)
- Stepping through continuation references in result chain
- ldap_free_urldesc(3)
- LDAP Uniform Resource Locator routines
- ldap_get_dn(3)
- LDAP DN handling routines
- ldap_get_values(3)
- LDAP attrib value handling routines
- ldap_get_values_len(3)
- LDAP attrib value handling routines
- ldap_init(3)
- Initialize LDAP library/open connection to LDAP server
- ldap_is_ldap_url(3)
- LDAP Uniform Resource Locator routines
- ldap_kerberos_bind1(3)
- LDAP bind routines
- ldap_kerberos_bind1_s(3)
- LDAP bind routines
- ldap_kerberos_bind2(3)
- LDAP bind routines
- ldap_kerberos_bind2_s(3)
- LDAP bind routines
- ldap_kerberos_bind_s(3)
- LDAP bind routines
- ldap_matchingrule2name(3)
- Schema definition handling routines
- ldap_matchingrule2str(3)
- Schema definition handling routines
- ldap_matchingrule_free(3)
- Schema definition handling routines
- ldap_modify(3)
- Perform LDAP modify operation
- ldap_modify_ext(3)
- Perform LDAP modify operation
- ldap_modify_ext_s(3)
- Perform LDAP modify operation
- ldap_modify_s(3)
- Perform LDAP modify operation
- ldap_modrdn(3)
- Perform LDAP modify RDN operation
- ldap_modrdn2(3)
- Perform LDAP modify RDN operation
- ldap_modrdn2_s(3)
- Perform LDAP modify RDN operation
- ldap_modrdn_s(3)
- Perform LDAP modify RDN operation
- ldap_mods_free(3)
- Perform LDAP modify operation
- ldap_msgfree(3)
- Wait for result of LDAP operation
- ldap_msgid(3)
- Wait for result of LDAP operation
- ldap_msgtype(3)
- Wait for result of LDAP operation
- ldap_next_attribute(3)
- step through LDAP entry attribs
- ldap_next_entry(3)
- LDAP result entry parsing/counting routines
- ldap_next_message(3)
- Stepping through messages in result chain
- ldap_next_reference(3)
- Stepping through continuation references in result chain
- ldap_objectclass2name(3)
- Schema definition handling routines
- ldap_objectclass2str(3)
- Schema definition handling routines
- ldap_objectclass_free(3)
- Schema definition handling routines
- ldap_open(3)
- Initialize LDAP library/open connection to LDAP server
- ldap_parse_extended_result(3)
- Parsing results
- ldap_parse_reference(3)
- Extract referrals/controls from reference message
- ldap_parse_result(3)
- Parsing results
- ldap_parse_sasl_bind_result(3)
- Parsing results
- ldap_perror(3)
- LDAP protocol error handling routines
- ldap_result(3)
- Wait for result of LDAP operation
- ldap_result2error(3)
- LDAP protocol error handling routines
- ldap_sasl_bind(3)
- LDAP bind routines
- ldap_sasl_bind_s(3)
- LDAP bind routines
- ldap_schema(3)
- Schema definition handling routines
- ldap_scherr2str(3)
- Schema definition handling routines
- ldap_search(3)
- Perform LDAP search operation
- ldap_search_ext(3)
- Perform LDAP search operation
- ldap_search_ext_s(3)
- Perform LDAP search operation
- ldap_search_s(3)
- Perform LDAP search operation
- ldap_search_st(3)
- Perform LDAP search operation
- ldap_simple_bind(3)
- LDAP bind routines
- ldap_simple_bind_s(3)
- LDAP bind routines
- ldap_sort(3)
- LDAP sorting routines
- ldap_sort_entries(3)
- LDAP sorting routines
- ldap_sort_strcasecmp(3)
- LDAP sorting routines
- ldap_sort_values(3)
- LDAP sorting routines
- ldap_str2attributetype(3)
- Schema definition handling routines
- ldap_str2dn(3)
- LDAP DN handling routines
- ldap_str2matchingrule(3)
- Schema definition handling routines
- ldap_str2objectclass(3)
- Schema definition handling routines
- ldap_str2syntax(3)
- Schema definition handling routines
- ldap_syntax2name(3)
- Schema definition handling routines
- ldap_syntax2str(3)
- Schema definition handling routines
- ldap_syntax_free(3)
- Schema definition handling routines
- ldap_table(5)
- Postfix LDAP client config
- ldap_unbind(3)
- LDAP bind routines
- ldap_unbind_ext(3)
- LDAP bind routines
- ldap_unbind_ext_s(3)
- LDAP bind routines
- ldap_unbind_s(3)
- LDAP bind routines
- ldap_url(3)
- LDAP Uniform Resource Locator routines
- ldap_url_parse(3)
- LDAP Uniform Resource Locator routines
- ldap_value_free(3)
- LDAP attrib value handling routines
- ldap_value_free_len(3)
- LDAP attrib value handling routines
- ldapadd(1)
- LDAP modify entry/LDAP add entry tools
- ldapcompare(1)
- LDAP compare tool
- ldapdelete(1)
- LDAP delete entry tool
- ldapmodify(1)
- LDAP modify entry/LDAP add entry tools
- ldapmodrdn(1)
- LDAP rename entry tool
- ldappasswd(1)
- change password of LDAP entry
- ldapsearch(1)
- LDAP search tool
- ldapvi(1)
- LDAP client
- ldapwhoami(1)
- LDAP who am i? tool
- ldapx(n)
- LDAP extended object interface
- ldconfig(8)
- configure dynamic linker run time bindings
- ldd(1)
- print shared library dependencies
- lde(8)
- curses based file system viewer/editor for
- ldexp(3)
- multiply floating-point number by integral power of 2
- ldexpf(3)
- multiply floating-point number by integral power of 2
- ldexpl(3)
- multiply floating-point number by integral power of 2
- ldif(5)
- LDAP Data Interchange Format
- ldirectord(8)
- Director Daemon
- ldiv(3)
- compute quotient/remainder of integer division
- ldmconnect(1)
-
- ldns-chaos(1)
- give some info about nameserver
- ldns-dpa(1)
- DNS Packet Analyzer. Analyze DNS packets in ip trace files
- ldns-key2ds(1)
- transform DNSKEY RR to DS RR
- ldns-keyfetcher(1)
- DNSSEC DNSKEYs for zone
- ldns-keygen(1)
- make keypair/print out public part as DNSKEY RR
- ldns-mx(1)
- print out mx record for domain
- ldns-notify(1)
- notify DNS servers that updates are available
- ldns-read-zone(1)
- read zonefile/print it
- ldns-resolver(1)
- tries to create resolver from resolv.conf file
- ldns-rrsig(1)
- print out inception/expiration dates in human readable form
- ldns-signzone(1)
- sign zonefile with DNSSEC data
- ldns-testns(1)
-
- ldns-update(1)
- send dynamic update packet
- ldns-version(1)
- print out version of ldns-library/tools on this system
- ldns-walk(1)
- contents of DNSSEC signed zone
- ldns-zcat(1)
- reunite split up zone files
- ldns-zsplit(1)
- split up zone file
- ldnsd(1)
- simple daemon example code
- ldp(7)
- Intro to Documentation Project, with help, guides and documents
- leaf(1)
- Lightweight Editor of Ascii Files
- leafnode(8)
- NNTP server for small sites
- leafnode-version(1)
- print leafnode version
- leaftoppm(1)
- convert Interleaf image format to PPM image
- leaveok(3)
- curses output options
- lecs(8)
- ATM LAN Emulation service demons
- lefty(1)
- Programmable Graphics Editor
- legacy_coding(3)
- use terminal's default colors
- les(8)
- ATM LAN Emulation service demons
- less(1)
- opposite of more
- less(3)
- perl pragma to request less of something from compiler
- lessecho(1)
- expand metacharacters
- lesskey(1)
- specify key bindings for less
- lessonfile_editor(1)
- lesson file editor for GNU Solfege
- lesstif(1)
-
- lesstifinternals(3)
-
- let(1)
- bash built-in commands, see bash
- letters-trans(6)
-
- lex(1)
- fast lexical analyzer generator
- lexing(3)
- run-time library for lexers generated by ocamllex
- lfdiff(1)
- compare local files with copies on radmind server
- lfind(3)
- linear search of array
- lft(8)
-
- lftp(1)
- Sophisticated file transfer program
- lftpget(1)
- file with lftp
- lgamma(3)
- log gamma function
- lgamma_r(3)
- log gamma function
- lgammaf(3)
- log gamma function
- lgammaf_r(3)
- log gamma function
- lgammal(3)
- log gamma function
- lgammal_r(3)
- log gamma function
- lgetxattr(2)
- extended attrib value
- lgroupadd(1)
- Add user group
- lgroupdel(1)
- Delete user group
- lgroupmod(1)
- Modify user group
- lh_delete(3)
- dynamic hash table
- lh_doall(3)
- dynamic hash table
- lh_doall_arg(3)
- dynamic hash table
- lh_error(3)
- dynamic hash table
- lh_free(3)
- dynamic hash table
- lh_insert(3)
- dynamic hash table
- lh_new(3)
- dynamic hash table
- lh_node_stats(3)
- LHASH statistics
- lh_node_stats_bio(3)
- LHASH statistics
- lh_node_usage_stats(3)
- LHASH statistics
- lh_node_usage_stats_bio(3)
- LHASH statistics
- lh_retrieve(3)
- dynamic hash table
- lh_stats(3)
- LHASH statistics
- lh_stats_bio(3)
- LHASH statistics
- lhash(3)
- dynamic hash table
- lib(3)
-
- lib3ds-config(1)
- get info about installed version of lib3ds
- libao.conf(5)
- config for libao
- libauth(3)
- routines for writing nnrpd resolvers/authenticators
- libbind-getaddrinfo(3)
-
- libbind-gethostbyname(3)
-
- libbind-getipnodebyname(3)
-
- libbind-getnameinfo(3)
-
- libbind-getnetent(3)
-
- libbind-hesiod(3)
- Hesiod name server interface library
- libbind-hostname(7)
-
- libbind-inet_cidr(3)
-
- libbind-irs.conf(5)
-
- libbind-resolver(3)
-
- libbind-resolver(5)
-
- libblkid(3)
- block device identification library
- libcgi_cgi(3)
-
- libcgi_cookie(3)
-
- libcgi_general(3)
-
- libcgi_session(3)
-
- libcgi_string(3)
-
- libcurl(3)
- client-side URL transfers
- libcurl-easy(3)
- easy interface overview
- libcurl-errors(3)
- error codes in libcurl
- libcurl-multi(3)
- how to use multi interface
- libcurl-share(3)
- how to use share interface
- libcurl-tutorial(3)
- libcurl programming tutorial
- libdoodle(3)
- multi-suffix tree based file search library 0.5.5
- libdskrc(5)
- Custom format definitions for LibDSK programs
- libease(3)
- Easing library for graphical effects/mathimatical functions
- libefence(3)
- Electric Fence Malloc Debugger
- libewf(3)
-
- libexosip2(3)
- libeXosip2
- libexpect(3)
- programmed dialogue library with interactive programs
- libexslt(3)
- extension library for XSLT
- libextractor(3)
- meta-info extraction library 0.5.11
- libextractor-extract(1)
- determine meta-info about file
- libgc(1)
- Garbage collecting malloc replacement
- libgcu(3)
- Gtk widgets/C++ classes related to chemistry
- libgg(7)
-
- libgii(7)
-
- libgii.conf(5)
-
- libgphoto2(3)
- cross-platform digital camera library
- libgphoto2_port(3)
- cross-platform port access library
- libgps(3)
- C service library for communicating with GPS daemon
- libgpsd(3)
- service library for GPS applications
- libgpsmm(3)
- C++ class wrapper for GPS daemon
- libieee1284(3)
- IEEE1284 communications library
- libinn(3)
- InterNetNews library routines
- libinnhist(3)
- routines for managing INN history
- libipmiconsole(3)
- IPMI SOL library
- libipmidetect(3)
- library of functions to determine if node is detected/undetected
- libipmimonitoring(3)
- library for IPMI sensor monitoring
- libipq(3)
- iptables userspace packet queuing library
- liblo(3)
-
- liblolowlevel(3)
-
- libmagic(3)
-
- libmikmod-config(1)
- get info about installed version of libmikmod
- libmng(3)
- Multiple-image Network Graphics Reference Library 1.0.9
- libmpi(7)
- LAM/MPI implementation
- libnet(3)
- libpwrite Network Routine Library
- libnet-1.0(3)
- libpwrite Network Routine Library
- libnetcfg(1)
- configure libnet
- libnetpbm(3)
- general introduction to netpbm library
- libnetpbm_draw(3)
- Libnetpbm PPM Drawing Function Manual
- libnetpbm_image(3)
- overview of netpbm image-processing functions
- libnetpbm_ug(3)
- netpbm sample code
- libnids(3)
- network intrusion detection system E-box library
- libntfs-gnomevfs(8)
- Module for GNOME VFS that allows access to NTFS filesystems
- libopendaap(3)
- library for accessing DAAP shares
- libpat(3)
-
- libpbm(3)
- libnetpbm functions to read/write PBM image files
- libpfm(3)
- helper library to program hardware performance counters of IA-64 CPUs
- libpfm_core(3)
- support for Intel Core processor family
- libpfm_itanium(3)
- support for Itanium specific PMU features
- libpfm_itanium2(3)
- support for Itanium2 specific PMU features
- libpfm_montecito(3)
- support for Itanium 2 9000 processor specific PMU features
- libpfm_p6(3)
- support for Intel P6 processor family
- libpfm_x86_64(3)
- support for AMD X86-64 processor family
- libpgm(3)
- libnetpbm functions to read/write PGM image files
- libpm(3)
- netpbm utility functions
- libpng(3)
- Portable Network Graphics Reference Library 1.2.10
- libpngpf(3)
- Portable Network Graphics Reference Library 1.2.10
- libpnm(3)
- libnetpbm functions to read/write PNM image files
- libpolyxmass(7)
- library package for GNU polyxmass project
- libppm(3)
- functions for PPM programs
- libpvm(3)
- PVM C/Fortran programming libraries
- libraptor(3)
- Raptor RDF parser/serializer library
- library(3)
- How to Build Library
- librasqal(3)
- Rasqal RDF query library
- librsync(3)
- library for delta compression of streams
- libsensors(3)
- publically accessible functions provided by sensors library
- libsmbclient(7)
- extension library for browsers/that can be used as generic browsing API
- libsmi(3)
- library to access SMI management info
- libspectrum(3)
- Sinclair ZX Spectrum support library
- libsres(3)
- send queries/receive responses from DNS name server
- libssh2_banner_set(3)
- set SSH prococol banner for local client
- libssh2_channel_close(3)
- close channel<
- libssh2_channel_direct_tcpip_ex(3)
- Tunnel TCP connection through SSH session
- libssh2_channel_eof(3)
- check channel's EOF status
- libssh2_channel_flush_ex(3)
- flush channel
- libssh2_channel_forward_accept(3)
- accept queued connection
- libssh2_channel_forward_cancel(3)
- cancel forwarded TCP port
- libssh2_channel_forward_listen_ex(3)
- listen to inbound connections
- libssh2_channel_free(3)
- free all resources associated with channel
- libssh2_channel_get_exit_status(3)
- remote exit code
- libssh2_channel_handle_extended_data(3)
- set extended data handling mode
- libssh2_channel_handle_extended_data2(3)
- set extended data handling mode
- libssh2_channel_open_ex(3)
- establish generic session channel
- libssh2_channel_process_startup(3)
- request shell on channel
- libssh2_channel_read_ex(3)
- read data from channel stream
- libssh2_channel_request_pty_ex(3)
- short function description
- libssh2_channel_send_eof(3)
- send EOF to remote server
- libssh2_channel_set_blocking(3)
- set/clear blocking mode on channel
- libssh2_channel_setenv_ex(3)
- set environment variable on channel
- libssh2_channel_wait_eof(3)
- wait for remote to reply to EOF request
- libssh2_channel_x11_req_ex(3)
- request X11 forwarding channel
- libssh2_hostkey_hash(3)
- return hash of remote host's key
- libssh2_poll(3)
- poll for activity on socket, channel or listener
- libssh2_poll_channel_read(3)
- check if data is available
- libssh2_scp_recv(3)
- request remote file via SCP
- libssh2_scp_send_ex(3)
- Send file via SCP
- libssh2_session_abstract(3)
- return pointer to session's abstract pointer
- libssh2_session_callback_set(3)
- set callback function
- libssh2_session_disconnect_ex(3)
- terminate transport layer
- libssh2_session_free(3)
- frees resources associated with session instance
- libssh2_session_init(3)
- initializes SSH session object
- libssh2_session_last_errno(3)
- most recent error number
- libssh2_session_last_error(3)
- most recent error
- libssh2_session_method_pref(3)
- set preferred key exchange method
- libssh2_session_methods(3)
- return currently active algorithms
- libssh2_session_set_blocking(3)
- set/clear blocking mode on session
- libssh2_session_startup(3)
- begin transport layer
- libssh2_sftp_close_handle(3)
- close filehandle
- libssh2_sftp_fstat_ex(3)
- get/set attribs on file handle
- libssh2_sftp_init(3)
-
- libssh2_sftp_last_error(3)
- return last SFTP-specific error code
- libssh2_sftp_mkdir_ex(3)
- create directory on remote file system
- libssh2_sftp_open_ex(3)
-
- libssh2_sftp_read(3)
- read data from SFTP handle
- libssh2_sftp_readdir(3)
- read directory data from SFTP handle
- libssh2_sftp_rename_ex(3)
- rename file
- libssh2_sftp_rmdir_ex(3)
- rename file
- libssh2_sftp_seek(3)
- set read/write position indicator within file
- libssh2_sftp_shutdown(3)
- shut down SFTP session
- libssh2_sftp_stat_ex(3)
- rename file
- libssh2_sftp_symlink_ex(3)
- read/set symbolic link
- libssh2_sftp_tell(3)
- current read/write position indicator for file
- libssh2_sftp_unlink_ex(3)
- rename file
- libssh2_sftp_write(3)
- rename file
- libssh2_userauth_authenticated(3)
- return authentication status
- libssh2_userauth_list(3)
- authentication methods supported by server
- libssh2_userauth_password_ex(3)
- authenticate session with username/password
- libssh2_userauth_publickey_fromfile(3)
- authenticate session with public key, read from file
- libst(3)
- Sound Tools : sound sample file/effects libraries
- libstorage(3)
- InterNetNews Storage API library routines
- libsystem(3)
- run Netpbm program with program input/output
- libtar_hash_add(3)
- hash table routines
- libtar_hash_del(3)
- hash table routines
- libtar_hash_free(3)
- hash table routines
- libtar_hash_getkey(3)
- hash table routines
- libtar_hash_new(3)
- hash table routines
- libtar_hash_next(3)
- hash table routines
- libtar_hash_prev(3)
- hash table routines
- libtar_hash_search(3)
- hash table routines
- libtar_list_add(3)
- linked list routines
- libtar_list_add_str(3)
- linked list routines
- libtar_list_del(3)
- linked list routines
- libtar_list_dup(3)
- linked list routines
- libtar_list_free(3)
- linked list routines
- libtar_list_merge(3)
- linked list routines
- libtar_list_new(3)
- linked list routines
- libtar_list_next(3)
- linked list routines
- libtar_list_prev(3)
- linked list routines
- libtar_list_search(3)
- linked list routines
- libtasn1_perror(3)
- prints string to stderr with description of error
- libtasn1_strerror(3)
- Returns string with description of error
- libtiff(3)
- introduction to libtiff, library for reading and writing TIFF files
- libtmpfile(3)
- tempfile creation routine using TMPFILE
- libtranslate(5)
- libtranslate generic service definitions
- libunwind(3)
- platform-independent unwind API
- libunwind-dynamic(3)
- libunwind-support for runtime-generated code
- libunwind-ia64(3)
- IA-64-specific support in libunwind
- libunwind-ptrace(3)
- ptrace() support in libunwind
- libunwind-setjmp(3)
- libunwind-based non-local gotos
- libuser.conf(5)
- config for libuser/libuser
- libuuid(3)
- DCE compatible Universally Unique Identifier library
- libval(3)
- manage validator context
- libval_check_conf(1)
- program for checking validity of validator config file
- libvga.config(5)
- svgalib config file
- libvga.et4000(5)
- info for Tseng ET4000 users
- libxml(3)
- library used to parse XML files
- libxp(3)
- X Print Client Library
- libxslt(3)
- library used to do XSL transformations on XML documents
- libzip(3)
- library for manipulating zip archives
- lid(1)
- user's groups/group's users
- liebert(8)
- Driver for Liebert contact-closure UPS equipment
- liferea(1)
- RSS/RDF/Atom news aggregator
- light_correct(1)
- correct illumination errors on set of images
- lightning(1)
- draws fractal lightning bolts
- lightning(6)
- draws fractal lightning bolts
- lightningize(1)
- manual page for lightningize 1.2
- lighttpd(1)
- fast, secure and flexible webserver
- lilo(8)
- install boot loader
- lilo.conf(5)
- config file for lilo
- lilypond(1)
- manual page for LilyPond 2.10.33
- lilypond-book(1)
- manual page for lilypond-book 2.10.33
- lilypond-invoke-editor(1)
- manual page for lilypond-invoke-editor 2.10.33
- limits.conf(5)
- config file for pam_limits module
- linalg(n)
- Linear Algebra
- lincity(6)
- city/country simulation game
- lindex(n)
- element from list
- line(3)
- Draws line onto bitmap. Allegro game programming library
- lineak_defaultplugin(1)
- Macro plugin for lineakd daemon
- lineak_kdeplugins(1)
- Macro plugin for lineakd daemon
- lineak_xosdplugin(1)
- On Screen Display plugin for lineakd daemon
- lineakd(1)
- GUI configurable support for multimedia keyboards
- lineart(6)
- test linear frame buffer
- link(1)
- call link function to create link to file
- link(2)
- make new name for file
- link(3)
- link to file
- link_field(3)
- create/destroy form fields
- link_fieldtype(3)
- define validation-field types
- linkat(2)
- create file link relative to directory file descriptors
- linkchecker(1)
- check HTML documents for broken links
- linkedlist(3)
- sigularly linked list
- linkloop(1)
- Link layer connectivity testing
- links(1)
- lynx-like alternative char mode WWW browser
- linkvar(3)
- link Tcl variable to C variable
- linphone(1)
- Gnome interface of linphone, SIP compatible internet phone
- linphonec(1)
- Console interface of linphone, SIP compatible internet phone
- linsert(n)
- Insert elements into list
- lintopvf(1)
- utilities to convert various sound formats
- linux32(8)
- change reported architecture in new program environment/set personality flags
- linux64(8)
- change reported architecture in new program environment/set personality flags
- linux_logo(1)
- Color ANSI penguin logo w/ system info
- linuxdoc(1)
- LinuxDoc DTD SGML converter to other output format
- lio_listio(3)
- directed I/O
- liquidwar(6)
- unique multiplayer wargame
- liquidwar-mapgen(6)
- unique multiplayer wargame
- liquidwar-server(6)
- unique multiplayer wargame
- lircd(8)
- decodes infrared signals/provides them on Unix domain socket
- lircmd(8)
- translates infrared signals into mouse events
- lircrcd(1)
- handle consistent .lircrc state among client applications
- lisa(1)
- draws animated full-loop lisajous figures
- lisa(6)
- draws animated full-loop lissajous figures
- lisp(1)
- CMU Common Lisp programming environment
- lispmtopgm(1)
- convert Lisp Machine bitmap file to PGM
- lissie(1)
- lissajous figure
- lissie(6)
- lissajous figure
- list(3)
- routines
- list(n)
- Create list
- list_audio_tracks(1)
-
- list_config_entries(3)
- Lists names of all entries in config section Allegro game programming library
- list_config_sections(3)
- Lists names of all sections available in current config. Allegro game programming library
- listbasic(1)
- Extract BASIC from ZX Spectrum file
- listbox(n)
- Create/change listbox widgets
- listen(2)
- listen for connections on socket
- listen(3)
- listen for socket connections/limit queue of incoming connections
- listen(7)
- listen for notification
- listlabels(3)
- operations
- listobj(3)
- change Tcl objects as lists
- listres(1)
- resources in widgets
- lists(3)
-
- listxattr(2)
- extended attrib names
- ljlatest(6)
- prints most recent public posts on livejournal.com
- lkbib(1)
- search bibliographic databases
- lket(5)
- Kernel Event Trace tool based on SystemTap
- lket-b2a(1)
- Converting/dumping utility for LKET binary trace data
- llabs(3)
- compute absolute value of integer
- llc(1)
- LLVM static compiler
- lldiv(3)
- compute quotient/remainder of integer division
- llength(n)
- Count number of elements in list
- lli(1)
- directly execute programs from LLVM bitcode
- llistxattr(2)
- extended attrib names
- llrint(3)
- round to nearest integer
- llrintf(3)
- round to nearest integer
- llrintl(3)
- round to nearest integer
- llround(3)
- round to nearest integer, away from zero
- llroundf(3)
- round to nearest integer, away from zero
- llroundl(3)
- round to nearest integer, away from zero
- llseek(2)
- reposition read/write file offset
- llvm-ar(1)
- LLVM archiver
- llvm-as(1)
- LLVM assembler
- llvm-bcanalyzer(1)
- LLVM bitcode analyzer
- llvm-config(1)
- Print LLVM compilation options
- llvm-db(1)
- LLVM debugger
- llvm-dis(1)
- LLVM disassembler
- llvm-extract(1)
- extract function from LLVM module
- llvm-ld(1)
- LLVM linker
- llvm-link(1)
- LLVM linker
- llvm-nm(1)
- LLVM bitcode file's symbol table
- llvm-prof(1)
- print execution profile of LLVM program
- llvm-ranlib(1)
- make index for LLVM archive
- llvm-upgrade(1)
- LLVM assembly upgrade tool
- llvm2cpp(1)
- LLVM bitcode to LLVM C++ IR translator
- llvmc(1)
- LLVM Compiler Driver
- llvmgcc(1)
- LLVM C front-end
- llvmgxx(1)
- LLVM C++ front-end
- lm-profiler(8)
- laptop mode profiler
- lm-profiler.conf(8)
- config file for lm-profiler, profiler for laptop-mode-tools
- lm-syslog-setup(8)
- configure laptop mode to switch syslog.conf based on power state
- lmarbles(6)
- build figures out of colored marbles
- lmconfig_file2mysql(1)
- Perl utility to convert Lemonldap::NG config file into MySQL SQL file
- lmerge(1)
- lmerge combines multiple transcripts into one
- lmhosts(5)
- Samba NetBIOS hosts file
- lmorph(1)
- morphing lines
- lmorph(6)
- morphing lines
- lmove(1)
- move articles into /news/group/number directories
- lmtp(8)
- Postfix SMTP+LMTP client
- lmtpd(8)
- LMTP server process
- lmtptest(1)
- interactive LMTP test program
- ln(1)
- make links between files
- lname(3)
-
- lname_component(3)
-
- lndir(1)
- create shadow directory of symbolic links to another directory tree
- lneato(1)
- Customizable Graph Editor
- lnewusers(1)
- Create new user accounts
- lnstat(8)
- unified network statistics
- load(3)
- control when subroutines will be loaded
- load(7)
- load/reload shared library file
- load(n)
- Load machine code/initialize new commands
- load_bios_font(3)
- Loads 8x8/8x16 BIOS format font. Allegro game programming library
- load_bitmap(3)
- Loads any supported bitmap from file. Allegro game programming library
- load_bitmap_font(3)
- Grabs font from bitmap file. Allegro game programming library
- load_bmp(3)
- Loads BMP bitmap from file. Allegro game programming library
- load_bmp_pf(3)
- Packfile version of load_bmp. Allegro game programming library
- load_dat_font(3)
- Loads FONT from Allegro datafile
- load_datafile(3)
- Loads datafile into memory. Allegro game programming library
- load_datafile_callback(3)
- Loads datafile into memory, calling hook per object. Allegro game programming library
- load_datafile_object(3)
- Loads specific object from datafile. Allegro game programming library
- load_datafile_object_indexed(3)
- Loads single object from datafile index. Allegro game programming library
- load_font(3)
- Loads font from file. Allegro game programming library
- load_grx_font(3)
- Loads GRX format font. Allegro game programming library
- load_grx_or_bios_font(3)
- Loads either BIOS/GRX format font. Allegro game programming library
- load_ibk(3)
- Reads in .IBK patch definition file for Adlib driver. Allegro game programming library
- load_joystick_data(3)
- Loads joystick calibration data. Allegro game programming library
- load_lbm(3)
- Loads LBM bitmap from file. Allegro game programming library
- load_midi(3)
- Loads MIDI file. Allegro game programming library
- load_midi_patches(3)
- Forces MIDI driver to load set of patches. Allegro game programming library
- load_pcx(3)
- Loads PCX bitmap from file. Allegro game programming library
- load_pcx_pf(3)
- Packfile version of load_pcx. Allegro game programming library
- load_policy(8)
- load new SELinux policy into kernel
- load_sample(3)
- Loads sample from file. Allegro game programming library
- load_tga(3)
- Loads TGA bitmap from file. Allegro game programming library
- load_tga_pf(3)
- Packfile version of load_tga. Allegro game programming library
- load_txt_font(3)
- Loads font script. Allegro game programming library
- load_voc(3)
- Loads sample from Creative Labs VOC file. Allegro game programming library
- load_voc_pf(3)
- Packfile version of load_voc. Allegro game programming library
- load_wav(3)
- Loads sample from RIFF WAV file. Allegro game programming library
- load_wav_pf(3)
- Packfile version of load_wav. Allegro game programming library
- loaderinfo(1)
- report SCSI tape device info
- loadgo(1)
- Run programs on LAM nodes
- loadkeys(1)
- load keyboard translation tables
- loadlofig(3)
-
- loadphfig(3)
-
- loadrdsfig(3)
-
- loadrdsparam(3)
-
- loadtk(n)
- Load Tk into safe interpreter
- loadunimap(8)
- load kernel unicode-to-font mapping table
- local(1)
- bash built-in commands, see bash
- local(8)
- Postfix local mail delivery
- local(n)
- create object local to procedure
- locale(1)
- locale-specific info
- locale(3)
- Perl pragma to use/avoid POSIX locales for built-in operations
- locale(5)
- Describes locale definition file
- locale(7)
- Description of multi-language support
- localeconv(3)
- numeric formatting info
- localedef(1)
- compile locale definition files
- localinfo(1)
- local network addresses
- localtime(3)
- transform date/time to broken-down time/ASCII
- localtime_r(3)
- transform date/time to broken-down time/ASCII
- locap(3)
- mbk logical capacitor
- locate(1)
- find files by name
- lock(2)
- unimplemented system calls
- lock(7)
- lock table
- lock_bitmap(3)
- Locks memory used by bitmap. Allegro game programming library
- lock_function(3)
- Locks memory of function used by timer. Allegro game programming library
- lock_midi(3)
- Locks all memory used by MIDI file. Allegro game programming library
- lock_sample(3)
- Locks all memory used by sample. Allegro game programming library
- lock_variable(3)
- Locks memory of variable used by timer. Allegro game programming library
- lockd(8)
- start kernel lockd process
- lockdev(3)
- manage device lockfiles
- lockerd(1)
- Distributed lock handler for Perl IPC::Locker
- lockersh(1)
- Run command under global lock
- lockf(3)
- apply, test or remove POSIX lock on open file
- lockfile(1)
- conditional semaphore-file creator
- lockmail(1)
- create mail lock files
- lockward(6)
- Rotating spinning color-cycling things
- locon(3)
- mbk logical connector
- lofig(3)
- mbk logical figure
- lofigchain(3)
-
- log(1)
-
- log(3)
- natural logarithmic function
- log(n)
- Procedures to log messages of libraries/applications
- log10(3)
- base-10 logarithmic function
- log10f(3)
- base-10 logarithmic function
- log10l(3)
- base-10 logarithmic function
- log1p(3)
- logarithm of 1 plus argument
- log1pf(3)
- logarithm of 1 plus argument
- log1pl(3)
- logarithm of 1 plus argument
- log2(3)
- base-2 logarithmic function
- log2f(3)
- base-2 logarithmic function
- log2l(3)
- base-2 logarithmic function
- log_mf_h(3)
-
- logb(3)
- exponent of floating point value
- logbf(3)
- exponent of floating point value
- logbl(3)
- exponent of floating point value
- logf(3)
- natural logarithmic function
- logfile(3)
- Perl extension for generating reports from logfiles
- logger(1)
-
- logger(n)
- System to control logging of events
- loggerappender(n)
- Collection of predefined appenders for logger
- loggerutils(n)
- Utilities for logger
- login(1)
- sign on
- login(3)
- utmp/wtmp entries
- login.defs(5)
- shadow password suite config
- login.krb5(8)
- kerberos enhanced login program
- login_tty(3)
- tty utility functions
- logjam(1)
- GTK+ client for LiveJournal
- logl(3)
- natural logarithmic function
- logname(1)
- print user's login name
- logout(1)
- bash built-in commands, see bash
- logout(3)
- utmp/wtmp entries
- logresolve(1)
- Resolve IP-addresses to hostnames in Apache log files
- logrotate(8)
- rotates, compresses, and mails system logs
- logsave(8)
- save output of command in logfile
- logwatch(8)
- system log analyzer/reporter
- logwtmp(3)
- append entry to wtmp file
- loins(3)
- mbk logical instance
- longjmp(3)
- non-local jump to saved stack context
- longname(3)
- curses environment query routines
- longrun(1)
-
- look(1)
-
- lookbib(1)
- search bibliographic databases
- lookup_dcookie(2)
- return directory entry's path
- lookupservice(1)
- serve messages over XML-RPC
- loon(1)
-
- loop(1)
- cellular automaton
- loop(6)
- cellular automaton
- loop_until_bit_is_clear(3)
-
- loop_until_bit_is_set(3)
-
- loopctrl(8)
- configure isdnloop ISDN driver
- lore(1)
- convert documentations formats
- lores(3)
- mbk logical resistor
- loself(3)
- mbk logical inductor
- losetup(8)
- set up/control loop devices
- losig(3)
- mbk logical signal
- lostirc(1)
- simple IRC client for X11
- lotrs(3)
- mbk logical transistor
- lout(1)
- prepare Lout document for printing
- lower(n)
- Change window's position in stacking order
- lp(1)
- send files to printer
- lp(4)
- line printer devices
- lp-cups(1)
- print files
- lp5250d(1)
- start AS/400 printer session
- lpadmin(8)
- configure cups printers/classes
- lpasswd(1)
- Change group/user password
- lpattach(2)
- Attach, detach LAM process from remote process management
- lpc-cups(8)
- line printer control program
- lpdetach(2)
- Attach, detach LAM process from remote process management
- lphdisk(8)
- prepare hibernation partition for NoteBIOS suspend-to-disk
- lpinfo(8)
- available devices/drivers
- lpmove(8)
- move job/all jobs to new destination
- lpoptions(1)
- display/set printer options/defaults
- lppasswd(1)
- add, change, or delete digest passwords
- lpq-cups(1)
- printer queue status
- lpr-cups(1)
- print files
- lprm-cups(1)
- cancel print jobs
- lpstat-cups(1)
- print cups status info
- lqtplay(1)
- simple quicktime movie player for X11
- lrand48(3)
- make uniformly distributed pseudo-random numbers
- lrand48_r(3)
- make uniformly distributed pseudo-random numbers reentrantly
- lrange(n)
- Return one/more adjacent elements from list
- lrelease(1)
- make Qt message files from Qt Linguist translation files
- lremovexattr(2)
- remove extended attrib
- lreplace(n)
- Replace elements in list with new elements
- lrint(3)
- round to nearest integer
- lrintf(3)
- round to nearest integer
- lrintl(3)
- round to nearest integer
- lround(3)
- round to nearest integer, away from zero
- lroundf(3)
- round to nearest integer, away from zero
- lroundl(3)
- round to nearest integer, away from zero
- lrs(1)
-
- lrzip(1)
- large-file compression program
- ls(1)
- directory contents
- lsame(l)
- return .TRUE
- lsamen(l)
- test if first N letters of CA are same as first N letters of CB, regardless of case
- lsametst(l)
-
- lsattr(1)
- file attribs on EXT2
- lsb_release(1)
- manual page for FSG lsb_release
- lsdev(8)
- installed hardware
- lsdic(1)
- user dictionary list
- lsdiff(1)
- which files are modified by patch
- lsdvd(1)
- read content info of DVD
- lsearch(3)
- linear search of array
- lsearch(n)
- See if list contains particular element
- lseek(2)
- reposition read/write file offset
- lseek(3)
- move read/write file offset
- lseek64(3)
- reposition 64-bit read/write file offset
- lset(n)
- Change element in list
- lsetfilecon(3)
- set SE security context
- lsetxattr(2)
- set extended attrib value
- lshal(1)
- HAL devices
- lshw(1)
- hardware
- lskrf(1)
- keyrecs in DNSSEC-Tools keyrec file
- lslk(8)
- local locks
- lsmod(8)
-
- lsof(8)
- open files
- lsort(1)
- sort transcripts
- lsort(n)
- Sort elements of list
- lspci(8)
- all PCI devices
- lspcmcia(8)
- PCMCIA card control utility
- lsroll(1)
- rollrecs in DNSSEC-Tools rollrec file
- lss16toppm(1)
- Convert LSS-16 image to PPM
- lsscsi(8)
- SCSI devices/their attribs
- lstat(2)
- file status
- lstat(3)
- symbolic link status
- lstat64(2)
- file status
- lsusb(8)
- USB devices
- ltoa(3)
-
- ltot(3)
- LAM data representation translation suite
- ltrace(1)
- library call tracer
- ltrim(3)
- cut blank spaces from strings
- lua(1)
- Lua interpreter
- luac(1)
- Lua compiler
- luit(1)
- Locale/ISO 2022 support for Unicode terminals
- luma(1)
- LDAP browser, utility and more
- lupdate(1)
- update Qt Linguist translation files
- luseradd(1)
- Add user
- luserdel(1)
- Delete user
- lusermod(1)
- Modify user
- lush(1)
- Lisp Universal Shell
- lv(1)
- Powerful Multilingual File Viewer/Grep
- lvchange(8)
- change attribs of logical volume
- lvconvert(8)
- convert logical volume from linear to mirror/snapshot
- lvcreate(8)
- create logical volume in existing volume group
- lvdisplay(8)
- attribs of logical volume
- lvextend(8)
- extend size of logical volume
- lvm(8)
- LVM2 tools
- lvm.conf(5)
- config file for LVM2
- lvmchange(8)
- change attribs of logical volume manager
- lvmdiskscan(8)
- scan for all devices visible to LVM2
- lvmdump(8)
- create lvm2 info dumps for diagnostic purposes
- lvreduce(8)
- reduce size of logical volume
- lvremove(8)
- remove logical volume
- lvrename(8)
- rename logical volume
- lvresize(8)
- resize logical volume
- lvs(8)
- report info about logical volumes
- lvs.cf(5)
- config file for lvs
- lvscan(8)
- scan for logical volumes
- lvsd(8)
- daemon to control Red Hat clustering services
- lvx(1)
- Logical Versus eXtracted net-list comparator
- lw2(3)
- Perl HTTP library
- lwp(3)
- World-Wide Web library for Perl
- lwp-download(1)
- Fetch large files from web
- lwp-mirror(1)
- Simple mirror utility
- lwp-request(1)
- Simple user agent
- lwp-rget(1)
- web documents recursively
- lwpcook(3)
- libwww-perl cookbook
- lwptut(3)
- LWP Tutorial
- lwres(3)
- introduction to lightweight resolver library
- lwres_addr_parse(3)
- lightweight resolver utility functions
- lwres_buffer(3)
- lightweight resolver buffer management
- lwres_buffer_add(3)
- lightweight resolver buffer management
- lwres_buffer_back(3)
- lightweight resolver buffer management
- lwres_buffer_clear(3)
- lightweight resolver buffer management
- lwres_buffer_first(3)
- lightweight resolver buffer management
- lwres_buffer_forward(3)
- lightweight resolver buffer management
- lwres_buffer_getmem(3)
- lightweight resolver buffer management
- lwres_buffer_getuint16(3)
- lightweight resolver buffer management
- lwres_buffer_getuint32(3)
- lightweight resolver buffer management
- lwres_buffer_getuint8(3)
- lightweight resolver buffer management
- lwres_buffer_init(3)
- lightweight resolver buffer management
- lwres_buffer_invalidate(3)
- lightweight resolver buffer management
- lwres_buffer_putmem(3)
- lightweight resolver buffer management
- lwres_buffer_putuint16(3)
- lightweight resolver buffer management
- lwres_buffer_putuint32(3)
- lightweight resolver buffer management
- lwres_buffer_putuint8(3)
- lightweight resolver buffer management
- lwres_buffer_subtract(3)
- lightweight resolver buffer management
- lwres_conf_clear(3)
- lightweight resolver config
- lwres_conf_get(3)
- lightweight resolver config
- lwres_conf_init(3)
- lightweight resolver config
- lwres_conf_parse(3)
- lightweight resolver config
- lwres_conf_print(3)
- lightweight resolver config
- lwres_config(3)
- lightweight resolver config
- lwres_context(3)
- lightweight resolver context management
- lwres_context_allocmem(3)
- lightweight resolver context management
- lwres_context_create(3)
- lightweight resolver context management
- lwres_context_destroy(3)
- lightweight resolver context management
- lwres_context_freemem(3)
- lightweight resolver context management
- lwres_context_initserial(3)
- lightweight resolver context management
- lwres_context_nextserial(3)
- lightweight resolver context management
- lwres_context_sendrecv(3)
- lightweight resolver context management
- lwres_endhostent(3)
- lightweight resolver get network host entry
- lwres_endhostent_r(3)
- lightweight resolver get network host entry
- lwres_freeaddrinfo(3)
- socket address structure to host/service name
- lwres_freehostent(3)
- lightweight resolver nodename/address translation API
- lwres_gabn(3)
- lightweight resolver getaddrbyname message handling
- lwres_gabnrequest_free(3)
- lightweight resolver getaddrbyname message handling
- lwres_gabnrequest_parse(3)
- lightweight resolver getaddrbyname message handling
- lwres_gabnrequest_render(3)
- lightweight resolver getaddrbyname message handling
- lwres_gabnresponse_free(3)
- lightweight resolver getaddrbyname message handling
- lwres_gabnresponse_parse(3)
- lightweight resolver getaddrbyname message handling
- lwres_gabnresponse_render(3)
- lightweight resolver getaddrbyname message handling
- lwres_gai_strerror(3)
- print suitable error string
- lwres_getaddrinfo(3)
- socket address structure to host/service name
- lwres_getaddrsbyname(3)
- lightweight resolver utility functions
- lwres_gethostbyaddr(3)
- lightweight resolver get network host entry
- lwres_gethostbyaddr_r(3)
- lightweight resolver get network host entry
- lwres_gethostbyname(3)
- lightweight resolver get network host entry
- lwres_gethostbyname2(3)
- lightweight resolver get network host entry
- lwres_gethostbyname_r(3)
- lightweight resolver get network host entry
- lwres_gethostent(3)
- lightweight resolver get network host entry
- lwres_gethostent_r(3)
- lightweight resolver get network host entry
- lwres_getipnode(3)
- lightweight resolver nodename/address translation API
- lwres_getipnodebyaddr(3)
- lightweight resolver nodename/address translation API
- lwres_getipnodebyname(3)
- lightweight resolver nodename/address translation API
- lwres_getnamebyaddr(3)
- lightweight resolver utility functions
- lwres_getnameinfo(3)
- lightweight resolver socket address structure to hostname/service name
- lwres_getrrsetbyname(3)
- DNS records
- lwres_gnba(3)
- lightweight resolver getnamebyaddress message handling
- lwres_gnbarequest_free(3)
- lightweight resolver getnamebyaddress message handling
- lwres_gnbarequest_parse(3)
- lightweight resolver getnamebyaddress message handling
- lwres_gnbarequest_render(3)
- lightweight resolver getnamebyaddress message handling
- lwres_gnbaresponse_free(3)
- lightweight resolver getnamebyaddress message handling
- lwres_gnbaresponse_parse(3)
- lightweight resolver getnamebyaddress message handling
- lwres_gnbaresponse_render(3)
- lightweight resolver getnamebyaddress message handling
- lwres_herror(3)
- lightweight resolver error message generation
- lwres_hstrerror(3)
- lightweight resolver error message generation
- lwres_inetntop(3)
- lightweight resolver IP address presentation
- lwres_lwpacket_parseheader(3)
- lightweight resolver packet handling functions
- lwres_lwpacket_renderheader(3)
- lightweight resolver packet handling functions
- lwres_net_ntop(3)
- lightweight resolver IP address presentation
- lwres_noop(3)
- lightweight resolver no-op message handling
- lwres_nooprequest_free(3)
- lightweight resolver no-op message handling
- lwres_nooprequest_parse(3)
- lightweight resolver no-op message handling
- lwres_nooprequest_render(3)
- lightweight resolver no-op message handling
- lwres_noopresponse_free(3)
- lightweight resolver no-op message handling
- lwres_noopresponse_parse(3)
- lightweight resolver no-op message handling
- lwres_noopresponse_render(3)
- lightweight resolver no-op message handling
- lwres_packet(3)
- lightweight resolver packet handling functions
- lwres_resutil(3)
- lightweight resolver utility functions
- lwres_sethostent(3)
- lightweight resolver get network host entry
- lwres_sethostent_r(3)
- lightweight resolver get network host entry
- lwres_string_parse(3)
- lightweight resolver utility functions
- lwresd(8)
- lightweight resolver daemon
- lxdvdrip(1)
- dvd backup tool
- lxt2miner(1)
- Data mining of LXT2 files
- lxt2vcd(1)
- Coverts LXT2 files to VCD
- lynx(1)
- general purpose distributed info browser for WWW
- lynx_parse(1)
- simple utility to convert Lynx bookmarks to XBEL
- lyx(1)
- Document Processor
- lyxclient(1)
- send commands to running LyX editor
- lzcat(1)
- LZMA compression/decompression tool
- lzcmp(1)
- compare LZMA compressed files
- lzdiff(1)
- compare LZMA compressed files
- lzegrep(1)
- search LZMA compressed files for regex
- lzfgrep(1)
- search LZMA compressed files for regex
- lzgrep(1)
- search LZMA compressed files for regex
- lzless(1)
- view LZMA compressed files
- lzma(1)
- LZMA compression/decompression tool
- lzmadec(1)
- small/fast LZMA decoder
- lzmainfo(1)
- infomation stored in LZMA compressed file header
- lzmore(1)
- view LZMA compressed files
- lzop(1)
- compress/expand files
- lzss_pack_data(3)
- Opaque structure for handling LZSS comression. Allegro game programming library
- lzss_read(3)
- Decompresses data using LZSS. Allegro game programming library
- lzss_unpack_data(3)
- Opaque structure for handling LZSS decomression. Allegro game programming library
- lzss_write(3)
- Compresses data using LZSS. Allegro game programming library